© 2009 Bentley Systems, Incorporated Derricke Gray GEOPAK Product Manager Intersection Design with...
-
Upload
madeline-halliwill -
Category
Documents
-
view
218 -
download
3
Transcript of © 2009 Bentley Systems, Incorporated Derricke Gray GEOPAK Product Manager Intersection Design with...
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
Derricke GrayGEOPAK Product Manager
Intersection Design with Roadway Designer
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
2 | WWW.BENTLEY.COM
Intersection Design
Designing an intersection can be a complex and iterative process. There are an abundance of criteria to consider such as min/max slopes, stopping sight distance, drainage and R/W constraints – just to name a few.
There are many techniques in Roadway Designer that can be used to model intersections. This presentation will cover the basic workflow used to model an at-grade intersection.
2
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
3 | WWW.BENTLEY.COM
Project Review
3
CL-278
Reloc-2NW
NE
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
4 | WWW.BENTLEY.COM
Project Review
Before we begin, let’s review our project data and the template that we’ll be using.
4
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
5 | WWW.BENTLEY.COM
5
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
6 | WWW.BENTLEY.COM
Design Corridors
The first step in the process is to design the separate corridors for the mainline and the side road.
6
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
7 | WWW.BENTLEY.COM
7
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
8 | WWW.BENTLEY.COM
Intersection Design
Now that we have designed our corridors, we are ready to begin work on our intersection.
First, we need to produce our curb return geometry, both horizontally and vertically.
8
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
9 | WWW.BENTLEY.COM
Create Surfaces
There are several ways to calculate curb return elevations. • Vertical Offset from PGL• Pavement Slope from PGL• Elevation• Calculate from Surface Model
9
For this exercise, we’ll demonstrate how to calculate the beginning and ending elevations of the of the returns from a model. In order to do that, we’ll first need to create surfaces for both of our corridors.
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
10 | WWW.BENTLEY.COM
10
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
11 | WWW.BENTLEY.COM
Design Horizontal/Vertical Returns
Through the use of the Multi-Center Curve application, we can have GEOPAK design our preliminary Horizontal and Vertical curb return geometry.
11
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
12 | WWW.BENTLEY.COM
Design Horizontal/Vertical Returns
The Multi-Center Curve application can create one-center, two-center or three-center compound curves at the intersection of two alignments. The applications creates a new horizontal alignment in the geometry database and, if desired, a vertical alignment as well.
12
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
13 | WWW.BENTLEY.COM
13
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
14 | WWW.BENTLEY.COM
Integrate Returns into Side Road
Now that we have the horizontal and vertical geometry for our curb returns, we can integrate this geometry into the design of the intersection.
14
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
15 | WWW.BENTLEY.COM
Integrate Returns into Side Road
• Assign curb return alignments as Point Controls
• Increase the template drop interval through return
• Generate new surface for Reloc-2 and review
15
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
16 | WWW.BENTLEY.COM
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
17 | WWW.BENTLEY.COM
Integrate Returns into Mainline
We also need to integrate the curb returns into our mainline surface with the same workflow as we used for the side road.
17
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
18 | WWW.BENTLEY.COM
Integrate Returns into Mainline
• Assign curb return alignments as Point Controls
• Increase the template drop interval through return
• Drop the end conditions and shoulder
• Generate new surface for CL-278 and review
18
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
19 | WWW.BENTLEY.COM
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
20 | WWW.BENTLEY.COM
Finished Model
With our intersection designed, we can now create our finished model, which will integrate both corridors into a single model.
20
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
21 | WWW.BENTLEY.COM
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
22 | WWW.BENTLEY.COM
Components
In the V8i SU1, we can take advantage of the new functionality of plotting ‘components’ when we create our model. These components allow us to visualize our model to much better detail.
22
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
23 | WWW.BENTLEY.COM
© 2
00
9 B
en
tley S
yst
em
s, In
corp
ora
ted
Derricke GrayGEOPAK Product Manager
Intersection Design with Roadway Designer