Swartland Cape Culture

CAPE CULTURE

COLLECTIONHAN DCR AFTED TO PER FECTION

www.swartland.co.za 1

CONTENTS

DOUBLE-GLAZED

SLIDING SASH

MOCK SASH

HORIZONTAL GLIDING

FULL PANE

SMALL PANE

TOP HUNG

ENTRANCE

BACK

PATIO

INTERIOR

FOLD-A-SIDE

SLIDING

DOORS

DOOR FRAMES

ACCESSORIES

BUILDERS’ SECTION

SECTIONS

SPECIFICATIONS

WINDOWS

7

15

17

19

21

23

25

28

34

36

40

43

45

46

47

48

52

54

3

ABOUT SWARTLAND

www.swartland.co.za

STARTING SMALL, THINKING BIG

The Swartland story began in 1951 with ‘Oupa’ Hanekom

in the small town of Moorreesburg, a few wheat fields north

of Cape Town. He started supplying the local community

with hardware and electrical goods, but Oupa’s ambitions

lay far beyond the boundaries of Moorreesburg, and it

wasn’t long before joinery became Swartland’s specialty.

When Oupa’s son, ‘Oom’ Jurgens, took over the reins,

he brought new ideas to the business. One of them was his

personal philosophy of ‘continuous improvement’.

Today, this desire to constantly improve is an integral

part of the Swartland culture. It’s a place where traditional

values, such as hard work and pride in our craft, live in

harmony with new technology and inspired ideas.

The results speak for themselves – windows and doors

crafted to perfection and manufactured to last.

Our ranges offer the leading products in their class:

• Cape Culture Collection

Cape Culture offers an unrivalled 10 Year Guarantee*,

backed up by knowledgeable national service teams.

Our management systems have been approved by the

stringent South African Bureau of Standards and we are both

authorised and entitled to use the SABS ISO 9001 logo.

*TERMS AND CONDITIONS APPLY.

5

ABOUT SWARTLAND

www.swartland.co.za

THINK LONG TERM

‘Think Long Term’ guides us in everything we do,

from how we make our products, to how we source our

raw materials, to the value we place on relationships.

Our commitment to increased energy efficiency and

environmental sustainability is deeply ingrained.

We pride ourselves on our integrity and insist that

environmental resources be utilised in a sustainable way.

IN THE FOREST

We give preference to responsible loggers.

We monitor the harvesting process on-site, because with

responsible management, wood is a renewable resource.

IN THE FACTORY

Our processes are focused on reducing waste.

Our innovative recycling system uses excess wood chips to

fuel the boilers that kiln-dry our wood, and our hi-tech

air-management system dramatically reduces emissions.

IN THE HOME

Our products are designed to improve your home’s

thermal performance, keeping it as warm or cool as

you prefer. We’ve recently introduced Double-Glazed

windows to the market. Independent tests have proved

them to be the most energy-efficient windows in South

Africa. The inclusion of rubber seals on all windows

and selected doors also reduces temperature loss.

Wood is an extremely efficient insulator and its

carbon footprint is much smaller than other materials:

it takes 6.34 times the amount of energy to make an

aluminum window, 4.41 times to make a steel window

and 11.7 times to make a uPVC window* – than to

make the equivalent window from treated wood.

We’re fully committed to preserving our environment,

this process is on-going and continuously improving.

After all, we think long term.

*ACCORDING TO LAWSON’S MODEL.

7

SWARTLAND SOLUTIONS

www.swartland.co.za

Thicker wood sections improve the thermal and

security properties of the window.

Rubber sealsform an air-lock

between the frameand casement

– which improvesthermal insulation.

DOUBLE-GLAZING

Swartland is proud to introduce our Double-Glazed

wooden windows to South Africa. Exclusive to

the Cape Culture Collection, this window is the most

energy-efficient tested window on the market.

Thicker wood sections, all-round rubber seals

and two panes of glass with a space sandwiched

in between, ensure increased thermal insulation and

soundproofing, while imported German-engineered

locking systems provide enhanced security.

All of which makes double-glazing the unrivalled

choice for those who want the best in aesthetic appeal,

construction and environmental performance.

Friction hinge –specially designedto handle the extraglass and thickerwindow frame.

Stainless steel, thumb-release handle.

Available in white, chrome and gold finish.

Double glazing comprises of two panes of glass, separated by

dehydrated air.

Multiple lockingmechanism ensures

a tight fit andenhances security.

This Double-Glazed window, with Low E glass, has a

U-Value of 1.9

CUSTOM MADE TO ORDER ONLY

“We knew we wanted double-glazing but

we weren’t sure whether to go with wood

or aluminium windows. Ultimately we found

that wood was better for the environment. It’s

renewable and has a lower carbon footprint.

And it just looks better.”

RIAAN ‘DIE NUTSMAN’ GARFORTH-VENTER

SWARTLAND SOLUTIONS

www.swartland.co.za 9

PRE-SEALED, PRE-GLAZED

Our new pre-sealed, pre-glazed products are designed

to make your life easier by saving you time and money.

To increase their ability to withstand the elements they

are sealed with our unique sealant, Maxicare®. This makes

them more water repellent and decay resistant, and helps

protect the wood from fungal attack and UV radiation.

To ensure these windows stand the test of time, we use

solid brass handles and stainless steel hinges.

GLAZING

These windows are available in different glazing

configurations, from 3 – 6mm clear glass, 6.38mm

laminated, toughened glass and 4mm Obscure glass.

WHAT ARE U-VALUES?

U-value is the rate at which heat is transmitted through

the arrangement of windows and doors in a building. It takes

into account all the components that make up the window or

door, such as the frame, the space between the two panes and

the glass itself. Glass coatings and the type of gas used between

the glass panes also form part of the U-value calculation.

Each glazing option has a different U-value and each

delivers different levels of thermal performance.

Some options are more resistant to impact, while others

offer better thermal and sound insulation.

For information on the glazing combinations that will

best suit your needs, please contact us on 086 110 2425.

HOW TO ORDER

Our pre-sealed, pre-glazed option is available

on all Cape Culture products, and can be ordered

through all leading builders merchants.

When ordering please specify a Maxicare® colour.

For assistance please contact us on 086 110 2425.“We’re very proud that our products

and systems are leading the way in energy

efficiency and sustainable design.

We’re continuously striving to improve our

environmental performance, our process

is on-going and we’re committed to it.”

JURIE HANEKOMSWARTLAND

11

CAPE CULTURE

www.swartland.co.za


CAPE CULTURE COLLECTION

Unique to our flagship range of windows and doors are:

• Energy efficient Double-Glazed windows

• The classic Sliding Sash window

• The Horizontal Gliding window

All products in this range have thicker timber sections

for added stability and aesthetic appeal, and come fitted

with rubber seals for increased thermal performance.

CUSTOM DESIGNS

For a dramatic statement or to allow even more

light in, we’ll design a window or door to your

specifications. When something special is called for,

call us, we can custom make it for you.

10 YEAR GUARANTEE

All products in this collection carry a manufacturer’s

10 YEAR Guarantee* for craftsmanship and for the kiln-

dried timber. This guarantee is subject to maintenance

conditions and building specifications, and for it to be

certified, all products must be sealed with Maxicare® in

accordance with the Easicare Maintenance Programme.

KILN-DRIED TO 8%

As part of our environmental responsibility, we have

always strived to make quality products that are durable

and long lasting. Which is why we kiln-dry our wood

to a moisture content of 8%. This process helps

keep the wood in perfect balance with atmospheric

conditions, thereby stabilising the timber and

minimising movement or warping.

AFTER SALES SERVICE

Our promise of quality doesn’t stop when you purchase

a Swartland product. Should an adjustment be required,

our service teams will respond to your needs promptly and

efficiently. All you need to do is to call us on 086 011 2425.

“I had a very specific idea for the

windows in my dream house. I was

worried that nobody would be able to

make it. But Swartland made exactly

what I wanted, and the service was

very professional and friendly.”

MR J DU PLESSISHOMEOWNER, GORDONS BAY

Sliding Sash has nylon pulleys, passivated

galvanised rope guides with synthetic rope and rope covers

Treated with a transitstabiliser & outer frame

painted with a whitePVA primer

139mm x 68mm thickwood sections

Mortise & Tenonsoild wood sash

Glazing beads

Solid brass catchon Sliding Sash

DPC plastic on frame

Mortise & Tenonsolid wood frame

All edges profiled“Wood adds warmth to my home

in a way I can’t really describe.

I suppose wood has been with us

since the dawn of civilisation. It just

felt like the natural choice.”

www.swartland.co.za

PIECE DE RESISTANCE

This exclusive collection offers exquisite pieces,

crafted to perfection, and manufactured to the highest

standards, and with energy-efficient U-ratings.

Catering for those who expect nothing but the best,

the design leadership and environmental performance

of this range are without peer. Stainless steel hinges,

solid brass handles and rubber seals are standard.

7 Rubber sealsstandard all round

MRS LINDSEY HATZHOMEOWNER, KENILWORTH

13

CAPE CULTURE WINDOWS

FOR THE FULL RANGE, PLEASE REFER TO SPECIFICATIONS STARTING ON PG 54.

FULL GLASS

VICTORIAN CAPE DUTCH

15

SLIDING SASH

www.swartland.co.za

GOLDEN OLDIES

The Sliding Sash is where timeless elegance meets

modern technology, and is proof that classic design is

always in style. Drawing inspiration from the Full Glass,

Victorian and Cape Dutch classics, the Sliding Sash looks at

home in both contemporary and traditional architecture.

LOUVRE SHUTTERSAdd character and ventilation to your home with

Louvre Shutters. A full range of shutters is available

to complement our Sliding Sash Windows.

“Swartland’s Sliding sash windows and

Fold-a-Side doors provided my house

with the finishing touches to guarantee

excellent quality and outstanding service

converting it into the best home it could

possibly be, natural and warm”

RYAN FOWLSMORNINGSIDE, GAUTENG


CAPE MOCK SASH

BOX MOCK SASH

17

MOCK SASH

www.swartland.co.za

FUTURE CLASSICS

With the heritage and elegance of the classic

Sliding Sash, the Box Mock or the Cape Mock Sash

is the cost-effective way to get the sash look.

A thicker wooden frame distinguishes the

Box Mock from the Cape Mock Sash. Both styles

are made to Swartland’s superior standards.

It’s very rare these days to find

a company who’s willing to

stand by it’s products. I think it

says a lot about their values”

ROB LAUTERBACHROBBACH CONSTRUCTION, KZN


19

HORIZONTAL GLIDING

www.swartland.co.za

LATERAL THINKING

This window innovation is a revelation.

It allows walls to disappear in an instant, and

it’s exceptional gliding mechanism ensures it

glides open as effortlessly as it closes.

Like all Cape Culture products, this window offers

outstanding thermal performance. Factory-fitted

rubber seals will keep the desired temperature within.

As a security feature, the sliding leaf is on the inside

of the window, and it comes fitted with a lock.

Small pane windows are available on request.


21

FULL PANE

www.swartland.co.za

PICTURE PERFECT

Full Pane windows provide maximum ventilation

with the minimum frame, and are the perfect way to

integrate the room and the view. Their side-hung

design catches the breeze, and helps create a sense of

space that perfectly complements open plan living.

Increase ventilation by adding a fanlight,

designed to release warm rising air.


23

SMALL PANE

www.swartland.co.za

LASTING IMPRESSION

Often called ‘cottage pane’ the divided

light of these popular windows adds a classic

beauty to any room. As with everything

we make, performance is crucial, so expect these

casement windows to swing open smoothly for

ventilation, and seal tightly for optimal

thermal insulation. Precisely fitted burglar

bars are available on request.

“We chose Swartland because

our home is an investment, and

while the quality of our life is

important right now, we’re also

adding value when we sell.”

TAMMY KELLYHOMEOWNER, HILLCREST


25

TOP HUNG

www.swartland.co.za

TOP PERFORMER

These windows, also known as awning windows,

open from the bottom, letting the air circulate freely

while providing a protective shield from the elements.

Rubber seals provide outstanding thermal

insulation, giving you a versatile, modernist design

combined with practical performance.

“A big factor in our choice of windows was

that Swartland has been around for so long.

We didn’t want to buy from a company that

might not be around in a year or so. We

wanted to be sure we had a guarantee.”

GREG BELLARS GSP ARCHITECTS, PIETERMARITZBURG


27

CAPE CULTURE DOORS

High quality brasspivot mechanism

Stainless steel barrel lock

Treated with a transitstabiliser & outer frame

painted with a whitePVA primer

Bottom of doorscome pre-sealed

Large selectionof standard sizes.

2032mm (h) x

1200mm (w)

Also available in2400mm (h)

x 1500mm (w)

“I’ve got so many things to worry about on

site. The last thing I need is for the joinery

to be late. I know Swartland will deliver on

time, everytime. And now if I order their

Pivot doors, they come pre-hung. Bonus.”

www.swartland.co.za

WE MAKE AN ENTRANCE

Cape Culture doors are without peer.

We focus our attention and craftsmanship not

only on aesthetics, but on performance too.

We are particularly proud of our exclusive

Pre-hung Pivot doors. For your convenience, these

doors are fully assembled, with the door already

fixed to the frame. A steel top pivot point makes it

easy to adjust and to remove for maintenance, while

the brass bottom pivot point has a bearing action.

We have a large selection of standard sizes available,

in both traditional and contemporary designs.

BELINDA ANNE QUESNELGROUNDWORKS TRADING (MEMBER)

DIFSD16P/1.2

PIVOT DOORS IN FRAME STANDARD PIVOT DOORS

28

SD30P

SD31P SD24P

SD16P

SD25P(0,933)

SD26P

BO

LEC

TIO

N M

OU

LD

NO

BO

LEC

TIO

N M

OU

LD

140mm

905m

m29

STANDARD SIZES OF THESE DOORS ARE 1348mm WIDE x 2144mm HIGH

Doors viewed from outside. Available on request at 2400mm high & 1500mm wide. Figures in brackets indicate estimated glass area.

STANDARD SIZES OF THESE DOORS ARE 1200mm WIDE x 2032mm HIGH

Doors viewed from outside. Figures in brackets indicate estimated glass area.

DIFSD30P/1.2

DIFSD24P/1.2 DIFSD26P/1.2

DIFSD31P/1.2

DIFSD25P/1.2(0,933)

DIFSD16P/1.2

ENTRANCE ENTRANCE DOORS

www.swartland.co.zawww.swartland.co.za

905m

m90

5mm

905m

m

905m

m

30 31

SD 16P/1.5 SD 16/2.4SD 15/2.4 SD 17/2.4 SD 18/2.4Available in 18S/2.4 Stable Door

(0,746)

SD 19/2.4(0,718)

SD 26/2.4 SD 30/2.4 SD 31/2.4SD 24/2.4 SD 25/2.4(0,748)

SD 26P/1.5 SD 30P/1.5

SD 24P/1.5

SD 31P/1.5

SD 25P/1.5(1,236)

AVAILABLE IN 813mm WIDE x 2400mm HIGH


AVAILABLE IN 1500mm WIDE x 2400mm HIGH


PIVOT DOORS 2.4m HIGH DOORS

ENTRANCE DOORS ENTRANCE DOORS


BO

LEC

TIO

N M

OU

LD

BO

LEC

TIO

N M

OU

LD

BO

LEC

TIO

N M

OU

LD

BO

LEC

TIO

N M

OU

LD

BO

LEC

TIO

N M

OU

LD

32

STANDARD SIZES ARE 813mm WIDE x 2032mm HIGH

Doors viewed from outside. 2400mm available on request.

STANDARD SIZES ARE 813mm WIDE x 2032mm HIGH

Doors viewed from outside. 2400mm available on request. Figures in brackets indicate estimated glass area.

SD15

SD17 SD18(0,547)

Available in SD18S

SD16S

SD16

140mm

1425

mm

SD24Available in SD24S

SD19(0,523)

SD26

SD19S(0,441)

SD25(0,547)

33

SD31

SD30

140mm

ENTRANCE DOORS ENTRANCE DOORS

BOLECTION MOULD AND OTHER ENTRANCE DOORSBOLECTION MOULD, RAISED AND FIELDED PANEL DOORS


905m

m

905m

m90

5mm

905m

m

905m

m

905m

m90

5mm

905m

m

817m

m

NO

BO

LEC

TIO

N M

OU

LD

NO

BO

LEC

TIO

N M

OU

LD

OTH

ER

SD14S(0,509)

SD21Louvre Door

SD12Gate

SD14(0,525)

34

BACK DOORS

STANDARD SIZES ARE 813mm WIDE x 2032mm HIGH EXCEPT SD12


STANDARD SIZES ARE 813mm WIDE x 2032mm

Doors viewed from outside. Figures in brackets indicate estimated glass area.When ordering double doors, please indicate if open-in or open-out is required.

SD2

SD2S

35

BACK DOORS

SD2/1612 SD6(0.516)

TRADITIONAL & OTHERTRADITIONAL & OTHER


1080

mm

1080

mm

1080

mm

905m

m18

00m

m

36

STANDARD SIZES ARE 813mm, 1210mm, 1612mm WIDE x 2400mm HIGH


SD7/1612/2.4(2,258)

2.4m HIGH

SD7/2.4(1,129)

SD20/2.4(1,060)

SD20/1210/2.4(1,350)

SD7/1210/2.4(1,424)

SD20/1612/2.4(2,120)

37



SD20(0,897)

SD20/1210(1,138)

SD20/1612(1,771)

SD7/1612(1,878)

SD7(0,939)

SD7/1210(1,184)

PATIO DOORS PATIO DOORS

STANDARD HEIGHT


905m

m

905m

m

905m

m

905m

m

905m

m

905m

m

38

SD10(0,908)

SD10/1210(1,190)

SD10/1612(1,816)

140mm

SD11(0,897)

SD11/1210(1,196)

SD11/1612(1,794)

SD22(0,701)

SD22/1210(0,938)

SD22/1612(1,409)


Doors viewed from outside. Figures in brackets indicate estimated glass area. Available at 2400mm high on request.When ordering double doors, please indicate if open-in or open-out is required.


Doors viewed from outside. Figures in brackets indicate estimated glass area. Available at 2400mm high on request.When ordering double doors, please indicate if open-in or open-out is required.

SD23(0,731)

SD23/1210(0,990)

SD23/1612(1,462)

105mm

105mm

130mm

130mm

39

PATIO DOORS PATIO DOORS

PATIO DOORS WITH GUNSTOCK STILESMALL PANE DESIGN


750m

m

750m

m

750m

m75

0mm

750m

m

750m

m

41

AVAILABLE IN 813mm x 2032mm, 2400mm ON REQUESTStandard MDF Doors are not fire rated

www.swartland.co.za

MDF – COLONISTMDFCLNHI0

Interior MediumDensity FibreHeavy Duty

813 x 2032 EE

MDF – ELEGANCEMDFELGHI0


813 x 2032 EE

MDF – HORIZONTALMDFHRZHI0


813 x 2032 EE

MDF – SD16MDFSD16HI0


813 x 2032 EE

MDF – CLASSIQUEMDFCSSHI0


813 x 2032 EE

MDF – CANTEBURYMDFCTBHI0


813 x 2032 EE

INTERIOR DOORS

MDF DOORS

Suitable for high traffic usage Suitable for high traffic usage

Seal on all six(6) sides Seal on all six(6) sides

Usage

Treatment

DOOR APPLICATIONS

Semi-Exterior DoorsFully Exterior Doors

Suitable for direct exposureto the elements

Do not expose to direct elements(sun & rain)Exposure

Usage

Treatment

DOOR APPLICATIONS

Exposure No exposure toelements

No exposure toelements



Suitable for lowtraffic usage

Suitable for med traffic usage

Suitable for hightraffic usage

Suitable for 1/2hour fire rating

Seal on all six(6)sides




Interior DoorLight Duty Medium Duty Heavy Duty Fire Doors

New Bi-Fold options available on request: All doors open out (As viewed from outside)

2 door: Bi-Fold 3 door: Bi-Fold 4 door: Bi-Fold

oror

or or

or

or

5 door: Bi-Fold 5 door: Bi-Fold 6 door: Bi-Fold

43

FOLD -A-SIDE DOORS

83x68

MRS M MORGANHOMEOWNER, CAPE TOWN

“The fold-a-side doors I had put in

look great, and work really well.

They added a whole new dimension

to the house by letting the garden

become part of the inside.”

www.swartland.co.za

OPENING SPECIALS

These custom-made doors will fold aside

effortlessly, virtually disappearing when open.

Available in 3, 4, 5 and 6 leaf configurations these

doors are the perfect way to enjoy the fresh air

and spaciousness of outdoor living. Rubber seals

provide exceptional thermal insulation as well

as an effective weather and sound barrier.

A WIDE SELECTION OF STYLES TO CHOOSE FROM

2120

mm

Please Note: Tolerances sizes of up to 20mm can be experienced in width.

Configurations for 813mm doors: All doors open out (As viewed from outside)

3 door: 2570 wide x 2120 high


3 doors stacking right

3 doors stacking left

5 doors stacking right

5 doors stacking left



1 door opening left& 3 doors stacking right





*Estimated Glass Sizes

45

SLIDING DOORS

www.swartland.co.za

FULL PANE SINGLE SLIDERS

FULL PANE DOUBLE SLIDERS SMALL PANE DOUBLE SLIDERS

Code

Code

Code

Code

CSDL 1.8

CDSL3.120

CDSL3.515

CDSL4.115

1782

3112

3507

4107

1782

2082

2382

2982

3582

3112

3507

4107

2140

2140 2140

2140(2.443)

(4.154) (4.154)

(4.886)

(5.862)

(4.886)

(2.443)

(2.931) (2.931)

(3.440) (3.440)

(4.484) (4.484)

(5.527) (5.527)

2140

2140 2140

2140

2140

2140 2140

2140

2140 2140

2140 2140

2082

2382

2982

3582

CSDPL 1.8

CSDPL 2.1

CSDPL 2.4

CSDPL 3.0

CSDPL 3.6

CDSPL 3.120

CDSPL 3.515

CSDL 2.1

CSDL 2.4

CSDL 3.0

CSDL 3.6

Width

Width

Width

Width

Height

Height

Height

Height

SMALL PANE SINGLE SLIDERS

OPPORTUNITY KNOCKS

With engineered stiles for extra stability and

an imported German Siegenia Lift Up Locking

Gear, (which locks from the inside only), these

doors provide a stunning bridge between your

indoor sanctuary and the great outdoors.

Fitted rubber seals keep out dust, drafts and rain

and achieve optimal thermal insulation.

Available in full pane or small pane.

Glass Size* Glass Size*

Glass Size* Glass Size*

(5.862) CDSPL 4.115

90 x 70

45

41/44

46

DOOR FRAMES

47

ACCES SORIES

As viewed from outside. When ordering doors frames with sill, customers to stipulate whether the doors are open inwards or outwards.

SK1/813with sill

SKLSO(0,691)

SKLSN(0,694)

SKLSP(0,595)

SKRSP(0,595)

SKRSN(0,694)

SKLRSP(1,177)

SKLRSN(1,388)

SK1R

SK4P/WS

86 x 4486 x 44

Door

Open-in-sill Open-out-sill

86 x 6886 x 68

SK4P/NS

HORIZONTAL SECTION

RECOMMENDED DOORSECTION

We recommend a door width of41 - 44mm for the Cape Culture

door frame range.

rubber seal

SKRSO(0,691)

SKLRSO(1,383)

SK1B(0,256)

SK2B(0,377)Available with top cement on request

SK3B(0,058)

SK1/813no sill

SK2/1210with sill

SK2/1210no sill

SK3/1612with sill

SK3/1612no sill

SK1 RSP SK2 RFG SK2 RSP SK3 RFG SK3 RSPSK1 RFG

RO

UN

D T

OP

SD

OO

R F

RA

ME

SFR

AM

ES

WIT

H S

ILL

AN

D S

IDE

LIG

HTS

905m

m

905m

m

905m

m

462

522

522


BURGLAR BARS

Built-in burglar bars are custom-made, and

penetrate into the wooden frame for increased

security. They are available on all windows,

except for Sliding Sash and Box Mock windows.

Specify burglar bars when ordering.

ROUND TOPSWe offer a range of stunning Round Top window

options to accompany all standard window shapes.

These are a wonderful way to let in more light.

Available in both small pane and full pane.

MAXICARE SEALANT

To maintain the natural beauty of wood, Swartland

recommends Maxicare®, a unique sealant we’ve developed

to give lasting protection for wooden windows and doors.

It’s UV resistant, water repellent and contains anti-fungal

agents and for the Guarantee* to be certified,

all wood must be treated with Maxicare®, in conjunction

with the Swartland Easicare Maintenance Program.

®


IMBUIA LIGHT OAK MAHOGANY TEAK WHITE

GL2GL1

350mm500mm

600m

m

800m

m

GABLE LOUVRESGable Louvres are available on request.

48 49www.swartland.co.zawww.swartland.co.za

Pre-sealed, pre-glazed products can be ordered through all leading merchants. Because lead times may vary, please confirm the delivery time with your Swartland representative. Products can be pre-sealed in any of the four Maxicare® Waterbased colours.

Protection: All pre-sealed, pre-glazed products come wrapped in plastic to protect them during transit and installation.

Delivery: Swartland will deliver directly to your site. Before ordering, contact Swartland to help you choose your product, Maxicare® colour and glass specifications.

Save time and money with our new pre-sealed and pre-glazed windows and doors.Please follow the installation recommendations below.

Products are sealed and thenglazed in our factory.

After glazing the beading isrefitted and secured with silicon.

Products are wrappedin plastic for protection

during transit and installation.

DPC must protrude out at least20mm on the left, right and top sides.

The window opening width must be 20-30mm wider than the window. The height of the opening must be one brick height, plus 20-30mm,

higher than the product.

Window must be installedbefore plastering.

The builder must ensure that theopening for the window is 100% square.

Galvanized lugs secure thewindow to the wall.

PRE-SEALED, PRE-GLAZED WINDOWS

A A A A

B

B

B

B

A A

DPC must protrude out atleast 20mm on both sides

Windows fixedwith lugs

Builder toadd plasterand siliconein cornersfor properwater seal

STEP 1 Opening without window

STEP 2 Opening with window installed

STEP 3 Opening with window finished

window height+

brick width +

(20 - 30mm)

DPC at thebottom ofthe windowsupplied bySwartland

SECTION BB SECTION BB

SECTION AA SECTION AA SECTION AA

Builders toadd plasterand siliconein cornersfor properwater seals

PU Foam to applied to cavity

windows width+ 20 - 30mm

windows width+ 20 - 30mminside inside

inside inside

inside

outside outside

outside outside

outside

• Windows will be glazed to industry standards. • Please specify glass specifications on your order.

When installing glass, please take note of the following installation procedures and safety regulations, in accordance with SANS 10137 Code of Practice - the installation of Glazing in Buildings. Typical Safety Glazing Materials are: Toughened Glass* and Laminated Safety Glass conforming to SANS 1263 Part 1.

*Toughened Glass can only be used in overhead glazing, when having all round edge support.

Note: SANS 10400 Part N is currently under review. When published, the information provided will be affected.

BUILDERS’ SECTIONBUILDERS’ SECTION

GLAZING

All Safety Glazing materials (individual panes) shall be permanently marked.Such marking to be visible after glazing.

Ask your Glazier/Developer for a SAGGA certificate of conformance.

If it is not marked, it is not Safety Glass.

All skylights, overhead and sloped glazing shall be of Safety Glazing materials conforming to SANS 1263.

Where any bath enclosure or shower cubicle is constructed of glass, such material shall be glazed with safety glass.

Wired glass is not regarded as Safety Glazing material unless it conforms to SANS 1263 Part 1.

Nominalglass

thicknessin mm

0.751.502.103.20

3456

Maxiumsize of

pane in m

Safety glazingthroughout includingglass fins whereapplicable. (Monolithic annealedglass should not be used!)

Shopfronts Shopfronts Shopfronts Display Windows

Safety glazing up to2100 mm from FFL.Not required forpanes above 2100 mmfrom FFL.

Safety glazingthroughoutirrespectiveof dimensions.

Safety glazingthroughoutirrespective ofpane sizes.

2100500

Safety glazingthroughout.

Safety glazingnot required.

Safety glazing inpanes A B & C.

White areas do NOT require Safety Glass.

Patio Door & Sidelight Windows Casement Windows

2100500

A B C



Doors/Entrance Cottage PaneDoors/Entrance

Patio Doors & Toplight

Safety glazing up to2100 mm from FFL.Not required for toplight.

2100500

Safety glazingbetween broken linesas marked with ‘S’.

Safety glazingbetween broken linesas marked with ‘S’.

White areas do NOT require Safety Glass.

Windows to stairway, ramp or landing Balustrade to stairway,ramp,landing or balcony.

1800

S

S

S

S

SS

SS

S

1800

1800

1800

IMBUIA LIGHT OAK MAHOGANY TEAK

PRE-SEALED, PRE-GLAZED WINDOWS

PRODUCT NEEDS TO REMAIN IN PLASTIC DURING BUILDING IN PHASE. PLASTIC CAN BE REMOVED AFTER PLASTERING PROCESS.

50 51

BUILDERS’ SECTIONBUILDERS’ SECTION


ALL EXTERNALEDGES MUST BE

SEALED WITHSILICONE AFTER

INSTALLATION

* NO ANCHORS ARE TO BE

SCREWED INTO THE FRAMEWORK

* applicable to sliding sash windows.

SEAL ON ALL 6 SIDES WITH

MAXICARE® BEFORE

BUILDING IN

CHECKDIAGONAL

SQUARENESSOF FRAME

AND OPENER

A GAP OF ATLEAST 5mmMUST BE LEFTBETWEENLINTEL ANDWINDOW

CHECK THATTHE WINDOW

IS LEVEL & SQUARE

USE 3 BRICKS TO SET THE WINDOW LEVEL

– ADD ADDITIONAL BRICKS ONCE THESE

THESE HAVE SET

OPENERSMUST BE LEFT IN A CLOSEDPOSITION

OUTSIDE SILLS TO BE BUILT IN UNDERNEATH THE DRIP GROOVE

DPC TO BE FITTED INTO GROOVES AS INDICATED

STRAPS & SPACERS STAY IN POSITION UP TO THIS POINT

MINIMUM HEIGHT OF

BRICKWORK BEFORE

REMOVING DOOR

LEAVE 5mm GAP BETWEEN DOOR & LINTEL

PRE-HUNG DOORS

WINDOW INSTALLATION GUIDELINESINSTALLATION GUIDELINES

SUPPORT SILLEVENLY SPACED TO PREVENTSAGGING

ALL EXTERNALEDGES MUST

BE SEALED WITH SILICONE AFTER

INSTALLATION

DOORMUST BE

LEFT INA CLOSEDPOSITION

SEAL ON ALL6 SIDES WITHMAXiCARE®,

BEFOREBUILDING IN

CHECK THATTHE TOP & SILLARE IN A STRAIGHTLINE WITH THEBUILDERS LINE

MEASURE DIAGONALLY

FROM ONE INSIDE CORNER

TO ANOTHERTO CHECK IF

DOOR IS SQUARE(DO NOT USE A

SQUARE.)

A GAP OF AT LEAST 5mm

MUST BE LEFTBETWEEN

LINTEL ANDFRAME

CHECK THATTHE DOORIS LEVEL ANDSQUARE

FULL EXTERIOR SEMI - EXTERIOR* INTERIOR

105mm

105m

m

105mm

trim 38mm

trim

6m

m

trim 12mm

105mm

105m

m

105mm

trim 38mm

trim

6m

m

trim 12mm

105mm

105mm

trim 12mm

trim

6m

m

trim 12mm38mm

38mm

trim 3mm

trim

3m

m

trim 3mm38mm

38mm

trim 3mm

trim

3m

m

trim 3mm

TRIMMING SPECIFICATIONS

Maximum trimming based on door construction. *PLEASE NOTE: Trimming specifications differ due to different door construction.

FOLD-A-SIDE, SLIDING DOORS & FRAMES INSTALLATION GUIDLINES

Swartland’s new pre-ordered, pre-hung door comes perfectly fitted in its frame. This option makes for easy, accurate and hassle-free

installation, and will save you time and money. Simply install the unit, ensuring that it’s fixed and square. Once the unit is installed correctly,

the door can be removed and re-fitted later at your convenience.

PRE-HUNG DOORS COMPRISE OF: • Any door from our range with matching door frame.• Brass hardware (sinkless hinges, lock, striker plate).

• Spacers between door and frame to ensure optimum functionality.• Straps around door frame to keep it secure during installation.

• Lugs attached to door frame as per building regulations.• Single doors only (no double doors).

90O

KAYO

PAN

EL D

OO

RS

CAR

VED

DO

OR

S

PIN

E PA

NEL

DO

OR

SFR

AME

AND

LED

GE

DO

OR

S

HEA

VY D

UTY

DO

OR

SFI

RE

DO

OR

S

BER

GSU

N D

OO

RS

Before ordering, contact Swartland to help you choose your product.*TERMS AND CONDITIONS APPLY.

BEFORE BUILDING, ENSURE THAT:

• your order was manufactured according to your plans and specifications when you take delivery.

• possible discrepancies are reported to Swartland, in writing, within 7 (seven) days of delivery.

• all products must be stored off the ground in a dry, well-ventilated area and kept out of direct sunlight.

• all surfaces in direct contact with walls or concrete must be sealed by applying a coat of primer or sealant.

• all products are sealed on all sides with a sealant such as Maxicare®, to protect against moisture or cement stains.

• all products are level and square.

DURING BUILDING, ENSURE THAT:

• products are supported to prevent the sill and top rail bending and that the waterproofing membrane (DPC) is correctly fitted in the grooves provided.

• the loose end of the DPC is tucked in-between the two brick skins of the wall.

• all openings between walls and joinery must be sealed with silicone after installation.

• the products are set up level and square.

• windows are protected against building operations.

• the openers are left in a closed or locked position.

• the outside window sills are built in underneath the bottom of the window – and not against it.

AFTER BUILDING ENSURE THAT:

• all glazing beads are painted or sealed on all sides, as well as in the rebates.

• the end-grain of the glazing beads have been sealed.

• silicone is used to secure the glass to the window.

• all openings between walls and joinery are sealed with silicone after installation.

• all joinery surfaces are sealed with an exterior grade sealant, in accordance with the manufacturer’s specifications. For your Lifetime Guarantee* to be certified, all wood needs to be treated with Maxicare® in conjunction with the Easicare Maintenance Program.

MAINTENANCE RECOMMENDATIONS

Timber is a natural product. Whilst we try to ensure that our timber has been properly kiln-dried, it is still subject to movement. This is due to normal fluctuations in humidity and temperature. It’s thus very important to protect your wooden windows and doors against the elements by sealing them regularly.


BOX MOCK SASH WINDOWS MOCK SASH WINDOWS

Vertical section throughlouvre shutter

Vertical section throughsliding sash window

Section through upper sashthrough sliding sash window

Section through lower sash throughsliding sash window

Horizontal sectionthrough louvre shutter

SLIDING SASH WINDOWS

Vertical section Vertical section

SMALL PANE WINDOWSFULL PANE WINDOWS

HORIZONTAL GLIDING FULL PANETOP HUNG

Vertical sectionthrough casement

Vertical sectionthrough fanlight

Horizontal section through casement

15x1215x12

44 x 68 44 x 68

Horizontal section through fixed panel

Vertical section through fixed panel

Vertical section through casement

Horizontal section through casement

Horizontal section through fixed frame

40x89

40x89

40x

105

40x

98

40x

9040x

105

7x9

7x9

Vertical Section

Horizontal Section

Standard Window:Vertical sectionthrough fanlight

Standard Window:Horizontal section through fanlight

15x1215x12

44 x 68 44 x 68

Standard Window:Horizontal section through fixed pane

70x32 70x32LouvreBlade

70x32

70x32

90x32

45.00°

18mm

70x1570x15

54x40 54x40

68x15 68x1593x

19

93x

19

22x44

54x4054x40

22x4416x18

Horizontal section through lower sash Horizontal section through lower sash

Horizontal section through upper sash Horizontal section through upper sash

SECTIONS SECTIONS

7x9

7x9

RUBBERSEAL

RUBBERSEAL

18x22

54 x 44

54 x 44

44 x 68

44 x 68

12x15

12x15

7x9

7x9

18x2254 x 44

54 x 44

RUBBERSEAL

RUBBERSEAL

44 x 68

44 x 68

44 x 68

7x9 7x9

54 x 44 54 x 44

RUBBERSEAL

RUBBERSEAL

44 x 68 44 x 68

44x68

44x68

54x44

54x44

22x44

22x44

7x9

7x9

7x9

7x9

7x9

7x9

RUBBERSEAL

44x68

44x68

54x44

54x44

22x44

22x44

7x9

7x9

7x9

7x9

7x9

7x9

RUBBERSEAL

RUBBERSEAL

44x68 44x68

54x44

54x44 54x44

7x9RUBBER

SEALRUBBER

SEAL

44x68 44x68

54x44 54x44 54x447x9RUBBER

SEAL22x44

40x

89

40x

8940x105 40x105

40x105 40x105

13x105

7x9 7x9 RUBBER SEAL

7x9 7x9

54 x 44 54 x 44

RUBBERSEAL

RUBBERSEAL

44 x 68 44 x 68

12x15

12x15

7x9

7x9

18x2254 x 44

54 x 44

RUBBERSEAL

RUBBERSEAL

44 x 68

44 x 68

44 x 68

107x68

22x44

9x7

54x4054x40

54x4018x16

22x44

RUBBERSEAL

RUBBERSEAL

70x1570x15

68x15 68x15

49x4049x40

40x18

93x

19

93x

19

22x44

40x18

RUBBERSEAL

RUBBERSEAL

70x40

54x4054x40

54x44

18x16

22x44

16x18

22x44

9x7

16x18RUBBERSEAL

RUBBERSEAL

40x

2440x

24

49x4449x44

22x44

16x18

RUBBERSEAL

RUBBERSEAL

139x68

70x44

22x44

22x44

54x4454x44

54x44

Sash Rope

Sash Pulley

9x7

16x1218x16

27x10

139x68

RUBBERSEAL

RUBBERSEAL

RUBBERSEAL

22x44

90x19 90x19

72x19 72x19

115x

20115x

20

54x44 54x44

RUBBERSEAL

RUBBERSEAL

90x19 90x19

72x19 72x19

115x

20115x

2054x44 54x44

22x44RUBBER

SEALRUBBER

SEAL

107x40

92x40

92x40

92x

4092x

40

92x

4092x

40


SLIDING SASH STANDARD WINDOW RANGE

As viewed from outside. Figures in brackets indicate glass area.Window includes balancing weights: SS1, 1.5, 2, 2.5, 3, 8 – pre-balanced for 3mm clear glass. SS4, 5, 6, 7 – pre-balanced for 6mm clear glass.

Note: When ordering Louvre shutters, simply replace the CD/VIC/FG letters at the back of the window code with LS. For example: SS 1CD changes to SS 1LS.

These are manufactured with thicker wood sections (90x70), and are dipped and primed.All doorframes come with rubber seals inserted in the top and side rebates.

SPECIFICATIONS SPECIFICATIONS

DOOR SIZE

SK1 813mm X90x70

X90x70

X90x70

X90x70

X90x70

X90x70

X90x70

X90x70

X90x70

X90x70

X90x70

813mm

1210mm

1612mm

1200mm

1500mm

813 SK1R

813 SK1B

1210 SK2B

1612 SK3B

SK2 1210mm

SK2 1612mm

SK4 1200mm(Pivot Frame)

SK5 1500mm(Pivot Frame on request)

Frame with one side light. Only available for 813 doors

Frame with one side light. Only available for 813 doors

WIDTH OF DOOR FRAMES

Rebate

925mm

1322mm

1724mm

1336mm

1636mm

External

X SECTION

2115mm

2115mm

2115mm

2100mm

2100mm

NA

NA

NA

NA

NA

NA

No Sill With Sill Open In With Sill Open Out

EXTERNAL HEIGHT OF DOOR FRAMES

813mm

813mm

813mm

813mm

1210mm

1612mm

925mm

925mm

1322mm

1724mm

1362mm

1800mm

2132mm

2132mm

2132mm

2132mm

2499mm

2499mm

2499mm

2132mm

2132mm

2144mm

2144mm

2118mm

2118mm

2118mm

2144mm

2144mm

2118mm

2499mm

2499mm

2499mm

2118mm

2118mm

CAPE CULTURE DOORS FRAMES GUIDELINES

CUSTOM-MADE WINDOWS & DOORS GUIDELINES

DOORS

FOLD-A-SIDE DOORS

Max. 2600 highMax. 1000 wideGlass doors 1000 wideFloorboard doors 1000 wide

Doors higher than 2100,use 140mm stiles

Panel doors 1000 wide

SLIDING DOORS

PIVOT DOORS Pivot doors 1000/1500 wideMax. 2400 high

Max. 2700 highMax. 6000 wideMax. 900 per doorMax. 7 doors per unit

Max. 4200 wide for single panelMax. 2700 high

PRODUCT TYPE CAPE CULTURE (mm)PRODUCT TYPE CAPE CULTURE (mm)

SLIDING SASH WINDOWS*width may not exceed heightMax. 1400 wideMax. 2500 high

Max. 1400 wideMax. 2500 highCAPE MOCK SASH WINDOWS

Max. 600 wideCasement: Max. 1500 highCASEMENT WINDOWS

Max. 1200 wideMax. 900 highTOP HUNG WINDOWS

Max. 800 wide

Max. 800 wideMax. 2400 high

Louvre Blades: Max. 700 longLOUVRE SHUTTERS

1754

607

SS7VIC(0,52)

902

1606

SS2.5VIC(0,696)

1750

1105

SS4VIC(1,264)

1750

1253

SS5VIC(1,487)

2000

1253

SS6VIC(1,722)

1754

607

SS7CD(0,51)

902

1606

SS2.5CD(0,670)

1750

1105

SS4CD(1,231)

1750

1253

SS5CD(1,461)

2000

1253

SS6CD(1,663)

902

803

SS1.5FG(0,348)

1754

607

SS7FG(0,53)

902

1606

SS2.5FG(O,696)

1750

1105

SS4FG(1,487)

1750

1253

SS5FG(1,487)

2000

1253

SS6FG(1,722)

1202

803

SS1FG(0,512)

1300

902

SS2FG(0,673)

1550

SS3FG(1,099)

902

803

SS1.5VIC(0,348)

1202

803

SS1VIC(0,512)

1300

902

SS2VIC(0,673)

1550

SS3VIC(1,099)

1202

803

SS1CD(0,497)

1300

902

SS2CD(0,652)

1550

SS3CD(1,072)

902

803

SS1.5CD(0,335)

SS8FG

1202

607

SS8VIC

1202

607

SS8CD

1202

607

U-Values for Swartland wooden windowsSingle Clear glass: 5.6 Single Coated Glass: 5.5

(0.325)

(0.320)

(0,320)

SWARTLAND STANDARD DOOR REBATE

When ordering, doors are always to be viewed from the outside.

TOP VIEW

DOOR

RUBBER SEAL

DOOR

INSIDE

OUTSIDE

1105

1105

1105

56 57



As viewed from outside. Figures in brackets indicate glass area.

BOX MOCK SASH STANDARD WINDOW RANGE CAPE MOCK SASH STANDARD WINDOW RANGE

STMS7FG(0,550)

1712

520

870

STMS2.5FG(0,696)

1440

870

STMS1.5FG(0,348)

716

1155

STMS1FG(0,512)

716

1260

STMS2FG(0,673)

822

1505

STMS3FG(1,099)

1018

STMS4FG(1,264)

1712

1018

STMS5FG(1,487)

1712

1168

STMS6FG(1,722)

1960

1169

1712

520

STMS7VIC(0,540)

870

1440

STMS2.5VIC(0,696)

1712

520

STMS7CD(0,540)

870

1440

STMS2.5CD(0,670)

870

716

STMS1.5CD(0,335)

1155

716

STMS1CD(0,497)

1260

822

STMS2CD(0,652)

1505

1018

STMS3CD(1,072)

1712

1018

STMS4CD(1,231)

1712

1168

STMS5CD(1,461)

1960

1169

STMS6CD(1,663)

716

870

STMS1.5VIC(0,348)

716

1155

STMS1VIC(0,512)

822

1260

STMS2VIC(0,673)

1018

1505

STMS3VIC(1,099)

1712

1018

STMS4VIC(1.264)

1712

1168

STMS5VIC(1,487)

1960

1169

STMS6VIC(1,722)

SMS7FG(0,55)

1746

594

SMS1.5FG(0,348)

891

794

SMS7VIC(0,54)

1746

594

SMS1.5VIC(0,348)

891

794

SMS1VIC(0,512)

1196

794

SMS2VIC(0,673)

1296

898

SMS3VIC(1,099)

1546

1095

SMS1.5CD(0,335)

891

794

SMS1CD(0,497)

1196

794

SMS2CD(0,652)

1296

898

SMS3CD(1,072)

1546

1095

SMS2.5VIC(0,696)

891

1590

SMS4VIC(1,264)

1746

1095

SMS5VIC(1,487)

1746

1245

SMS6VIC(1,722)

1996

1245

SMS7CD(0,54)

1746

594

SMS2.5CD(0,670)

891

1590

SMS4CD(1,231)

1746

1095

SMS5CD(1,461)

1746

1245

SMS6CD(1,663)

1996

1245

SMS1FG(0,512)

1196

794

SMS2FG(0,673)

1296

898

SMS3FG(1,099)

1546

1095

SMS2.5FG(0,696)

1590

891

SMS4FG(1,264)

1095

1746

SMS5FG(1,487)

1245

1746

SMS6FG(1,722)

1245

1996

SMS8FG

SMS8VIC

SMS8CD



(0,320)

(0.320)

(0.325)

As viewed from outside. Figures in brackets indicate glass area.

594

1196

1196

59411

96

594

520

1155

STMS8FG(0.325)

1155

520

STMS8VIC(0.320)

1155

520

STMS8CD(0.320)

58 59



FULL PANE STANDARD WINDOW RANGE

As viewed from outside. Figures in brackets indicate glass area. Customer to stipulate whether the left or right hand side casements to open, where applicable.

All L/R codes shown above are left hand images.

SMALL PANE STANDARD WINDOW RANGE

As viewed from outside. Figures in brackets indicate glass area. Customer to stipulate whether the left or right hand side casements to open, where applicable.

All L/R codes shown above are left hand images.

1800

1500

1500

1200

1200

900

900

600

545

SA61SPL/R(0,603)

SA1FSP(0,507)

SA1SPL/R(0,514)

SC1FSP(0,268)

SC1SP L/R(0,400)

SD1SP(0,174)

1045

SA62SPL/R(1,243)

SA2FSPL(1,011)

SA2SPL/R(1,065)

SB2FSPL(0,788)

SC2FSPL(0,556)

SC2SP L/R(0,599)

SD2SP L/R(0,348)

1045

SA622SP(1,205)

SA2FSPR(1,011)

SA22SP(1,027)

SB2FSPR(0,788)

SB22SP(0,801)

SC2FSPR(0,556)

SC22SP(0,574)

SD22SP(0,348)

1545

SA63SP(1,845)

SA3FSP(1,535)

SA3SP (1,578)

SB3FSP(1,188)

SB3SP(1,232)

SC3FSP(0,842)

SC3SP(0,886)

SD3SP(0,521)

2045

SA64SP(2,485)

SA4FSP(2,042)

SA4SP(2,130)

SB4FSP(1,576)

SB4SP(1,663)

SC4FSP(1,110)

SC4SP(1,197)

SD4SP(0,695)

SA61L/R(0,678)

1800

1500

1500

1200

1200

900

900

545 1045 1045 1545 2045

SA1F(0,620)

SA1L/R(0,544)

SB1F(0,481)

SB1L/R(0,424)

SCIF(0,335)

SC1L/R(0,303)

SC2L/R(0,704)

SC22(0,606)

SC3(1,003)

SC4(1,423)

SC2FL(0,638)

SC2FR(0,638)

SC3F(0,941)

SC4F(1,315)

SB2L/R(0,969)

SB22(0,849)

SB3(1,393)

SB4(1,955)

SB2FL(0,906)

SB2FR(0,906)

SB3F(1,330)

SB4F(1,848)

SA2L/R(1,239)

SA22(1,088)

SA3(1,769)

SA4(2,494)

SA2FL(1,163)

SA2FR(1,163)

SA3F(1,707)

SA4F(2,381)

SA62L/R(1,501)

SA622(1,356)

SA63(2,180)

SA64(3,037)



SB1FSP(0.388)

SB1SPL/R(0.402)

SB2SPL/R(0.801)

60 61



HORIZONTAL GLIDING FULL PANE STANDARD WINDOW RANGE

ROUND TOP WINDOW RANGE

SRFG2

522

522

522

522

273

273

SRSP1 SRFG1 SRSP2

SRSP3

545

1045 1545 1545

545 1045

SRFG3

TOP HUNG STANDARD WINDOW RANGE

As viewed from outside. Figures in brackets indicate glass area. Customer to stipulate whether the openers are to be on the left or right hand side.

All L/R codes shown above are left hand images. All details shown can be altered at the manufactures discretion.

Round Top windows are available in small pane and full pane.

As viewed from outside. Figures in brackets indicate glass area. All L/R codes shown above are left hand images. Customer to stipulate if the left of right hand leaf is to open. Note: Only available as custom made.

SGW1215L/R(1,046)

SGW1515L/R(1,419)

SGW1815L/R(1,793)

SGW2115L/R(2,166)

SGW1212L/R(0,794)

SGW1512L/R(1,077)

SGW1812L/R(1,361)

SGW2112L/R(1,644)

SGW1290L/R(0,542)

SGW1590L/R(0,735)

SGW1890L/R(0,929)

SGW2190L/R (1,122)

1492

1192

892

1182 1482 1782 2082




2100

1500

1155

900

600

545 1045 1545 2045

SH1(0,800)

SH2L/R(1,584)

SH3L/R(2,775)

SH4(3,575)

SG1(0,522)

SG2L/R(1,211)

SG3L/R(1,928)

SG4(2,450)

SF1(0,366)

SF2L/R(0,889)

SF3L/R(1,434)

SF4(1,800)

SE1(0,317)

SE2L/R(0,718)

SE3L/R(1,136)

SE4(1,453)

SD1(0,183)

SD2L/R (0,440) SD3(0,623)

SD4(0,890)For two top openers

SD22 (0,366)

1500

900

900

900

SMA9(1,054)

SMC9(0.570)

900

1500

900

900

SMA9VB(1,054)

1710

1200

SMJ12(1,705)

900

1200

SMC12(0,808)

1710

1200

SMJ12VB(1,705)

900

1200

SMC12VB(0,808)

2100

1710

1155

1155

900

600

900 1755

SG1VV(1,135)

SG2VVL/R(2,505)

SF2VL/R(1,701)

SF1VV(1,689)

SF2VVL/R(1,599)

SE1V(0,578)

SE2VL/R(1,275)

SD1V(0,344)

SD2VL/R(0,791)

SH1VV(1,444)

SH2VVL/R(3,127)

SF1V(0.791)

SMC9VB(0.570)

THIS CATALOGUE IS PRINTED ON SAPPI CAMELOT CARTRIDGE MATT ART - FULLY RECYCLABLE

MAY 2011

When your company has been in the family

for three generations, you tend to think long term,

and wonder what you’ll be doing 60 years from now.

(Hopefully the same, but bigger and better.)

The world has changed since ‘Oupa’ Hanekom

started the company in the 1950’s, yet some

things have remained steadfast; values like hard

work and pride in one’s craft.

From the start the Hanekoms have been

obsessed with the idea of ‘continuous

improvement’, and this has driven the business

ever since – resulting in manufacturing that’s

world class and in a league of its own.

We care about the products we make.

It’s our commitment and pride, and after three

generations we’ve turned it into a fine art.

Swartland is our legacy, which is why we’ve

made sustainability such an important part of

our business. We’re planning to be around for

quite a while, and insist that the environment

is managed in a sustainable way.

www.swartland.co.za

Tel: 086 110 2425

HEAD OFFICE: Kotze Street, Moorreesburg Tel: 022 433 8000 Fax: 022 433 2760 Cape Town: Harry Alexander Crescent, Atlantis Tel: 021 573 7600 Fax: 021 577 3204 Johannesburg: Bridoon Street Stormill Ext 4, Roodepoort Tel: 011 671 0400 Fax: 011 672 0690 Durban: 17 Alexander Road, Westmead Tel: 031 792 0860 Fax: 031 700 3218 Port Elizabeth: Spectrum Ukhanyo, 6 Algoa Street, North End Tel: 041 487 1342 Fax: 041 487 1737

East London: Winmould Agencies, Unit 2 Wilsonia Industrial Park, Bert Kipling Road, Wilsonia Tel: 043 745 0410 Fax: 043 745 0237 George: Nywerheid Street, George Industria Tel: 044 874 5642 Fax: 044 878 2444

Swartland Cape Culture

Documents

Transcript of Swartland Cape Culture