Pneumatic Control System

Created By :Hardy ArtantoValen Gerald SuluM. Risky YasinXII TOI2Pneumatic Control System

Introducing

Pneumatics is a propulsion system that uses air pressure as the driving force. How it works just the same Pneumatic hydraulic distinguishes only driving force. If using a pneumatic air as the driving force, and while using the hydraulic fluid oil as its driving force. In pneumatic air pressure is what serves to move a working cylinder. Working cylinder is what will change the power / air pressure into mechanical energy (movement back and forth in the cylinder).

PurposeCreating a bottle opener control with pneumatic system

Scope

Responsibility

SafetyGlasses, It is can protect your eye from a air pressure

Safety shoes,Can protect your foot from materials drop to ground

Warepack,You will be fresh to wear it

safety gloves,

safety mask

Materials1.Kompressor (Power Pack), Serves as the unit produces pressurized air.

2.Air Service Unit (ASU), Serves as penvaring air containing water and set the desired air pressure.

3.Push Button, At the time of NO, he will operate remove the air, but at the time of the NC, then he will be back to normal.

Roller Lever Control (Steering Valve 3/2)

5.Double Acting Cylinder (DAC), Serves as a modifier of air pressure menajadi translational motion shaft DAC

6.Single Acting Cylinder (SAC. Actuator), Serves as a modifier of air pressure into motion press the lid.

ProceduresFirst, prepare all matrials pneumatik used

Than, assemble the control in accordance with worksheet

After that, turn on the kompressor, wait until air reasches the pressure

Next, open valve at air service unit for supply air pressure

Finally, run the control in accordance with the worksheet