HYDROGEN & FUEL CELLS COMING OF AGE€¦ · HYDROGEN & FUEL CELLS COMING OF AGE Guide to Exhibitors...
12
HYDROGEN & FUEL CELLS COMING OF AGE Guide to Exhibitors # CCSHFC2020
Transcript of HYDROGEN & FUEL CELLS COMING OF AGE€¦ · HYDROGEN & FUEL CELLS COMING OF AGE Guide to Exhibitors...
HYDROGEN & FUEL CELLS
COMING OF AGE
Guide to Exhibitors
# CCSHFC2020
The use of hydrogen gas as a source for power generation, commercial and industrial heating, and propulsion is growing rapidly. Containment and delivery of gaseous hydrogen for these applications can be very challenging. Gaseous hydrogen can readily diffuse into/through metals and polymers causing degradation. Swagelok products are already used extensively in hydrogen applications and we have built up considerable experience in ensuring correct product selection for leak tight connections and certified to meet the needs of this heavily regulated industry.
We supply over 7000 products and services including Fittings, Filters, Valves, Hose, Tubing, Regulators, Welding Systems, Measurement Devices Training, Advisory Services, Equipment, Custom Fabrications and much more.
If high quality fluid systems are vital to your business or to process operation, operating safety, or environmental compliance, our professionals can help.
Bronkhorst® offers:
¤ Mass Flow Controllers for gases, e.g. for the control of Hydrogen and Oxygen in fuel cell testbeds, as well as high pressure H2 measurement – up to 700bar.
¤ Accurate and compact Mass Flow Controllers for liquids, e.g. for feeding Methanol to a DMFC (Direct Methanol Fuel Cell).
¤ Coriolis type mass flow meters for precise and fast measurement of reactant or exhaust gas flow, independent of gas composition or humidity.
¤ Flexible and accurate humidification of the air supply to a fuel stack, using a CEM evaporation system, e.g. in Solid Oxide Fuel Cells (SOFC).
¤ Precise and reliable electronic (differential) pressure controllers, e.g. for stabilizing the pressure in the fuel cell against change of flow rate and maintaining a constant pressure difference across the membrane.
At Fuel Cell Systems Ltd we design, source and integrate bespoke fuel cell solutions for customers. We understand the products available globally and recommend solutions based on our customers’ power needs. Additionally, we offer hydrogen refuelling solutions which have been utilized to support a range of transport needs including cars, motor scooters, trains and aircraft.
HyTruck, our mobile refuelling vehicle, is in constant use for a variety of projects, providing refuelling for hydrogen vehicles across the UK and Europe. We are currently working with ZeroAvia and EMEC to provide a hydrogen refuelling service for the HyFlyer project, testing a zero-emission, hydrogen fuelled aircraft in the UK. We have also provided the refuelling for Hydroflex, a fuel cell powered passenger train being trialled at the University of Birmingham.
The Mini Hydrogen Dispenser from Fuel Cell Systems Ltd - a “jerry can” for hydrogen vehicles, is in use by the AA, in their prototype alternative fuels vehicle. It provides enough hydrogen fuel for an extra 30-50 miles and enables a stranded vehicle to reach the nearest static fuel station.
Swagelok Manchester
Bronkhorst UK Limited
Fuel Cell Systems Ltd
1
2
3
Stand
Stand
Stand
[email protected] manchester.swagelok.com
www.bronkhorst.co.uk
[email protected] www.fuelcellsystems.co.uk
Marks & Clerk is one of the world’s leading IP firms and its UK operation constitutes one of the largest firm of patent and trademark attorneys in the country. As part of a global network, it has unrivalled wealth and depth of expertise to ensure that clients are advised on how best to obtain and protect their intellectual property, and how to allow it to work for them. If you are investing in R&D or if people buy your products because of their innovative features, we can help you to protect your IP, attract investment and monetise your innovation internationally.
The firm’s patent attorneys operate across all sectors including hydrogen and fuel cell technology, batteries, and automotive. Its client base is diverse, ranging from the latest ventures to well-known multinational corporations.
Our large and experienced trademark team advises a wide range of international and domestic clients, including a number of famous brands.
Luxfer is world’s largest manufacturer of high-pressure aluminium and composite gas cylinders for a wide and growing variety of application – such as life support, alternative fuel, medical, industrial, beverage, fire extinguisher, aerospace, inflation scuba and performance racing.
We operate facilities in the United States, the UK, Canada, China and India. And with more than 50 million Luxfer cylinders in service we pride ourselves on an exemplary record for dependable service and safety.
Luxfer’s G-StorTM H2 products are the leading line of lightweight high-pressure hydrogen-storage cylinders used by a number of the world’s largest OEMs that design, develop and manufacture state-of-the-art compressed hydrogen-storage systems for fuel-cell and internal-combustion engines.
Intelligent Energy is focused on the development and manufacture of its Proton Exchange Membrane (PEM) fuel cell products for customers in the automotive, aerospace, generator, telecoms, materials handling and unmanned aerial vehicle (UAV) sectors. Intelligent Energy is built on 30 years of PEM fuel cell development. Following acquisition by Meditor Energy, part of the Meditor Group, in October 2017 Meditor has accelerated investment to facilitate further development and commercialisation of the technology and expansion of the product offering. The company is headquartered and manufactures in Loughborough in the UK, with additional offices and representation in the US, Japan, China and South Korea.
Marks and Clerk
Luxfer Gas Cylinders
Intelligent Energy
4
5
6
Stand
Stand
Stand
Rebecca Lovell: [email protected] www.marks-clerk.com
www.luxfercylinders.com
www.intelligent-energy.com
NCE Solutions has a wealth of experience in the supply of many items for research and development equipment. These products include gas pressure regulators, valves, Hy-lok twin ferrule fittings, pipe fittings, flexible and ridged stainless steel tube, VA flow meters, vacuum hoses and flanges, pneumatic regulators and fittings, etc. We often help customers by offering machining services for specialist/bespoke parts, and we are always happy to talk over technical engineering remedies if required. We also offer bespoke kits of purpose made tube bends and panels if required. Please feel comfortable to ask us if you have any particular requirements, as we are always pleased to help.
Parker Hannifin is a Fortune 250 global leader in motion and control technologies. For over 100 years Parker has engineered the success of its customers in a wide range of diversified industrial and aerospace markets. Parker is ideally positioned to service the needs of the hydrogen market by developing new products for specific applications or transferring technologies from our expertise in other market sectors.
Our breadth of products can help customers to reduce vendor count on a global scale, in addition to providing local access through our large distributor network. Parker will be showcasing our new flexible thermoplastic hose assembly for hydrogen fuel dispensing, rated at 1000 bar, in addition to technologies such as filtration, sealing, tube connections, hoses and valves. Please visit our stand to have a chat about your project and application with our tech experts.
Established in 2000, Pressure Tech has built a solid reputation for designing and manufacturing high-quality ISO-9001 accredited pressure regulators for use on gas and liquid applications. Our business model ensures customers are quickly able to access the technical and design expertise required to offer collaboration on unique solutions for specific applications, resulting in products that provide accurate control with long-term reliability in service.
Based in the UK, we pride ourselves on our ability to work closely with our customers to ensure the exact pressure control solution is provided to meet their specific needs. From ultra-compact and lightweight regulators (down to 200g) to onboard vehicle regulators and high-pressure refuelling solutions with fast fill times, our features include double ‘O’-rings, no wetted threads, and convenient access points for future servicing requirements. Our portfolio ensures we cover a wide range of applications on Hydrogen service in a rapidly expanding market.
NCE Solutions
Parker Hannifin Ltd
Pressure Tech Ltd
7
9
8
Stand
Stand
Stand
www.ncesolutions.co.uk
[email protected] www.parker.com/uk
[email protected] www.pressure-tech.com
Hypermotive is an engineering services and manufacturing business operating across 3 divisions:
¤ Hypermotive Fuel Cell (FC) Systems
¤ Hypermotive Electric Vehicle (EV) Systems
¤ Hypermotive Wiring Systems
Hypermotive’s Fuel Cell Systems division have a highly experienced team of fuel cell engineers with a particularly deep understanding of the design and integration of both PEM and SOFC fuel cell technologies. Hypermotive leverage strong technical relationships with a number of the global fuel cell manufacturers. Their fuel cell engineering capability includes stack and system design, fuel cell controls and health monitoring, air, fuel and thermal management and the electrical and mechanical integration of fuel cells into applications.
Hypermotive’s broader engineering capability includes; electrical/electronic hardware design, software/controls, LV/HV harnessing and low volume tier 1 manufacturing.
Hypermotive are currently working on fuel cell and electric vehicle programmes for automotive, commercial vehicle (truck/bus), off-highway, marine, rail, military, aerospace and stationary power applications.
IMI Precision Engineering is a specialist engineering company providing fluid and motion control solutions across multiple industries. At IMI we’re dedicated to tackling the most challenging engineering problems and we believe that the challenges and barriers facing the development of the hydrogen economy are best overcome through open conversation and collaboration. Let’s create the future of Hydrogen together!
Hydrotechnik UK is an established test and measurement equipment manufacturer and supplier to multiple industrial markets. We have recently released a portfolio of products to support the test, measurement and charging of devices using reliant upon Hydrogen. Our selection of pressure sensors have been specified from multiple Hydrogen related applications including; research and development and product testing.
Come speak to our friendly team to find out how our product portfolio can help you. We look forward to seeing you on Stand 12.
Hypermotive
IMI Precision Engineering
Hydrotechnik UK Ltd
10
11
12
Stand
Stand
Stand
[email protected] www.hyper-motive.com
[email protected] www.imi-precision.com
www.hydrotechnik.co.uk
Chesterfield Special Cylinders designs and manufactures Type 1 seamless steel high pressure gas storage solutions for the hydrogen sector. Safe, long-lasting and robust, CSC’s Type 1 hydrogen cylinders are designed and manufactured to the full range of industry standards and used for ground storage at refuelling stations in the UK and across Europe. They also have a long history of use on specially built trailers by gas majors globally.
As the world’s leading high-pressure cylinder manufacturer for over 100 years, CSC’s ground storage and trailer solutions (including ancillary piping and valves etc.) are recognised as the most robust and long-life solution for high pressure storage.
CSC’s design engineers work closely with customers to achieve the most appropriate and value-added solution, while the integrity management team co-authored the revalidation, testing and re-accreditation standards BS 8562 and EN 16753. Their inspection and test expertise ensure optimal lifelong performance.
Safe and cost-efficient type 4 storage and transportation solutions for hydrogen.
UMOE Advanced Composites (UAC) is the leading global supplier of large fibre glass type 4 pressure vessels and modules for containment, storage and transportation of hydrogen for land-based, marine and offshore applications.
Our mission is to improve our customers ’ profitability and eco-friendliness through use of fibre glass solutions, replacing traditional carbon fibre and steel products. Fibre glass materials are lightweight with non-corrosive properties. UAC pressure vessels have wide temperature tolerances (-40°C/+65°C), excellent fatigue properties and superior safety levels, compared to steel and carbon-fibre solutions.
Fibre glass pressure vessels are a low-cost alternative to carbon fibre cylinders. Working pressure up to 350 bar.
Main Benefits:
¤ Large gas volumes
¤ All kind of container configurations (20-45ft)
¤ Extended service lifetime 25+ years
¤ Reduced lifecycle cost
The Enterprise Europe Network helps businesses innovate and grow on an international scale. It is the world’s largest support network for small and medium-sized enterprises (SMEs) with international ambitions.
The Network is active in more than 60 countries worldwide. It brings together 3,000 experts from more than 600 member organisations – all renowned for their excellence in business support.
The Network’s international business experts have the experience and resources to help your business grow. Whatever your business, we can advise on the best market opportunities to help you expand internationally. The Network offers advisory services and innovation support.
We can help your business find the right international partners to grow and expand abroad.
The Network has the reach and expertise to find the right partner(s) for you to, for example:
¤ Manufacture or distribute your products
¤ Access new markets
¤ Find the technology you need to drive innovation in your business cooperate in research and development projects
Chesterfield Special Cylinders
UMOE Advanced Composites AS
Enterprise Europe Network
13
14
15
Stand
Stand
Stand
www.chesterfieldcylinders.com
[email protected] www.uac.no
Clean Power Hydrogen (CPH2) has advanced the development of hydrogen as a green fuel by demonstrating a new form of production.
CPH2 has conceived, patented and developed an efficient, cost-effective and reliable means of producing hydrogen, lowering the barriers to wide-scale adoption and accelerating the progress towards a zero-carbon future.
The technology includes a Membrane-Free Electrolyser™ (MFE) in combination with cryogenic separation to deliver pure hydrogen as a compressed gas.
The system is simple, safe and sustainable, made of non-exotic materials, providing a cost-effective alternative to both alkaline and PEM electrolysis. The technology may be deployed at any scale and into a wide variety of applications. When supplied by renewable electricity, the technology delivers green hydrogen.
Founded in 2007, Hybrid Air Vehicles is the company behind the innovative Airlander hybrid aircraft. Airlander can take off and land from virtually any flat surface and offers a powerful combination of flexibility, persistence, payload capacity, and efficiency. Suitable for roles from surveillance and border patrol to search & rescue and expeditionary tourism, Airlander is an aircraft that encourages customers to Rethink the Skies and consider new approaches to solving some of the toughest challenges facing aerospace today.
Dependable up to 500 bar – anywhere, anytime, anygas.
Sauer Compressors are internationally known as a leading supplier of high pressure compressed air & gas solutions.
For over 130 years we have developed and manufactured state-of-the-art high pressure compressors ranging from 15 – 500 bar, supplying our products to the Shipping, Naval, Industrial and Oil & Gas markets.
Sauer are proud to supply & support HAUG Sauer Compressors, our centre of excellence for oil free compressors which are manufactured from St. Gallen in Switzerland. HAUG compressors are the experts in state of the art gas-tight piston compressors for air and a variety of gases in the 0.5 – 110 kW output range.
The team at Sauer Compressors UK are on hand to discuss any projects you may have to find you the best solution, we can support you with new sales, aftersales support, overhaul & testing, customised solutions, spare parts, and technical advice.
Clean Power Hydrogen
Hybrid Air Vehicles
Sauer Compressors
16
17
18
Stand
Stand
Stand
[email protected] www.hybridairvehicles.com
[email protected] www.sauercompressors.com
Kiwa Gastec is a practical energy management and low carbon consultancy. We are recognised internationally for our technical expertise and knowledge of energy in most of its forms: solid fuel, gas, oil and renewable (hydrogen, biomass, solar, wind, heat pumps). We also specialise in fuel cell power, mCHP and vehicle refuelling systems.
We test, inspect, train, certify and consult for multinationals, manufacturers, government bodies, SMEs, trade bodies and hospitals.
Our hydrogen training course ‘Hydrogen and the Natural Gas Network’ is for professionals working in the gas supply and appliance industries; we are currently developing a hydrogen course for installers of domestic gas appliances.
FTI are a premier supplier of Ham-Let Valves & Fittings, Gas Arc Regulators, Sandvik Stainless Steel Tube, Flexible Metal hoses and other instrumentation products suitable for the Hydrogen Industry The Ham-Let products are compliant with EC-79 for Hydrogen use.
As well as being a product distributor we also offer our own manufacturing (CNC Machining), Sub-Assembly and Panel Building.
We pride ourselves on offering excellent value for money and great technical and customer support.
Come and say hello – on our stand will be Karl from FTI, Julian from Ham-Let and Simon from Gas Arc.
The Sustainable Hydrogen Centre for Doctoral Training is a new collaboration between the Universities of Nottingham, Loughborough, Birmingham and Ulster. The centre is supported by the Engineering and Sciences Research Council and industrial partners and is seeking to train PhDs and develop hydrogen energy innovation leaders to successfully transition the UK towards a low-carbon economy.
FTI Ltd
SusHy CDT University of Nottingham
Kiwa
20
19
21
Stand
Stand
Stand
[email protected] www.ftipv.com
www.sustainablehydrogen-cdt.ac.uk
[email protected] www.kiwa.co.uk/hydrogen
ATETA is the business support and outreach of the University of Birmingham’s Birmingham Energy Institute. Through ATETA, Small and Medium Sized Enterprises across Greater Birmingham and Solihull, Black Country, Coventry & Warwickshire, and Worcestershire can access R&D support and access to laboratory and other test facilities.We also offer support for early stage companies, access to overseas market and energy technology workshops.Technology areas where we can support your business include; Low Carbon Power¤ Distributed Energy System Design and Grid ¤ EV Charging Integration¤ Power Systems and Smart Grid EconomicThermal Energy Technology¤ Low Carbon Heating and Cooling¤ Thermal Materials – Development and Application¤ Heat Recovery and System Efficiency
Come and donate your energy and watch in real time as we store that energy in the form of hydrogen gas. Explore the intricacies of energy storage via a water splitting process and then light your very own micro flame to experience a carbon neutral heat source as a safe and stable flame.
As the world turns towards 100% renewable energy, there are significant issues with balancing supply and demand. You need energy when you need it and not just when the wind is blowing or the sun is shining. We, therefore, need to buffer the supply and demand. Energy storage is tricky and inefficient.
Our solution at Swansea University in the Sustainable Hydrogen Innovation and Technology labs is to use Hydrogen as the Universal Energy carrier.
At the UK Hydrogen and Fuel Cell Association (UK HFCA), our goal is to make the UK the best possible place for hydrogen and fuel cells across the full range of applications and opportunities. We work with the political community and national policy makers to enhance the prospects for these clean energy solutions. As we transition to net zero, the need for the industry to come together and convey a joint message to Government and other stakeholders has never been stronger.
Our members include the leading UK hydrogen and fuel cell companies as well as organisations from the academic community and a range of other stakeholders with an interest in these clean energy solutions and the associated elements of the supply chain.
University of Birmingham
Swansea University The Hydrogen Bike
UK HFCA
FOYER
FOYER
FOYER
In the
In the
In the
www.birmingham.ac.uk/ATETA
www.thehydrogenbike.uk
[email protected] www.ukhfca.co.uk
Green Mobility¤ Fuel Cell and Hydrogen Technologies¤ Clean Vehicle Technologies
¤ Energy from Waste and Alternative Fuels
Over twenty years ago, we introduced hybrid technology with the pioneering Prius. Thanks to its flexible hybrid architecture we were able to embark on another journey of innovation with Mirai. Toyota’s Fuel Cell Electric Car runs on inexhaustible hydrogen gas which can be made entirely from renewables and it only emits water, making less impact on our planet but is guaranteed to leave an impression on you, every journey.
Potter Clarkson creates value from your innovation. We bring vision and clarity of thought to guide you through the complexities of intellectual property for business. As consultants and experts in IP law, we help you understand, create, protect and defend the commercial value of your innovations anywhere in the world.
All-New NEXO belongs to a future in which cars exist in harmony with the environment – a future where comfort, control and convenience do not weigh heavy on drivers’ consciences. Available today, but belonging to the world of tomorrow. A world that we’re actively pursuing by adding 18 new electrified models to our range by 2025. Powered by a second-generation emission-free hydrogen fuel cell system, you can breathe easy with All-New NEXO.
Potter Clarkson
Hyundai Nexo
Toyota Mirai
ATRIUM
ATRIUM
FOYER
In the
In the
In the
www.potterclarkson.com
hyundai.co.uk
toyota.co.uk
ATRIUMIn the
Climate Change Solutions would like to thank the above sponsors for their valuable support in delivering the 16th UK Hydrogen and Fuel Cell Conference
Conference Sponsors
Workshop Sponsors
As Microcab moves into its commercialisation phase, we introduce the newest addition to the Microcab fleet, the Vianova. This lightweight city car showcases our latest vehicle designs on the versatile H2EV platform and features our “state of the art” fuel cell and powertrain technology.
The Microcab Vianova microcab.co.uk
Conference Organiser:
Climate Change SolutionsThe TechnoCentre, Coventry University Technology Park, Puma Way, Coventry, CV1 2TT
www.climate-change-solutions.co.uk
Climate Change Solutions (CCS) was set up to encourage the move to a low carbon future. CCS has been particularly involved with the Hydrogen and Fuel Cell industry , promoting this technology
for over 10 years to encourage it’s use in buildings, transport and energy storage.
