6180 HMC

4400Star-Lifter

green line Material Handling Machine165,400 lbs.

426 HPC Series

Leading Through Innovation

6180 HMC

4400Star-Lifter

2

• 6 cylinder, water cooled, turbo Caterpillar C11 Acert diesel engine, with direct injection

• Output as per DIN/ISO: 426 HP at 1900 rpm

• Radiator fan is hydraulically driven and is reversible to clean out debris from radiator

• Equipped with engine intercooler• Dry air filter with cyclone prefilter, safety

element and pollution indicator

• Fuel tank capacity: 250 gallons• Electrical system:

24 volt, 2 x 12 volt high performance batteries

• Computer free load-sensing hydraulic system with energy saving flow on demand control and pressure cut off function

• All working functions can be operated simultaneously and be individually controlled very precisely due to the independent and proportional split of the oil feed from the variable displacement pumps

• Hydraulic system designed for low pressure losses and heat generation by large diameter piping and hoses as well as large control valves

• Pilot operated joy sticks control all working and auxiliary functions

• Flow rate 1 x 250 gpm• Working pressure 5075 psi• Hydraulic tank capacity 254 gallons

• Special ultra fine filtration system (99.95% efficiency at 2 micron) designed to protect the hydraulic system, extending the life of all components and reducing the down time of the machine as well as the maintenance and repair costs

• Full flow return oil filters with extended change intervals

• Oversized hydraulic oil cooler, mounted completely separated from the water radiator, maintaining the oil temperature at an ideal level. The fan is hydraulically driven and thermostatically controlled

• Centralized pressure test ports, easily accessible from ground level, mounted and well protected on the left side of the machine, enable fast trouble shooting of all machine functions without any electronic support

• 33 kW Baldor generator, belt driven for easy operation and maintenance, combined with a Hubbell controller

• 2.5 - 5.0 cu. yds. scrap grapple with rotation, 4 or 5 tine, open, semi-closed or closed, depending on the weight of the grapple and operating reach

• 2.0 - 7.0 cu. yds. clamshell grapple with rotation, depending on the material density, weight of the grapple and operating reach

• Log grapple available in different sizes and configurations depending on material being handled

• Contact Sennebogen for approval of the attachment before operating the machine

• Always refer to the lifting capacities on the chart before installing any attachment

• Basic 870 with 4 point outriggers, material handling boom 34'5", stick 26'3" and scrap grapple 4 cu. yds.

Approximate weight 165,400 lbs.Given weights may vary with different equipment

• Comfortable maXCab operator’s cab resiliently mounted

• Sound absorbing insulation• Roomy compartment with excellent

all-round visibility• All weather design with tinted safety glass• Door window as sliding window• Windshield can be pushed up under cab roof• Large skylight• Windshield wiper/washer on both windshield

and skylight• Sun visor• Large capacity storage bin• Ergonomically designed, air suspension and

heated seat with adjustable armrests and lumbar support

• Well laid out instrument panel with ergonomically shaped joy sticks

• Infinitely variable cab heating system, outside air and circulating air stages with particle filter

• Five adjustable air vents for optimum work environment

• New Sennebogen Diagnostic System (SDS) for monitoring all essential machine and engine functions with visual and audible warning system

• 12 and 24 volt power supply• Air conditioning• AM/FM radio with CD player

• Axial piston motors, spring-loaded hydraulically releasable multiple disk brake, planetary gears and pinion shaft

• Large dimensioned swing bearing• Swing speed: 0 - 6,2 rpm, infinitely controllable• Hydraulic motors with integrated hydraulic

brake valves keep wear and tear of braking system to a minimum

• Undercarriage welded as rigid, torsion-free box-type design

• 4-point outriggers with individual control• Lockable storage compartment• Tires: 8 x 16.00-25 solid rubber tires with

intermediate protector ring

• All wheel drive via 2 variable hydraulic motors with directly mounted automatic brake valve

• 2-circuit servo brake system with additional safety brake as parking brake

• Special design, heavy duty, extra wide, 70 t axles• Steering axle as hydraulically controllable

oscillating axle• Oscillating axle cylinders with safety

check valves• Travel speed: 6.8 mph

• Torsion-free upper frame with continuous bearing-plates for optimal power introduction, precision machined

• Steel bushings for the boom pivot• Low noise emission

• Box-type design with large dimensioned sealed bearings for long working life

• Grapple open-close and rotate circuits installed on the machine

• Working cylinders with hydraulic end position damping.

• Optimized design for high lifting capacities• Equipped standard with safety check valves

(load holding valves) for boom and stick cylinders

• The 870 M C Series material handling equipment has been specially designed for the increased demands of high-performance operation, increased productivity and output

Specifications

Engine

Hydraulic System

Undercarriage

Uppercarriage Operator’s Cab

Operating Weight

■ Working radius up to 68'11"■ No computers required to control hydraulic system■ Ultra fine hydraulic oil filtration system reduces

maintenance cost and down time of machine

■ Central lubrication system standard■ State-of-the-art load-sensing hydraulic system■ Powerful maintenance-friendly design■ Low noise emission

Swing System

Working Equipment

Magnet System

Grapple

Certification according to regulations

Subject to technical modification

6180 HMC

4400Star-Lifter

3

61,500

70,980

37,910

23,580

20,940

21,380

22,920

23,140

44,750

49,820

55,330

59,740

58,640

40,780

35,710

34,830

24,250

34,170

36,370

39,240

42,540

45,850

48,720

50,480

51,360

50,700

48,500

44,970

18,510

24,470

27,990

30,200

30,640

31,520

33,060

35,050

37,250

39,460

41,220

42,540

43,210

42,760

41,220

38,360

18,950

24,030

27,550

28,880

29,540

30,640

31,740

33,280

34,830

35,930

36,590

36,150

35,710

35,270

32,840

18,070

22,920

26,670

27,770

28,430

29,320

30,200

31,080

31,520

31,080

30,640

30,420

30,200

28,210

15,650

20,720

24,690

26,670

27,110

27,770

27,550

27,110

26,890

26,670

26,450

26,230

16,530

20,500

23,800

24,250

24,030

23,800

23,580

23,360

23,360

]

22,040

17,190

17,850

17,630

870.M.KA10.5ST8.0 MP70 abgestütztTabelle Nr.: Prospekt 2002 ...I.14112002130411

Bearbeiter: kalue]atum : 14.11.2002

870

807570656055504540353025201510Feet

Meters

50 85 90

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

0

5

10

15

20

25

30

35

40

45

50

55

-25

-20

-15

-10

-5

- 9

- 8

- 7

- 6

- 5

- 4

- 3

- 2

- 1

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

-30

60

65

Meters Feet

machine shown in mirror image14112002130411

Boom Position IK18

870 M■ Undercarriage: MP70, 4-point outriggers

tires 8 x 16.00-25■ Boom: 34'5"■ Stick: 26'3"■ Boom position: I■ Cab: D 270 maXCab hydraulic elevating

cab with operator’s eye level 20'2"

Load chartNotes:Lift capacities are stated in pounds. Indicated loads are based on ISO 10567 and do not exceed 75% of tipping and 87% of hydraulic capacity. Machine on firm, level support ing surface. Loads valid for 360° on outriggers supported.Lifting capacities do not include working attachments such as scrap grapples, magnets, etc. Their weights must be deducted from the numbers indicated in the lifting charts.

6180 HMC

4400Star-Lifter

4

59,300

68,120

29,980

19,180

16,970

17,190

18,290

42,760

47,830

52,910

57,090

42,980

30,860

27,330

26,670

26,890

34,390

37,250

40,340

43,430

46,290

48,060

48,940

48,500

43,430

41,440

18,730

22,480

24,910

27,550

28,430

29,540

31,080

33,060

35,050

37,250

39,020

40,340

41,000

41,000

39,900

37,910

34,830

18,950

22,260

24,910

26,010

26,450

27,330

28,430

29,760

31,300

32,620

33,950

34,830

35,050

34,390

34,170

32,840

30,200

18,510

21,820

24,690

24,910

25,570

26,230

27,330

28,210

29,320

29,980

30,200

29,760

29,320

29,100

28,430

26,230

17,630

20,940

23,580

24,030

24,470

25,130

25,790

26,450

26,450

26,010

25,790

25,350

25,130

24,910

15,870

19,180

22,040

22,920

23,360

23,800

23,360

23,140

22,700

22,480

22,260

22,260

21,380

15,870

18,730

21,160

20,940

20,500

20,280

20,060

20,060

19,840

19,840

12,780

14,770

16,310

17,190

17,190

16,310

870.M.KA11.5ST9 MP70 abgestütztTabelle Nr.: Prospekt 2002 ...I.14112002080248

Bearbeiter: kalue]atum : 14.11.2002

Hyd. FH C 300/220KA 11.5 (Teile Nr. D 010385)

GKST 9.0 (Teile Nr. D 010392)

II / S.5

Hyd. FH C 300/220

KA 11.5 (Teile Nr. D 010385)

GKST 9.0 (Teile Nr. D 010392)

807570656055504540353025201510Feet

Meters

50 85 90

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

- 10

- 9

- 8

- 7

- 6

- 5

- 4

- 3

- 2

- 1

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

0

5

10

15

20

25

30

35

40

45

50

55

-25

-20

-15

-10

-5

-30

19

20

60

6521

22

Meters Feet

machine shown in mirror image14112002080248

Boom Position IK20

870 M■ Undercarriage: MP70, 4-point outriggers

tires 8 x 16.00-25■ Boom: 37'9"■ Stick: 29'6"■ Boom position: I■ Cab: D 300/260 maXCab hydraulic elevating and forward

moving cab with operator’s eye level 21'6"

6180 HMC

4400Star-Lifter

5

39,240

15,210

12,560

12,780

13,880

15,210

16,310

57,980

37,690

23,580

20,060

19,400

19,620

20,280

20,940

38,800

44,970

50,480

48,500

34,170

29,320

27,550

27,110

27,330

28,210

33,280

37,250

40,780

43,870

46,290

47,390

43,650

40,560

39,900

40,780

26,890

29,320

32,180

34,610

36,810

38,580

39,680

40,120

39,900

38,800

36,810

23,140

24,690

26,670

28,430

30,200

31,960

33,280

34,170

34,170

33,950

33,500

31,740

13,880

8.1

20,060

20,280

20,940

22,040

23,140

24,470

25,790

27,110

28,210

29,320

29,320

29,100

28,880

28,650

27,550

13,000

16,750

19,840

20,280

20,940

21,820

22,700

23,580

24,690

25,570

25,790

25,350

25,130

24,910

24,910

23,800

14,770

17,850

20,060

20,720

21,380

22,040

22,700

22,920

22,480

22,260

22,040

22,040

14,100

16,530

18,950

20,720

20,500

20,280

20,060

19,840

870.M.BA11.5ST9 MP70 abgestütztTabelle Nr.: Prospekt 2002 ...I.15112002074357

Bearbeiter: kalue]atum : 15.11.2002

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

807570656055504540353025201510Feet

Meters

50 85 90

- 13

- 12

- 11

- 10

- 9

- 8

- 7

- 6

- 5

- 4

- 3

- 2

- 1

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

0

5

10

15

20

25

30

35

40

45

50

55

-25

-20

-15

-10

-5

-30

-35

-40

Meters Feet

machine shown in mirror image15112002074357

Boom Position IB19

870 M■ Undercarriage: MP70, 4-point outriggers

tires 8 x 16.00-25■ Boom: 37'9" banana type■ Stick: 29'6"■ Boom position: I■ Cab: D 270 maXCab hydraulic elevating cab

with operator’s eye level 20'2"

6180 HMC

4400Star-Lifter

6

Machine Specifications

■ 870 M with 8'10" hydraulic elevating Cab Type - maXCab D 270

13'9"

12'1"

21'4"

23'7"

11'1

0"8'

10"

20'8

"

10"

12'7

"

10'10"

6'10"

16'9"

18'7"

5'7"

13'7

"

12'5"

13'9"

12'1"

21'4"

23'7"

11'1

0"8'

10"

20'8

"

10"

12'7

"

10'10"

6'10"

16'9"

18'7"

5'7"

13'7

"

12'5"

■ 870 M with fixed cab height 4'11"

8'6" 9'10"

18'4"

12'2

"

22'

9'10

"

13'9"

13'7

"

■ 870 M with hydraulic elevating and forward moving Cab Type - maXCab D 300/260

Depending upon tolerances, measurements may vary.

6180 HMC

4400Star-Lifter

7

51'2"

12'7

"

*13'

7"

870 M with Boom 34'5" and Stick 26'3"

54'5"

12'7

"

*13'

7"

870 M with Boom 37'9" and Stick 29'6"

870 M with Banana Boom 37'9" and special Stick 29'6"

53'8"

12'7

"

*13'

7"

Shipping Specifications

*Removable for transport

870

M-C

-US

A-1

211-

2.5www.sennebogen-na.com

Under our policy of continuous improvement, we reserve the right to change specifications and design without prior notice. The illustrations shown may include optional equipment.

SENNEBOGEN LLC1957 Sennebogen TrailStanley, NC 28164, USATelephone: 704-347-4910Fax: 704-347-8894E-Mail: sales@sennebogenllc.com

Left side compartment holds key components■ Diesel tank■ Electrical box with all fuses and relays for easy access

and centralized electrical maintenance■ Central lubrication system■ Centralized pressure test ports for trouble shooting

of all working functions

Serviceability■ The C Series machines offer a coarse particle separator

at the front of engine cooler and air filter■ Ease of access for air filter and battery maintenance■ Hydraulic oil cooler separated from radiator, mounted on

the left side towards the back of the machine, hydraulically driven and easy to clean

■ The radiator fan is reversible and controlled from the cab, allowing the driver to clean out any debris from the radiator compartment

Comfortable maXCab operator’s cab■ Sliding door and walkway for increased operator safety■ Advanced design, clear layout■ Low noise and vibration■ Excellent all-round visibility■ Fully adjustable air suspension seat, heated■ Heating and air conditioning with fresh / recirculation

airflow and air filter

Large engine compartment■ Powerful water-cooled Caterpillar diesel engine

longitudinally mounted for ease of access■ Daily service conveniently and easily performed

from ground level■ Large access door with gas shocks provide easy

access to engine compartment

6180 HMC

4400Star-Lifter