Technical SpecificationsSENNEBOGEN Track Material Handler

EngineModel Cummins QSL9, Tier 4 FinalNet Power 305 HP (224 kW)

Operating WeightR-HD / track 120,151 lb (54,500 kg)

Leading Through InnovationReachstandard 51‘6“ (16 m) (stick pin)optional up to 58‘6“ (18 m) (stick pin)

Magnet Systemrating 25 kW

2

Technical Specifications 835 R-HD “E“

Subject to technical modification.

SWING SYSTEMswing speed 0 - 8 rpmswing hydraulic open loopdrive 2 x axial piston motor driving planetary gearbox, integrated brake valvesswing brake multidisc brake, spring loadedswing bearing external teeth, sealed ball bearing

TRAVEL / UNDER CARRIAGEtype crawler T41/380system mechanical adjustable wide gaugedrive independent driven by an axial piston motor through a compact planetarytravel speed 1st 0-1.0 mph (0-1.6 km/h) 2nd 0-1.84 mph (0-3.0 km/h)shoes 27.6”(700 mm) (triple grouser)crawler B6 maintenance freesteering foot pedals / leverssafety travel alarm

REFILL CAPACITIESfuel tank 165 gal (625 L)engine cooling system 15.85 gal (60.0 L)engine oil w / filter 7.53 gal (28.5 L)hydraulic tank 135 gal (510 L)hydraulic system 180 gal (680 L)swing gear (each) 1.06 gal (4.0 L)final drive (each) 2.38 gal (9.0 L)swing ring lubrication reservoir 0.26 gal (1.0 L)central lubrication reservoir 5.5 lb (2.5 kg)diesel exhaust fluid 7.93 gal (30 L)

MAGNET SYSTEMrating 25 kWvoltage (magnetized) 230 Vcurrent (cold condition) 109 Ampscontroller Hubbellgenerator Baldordrive hydraulic

WEIGHToperating weight 120,151 lb (54,500 kg)

ENGINEmodel Cummins QSL9-C300type in-line, 6 cylinder, cooled exhaust gas recirculation, water cooledemission EPA Tier 4 Final net power 305 HP (224 kW) @ 2,000 rqminjection high pressure common-raildisplacement 8.9 L (543.1 cu.in.)bore 4.49 in (114 mm)stroke 5.69 in (145 mm)aspiration turbo charged, charge air cooledfuel tank 165 gal (625L)air filtration direct flow filtration system dual stage filter with pre-filtercontrol integrated ECM automatic idle - stop eco mode

ELECTRICALalternator 100 V/Ahstarter 24 Vm 7.8 kWbattery 2 x 12 V, 150 Ahlights 2 x cab roof, type halogen 2 x frame upper carriage, type H4

HYDRAULIC SYSTEMsystem type LUDV load sensing pilot pressure controlled open centerpump type variable-displacement axial-piston pumpmax. pump flow 196 gpm (740 l / m)max. pressure 5,076 psi (350 bar)hydraulic tank 135 gal (500 L)hydraulic system 180 gal (680 L)filtration dual filtration system 3 micron (HydroClean)

COOLINGcooling type cool-on-demand, suction-type fan system, side by sidehydraulic / water hydraulic fan drive axial piston pump, reversible fan thermo- statically controlled, closed loop system charge air direct fan drive

3Subject to technical modification.

Standard / Optional Equipment 835 R-HD “E“ENGINEWater separator in fuel line Automatic idle / engine stop control Eco mode Visual fuel tank check Engine block & water separator pre-heater

ELECTRICBattery disconnect switch Centralized fuse box Battery jump start connection from ground level

HYDRAULICPilot pressure controlled variable displacement pump Thermostatically controlled cooling system Centralized hydraulic test ports Protection covers for pilot pressure control valves 3 micron dual filtration system Load sensing, flow on demand hydraulic system Optimized hydraulic pump regulation (GLR) Visual hydraulic tank check from ground level Attachments open, close & rotation hydraulics Hydraulic tank shut off valve Electrical hydraulic tank pre-heater Biodegradable hydraulic oil Hydraulic circuit for scrap shear Hydraulic circuit for hammer, breaker Additional hydraulic circuits Attachment return filtration filters (60 µm)

UPPER CARRIAGERearview & right side view camera system Automatic lubrication system Anti-slip mats on walking area Lockable side doors Handrails on top of upper carriage Mirror left side Removable panels Additional light package Custom colors Seawater paint coating

OPERATORS CAB (maXCab)Hydraulic elevating cab system E260 Multi adjustable, air suspended operators seat 3” (76 mm) seat belt Seat heater Automatic climate control (heater / AC) Air outlets w / defroster Storage area for lunch box Large cup holder Fire extinguisher Tinted windows with safety glass Door window as sliding window AM / FM Radio with CD player & speakers Removable floor mat SenCon diagnostic system Multicolor Monitor Tilt out front window Halogen light package on cab roof Mechanical hour meter Sliding door Catwalk w / handrail 12 V / 24 V power outlet Windshield wiper and washers Emergency exit hammer Safety lever Sun shades

OPERATORS CAB (maXCab) Interior lighting Rain cover front window Outside mirror Optical and acoustic warning system Positive filtered ventilation (pressurized cab) Safety check valves for elevating cab cylinder Foot rest maXCab industry Windshield protection guard Skylight protection guard Skylight FOPS guard Bullet proof windshield Bullet proof skylight Polycarbonate side windows Additional light package Fixed cab elevation Hydraulic elevating up and out cab E300/260 Operators cab with floor window Additional cameras

UNDERCARRIAGEHeavy duty designed material handling under carriage Crawler under carriage with mechanical adjustable tracks Heavy duty crawler track frame 27.6“ (700 mm) triple grouser track shoes, canted Maintenance free crawlers B6 Hydraulic chain tension device Travel alarm 31.5“ (800 mm) triple grouser track shoes, canted 27.6“ (700 mm) forged flat track shoes, canted Crawler under carriage with hydraulic adjustable tracks

WORKING EQUIPMENTPurpose built material handling boom Purpose built material handling stick Attachment hydraulic line connections with ball valves Boom position 1 Safety check valves for stick cylinders Safety check valves for boom cylinders Cylinder end position dumping Boom hoist limitation Bronze bushings connected to automatic lubrication system Stick limitation Halogen light package boom Purpose built material handling stick with reversing linkage Purpose built material handling boom for scrap shears Boom position 2

MAGNET SYSTEMHydraulic driven generator Magnet controller Magnet suspension link

ATTACHMENTSOrange peel grapple Mag grapple Clamshell Magnet Log grapple Scrap shear Power attachment Pipe handler Live heel

SWING SYSTEM360° protection cover, removable Manual operated swing gear pinion lubrication system

Standard Equipment Optional Equipment

4

Meters Feet

0

5

10

15

20

25

30

-10

-5

-15

-20

35

40

45

50

55

Meters

Feet

[19.7]43,431

[21.4]47,178

[5.7]12,566

[4.6]10,141

[4.9]10,803

[8.8]19,400

[12.3]27,117

[13.4]29,542

[14.6]32,187

[15.5]34,171

[15.9]35,053

[10.8]23,810

[9.0]19,841

[8.8]19,400

[7.4]16,314

[8.8]19,400

[9.6]21,164

[10.0]22,046

[10.1]22,266

[10.5]23,148

[11.0]24,251

[11.6]25,573

[12.1]26,676

[12.3]27,117

[12.0]26,455

[11.2]24,692

[9.8]21,605

[7.5]16,535

[8.7]19,180

[8.8]19,400

[8.9]19,621

[9.1]20,062

[9.4]20,723

[9.7]21,385

[9.9]21,826

[10.0]22,046

[9.8]21,605

[9.2]20,282

[8.2]18,078

[6.8]14,991

[5.4]11,905

[7.3]16,094

[7.8]17,196

[7.9]17,416

[8.0]17,637

[8.1]17,875

[8.3]18,298

[8.4]18,519

[8.3]18,298

[8.1]17,857

[7.6]16,755

[6.8]14,991

[5.6]12,346

[5.0]11,023

[6.9]15,212

[7.0]15,432

[7.1]15,653

[7.1]15,653

[7.2]15,873

[7.2]15,873

[7.1]15,653

[6.8]14,991

[6.4]14,109

[5.6]12,346

[5.9]13,007

[6.3]13,889

[6.3]13,889

[6.3]13,889

[6.2]13,669

[6.0]13,228

[5.7]12,566

[5.2]11,464

[4.5]9,921

[5.2]11,464

[5.4]11,905

[5.3]11,684

[5.0]11,023

[4.6]10,141

[4.0]8,818

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

50 10 15 20 25 30 35 40 45 50 55 60

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO 10567 and do not exceed 75% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 360° with standard grousers and fully extended tracks. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator’s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

K16-1

830 M “E”

Working Equipment K16-1

reach 51'6" (15.69 m)boom 29'10" (9.1 m)stick 22'8" (6.9 m)boom pos. 1

Operator’s Cab

model E270 maXCab hydraulic elevating up 8'8" (2.65 m) elevation eye level approx. 19' (5.8 m)

Undercarriage

model T41/380tracks B6 triple grouser shoes 27.6" (700 mm)

machine shown in mirror image

Lift Capacities835 R-HD “E”

5

[19.1]42,108

[14.3]31,526

[4.2]9,259

[3.4]7,496

[3.7]8,157

[6.9]15,212

[13.0]28,660

[14.0]30,864

[14.8]32,628

[13.9]30,644

[7.7]16,975

[6.5]14,330

[6.4]14,109

[7.1]15,653

[9.7]21,385

[10.1]22,266

[10.6]23,369

[11.1]24,471

[11.5]25,353

[11.6]25,573

[11.4]25,132

[10.6]23,369

[9.5]20,944

[7.9]17,416

[5.8]12,787

[7.1]15,653

[7.9]17,416

[8.2]18,078

[8.2]18,078

[8.4]18,519

[8.6]18,960

[8.9]19,621

[9.2]20,282

[9.4]20,723

[9.4]20,723

[9.2]20,282

[8.8]19,400

[8.0]17,637

[6.8]14,991

[5.9]13,007

[7.1]15,653

[7.3]16,094

[7.3]16,094

[7.4]16,314

[7.5]16,535

[7.7]16,975

[7.8]17,196

[7.9]17,416

[7.9]17,416

[7.7]16,975

[7.3]16,094

[6.7]14,771

[5.8]12,787

[5.8]12,787

[6.5]14,330

[6.5]14,330

[6.5]14,330

[6.6]14,550

[6.7]14,771

[6.8]14,991

[6.8]14,991

[6.7]14,771

[6.5]14,330

[6.2]13,669

[5.7]12,566

[4.9]10,803

[5.4]11,905

[5.9]13,007

[5.9]13,007

[5.9]13,007

[5.9]13,007

[5.9]13,007

[5.9]13,007

[5.8]12,787

[5.6]12,346

[5.2]11,464

[4.7]10,362

[4.0]8,818

[4.6]10,141

[5.3]11,687

[5.3]11,687

[5.2]11,464

[5.2]11,464

[5.1]11,243

[5.0]11,023

[4.8]10,582

[4.4]9,700

[3.9]8,589

[4.3]9,480

[4.6]10,141

[4.5]9,921

[4.4]9,700

[4.2]9,259

[3.9]8,598

[3.5]7,716

Meters Feet

0

5

10

15

20

25

30

-10

-5

-15

-20

35

40

45

50

55

60

Meters

Feet

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

50 10 15 20 25 30 35 40 45 50 55 60

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO 10567 and do not exceed 75% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 360° with standard grousers and fully extended tracks. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator’s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

830 M “E”

K18-1

Working Equipment K18-1

reach 57'8" (17.58 m)boom 33'2" (10.1 m)stick 25'11" (7.9 m)boom pos. 1

Operator’s Cab

model E270 maXCab hydraulic elevating up 8'8" (2.65 m) elevation eye level approx. 19' (5.8 m)

Undercarriage

model T41/380tracks B6 triple grouser shoes 27.6" (700 mm)

machine shown in mirror image

Lift Capacities835 R-HD “E”

6

[6.5]14,330

[3.4]7,496

[3.2]7,055

[3.6]7,937

[4.1]9,039

[11.4]25,132

[12.4]27,337

[13.2]29,101

[8.8]19,400

[6.3]13,889

[5.7]12,566

[5.7]12,566

[5.9]13,007

[8.6]18,960

[9.2]20,282

[9.7]21,385

[10.2]22,487

[10.5]23,148

[10.4]22,928

[9.9]21,826

[8.8]19,400

[8.5]18,739

[7.3]16,094

[5.4]11,905

[6.6]14,550

[6.9]15,212

[7.1]15,635

[7.4]16,314

[7.7]16,975

[8.0]17,637

[8.3]18,298

[8.5]18,739

[8.5]18,739

[8.3]18,298

[7.9]17,416

[7.2]15,873

[6.3]13,889

[5.5]12,125

[6.1]13,448

[6.1]13,448

[6.2]13,669

[6.3]13,889

[6.4]14,109

[6.6]14,550

[6.8]14,991

[7.0]15,432

[7.1]15,653

[7.1]15,653

[6.9]15,212

[6.6]14,550

[6.1]13,448

[5.4]11,905

[4.0]8,818

[5.5]12,125

[5.5]12,125

[5.5]12,125

[5.6]12,346

[5.7]12,566

[5.8]12,787

[5.9]13,007

[6.0]13,228

[6.1]13,448

[6.1]13,448

[5.9]13,007

[5.7]12,566

[5.2]11,464

[4.6]10,141

[3.8]8,377

[5.0]11,023

[5.0]11,023

[5.1]11,243

[5.1]11,243

[5.2]11,464

[5.2]11,464

[5.3]11,684

[5.3]11,684

[5.2]11,464

[5.1]11,243

[4.9]10,803

[4.5]9,921

[3.9]8,598

[4.6]10,141

[4.6]10,141

[4.6]10,141

[4.7]10,362

[4.7]10,362

[4.7]10,362

[4.7]10,362

[4.6]10,141

[4.4]9,700

[4.2]9,259

[3.8]8,377

[3.2]7,055

[4.2]9,259

[4.2]9,259

[4.2]9,259

[4.2]9,259

[4.1]9,039

[4.0]8,818

[3.8]8,377

[3.5]7,716

Meters Feet

0

5

10

15

20

25

30

-10

-5

-15

-20

-25

35

40

45

50

55

60

Meters

Feet

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

50 10 15 20 25 30 35 40 45 50 55 60

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO 10567 and do not exceed 75% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 360° with standard grousers and fully extended tracks. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator’s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

B18-1

Working Equipment B18-1

reach 58'6" (17.83 m)boom 35'5" (10.8 m)stick 25'11" (7.9 m)boom pos. 1

Operator’s Cab

model E300/260 maXCab hydraulic elevating up & out (optional item) eye level approx. 20'4" (6.2 m)

Undercarriage

model T41/380tracks B6 triple grouser shoes 27.6" (700 mm)

machine shown in mirror image

Lift Capacities835 R-HD “E”

7

[8.4]18,519

[13.3]29,321

[19.2]42,328

[10.6]23,369

[3.5]7,716

[3.1]6,834

[3.8]8,377

[8.6]18,960

[12.0]26,455

[12.8]28,219

[13.8]30,423

[14.6]32,187

[14.6]32,187

[8.7]19,180

[7.6]16,755

[7.8]17,196

[7.0]15,432

[8.5]18,739

[9.4]20,723

[9.3]20,503

[9.5]20,944

[9.8]21,605

[10.3]22,707

[10.8]23,810

[11.1]24,471

[11.2]24,692

[10.7]23,589

[9.8]21,605

[8.3]18,298

[7.1]15,653

[8.1]17,875

[8.0]17,637

[8.1]17,875

[8.3]18,298

[8.5]18,739

[8.8]19,400

[8.9]19,621

[8.9]19,621

[8.6]18,960

[7.9]17,416

[6.8]14,991

[6.9]15,212

[7.0]15,432

[7.0]15,432

[7.1]15,653

[7.2]15,873

[7.3]16,094

[7.4]16,314

[7.3]16,094

[7.0]15,432

[6.4]14,109

[5.6]12,346

[6.2]13,669

[6.2]13,669

[6.2]13,669

[6.2]13,669

[6.2]13,669

[6.2]13,669

[6.0]13,228

[5.7]12,566

[5.2]11,464

[4.4]9,700

[5.2]11,464

[5.4]11,905

[5.4]11,905

[5.3]11,684

[5.2]11,464

[5.0]11,023

[4.6]10,141

[4.1]9,039

[3.2]7,055

[4.3]9,480

[4.4]9,700

[4.2]9,259

[3.9]8,598

[3.5]7,716

Meters Feet

0

5

10

15

20

25

30

-10

-5

-15

-20

35

40

45

50

55

Meters

Feet

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

50 10 15 20 25 30 35 40 45 50 55 60

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO 10567 and do not exceed 75% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 360° with standard grousers and fully extended tracks. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator’s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

K16-1ULM

Working Equipment K16-1 ULM

reach 50'11" (15.54 m)boom 29'10" (9.1 m)stick 21'8" (6.6 m) ULMboom pos. 1

Operator’s Cab

model E270 maXCab hydraulic elevating upeye level approx. 19' (5.8 m)

Undercarriage

model T41/380tracks B6 triple grouser shoes 27.6" (700 mm)

machine shown in mirror image

Lift Capacities835 R-HD “E”

SENNEBOGEN LLC 1957 Sennebogen TrailStanley, NC 28078, USA

Phone +1 (704) 347-4910Fax +1 (704) 347-8894Email sales@sennebogenllc.com

835R

-HD/

E-03

15

“Under our policy of continuous improvements we reserve the right to change specifications, materials and design without prior notice. The illustrations shown may include optional equipment. See your SENNEBOGEN dealer for further information.” © 2015 SENNEBOGEN LLC, all rights reserved, printed in USA

GO FOR GREEN www.sennebogen-na.com

9'8" (3,000)2'2"(675)

12'1" (3,675)10'8" (3,295)

1'2" (350)3'4"

(1,0

50)

14'8" (4,500)

2'3"(700)

7'6" (2,300)9'8" (3,000)12'5" (3,800)

8'7"

(2,6

50)

3'10

"(1

,205

)

14'4" (4,400)17'5" (5,350)

10'4

" (3,

160)

19' (

5,81

0)

transport dimensions valid for boom position 1 only • boom bosition 2 may increase transport height & transport length • handrails, catwalks & other accessories are disassembled for transportation • *optional cab E300/260 will increase machine transport height by 2" (50 mm) • **only valid with 8" (200 mm) rise of machine and/or clearance for boom/stick lowering

Reach Boom Length Stick Length Transport Length Transport Height H1* Transport Height H1/2** Transport Width

K16-1 29'10" (9,100 mm) 22'8" (6,900 mm) 44'4" (13,400 mm) 11'4" (3,450 mm) 11'6" (3,500 mm) 9'10" (3,000 mm)

K18-1 33'2" (10,100 mm) 25'11" (7,900 mm) 47'7" (14,400 mm) 11'4" (3,450 mm) 11'6" (3,500 mm) 9'10" (3,000 mm)

B18-1 35'5" (10,800 mm) 25'11" (7,900 mm) 49'6" (15,100 mm) 11'4" (3,450 mm) 11'6" (3,500 mm) 9'10" (3,000 mm)

K16-1 ULM 29'10" (9,100 mm) 21'8" (6,600 mm) 44'4" (13,400 mm) 11'4" (3,450 mm) 11'6" (3,500 mm) 9'10" (3,000 mm)

Transport dimensions