VARIABLE SPEED MOTORS Direct drive cooling tower motor and ...
The · motors in all models cooling towers, Marine rated motors exceed the characteristics of the...
-
Upload
dinhnguyet -
Category
Documents
-
view
217 -
download
2
Transcript of The · motors in all models cooling towers, Marine rated motors exceed the characteristics of the...
LSFG-8 LOW SOUND & SLSFG-10 SUPER LOW SOUND TOWER FEATURES
Leaders in “ All-Fiberglass ” Cooling Towers
REYMSA´s success is the result of 35 years of experience in cooling towers. We have been putting ideas into action by researching and developing the latest technology, therefore we are proud to offer the
for sound sensitive applications.Low Sound Series
Keep the peace and reduce your impact on others, use Low Sound Tower Series from REYMSA.
All FRP Seamless One piece construction.
Corrosion resistant.
UV Protection for extended life.
Fiberglass-Reinforced-Polyamide adjustable pitch blades.
One piece seamless basin design.
Fixed distribution nozzles with variable flow rates.
Self extinguish PVC fill & PVC drift eliminator.
Low and Super Low sound.
Sickle fan blades for reduced sound.
Low RPM motor.
Triple-pass PVC air inlet louvers.
No moving internal parts.
Single or multiple fan configurations with common sump.
Light weight.
Stable thermal composition.
Minimal maintenance.
THERMAL PERFORMANCE CERTIFIED BY THE COOLING TECHNOLOGY INSTITUTE
REYMSA´s complete line of LSFG-8 & SLSFG-10 models towers are certified by theCTI in accordance to Standard STD-201.
ALL FIBERGLASS SUPERIOR ADVANTAGES
Corrosion resistant.
Major longevity, life expectancy of 30 plus years.
No risk of water leakage, a unique seamless, one piece construction.
Better appearance, aesthetically superior to other cooling towers.
UV (Ultra Violet) inhibitor Gel-Coat applied on the Exterior and Interior surfaces gives superior
protection against harsh environmental conditions and aggressive chemical treatment.
FRP is not affected by the corrosive sediments collected in the basin. Most metal tower
manufactures (galvanized and stainless steel) require frequent draining, flushing and cleaning of
the sediment to try to prevent corrosion.
Greater resistance to a wide spectrum of pH´s, total dissolved solids, chlorides and sulfates from
the water treatment.
Capable of enduring a much higher concentration of chlorides in the water than "any" steel
(galvanized and /or stainless) cooling tower. REYMSA all fiberglass cooling tower is a perfect
partner for Pulse Power non-chemical water treatment applications that handle up to a 400 ppm
chloride concentration in the recirculation water. These application would mean more cycles of
concentration and less water loss due to bleed off or blow-downs.
Eliminates the use of pulleys, belts, bearing and couplings and the associated cost, time and inconveniences of maintaining them.
Increases reliability and greatly reduces risk of failure, with only one moving part.
REYMSA uses the best fan on the market, manufactured using cast aluminum hubs and adjustable pitch air foil sickle blades molded with fiberglass reinforced polyamide, which is spark and corrosive resistant, able to resist high vibration levels and high temperatures. Ambient operating air temperatures may fluctuate from – 50°F to 250°F.
Fan Motors: REYMSA exclusively uses Marine rated motors in all models cooling towers, Marine rated motors exceed the characteristics of the standard Cooling Tower Duty motors. REYMSA Fan Motors are NEMA Premium Efficient, TEFC, 1.15 service factor, 100% cast iron construction for SEVERE DUTY, INVERTER DUTY, and MARINE DUTY applications, EPOXY PAINT, inpro/ seal vbx bearing isolators on both ends of the shaft, brass drain and breather, 6-60 hz variable torque.
DIRECT DRIVE FAN MOTOR FEATURES
2½" N.P.T. ABS-Spray Nozzleswith interchangeable
internal devices
THE MOST RELIABLE HOT WATER DISTRIBUTION SYSTEM
NON CLOGGING SPRAY NOZZLES
HIGHEST SURFACE TO VOLUME RATIO PVC FILL FOR SMALLER FOOTPRINT
By having the highest specific surface area ft2/ft3, our fill provides the most surface area for heat transfer for all HVAC and most Industrial applications. The PVC compounds used in our fill have outstanding resistance to weather and are nearly impervious to chemical degradation by alkali, acids, grease, fats, oils and biological attack. Also has excellent fire rat ing due to i ts sel f-ext inguishing characteristics and meets or exceeds Cooling Technology Institute (CTI) PVC materials standard 136.
Hot water manifold manufactured of PVC with welded branches tested at 100 psig., to assure reliability and prevent water leakages that affect the tower efficiency, due to wearing of union gasket as other manufacturers do.
Fixed, non-clogging orifice nozzles, 2 ½", N.P.T., largest in the market, manufactured in ABS plastic, able to handle up to 180°F water temperature, with interchangeable internal devices so that water is efficiently and uniformly distributed across the entire fill surface. Nozzle body has threaded connection and it is easy to remove.
Our triple pass PVC air inlet louvers low pressure drop that results in less fan motor energy
consumption. The potential of algae growth is reduced, therefore reducing water treatment and maintenance cost. Additional characteristics are its durability by being corrosion-free and impervious to chemical attacks. PVC is specially formulated for UV and fire resistance, non-combustible and self extinguishing.
are designed to minimize direct sunlight to the water, reduce splash out and reduce noise while having
ALL COOLING TOWERS ARE ASSEMBLED AND TESTED PRIOR TO SHIPMENT
EASILY REMOVABLE AIR INLET LOUVERS
EASY MAINTENANCE AND CLEANING ACCESS
Wide and easily accessible for monitoring or cleaning.
RemovableAccess Door
RemovableAir inlet Louvers
A COMPANY FOUNDED IN 1969 WHOREALLY UNDERSTANDS THE IMPORTANCE
OF HAVING SATISFIED CUSTOMERS TOBUILD LONG TERM RELATIONSHIPS
Assembly is simply bolting the fan cylinder to the one piece, body/basin section. There are no gaskets required.
The reduced footprint of our induced draft, counterflow design requires less structural base support and frequently less piping than the crossflow towers.
Automatic Sand Filtration System
Basin Sweeper piping for water filtration.
Basin heaters and control panel.
Electric water level controller and valve.
Fire Sprinkler System.
EASY AND ECONOMICAL ASSEMBLY AND INSTALLATION
OPTIONAL EQUIPMENT
Access ladder.
Stainless steel handrail.
Stainless steel non-skid catwalk.
Vibration switch.
Sound / air deflectors.
OPTIONAL DESIGNS WITH CUSTOMIZED COMPONENTS OR COLORS FOR SPECIAL APPLICATIONS
LOW & SUPER LOW SOUND MODELS
Special fills for industrial applications with bigger flutes, vertical design or for higher than 130°F water temperature.
Tower casing construction with flame retardant resin according to the ASTM-E84 Standard.
Special Colors, Designs or Configurations
LSFG-8-60610 to LSFG-8-812125
SLSFG-10-606103 to SLSFG-10-812125
LSFG-8-714203 to LSFG-8-816215
SLSFG-10-714203 to SLSFG-10-816215
LSFG-8-1414403 to LSFG-8-1616415
SLSFG-10-1414403 to SLSFG-10-1616415
SINGLE FAN DOUBLE FAN QUADRUPLE FAN
CONSTRUCTION DETAILS
11
9
7
12
6
4
2
13
10
5
1
3
8
Water Make up
Cold Water Outlet
Mounting Holes
Overflow (back side)
Drain (back side)
Purge (back side)
11.
12.
13.
14.
15.
16.
Hot Water Inlet
Body Section
Cellular Fill
Air Inlet Louvers
Basin Section
Fan Section
Plenum
Drift Eliminator
Lifting Eyes
Spray Nozzle Manifold
6.
7.
8.
9.
10.
1.
2.
3.
4.
5.
LSFG-8 SERIES
MODELDIMENSIONS WEIGHT *NOMINAL
TONSL W H SHIPPING OPERATING
LSFG-8-606103LSFG-8-606105LSFG-8-606175LSFG-8-707103LSFG-8-707105LSFG-8-707175LSFG-8-708103LSFG-8-708105LSFG-8-708175LSFG-8-708110LSFG-8-709103LSFG-8-709105LSFG-8-709175LSFG-8-709110LSFG-8-709115LSFG-8-808103LSFG-8-808105LSFG-8-808175LSFG-8-808110LSFG-8-808115LSFG-8-810103LSFG-8-810105LSFG-8-810175LSFG-8-810110LSFG-8-810115LSFG-8-810120LSFG-8-812105LSFG-8-812175LSFG-8-812110LSFG-8-812115LSFG-8-812120LSFG-8-812125LSFG-8-714203LSFG-8-714205LSFG-8-714275LSFG-8-816203LSFG-8-816205LSFG-8-816275LSFG-8-816210LSFG-8-816215LSFG-8-822275**LSFG-8-822210**LSFG-8-822215**LSFG-8-822220**LSFG-8-827275**LSFG-8-827210**LSFG-8-827215**LSFG-8-827220**LSFG-8-1414403LSFG-8-1414405LSFG-8-1414475LSFG-8-1616403LSFG-8-1616405LSFG-8-1616475LSFG-8-1616410LSFG-8-1616415LSFG-8-1622475LSFG-8-1622410LSFG-8-1622415LSFG-8-1622420LSFG-8-1627475LSFG-8-1627410LSFG-8-1627415LSFG-8-1627420
ENGINEERING DATA
7997111871111299011713615092
12114115518993
12214515819496
128153171211242134151176224259280171218252186245290318389312345432507306357454529346438509369484566624761624690864
1013613714909
1057
44154415441556245624562462306230623062306863686368636863686369926992699269926992852285228522852285228522996599659965996599659965
1081810818108181321313213132131321313213194451944519445194452554025540255402554021637216372163726427264272642726427264273839038390383903839051080510805108051080
189018901890255325532553271727172717271729122912291229122912298629862986298629863548354835483548354835484028402840284028402840284674467446745476547654765476547679507950795079509435943594359435934993499349
10953109531095310953109531540015400154001540018870188701887018870
127127127139139139139139139139139139139139139163163163163163 163163163163163163164164164164164164139139139168168168168168282282282282301301301301139139139168168168168168205205205205
209209209209
¾¾¾¾
737373
8383838484 8484 5
858585859696969696969696969696969696969696
838383
1991991991991999898989898989898174174174201201201201201198198198198
197197197197
½½½
8 ¾¾¾¾¾
½½½½½½½½
¾¾¾¾¾¾¾¾
½½½½
737373
8383839696 9696
110110110110110
9696 969696
120120120120120120145145145145145145167167167
108108108108108268268268268328328328328175175175
199199199199199268268268268328328328328
½½½
¾¾¾¾¾
½½½½½½
¾¾¾¾¾
½½½½½
* A Nominal TON is defined as 3 GPM of water cooled from 95°F to 85°F with a 78°F entering wet bulb.
** Modular sections to be assembled for higher tonage requirements. Minimum two modules. Contact your Rep for proper selection.
1. All dimensions, weights and capacities are in inches, pounds and gallons. Physical dimensions of each tower are approximate and are subject to change.
2. All double and quadruple models have double fittings and connections.
737373
8383838484 8484 5
858585859696969696969696969696969696969696
838383
1991991991991999898989898989898174174174201201201201201198198198198
197197197197
½½½
8 ¾¾¾¾¾
½½½½½½½½
¾¾¾¾¾¾¾¾
½½½½
SLSFG-10 SERIES
ENGINEERING DATA
MODELDIMENSIONS WEIGHT *NOMINAL
TONSL W H SHIPPING OPERATING
737373
8383839696 9696
110110110110110
9696 969696
120120120120120120145145145145145145167167167
108108108108108268268268268328328328328175175175
199199199199199268268268268328328328328
½½½
¾¾¾¾¾
½½½½½½
¾¾¾¾¾
½½½½½
127127127139139139139139139139139139139139139163163163163163 163163163163163163164164164164164164139139139168168168168168282282282282301301301301139139139168168168168168205205205205
209209209209
¾¾¾¾
189018901890255325532553271727172717271729122912291229122912298629862986298629863548354835483548354835484028402840284028402840284674467446745476547654765476547679507950795079509435943594359435934993499349
10953109531095310953109531540015400154001540018870188701887018870
SLSFG-10-606103SLSFG-10-606105SLSFG-10-606175SLSFG-10-707103SLSFG-10-707105SLSFG-10-707175SLSFG-10-708103SLSFG-10-708105SLSFG-10-708175SLSFG-10-708110SLSFG-10-709103SLSFG-10-709105SLSFG-10-709175SLSFG-10-709110SLSFG-10-709115SLSFG-10-808103SLSFG-10-808105SLSFG-10-808175SLSFG-10-808110SLSFG-10-808115SLSFG-10-810103SLSFG-10-810105SLSFG-10-810175SLSFG-10-810110SLSFG-10-810115SLSFG-10-810120SLSFG-10-812105SLSFG-10-812175SLSFG-10-812110SLSFG-10-812115SLSFG-10-812120SLSFG-10-812125SLSFG-10-714203SLSFG-10-714205SLSFG-10-714275SLSFG-10-816203SLSFG-10-816205SLSFG-10-816275SLSFG-10-816210SLSFG-10-816215SLSFG-10-822275**SLSFG-10-822210**SLSFG-10-822215**SLSFG-10-822220**SLSFG-10-827275**SLSFG-10-827210**SLSFG-10-827215**SLSFG-10-827220**SLSFG-10-1414403SLSFG-10-1414405SLSFG-10-1414475SLSFG-10-1616403SLSFG-10-1616405SLSFG-10-1616475SLSFG-10-1616410SLSFG-10-1616415SLSFG-10-1622475SLSFG-10-1622410SLSFG-10-1622415SLSFG-10-1622420SLSFG-10-1627475SLSFG-10-1627410SLSFG-10-1627415SLSFG-10-1627420
44154415441556245624562462306230623062306863686368636863686369926992699269926992852285228522852285228522996599659965996599659965
1081810818108181321313213132131321313213194451944519445194452554025540255402554021637216372163726427264272642726427264273839038390383903839051080510805108051080
8294
1059311113297117140159 101122148171194103124153174200108131161191222240134171200238265298182214256205248304350401329387458495345406483528369437519406491598677778660776921
1000690812965
1057
* A Nominal TON is defined as 3 GPM of water cooled from 95°F to 85°F with a 78°F entering wet bulb.
** Modular sections to be assembled for higher tonage requirements. Minimum two modules. Contact your Rep for proper selection.
1. All dimensions, weights and capacities are in inches, pounds and gallons. Physical dimensions of each tower are approximate and are subject to change.
2. All double and quadruple models have double fittings and connections.
www.reymsa.com
R
REYMSA COOLING TOWERS, INC.
Toll Free Number 1-866-445-2043
1641 World Trade Center, Millenium Industrial Park Laredo, Tx. 78045
Phone (210) 579-4837 Fax (210) 745-1513