New Design Tools GEOPAK Site V8.5 Michael Gilham Bentley Civil Michael Gilham Bentley Civil.
-
Upload
kaya-yeates -
Category
Documents
-
view
215 -
download
2
Transcript of New Design Tools GEOPAK Site V8.5 Michael Gilham Bentley Civil Michael Gilham Bentley Civil.
New Design ToolsGEOPAK Site V8.5New Design ToolsGEOPAK Site V8.5
Michael GilhamBentley Civil
Michael GilhamBentley Civil
What’s New in GEOPAK Site?
New Tools:> Pad Design.> Pond Design.> Channel Design.
What’s New in GEOPAK Site?
Modified Tools:Composite Section.
New Graphical Section Manager.New Dynamic Graphical Section viewer.Support for Super Elevation Shapes.Support for Variable Slopes from Site Elements.Support for “Draped” elements.Support for “Surface Edge” projection.And more......
What’s New in GEOPAK Site?
Modified Tools continued...Element>New/Edit Tools.
Support for Super Elevation Shapes from an Alignment Element.
Ability to apply variable slope projection from any Site Element.
Support for “End Point” drape.
Element>Modify.Partial Delete.
What’s New in GEOPAK Site?
Modified Tools continued... Analysis>Height tool.
Now has 2 modes!Normal, Elevation mode And....New, Slope Mode.
Let’s take a look....
Tools>Pad Design.Guides the User through the Pad Design
process.Designed to allow for simple designs to be
quickly accomplished from a single tool.Designed to cover “most of the time”
scenario’s.
Let’s take a look....
Tools>Pad Design.Go to the Demo.....
Let’s take a look....
Tools>Pond Design.Guides the User through the Pond Design
process.Designed to allow for simple designs to be
quickly accomplished from a single tool.Designed to cover “most of the time”
scenario’s.
Let’s take a look....
Tools>Pond Design.Go to the Demo....
Let’s take a look....
Tools>Channel Design.Guides the User through the Channel
Design process.Designed to allow for simple designs to be
quickly accomplished from a single tool.Association to elements allows for very
easy modifications.Designed to cover “most of the time”
scenario’s.
Let’s take a look....
Tools>Channel Design.Go to the Demo....
Let’s take a look....
Tools>Composite Section>Section Manager:Provides the User with the ability to store and access many SEC files.Provides graphical view of SEC files.
Let’s take a look....
Tools>Composite Section>Graphical Section viewer:
Shows left/right side or...
Let’s take a look....
Tools>Composite Section>Graphical Section viewer:
Both Sides.
Let’s take a look....
Tools>Composite Section.Support for Super Elevation Shapes.
Let’s take a look....
Tools>Composite Section. Support for Variable Slope Tables.
Click “Define”
Let’s take a look....
Tools>Composite Section. Support for Variable Slope Tables.
Let’s take a look....
Tools>Composite Section. Support for “Draped” elements.
Let’s take a look....
Tools>Composite Section. There’s more .. But lets go to the Demo....
What’s New in GEOPAK Site?
Modified ToolsElement>New/Edit Tools.
Support for Super Elevation Shapes from an Alignment Element.
Ability to apply variable slope projection from any Site Element.
Support for “End Point” drape.
These are the same (or similar) to what's in Comp Section.
What’s New in GEOPAK Site?
Modified Tools continued...Element>Modify.
Partial Delete.
What’s New in GEOPAK Site?
And... The “about time” tool for this release....Analysis>Height tool.
Now has 2 modes!Normal, Elevation mode And....New, Slope Mode.
What’s New in GEOPAK Site?
Analysis>Height tool.
What’s New in GEOPAK Site?
Analysis>Height tool.
What’s New in GEOPAK Site?
Questions??
Thanks for coming and ....“that’s all folks”.....!