HDI 1029-PLL8 HDI 1029-PLL16 HDI 1029-PLL16H - .The HDI 1029 is a multi-channel stethoset receiver

HDI 1029-PLL8 HDI 1029-PLL16 HDI 1029-PLL16H - .The HDI 1029 is a multi-channel stethoset receiver
HDI 1029-PLL8 HDI 1029-PLL16 HDI 1029-PLL16H - .The HDI 1029 is a multi-channel stethoset receiver
download HDI 1029-PLL8 HDI 1029-PLL16 HDI 1029-PLL16H - .The HDI 1029 is a multi-channel stethoset receiver

of 2

  • date post

    28-Aug-2018
  • Category

    Documents

  • view

    233
  • download

    0

Embed Size (px)

Transcript of HDI 1029-PLL8 HDI 1029-PLL16 HDI 1029-PLL16H - .The HDI 1029 is a multi-channel stethoset receiver

  • FEATURESMulti-channel narrow-band receiver

    Extremely lightweight, approx. 60 g only

    including battery packBattery pack can be recharged while

    remaining in the receiverEnergy-saving circuitry

    Squelch

    HDI 1029-PPL8: 8 channel (Ch. 0 Ch. 7)

    HDI 1029-PPL16: 16 channel (Ch. 0 Ch. 15)

    HDI 1029-PPL16H: 16 channel

    (Ch. 16 Ch. 31)

    ARCHITECTSSPECIFICATIONSThe multi-channel infrared stethoset receiver shall be suitable for narrow-band applications and shall be available with 8 or 16 switchable channels. The receiver shall be easy to use and ext-remely lightweight. It shall be fitted with a squelch and an energy-saving circuitry.The receiver shall be capable of receiving on carrier frequencies ranging from 55 695 kHz. Power shall be supplied by a 2.5 V recharge-able battery pack with an operating time of 10 hours. Weight including the battery pack shall be 60 grams (2.12 oz). The battery pack shall be the Sennheiser BA 90, the 8-channel receiver shall be the Sennheiser HDI 1029-PLL8 (K 0 - K 7), the 16-channel receiver shall be the Sennheiser HDI 1029-PLL16 (K 0 K 15) or HDI 1029-PLL16H (K 16 K 31).

    The HDI 1029 is a multi-channel stethoset receiver for narrow-band applications. It is very easy to use and comfortable to wear due to its light weight. It is powered by an environmentally friendly rechargeable battery pack. The HDI 1029 is fitted with a squelch and energy-saving circuitry.

    TECHNICAL DATAModulation ...............................................................FMCarrier frequencies ..................................................55 695 kHzPower supply............................................................BA 90, 2.5 V, 170 mAhOperating time ........................................................10 hWeight incl. Accu .....................................................60 g (2.12 oz)

    HDI 1029-PLL8HDI 1029-PLL16HDI 1029-PLL16H multi-channel stethoset receiver

  • PRODUCT VARIANTSHDI 1029-PLL8 Art. No. 03676HDI 1029-PLL16 Art. No. 03659HDI 1029-PLL16-H Art. No. 04631

    RECOMMENDED ACCESSORIESBA 90 Rechargeable battery pack Art. No. 003261

    Charging unitsfor BA 90 battery packsL 92-10: simultaneous charging of 10 or 20 BA 90 battery packs. The NT 92 plugin mains unit should be ordered separately Art. No. 03355

    L 92-20: simultaneous charging of 10 or 20 BA 90 battery packs. The NT 92 plug-in mains unit should be ordered separately Art. No. 03356

    for HDI 1029 receiversL 1030-10: for 10 receivers. (Use the NT 92 mains unit for up to two L1030, use the NT 2013 mains unit for up to 5 L1039) Art. No. 04024

    L 29-50-2: case for 50 receivers.Please order the required NT 2013 plug-in mains unit separately. Art. No. 04310

    Plug-in main units for powering the L 92-20, L 92-10, L 151-10 and up to two L 1030-10 charging unitsNT 92 (EU version) Art. No. 03357NT 92-120 (120 V version) Art. No. 03358NT 92-UK (UK version) Art. No. 03359NT 2013 -0 (EU version) Art. No 03433NT 2013-120 (120 V version) Art. No 03434

    DIMENSIONS

    Sennheiser electronic GmbH & Co. KGAm Labor 1, 30900 Wedemark, Germanywww.sennheiser.com

    10/1

    2 Se

    nnhe

    iser

    is a

    reg

    iste

    red

    trad

    emar

    k of

    Sen

    nhei

    ser

    elec

    tron

    ic G

    mbH

    & C

    o. K

    G.

    ww

    w.s

    ennh

    eise

    r.co

    m.

    Copy

    righ

    t

    10/

    2012

    . All

    righ

    ts r

    eser

    ved.

    Err

    ors

    and

    omis

    sion

    s ex

    cept

    ed.

    HDI 1029-PLL8, HDI 1029-PLL16, HDI 1029-PLL16H multi-channel stethoset receiver

    HDI 1029Infrared Wireless Systems | Receivers

    Featuresj Multi-channel narrow-band receiverj Extremely lightweight, only appx. 60 g including accupackj Accupack can be recharged while remaining in the receiverj Energy-saving circuitryj Squelchj Delivery includes: 1 x HDI 1029 multi-channel stethoset receiver

    1 x BA 90 accupack

    General DescriptionThe HDI 1029 is a multi-channel stethoset receiver for narrow-band applications. It is very easy to use and comfortable to wear due to its light weight. It is powered by an environmentally friendly rechargeable accupack. The HDI 1029 is fitted with a squelch and energy-saving circuitry.

    Technical DataModulation ................................................. narrow-band FMCarrier frequencies ......................................... 55 695 kHzChannels (HDI 1029 PLL 16) .....ch. 0 ch. 15, switchableAF frequency response ................................. 50 8,000 HzTHD (electrical) ..........................................................typ. 2 %AF signal-to-noise ratio ............................................> 52 dBMax. SPL .............................................................appx. 110 dBPower supply ..................BA 90 accupack, 2.5 V, 170 mAhOperating time ..................................................appx. 10 hrsWeight ...................................................appx. 60 g (2.12 oz)

    including accupack

    Recommended Accessoriesj BA 90 accupack Cat. No. 003261j L 29-50-2 charging case for 50 receivers Cat. No. 004310j L 92-10 charging unit for 10 BA 90 Cat. No. 003355j L 92-20 charging unit for 20 BA 90 Cat. No. 003356j L 1030-10 charging unit for 10 receivers Cat. No. 004024j Plug-in mains unit for one L 92 or up to two L 1030

    NT 92 European version Cat. No. 003357 NT 92-120 USA version Cat. No. 003358 NT 92-UK UK version Cat. No. 003359

    j Plug-in mains unit for L 29-50-2 charging case or up to five L 1030-10 NT 2013 European version Cat. No. 003433 NT 2013-120 USA version Cat. No. 003434 NG 2013-UK UK version Cat. No. 054332

    Dimensions of the HDI 1029

    135 mm (5.31)

    Product Variantsj HDI 1029 PLL 16: Multi-channel

    stethoset receiver, 16 switchable channels (ch. 0 ch. 15) Cat. No. 003659

    j HDI 1029 PLL 16 H: Multi-channel stethoset receiver, 16 switchable channels (ch. 16 ch. 31) Cat. No. 004631

    j HDI 1029 PLL 8: Multi-channel stethoset receiver, 8 switchable channels (ch. 0 ch. 7) Cat. No. 003676

    195 mm (7.68)

    HDI 1029Infrared Wireless Systems | Receivers

    The HDI 1029 is a multi-channel narrow-band stethoset receiver. Depending on the model, it can be switched between 8 or 16 channels. Due to this multi-channel design, it is ideally suitable for use at international conferences. The stethoset receiver is an economical alternative to the bodypack receiver with its external head-phone. Short events with a changing audience bring out the special advantages of this type of receiver: they can be quickly distributed and collected again as there is no cable to get entangled.

    The transducers of the HDI 1029 are situated directly behind the ear pads. The result-ing sound quality is clearly better than that of systems using pneumatic transmis-sion. Moreover, the stethoset design clearly attenuates ambient noise, values of up to 15 dB having been achieved. This attenuation for example increases the intelligi-bility of translations when the floor language is being reinforced at the same time. The operating controls of the HDI 1029 a combined on/off/volume control and a channel selector switch are located at the bottom of the receiver where they are protected against coffee splashes etc. After use, the receiver should always be switched off. The IR receiving diodes are located on the front of the receiver. Thus, the users always have good reception as long as the diodes do not face the body.

    The HDI 1029 has a built-in squelch. When the IR signal from the radiators becomes too weak, the receiver mutes the audio output in order to avoid loud hiss. During conference breaks, this muting circuit serves to save energy. The receiver switches to stand-by so that the BA 90 accupack is not discharged too quickly. The environ-mentally friendly BA 90 has a weight of only 8 g and allows an operating time of appx. 10 hrs with the HDI 1029. The various possibilities for recharging the BA 90 are decribed below.

    The silicone earpads of the HDI 1029 can easily be removed and cleaned. Never-theless, they are tightly attached to the headphones to prevent them slipping off accidentally.

    If you want to recharge several BA 90 at the same time, you should use the L 92-10 or L 92-20 charging unit for up to ten or up to twenty accupacks. The BA 90 are inserted into the units from both sides, and recharging is indicated by the LEDs on top of the charging unit.

    However, the best solution is to recharge the accupacks while they remain inserted in the receivers. The L 1030-10 charging unit can recharge up to ten complete receiv-ers. It is powered by the plug-in mains unit NT 92, which is suitable for up to two L 1030-10. For up to five cascaded units, you can use the NT 2013 or NG 2013-UK. The necessary plug-in mains units are not delivered with the charging units. Please order them separately in the version you require (European, UK and USA versions available).

    The L 29-50-2 charging and transport case makes storing and recharging still easier. The charging case can accommodate up to 50 HDI 1029, the accupacks remain in the receivers and recharging is timer-controlled. Power is supplied via an NT 2013 (or NG 2013-UK) plug-in mains unit which must be ordered separately. The BA 90 accu-packs cannot be overcharged, so they can remain in the charging units even when they have been fully recharged, which takes approximately 14 hrs. The charging unit in the L 29-50-2 automatically switches over to trickle charging after 14 hours.

    Controls of the HDI 1029

    1 Removable silicone earpads2 Two IR receiving diodes3 On/off/volume control4 Inserted BA