Innavisions Ltd Leigh, Worcester, WR6 5LA Tel: 01886 … 2015 Brochure V10.2.pdf · Leigh,...

Plastic Packaging Product Brochure

[email protected]

Innavisions LtdUnit 4, Bank Farm OfficesLeigh, Worcester, WR6 5LA

Tel: 01886 832283Fax: 01886 832850

2017

How do we operate?

Innavisions are the exclusive UK Sales and Product Development partners to three leading European plastic packaging manufacturers.

These manufacturers’ products combine to offer the widest range of standard injection moulded food packaging in the UK. Our UK Sales Office offers the customer a single point of contact for all communication, to ensure that you the customer gets the right product on time and in full. Shipping and invoicing is done directly from the manufacturer, so that we can offer the best possible prices. The best of both worlds.

Innavisions also works closely with the manufacturers to offer new and innovative bespoke packaging solutions and our recent track record of doing this can be seen on the UK supermarket shelves.

In addition, Innavisions works with alternative approved European manufacturers to offer off the shelf solutions where the need arises.

Manufacturing Partners

Our manufacturing partners areBRC & 9001 accredited

An old established Turkish company which started producing plastic packaging in 2003. The manufacturing site in Istanbul was created from scratch within the external walls of their existing building. Accredited BRC/IOP

Established since 1985 operating from its site in Oss, The Netherlands with plans in place for significant expansion over the next 3 years. Accredited to BRC/IOP.

We are a small team with over 60 years experience creating & delivering plastic packaging to food customers in the UK. Innavisions provides standard off the shelf items as well as custom made packaging solutions.

Established for 15 years, we specialise in injection moulded plastic food packaging which is tamper evident or film sealable. Service is the key to our philosophy and we are proud to have long and ongoing relationships with the majority of our customers.

Nick WildSales & Marketing Director

Head of UK SalesHead of Innovation

Paul BagnallManaging Director

Dear Customer

Based in a new 2014 purpose built manufacturing site in Herentals, Belgium which is designed to be as environmentally friendly as possible. Accredited BRC/IOP, ISO 9001 and ISO 14001.

Paul &

Tamper Evident Design

Suitable for Freezing

Microwavable

Recyclable

BRC/IOP Credited

Can be Filled Hot

Film Sealed

Transparent Grades

Lids Options Available

Handle Options Available

Liquid Tight Lid

Film Sealable Injection moulded PP The PP packs are easily film sealed with standard sealing materials and all have the option of an over-lid if required. All sizes are available from stock in transparent PP and most are available with In Mould Lable decoration subject to a minium order size. Standard material grades are suitable for chill and ambient applications. Freeze grades are available by special order.

Injection moulded in PP, the packs offer a clip on lid with good seal properties. They are non-tamper evident style which can be preferred for certain applications. Decoration options vary depending upon the pack.

8-9

38-39

34-35

16-17

18-19

20-21

12-15

22-23

24-25

28-29

30-31

Contents How to use this brochure

A. Key Features

What do you need? Choose your container.

B. Branding 1. Type Of Container 3. Range2. Description Page NumberBelow are listed some of the key

features you may need to look for.Do you need to show off your brand?

What type of container do you need? And what key features are available in this range.

What shape container do you need?Is this type of container exactly what you are looking for?

In Mould LabellingIn Mould Labelling offers the highest quality decoration

Round

Square, Rectangular, Oval

Round

Rectangular

Post Mould LabelHigh quality

adhesive labels for smaller orders

Injection moulded in PP, the tamper evident range offers the widest range available in the UK. All offer a liquid tight lid closure which can be applied automatically or by hand. All sizes are available from stock in transparent PP and most are available with In Mould Label decoration subject to a minimum order size. Standard material grades are suitable for chill and ambient applications. Freeze grades are available by special order.

Tamper Evident Injection moulded PP

Innovation allows you to offer a completely bespoke solution whatever your requirements. We have years of experience working for some of the biggest names in the business to make this process as simple and affective as possible.

Creativity - Bespoke

Offset Print Line work print

directly on the tub

Round

Oval

Special Round

Square

Rectangle

Buckets

Standard Containers Injection moulded PP

54

Specta Vis

Film Sealable Trays

Injection moulded PP

Most are thermoformed in PP, although some are offered in PS and PET also. The particular application which dictate the most suitable material and hence options available.

These packs are available in PP, which is unique in Europe for this style of pack, or in paperboard. High quality offset print is offered on the tubs while lid decoration options vary according to the product. A cost effective format for a printed pack.

Innavisions can offer a number of specialised products designed for particular markets, and sometimes utilizing unique technical developments. These are constantly evolving, but noted here are a few which are currently available.

All trays listed here, either injection moulded or thermoformed, are manufactured in PP and are therefore suitable for hot filling and microwaving. The injection moulded range are more robust and are generally slightly heavier gauge. In addition they generally have smooth straight walls whereas thermoformed trays have ridged walls for added strength. Not all trays are available as stock items, and this does vary from time to time, so it is advisable to check leadtimes.

38-39

42-43

46-47

50-51

52-53

54

Culidish

Twist Top Containers

Round

Promotional Drinking Cups

Round, Rectangular

Injection Moulded

Thermoformed

Ovenable

New Products Injection moulded PP

Thermoformed Thermoformed PP

CreativityNew Technology and Bespoke Design

Innovation allows you to offer a completely bespoke solution whatever your requirements. We have years of experience working for some of the biggest names in the business to make this process as simple and affective as possible.

We have a thorough understanding of:

Needs and Trends in Consumer Behaviour

Our customers food processing business

The technology and capability of our manufacturers

This creates innovative new products that meets the commercial requirements of the market.

76

Cre

ativity

CreativityNew Technology and Bespoke Design

Initial Idea

Concept Design

Detailed Development

Product Finalisation

Prepare for Manufacture

Launch

1.

2.

3.

4.

5.

6.

Brief from Customer

Commercial challenges.

Market dynamics.

Timeframes.

Design Sketching range of options.

Broad Budget Costings.

Approximate Time lines.

Concept Selection

3D CAD + Modelling.

Accurate Time Lines.

Budget Costs.

Consumer Market testing / focus groups.

Costings finalised.

Accurate Time Lines.

Check list.

Critical Paths.

Prototype Tooling.

Decoration.

Product Testing.

Filling Trials.

Product on the Shelf.

Food Processing.

Distribution issues.

Consumer requirements.

The Innavisions Process

1. Sketching

4. Thermal Dynamics

2. Prototyping

5. Production Set Up

3. User Testing

6. Product Launch

Case Study

Distribution and Packaging Tests.

Consumer and In Store Testing.

Final Adjustments.

Contracts Agreed.

Food Processing Challenges.

99

Ne

ed

som

eth

ing

be

spo

ke?

Order samples on 01886 832283 or [email protected]

Cu

stom

De

sign

98 Order samples on 01886 832283 or [email protected] To use our interactive catalogue visit our website www.innavisions.com

Tamp

er E

vide

nt

SpecialsOvalRectangularSquareRound

Shapes Available

Features

Innavisions offer the widest range of tamper evident style packs in the UK ranging in size from 30ml to 5000ml. Round packs make up the largest section of standard items, but in addition some interesting shapes are offered under a standard round lid. Adding to the options available are square, rectangular and oval ranges, some of which are unique in the market place.

Tamper evident style packs offer some great benefits to both the food packer and to the end consumer. They are easy and simple to close, either by machine or by hand, and have the ability to be re-closed by the consumer. The closure is liquid tight whilst the tamper evident rim protects the lid from being accidentally removed during transit. The PP material does offer the ability to hot fill and to microwave the pack, within limitations.

Nearly all the packs listed are held as stock items in transparent PP by the manufacturer. Customisation is available with colouring of the PP and with branding via In Mould Labelling (IML), which offers the highest quality of print in a permanent format. These are subject to minimum order sizes.

All packs are produced with fully direct food contact approved grades of PP in manufacturing facilities fully accredited to grade A level BRC/IOP.

Tamper EvidentInjection Moulded, PP

1110

Tamp

er E

vide

nt

Ro

un

d

Diameter Item Number Capacity Height IML Handle In Stock

48mm

TP48-30 30ml 31mm

TP48-50 50ml 50mm

TP48-D Standard Lid

69mm

TP69-80 80ml 33mm

TP69-120 120ml 52mm

TP69-155 155ml 68mm

TP69-D Standard Lid

TP69-D-V Vented Lid

78mmE137 180ml 78mm

E138 Standard Lid

86mm

CC86-250 250ml 80mm

CC86-330 330ml 106mm

CC86-D Standard Lid

CC86-DTH Top Hat Lid

87mm

TP87-310 310ml 75mm

TP87-385 385ml 94mm

TP87-D Standard Lid

95mm

TP95-180 180ml 43mm

TP95-210 210ml 52mm

TP95-225 225ml 51mm

TP95-280 280ml 65mm

TP95-315 315ml 73mm

TP95-365 365ml 84mm

TP95-520 520ml 117mm TP95-D Standard Lid

TP95-OD Overlid

95mm

SC95-220 190ml 43mm

SC95-265 240ml 52mm

SC95-325 290ml 64mm

SC95-400 400ml 86mm

SC95-565 535ml 119mm

SC95-D Standard Lid

95mm

Elito SCE95-240 260ml 70mm

Hex SCH95-240 250ml 70mm

Bowl SCC95-300 288ml 60mm

Taper SC95-310 330ml 76mm

105mmE224 670ml 132mm

E223 Standard Lid

109mmSC109-650 600ml 100mm

SC109-D Standard Lid

Order samples on 01886 832283 or [email protected] To use our interactive catalogue visit our website www.innavisions.com

With In Mould Labelling & Board Sleeve

TP48-30ml | TP95-520ml | SC95-325 (290ml)

RoundTamper Evident

Tamp

er E

vide

nt

Ro

un

d

1312

TP118-300ml | TP118-870ml | TP118-565ml

Tamp

er E

vide

nt

Ro

un

d


Tamper EvidentRound

Diameter Item Number Capacity Height IML Handle In Stock

118mm

TP118-300 300ml 50mm

TP118-480 480ml 69mm

TP118-565 565ml 80mm

TP118-600 600ml 88mm

TP118-870 870ml 127mm

TP118-1025 1025ml 143mm

TP118-D Standard Lid

TP118-D-V Vented Lid

118mm

SC118-300 300ml 48mm

SC118-340 340ml 64mm

SC118-350 350ml 55mm

SC118-400 400ml 64mm

SC118-500 500ml 74mm

SC118-600 600ml 88mm

SC118-700 700ml 108mm

SC118-870 870ml 128mm Elito SCE118-565 565ml 86mm HEX SCH118-370 370ml 68mm


SCC118-D Lid + 30ml

SC118-D-V Vented Lid

133mmTP133-1180 1180ml 130mm


133mm

SC133-800 800ml 85mm

SC133-1200 1200ml 130mm

SC133-1530 1530ml 168mm


146mm

SC146-500 500ml 52mm

SC146-750 750ml 70mm

SC146-1000 1000ml 88mm

SCE146-1140 1140ml 110mm

SC146-1500 1500ml 138mm

Elito SCE146-1140 1140 ml 110mm


160mmSC160-2500 2500ml 179mm


184mmTP184-1500 1500ml 79mm


With In Mould Labelling

1514

Tamp

er E

vide

nt

Ro

un

d

Tamp

er E

vide

nt



To use our interactive catalogue visit our website www.innavisions.com

Special Rounds

Tamper Evident

Round Hexagonal

Diameter Item Number Capacity Height IML In Stock

95mmSCH95-240 240ml 70mm

SC95-D Standard Lid

118mmSCH118-370 370ml 70mm


“CittyCup”


86mm

CC86-250 250ml 80mm

CC86-330 330ml 106mm

CC86-D Standard Lid

CC86-THD Top Hat Lid

95mmCC95-500 500ml 130mm

SC95-D Standard Lid

Insert for 95 mm dia Containers


94mmSCE94-125 125ml 35mm

CC86-D Standard Lid

95mm

SC95-325 280ml 64mm

SC95-400 388ml 86mm

SC95-565 520ml 119mm

CC95-500 500ml 130mm

SCE118-565ml | CC95-500ml | SCH95-240ml

17

Sircle Elito


95mmSCE95-240 240ml 70mm

SC95-D Standard Lid

118mmSCE118-565 565ml


146mmSCE146-1140 1140ml 110mm


16

Tamp

er E

vide

nt

Spe

cial

Tamp

er E

vide

nt


Square


Tamp

er E

vide

nt

Squ

are

Tamper Evident

1918

Dimensions Item Number Capacity Height IML In Stock

79x79mm

TPS79-125 125ml 34mm

TPS79-150 150ml 41mm

TPS79-225 225ml 57mm

TPS79-280 280ml 69mm

TPS79-365 365ml 92mm

TPS79-425 425ml 110mm

TPS79-D Standard Lid

TPS79-DO Dome Lid - Straight

TPS79-SD Hinged Lid

TP579-DS Domed Lid Saphire

TP579-ID

88x88 mm

RA88-360 360ml 68mm

RA88-D Hinged Lid

90x90 mm

SDB9090-350 350ml 68mm

Attached Hinged Lid

128x128 mm

TPS128-500 550ml 55mm

TPS128-600 680ml 65mm

TPS128-750 790ml 75mm

TPS128-900 960ml 90mm

TPS128-1100 1280ml 118mm


192x192 mm

TPS192-1300 1300ml 50mm

TPS192-2000 2000ml 77mm

TPS192-2140 2140ml 79mm

TPS192-2500 2500ml 94mm

TPS192-3000 3000ml 112mm

TPS192-4000 4000ml 150mm

TPS192-5000 5000ml 191mm


TPS79-365ml | TPS128-1100 (1280ml) | TPS79-125ml | SDB9090-350ml

Inlaying Lid

Tamp

er E

vide

nt

Ro

un

d


400ml 750ml 900ml

With Labelling or Decoration

Rectangular

Tamper Evident

Diameter Item Number Capacity Height IML Stock Product

111x85 mm

TPR1108-200 200ml 40mm

TPR1108-300 300ml 56mm

TPR1108-D Standard Lid

120x88 mm

RA120-270 270ml 42mm

RA120-D Standard Lid

120x88mm

TPR1208-200 200ml 32mm

TPR1208-270 270ml 42mm

TPR1208-425 425ml 69mm


138x98 mm

RA138-425 425ml 51mm

RA138-600 600ml 71mm


178x108 mm

TPRK1912-1180 1180ml 88mm

TPRK1912-D Standard Lid

180x110 mm

RA180-550 550ml 47mm

RA180-1100 1100ml 94mm


183x115 mm

E146 500ml 40mm

E129 700ml 53mm

E130 Standard Lid

192x128 mm

RA192-1200 1200ml 73mm

RA192-1600 1600ml 94mm

RA192-1800 1800ml 106mm


192x128 mm

TPR1912-750 750ml 47mm

TPR1912-1000 1000ml 67mm

TPR1912-1200 1200ml 73mm

TPR1912-1600 1600ml 92mm


Tamp

er E

vide

nt

Re

ctang

ular

To use our interactive catalogue visit our website www.innavisions.com 2120

RA120-270ml | TPR1912-1600ml | RA138-425ml


Tamp

er E

vide

nt

Ro

un

d


400ml 750ml 900ml


Oval and Oval Rectangles

Tamper Evident

Oval

OTE

RTE

Dimensions Item Number Capacity Height IML Stock product

110x80 mm

EC110-175 175ml 40mm

EC110-D Standard Lid

132x94 mm

EC132-275 275ml 37mm

EC132-345 345ml 48mm

EC132-510 510ml 75mm

EC132-D Standard Lid

ECC132-D Standard Lid

182x133 mm

EC182-800 800ml 61mm

EC182-1100 1100ml 85mm

ECC182-D Standard Lid

Dimensions Item Number Capacity Height IML Stock product

130x103 mm

RTE130-550 550ml 79mm

RTE130-D Standard Lid

168X130 mm

RTE168-850 850ml 75mm

RTE168-1250 1250ml 93mm

RTE168-D Standard Lid

Dimensions Item Number Capacity Height IML Stock Product

155x115 mm

OTE155-780 780ml 64mm

OTE155-1200 1200ml 105mm

OTE155-D Standard Lid

RTE168-850ml | EC182-800ml | EC132-510ml

With In Mould Labelling & Board Sleeve

Tamp

er E

vide

nt

Re

ctang

ular an

d O

val


Tamp

er E

vide

nt


400ml 750ml 900ml


Tamper Evident BucketsRound Buckets

Diameter Item Number Capacity Height IML Offset In Stock

133mm 1BKP 1.1L 130mm

144mm 1.6BKP 1.6L 130mm

174mm 2.5BKP 2.7L 157mm

200mm 3GTFLP 3.3L 151mm

225mm 5GTFLP 5.5L 186mm

291mm 10GTFLP 11L 221mm

291mm 12.5BKPM 13L 270mm

307mm 15BKGTFP 15L 315mm

326mm 17.5GTFP 18.5L 273mm

326mm 20BKGTFM 20L 318mm

380mm 30BKPM 30L 388mm

Tamp

er E

vide

nt

Bu

ckets


Rectangular Buckets

Dimensions Item Number Capacity Height IML Offset In Stock

243 x 168 mm

2.5BKRP 2.5L 118mm

236 x 198 mm

5BKRP 5L 148mm

365 x 245 mm

10BKRP 10L 190mm

5BKRP | 1BKP | 3GTFLP

With In Mould Labelling and Offset Print

Injection Moulded, PP

Film Se

alable

SpecialsOvalRectangularSquareRound

Shapes Available

Features

Film Sealable

The standard round diameters are well catered for with this range of high qual-ity injection mould film sealable packs. Adding to this are ranges of square, rectangular and oval packs.

All packs can be easily sealed with standard sealing films. In fact these can also be sourced through Innavisions. The packs are offered with an over lid as an option, if so required. The PP material does offer the ability to hot fill and to microwave the pack, within limitations.

Nearly all the packs listed are held as stock items in transparent PP by the manufacturer. Customisation is available with colouring of the PP and with branding via In Mould Labelling (IML), which offers the highest quality of print in a permanent format. These are subject to minimum order sizes.

All packs are produced with fully direct food contact approved grades of PP in manufacturing facilities fully hygiene accredited to grade A level BRC/IOP.

2726


52mm

RO52-25 25ml 27mm

RO52-50 50ml 46mm

RO52-D Thermoformed Lid

75mm

0007-30 80ml 30mm

0007-43 135ml 43mm

0007-OD Overlid

77mm CSE77-115 115ml 36mm

95mm

RO95-150 155ml 38mm

RO95-200 205ml 41mm

RO95-250 255ml 52mm

RO95-300 303ml 63mm

RO95-400 410ml 88mm

RO95-500 520ml 119mm

0095-OD-A Overlid

0095-OD-AP Overlid for Pasteurisation

151-OD Thermoformed lid

159-OD Thermoformed lid with folding spoon or spork

101mm0010-34 190ml 34mm

0010-OD Overlid

115 mm

RO115-250 260ml 35mm

RO115-300 309ml 41mm

RO115-400 410ml 56mm

RO115-600 611ml 90mm

RO115-OD Overlid

123mm

CSE115-350 350ml 40mm

CSE115-500 500ml 66mm

CSE115-95x3 95mlx3 47mm

CSE115-OD Overlid

127mm

CSE127-400 425ml 55mm

CSE127-800 845ml 119mm

CSE127-D Overlid

RO95-200ml | RO115-600ml | RO52-25ml | 0095-59 (268ml)


Film Se

aled

Ro

un

d

2928

Round

Film Sealable

29


95mm

0095-47-6K 220ml 47mm

0095-59-6K 268ml 59mm

0095-76-6K 326ml 76mm

0095-OD-A Overlid

0095-OD-AP Overlid for Pasturisation

151-OD Thermoformed Lid

159-OD Theromformed lid with folding spoon or spork

Round Hexagonal

Film Se

alable

Ro

un

d


Film Se

alable

Oval &

Re

ctang

le

400ml 750ml 900ml

With In Mould Label

Film Se

aled

Ro

un

d

3130


95x67mm

OSE95-335 335ml 105mm

OSE95-DD Standard Lid

133x91 mm

OSE133-190 190ml 29mm

OSE133-OD Overlid

Film SealableSquare

31


108x77 mm

ECS110-120 120ml 27mm

ECS110-165 165ml 36mm

ECS110-OD Overlid

130x92 mm

ECS132-300 300ml 45mm

ECS132-OD Overlid


114x84mm

111-RSI-200 200ml 40mm

111-RSI-250 250ml 48mm

111-RSI-375 375ml 70mm

111-RSI-60/120 60/120ml 48mm

111-RSI-OD Overlid

659-OD Thermoformed Lid

129x92 mm

RSE129-350 350ml 45mm

RSE129-OD Overlid

133x91 mm

OSE133-190 190ml 29mm

OSE133-OD Overlid

Oval

Oval Rectangle

Rectangular

111RSI-60ml/120ml | SQ090-500ml | ECS110-120ml | OSE133-190ml


Film Se

alable

Ge

ne

ral


78x78mm

RSE79-115 115ml 32mm

RSE79-OD Thermoformed Overlid

94x94mm

SQ090-150 165ml 28mm

SQ090-175 175ml 38mm

SQ090-200 205ml 35mm

SQ090-250 255ml 44mm

SQ090-320 310ml 54mm SQ090-400 415ml 75mm

SQ090-500 525ml 100mm

SQ090-OD Overlid

SQO90-OD-P Overlid

94x94mm SQ094-550 550ml 108mm


Tamp

er E

vide

nt

Th

erm

ofo

rme

d C

on

taine

rs

Injection Moulded, PP

Stand

ard C

on

taine

rs

Shapes Available

Features

Standard Containers are injection moulded in PP and have a clip on lid. They do not have a tamper evident rim and so are sometimes preferred where easy closing and lid removal is important.

Nearly all the packs listed are held as stock items in either natural or transparent PP by the manufacturer. Customisation is available with colouring of the PP and with branding via In Mould Labelling (IML) or dry offset printing as indicated in the brochure. These are subject to minimum order sizes.

This range includes the popular measuring cup range with dry offset printed measurements and also the SP range which give a liquid tight lid fit and is used for chilled soup.


Standard Containers

Round Rectangular Specials

3332

400ml 750ml 900ml

With In Mould Label

35

Ro

un

d

3534

Stand

ard C

on

taine

rs

Round Measuring Cups

Round Soup Pots

Round

Standard Containers

Diameter Item Number Capacity Height Offset Print Stock Product

81mmMB385 368ml 93mm

MB385-D Standard Lid

104mmMB700 669ml 120mm


130mmMB1350 1238ml 142mm


156mmMB2250 2127ml 165mm


Rectangular


170x125 mm

1712-80 1100ml 80mm

1712-D Standard Lid

220x160 mm

2CICN 2000ml 80mm

4CICN 4000ml 150mm

LIDSCICN Standard Lid


185mm

E205 900ml 47mm

E183 1250ml 68mm

OR185-OD Thermoformed Lid

Diameter Item Number Capacity Height Offset Print Stock Product

115mm

SP115-350 350ml 50mm

SP115-500 500ml 68mm

SP115-1000 1000ml 138mm

SP115-D Standard Lid

MB385ml | MB2250ml | SP115-350ml | SP115-1000ml

With In Mould Labelling and Offsetprint


Tamp

er E

vide

nt

Th

erm

ofo

rme

d C

on

taine

rsStan

dard

Co

ntain

ers

Spe

cta Vis

Oth

er/Sp

ecial P

rod

ucts

Innavisions can offer a number of specialised products designed for particular markets, and sometimes utilising unique technical developments. These are constantly evolving, but noted here are a few which are currently available.

Culidish - film sealable square and rectangular packs which utilise Shieltronics technology. This special labelling system allows food products to be reheated at different levels within one microwaving operation. This optimises the heating and hence quality of the reheated food.

Twist Top Jars – injection moulded in PP in two sizes offering a film sealable pack, with In Mould Labelling and a twist off lid.

Promotional Drinking Cups – a unique range of cups with high quality In Mould Label decoration for the promotional and collectable markets. Lids are also available with optional straw holes.

Barrier In Mould Labelling – currently available in a 320ml square pack, this special labelling improves the oxygen permeability by a significant amount to offer improved shelf life for certain product ranges.

PP and Paperboard

Shapes Available

Features

Square Oval SpecialsRectangularRound

Special and New Products

3736

With In Mould Label

393938

Special and New Products

39

Oth

er/Sp

ecial P

rod

ucts

Culidish with Shieltronics Technology

Twist Top Lidded Jars

Promotional Drinking Cups“C2D Series”

ST Series“Twist-off” lid


88x88 mm

Culidish250 250ml 57mm

176x88 mm

Culidish500 500ml 57mm

Diameter Item Number Capacity Height IML Lid Stock Product

91mm C2D 12oz SW 370ml 106mm

81mm C2D 12oz 355ml 126mm



110mm C2D 34oz 1005ml 184mm

110mm C2D 44oz 1300ml 224mm

Diameter Item Number Capacity Height IMLBarrier

IMLStock Product

95mm ST95-215 215ml 49mm

95mm ST95-280 280ml 63mm

109mm ST109-280 280ml 48mm

109mm ST109-335 335ml 58mm

109mm ST109-525 525ml 88mm

95mm ST95-D Lid

109mm ST109-D Lid


94 mm E155 375ml 70mm

E123 600ml 127mm

98 mm Twist Lock Lid

E123 (600ml) | C2D 22oz (650ml)



Tamp

er E

vide

nt

Th

erm

ofo

rme

d C

on

taine

rsStan

dard

Co

ntain

ers

Spe

cta Vis

Round

Shapes Available

Features

PP and Paperboard

Specta Vis

The ability to produce this style of pack in PP is unique to our manufacturer in Europe and can offer a really competitive printed cup with either a thermoformed or injection moulded lid. The PP material can offer a high gloss or even a transparent finish to stand out from other cups in the market. All cups and lids are made to order.

The whole range can be offered in food grade coated paperboard if this is the preferred material for the application.


4140

400ml 750ml 900ml

With In Mould Label

43

Spe

cta Vis

43

Material

Diameter Item Number Capacity Height Decoration PPPaper Board

PET

68mm

INN68-100 100ml 60mm

INN68-125 125ml 70mm

INN68-D-SP Moulded Lid with Spoon

86mmINN86-230 125ml 46mm

INN86-D-TF Moulded Lid with Spoon

90mm OR90-230 230ml

OR90-D-TF Thermoformed Lid

95mm OR95-430 430ml 95mm

OR95-D Moulded Lid

97mm

OR97-500 500ml 101mm

OR97-600 600ml 120mm

OR97-D-SVis Specta Vis Lid


111mmOR111-470 470ml 69mm


120mm

OR120-960 960ml 122mm

OR120-D-IML Injection Moulded Lid


125mmOR125-550 500ml


145mmOR145-750 750ml 68mm


154mmOR154-1250 1250ml 94mm


160mmOR160-1750 1750ml 122mm


170mmOR170-2500 2500ml 160mm


Fold Top Pack Material

Diameter Item Number Capacity Height Decoration PPPaper Board

PET

125mmSFLT750 750ml 68mm

SFLT1000 1000ml 92mm

42

Round

Specta Vis

Spe

cta Vis

43

SV1000ml | INN68-125ml | SV2500ml | SV500ml

With Offset Print

Fold top pack


Tamp

er E

vide

nt

Listed in this catalogue are the just some of the more popular ranges of thermoformed packs which Innavisions offer. The containers and lids are formed in different materials depending upon the particular tooling and hence the material type is listed in the catalogue for reference.

Thermoformed packs are generally lighter weight packs compared to injection moulded and can be a cost effective alternative for certain applications.

Thermoformed Containers

Round Square Rectangular Oval Specials

Shapes Available

Features

Formed in PP, PET or PS

Th

erm

ofo

rme

d C

on

taine

rs

4544

400ml 750ml 900ml

With In Mould Label

46

C

on

taine

rsT

he

rmo

form

ed

Co

ntain

ers

Thermoformed ContainersDiameter Item Number Material Capacity Height

Film Sealable

Stock Product

70mm

100-50 PS 50ml 25mm

100-80 PS 80ml 40mm

100-100 PS 100ml 49mm

100-125 PS 125ml 59mm

100-D PS Standard Lid

101mm

169-150 PS 150ml 29mm

169-200 PS 200ml 35mm

169-250 PS 250ml 48mm

169-500 PS 500ml 97mm

169-D PS Overlid

101mm

560-125 PP 125ml 30mm

560-200 PP 200ml 36mm

560-250 PS 250ml 48mm

560-300 PP 300ml 59mm

560-400 PP 400ml 81mm

560-500 PP 500ml 104mm

560-D PP Standard Lid

110mm

110-32 PET 200ml 32mm

110-45 PET 275ml 45mm

110-60 PET 355ml 60mm

110-78 PET 445ml 78mm

110-OD PET Overlid-Lid

115mm

580-350 PP 350ml 51mm

580-400 PP 400ml 57mm

580-500 PP 500ml 74mm

580-600 PP 600ml 82mm

580-800 PP 800ml 120mm

580-D PP Standard Lid

Oval-Rectangular

Diameter Item Number Material Capacity Height Film

SealableStock Product

118x88 mm

Take-it 118-30 PP 175ml 30mm




Take-it 118-OD PET Overlid

Take-it 118-OD-SP PET Overlid with spork



138x121 mm


Take-it 138-OD-SP PET Overlid with Spork



158x120 mm



Take-it 158-SP PET Overlid with Spork

47

560-300ml | 100-50ml | 110-60ml | 100-125ml


Tamp

er E

vide

nt

Th

erm

ofo

rme

d C

on

taine

rsStan

dard

Co

ntain

ers

Spe

cta Vis

Oth

er/Sp

ecial P

rod

ucts

All trays listed here, either injection moulded or thermoformed, are manufactured in PP and are therefore suitable for hot filling and microwaving. The injection moulded range are more robust and are generally slightly heavier gauge. In addition they generally have smooth straight walls whereas thermoformed trays have ridged walls for added strength.

Not all trays are available as stock items, and this does vary from time to time, so it is advisable to check leadtimes.


Injection Moulded or Thermoformed PPFilm Sealable Trays

Film Se

alable

Trays

Round Square Rectangular Oval Specials

Shapes Available

Features

4948

Film Se

aled

5150

Injection Moulded Film Sealable PP TraysRectangle Trays

Dimensions Item Number Capacity Height Moulded Lid Thermoformed Lid In Stock

135x92 mm

1309-31 215ml 31mm

1309-43 368ml 43mm

1309-75 540ml 75mm

145x107 mm

1410-25 250ml 25mm

1410-30 300ml 30mm

1410-35 350ml 35mm

1410-43 425ml 43mm

147x108 mm

1510-50 475ml 50mm

1510-60 575ml 60mm

165x105 mm

1610-25 320ml 25mm

1610-52 625ml 52mm

1610-60 730ml 60mm

164x123 mm

1612-25 375ml 25mm

1612-37 500ml 37mm

1612-46 625ml 46mm

1612-52 750ml 52mm

1612-80 1000ml 80mm

170x125 mm

1712-50 650ml 50mm

1712-60 750ml 60mm

175x175 mm

1717-35 800ml 35mm

1717-65 1500ml 65mm

1717-80 1850ml 80mm

180x130 mm

1813-78 1320ml 78mm

188x137 mm

1814-35 615ml 35mm

1814-45 775ml 45mm

1814-53 900ml 53mm

1814-68 1102ml 68mm

196x100 mm

1910-34 380ml 34mm

1910-50 575ml 50mm

200x103 mm

2010-37 475ml 37mm

208x146 mm

2014-25 525ml 25mm

2014-35 750ml 35mm

2014-40 850ml 40mm

2014-48 1000ml 48mm

2014-54 1125ml 54mm

2014-74 1590ml 74mm

215x147 mm

2114-73 1560ml 73mm

2114-83 1860ml 83mm

220x100 mm

2210-35 490ml 35mm

2210-35-2C 220/220ml 35mm

2210-50 700ml 50mm

2210-65-2C 425/425ml 65mm

51

Dimensions Item Number Capacity Height Moulded Lid Thermoformed Lid In Stock

225x179 mm

2318-30 919ml 30mm •2318 33-2C 429/520ml 33ml •

2318-42 1274ml 42mm •2318 45-3C 579/341/263ml 45mm •

2318-50 1503ml 50mm •2318-60 1781ml 60mm •2318-80 2312ml 80mm •

230x146 mm

2314-35 705ml 35mm •2314- 55 1000ml 55mm •2314-80 1717ml 80mm •

264x165 mm

2616-46 1450ml 46mm

2616-64 2100ml 64mm

2616-77 2350ml 77mm

274x148 mm

2714-73 2200ml 73mm

309x240 mm

3124-22 1200ml 22mm

3124-43 2400ml 43mm

3124-50 2800ml 50mm

3124-60 3300ml 60mm

3124-71 4000ml 71mm

3124-88 5000ml 88mm

325x265 mm

3226-50 3000ml 50mm

3226-88 5200ml 88mm

3226-100 5800ml 100mm

403x281 mm

4028-70 5000ml 70mm

Inje

ction

Mo

uld

ed

Film Se

alable

Trays


52

Thermoformed Film Sealable PP Trays

Dimensions Item Number Capacity Height Thermoformed Lid In Stock

145x145 mm

ES1414-40 580ml 40mm

ES1414-50 715ml 50mm

178x138 mm

ES1713 -40 673ml 40mm

ES1713-55 905ml 55mm

187x137 mm

ES1813-14 259ml 14mm

ES1813-25 443ml 25mm

ES1813-37 654ml 37mm

ES1813-50 862ml 50mm

ES1813-63 1061ml 63mm

ES1813-83 1341ml 83mm

190x144 mm

ES1914-25 490ml 25mm

ES1914-40 778ml 40mm

ES1914-43 826ml 43mm

ES1914-50 956ml 50mm

ES1914-63 1197ml 63mm

ES1914-65 1232ml 65mm

ES1914-75 1403ml 75mm

ES1914-80 1483ml 80mm

205x160 mm

ES2016-25 590ml 25mm

ES2016-37 861ml 37mm

ES2016-40 927ml 40mm

ES2016-50 1135ml 50mm

ES2016-60 1346ml 60mm

ES2016-80 1725ml 80mm

ES2016-100 2225ml 100mm

227x178 mm

ES2217-10 303ml 10mm

ES2217-30 921ml 30mm

ES2217-40 1212ml 40mm

ES2217-50 1496ml 50mm

ES2217-60 1770ml 60mm

ES2217-80 2282ml 80mm

ES2217-90 2533ml 90mm

ES2217-100 2772ml 100mm

230x145 mm

ES2314-10 202ml 10mm

ES2314-30 722ml 30mm

ES2314-40 955ml 40mm

ES2314-50 1177ml 50mm

ES2314-60 1390ml 60mm

ES2314-80 1784ml 80mm

260x177 mm

ES2617-40 1376ml 40mm

ES2617-50 1699ml 50mm

ES2617-60 2014ml 60mm

ES2617-75 2470ml 75mm

ES2617-100 3167ml 100mm

Dimensions Item Number Capacity Height Thermoformed Lid In Stock

275x88 mm

ES2708-50 770ml 50 mm

ES2708-65 971ml 65mm

ES2708-75 1148ml 75mm

275x175 mm

ES2717-32 1157ml 32mm

ES2717-40 1437ml 40mm

ES2717-50 1774ml 50mm

ES2717-63 2199ml 63mm

ES2717-75 2574ml 75mm

ES2717-80 2726ml 80mm

ES2717-110 3590ml 110mm

309x242 mm

ES3124-50 2796ml 50mm

ES3124-60 3331ml 60mm

ES3124-70 3854ml 70mm

ES3124-90 4875ml 90mm

ES3124-100 5366ml 100mm

325x265 mm

ES3226-40 2574ml 40mm

ES3226-50 3201ml 50mm

ES3226-60 3815ml 60mm

ES3226-80 5008ml 80mm

ES3226-100 6164ml 100mm

Dimensions Item Number Capacity Height In Stock

312x242 mm

Deca 3124-22 1211ml 22mm

Deca 3124-30 1679ml 30mm

Deca 3124-43 2425ml 43mm

Deca 3124-50 2818ml 50mm

Deca 3124-60 3371ml 60mm

Deca 3124-75 4178ml 75mm

Deca 3124-85 4703ml 85mm

Deca 3124-92 5064ml 92mm

Deca 3124-100 5469ml 100mm

Deca 3124-115 6211ml 115mm

53

Thermoformed Film Sealable PET Trays

Th

erm

ofo

rme

dFilm

Sealab

le Trays



To use our interactive catalogue visit our website www.innavisions.com

Sketched a great idea?Get in touch we’ll make this happen

54

RoundFilm Sealed

54

Ovenable Film Sealable CPET Trays

Innavisions can offer a very wide and extensive range of film sealable trays which are thermoformed in a black CPET material, making them suitable for use in conventional ovens as well as microwaves. Others colours can be produced subject to a minimum order quantity. Many of the sizes available are also also available in transparent PP or APET.

The range is too large to list here, but the limits of the current ranges are shown. Please contact Innavisions for detailed tray sizes.

Rectangular RangeItem Dimensions Capacity

Smallest size99x74mm

100ml

Largest size325x265

mm5000ml

Round RangeItem Dimensions Capacity

Smallest size88mm

Dia140ml

Largest size278mm

Dia2500ml

Oval RangeItem Dimensions Capacity

Smallest size174x106

mm200ml

Largest size380x280

mm2800ml


Innavisions Ltd Leigh, Worcester, WR6 5LA Tel: 01886 … 2015 Brochure V10.2.pdf · Leigh,...

Documents

Transcript of Innavisions Ltd Leigh, Worcester, WR6 5LA Tel: 01886 … 2015 Brochure V10.2.pdf · Leigh,...