AXIAL FAN SERIES - my.amca.org Approved... · Our range of axial fan is fully adjustable blades and...

6

7

8

11

10

9

1 ~ 5The performances shown are for Standard units. Fans are tested in accordance to Method 1, BS 848 Part 1: 1980. Under this standard, test results are corrected to standard air density of 1.2kg/m3.

Any variation in individual fan performance due to manufacturing variations falls with Class B tolerances of the British Standard. Fan sound levels are given on Perfor-mance Curves together with Octave Band spectrum, based on in-duct method as specified in BS 848 Part 2.

ImpellerAerofoil blades are available in Three types of material. They are Glass Reinforced Nylon (GRN), Aluminium (AL) and Anti-static GRN (ASTAT).

GRN, Glass Reinforced NylonGlass reinforced Nylon 66 has greater strength and high temperature capability (-40˚C to +150˚C of non-radiant heat). Higher speeds are acceptable for standard impeller when GRN blades are fitted. Recommended maximum Tip Speed for GRN is 115m/sec.

Test Standard

AXIAL FAN SERIESADTA • ADTA-F

NICOTRA GEBHARDT SDN BHD certifies that the ADTA

Series and ADTA-F shown herein is licensed to bear the

AMCA Seal.

The ratings shown are based on tests and procedures

performed in accordance with AMCA Publication 211 and

AMCA Publication 311 and comply with the requirements

of the AMCA Certified Ratings Program.

AXIAL FAN ADTA / EN / OCTOBER / 2016

The performances shown are for Standard units. Fans are tested in accordance to Method 1, BS 848 Part 1: 1980. Under this standard, test results are corrected to standard air density of 1.2kg/m3.

Any variation in individual fan performance due to manufacturing variations falls with Class B tolerances of the British Standard. Fan sound levels are given on Perfor-mance Curves together with Octave Band spectrum, based on in-duct method as specified in BS 848 Part 2.

Aerofoil blades are available in Three types of material. They are Glass Reinforced Nylon (GRN), Aluminium (AL) and Anti-static GRN (ASTAT).

GRN, Glass Reinforced NylonGlass reinforced Nylon 66 has greater strength and high temperature capability (-40˚C to +150˚C of non-radiant heat). Higher speeds are acceptable for standard impeller when GRN blades are fitted. Recommended maximum Tip Speed for GRN is 115m/sec.

FEATURES

• High Efficiency

• Fully Adjustable Blade

• Versatile

• High Quality Material

• Interchangeable Components

• The Axial Impeller Is Balanced In Line ISO 1940, G2.5

• Robust Construction

• GRN and Pressure Die Cast Aluminium Material

• Anti-static GRN for Anti Spark Application

• Third Party Certification On BS EN 12101-3 For Smoke Spill Application

• Series ADTA is AMCA Certified For Air and Sound Performance.

The Nicotra Gebhardt axial fan provide wide range of air volume from 360 m3/hr to 216,000 m3/hr, at static pressure up to 1000 Pa of complete fan system with most diversified application. Remarkably high fan efficiencies are the direct result of rigor-ously developed aerodynamically profiled impeller blades and advanced manufacturing technique.

Introduction

1

All Nicotra Gebhardt axial impellers and fans are balanced to ISO Std No 1940, Edi-tion using balancing grade of G2.5 (Displacement Amplitude = 2.5 mm/s) in our factory.

Balancing

Our range of axial fan is fully adjustable blades and there are basically 6 hubs systems as shown below:

Our 250 and 400 hub are designed to be mounted with taper-lock bush 2517 of 42mm, 48mm, 55mm and 60mm diameter as optional feature.

The complete hub system for impeller 1400 and 1600 consists of side plate metal, center hub, aluminium blade, blade holder and taper lock bush.

Hub System

Hub Size110160230250400550

Number of Blades5 Blades5 & 10 Blades3, 6 & 12 Blades3, 6 & 12 Blades4, 8, 12 & 16 Blades4, 7 & 11 Blades

Basically, we have the following design of impellers:

Blades Design / Types

Casing Surface Finishing

Design Type

B

TC

Material

ALU

ALUALU

Hub System

110, 160, 230

250400

Hub Combination for Axial Fan

Thus, by this method, tube casing surface appeared to be wrinkle and provide betterproctection against chemical and wear.

All standard axial fan tube casing's surface are applied with paint - RAL 7030 bypowder coating method. Coating thickness is 60µm.

2

Long case axial casings are rolled from 2.0 mm to 5.0 mm mild steel. The standard double flanged L bracket mounting is provided, foot mounted support can be provided as optional. Tube casing come with standard view port, and the access door can be requested as option.

Electric Motor

Nicotra Gebhardt use standard three phase motors TEFC, foot mounted insulation in accordance with IEC standard EN 60034, Enclosure IP55, insulation Class “F”. Other medium temperatures, protection classes, two speed motor (poles switch) and etc as optional.

Computer selection

Our user-friendly fan selection software allows you to select the most suitable model to your needs. Performance data and fan curve will be generated by the state of art software.

3

Casing Overview Dimension

To select a contra-rotating axial, divide the static pressure by 2.5 and select as though it was a single stage unit. The kW figure is for one stage only and should be multiply by two to the system.

Air Flow Direction :B Flow

APPLICATIONNicotra Gebhardt ADTA are particularly suit-able for the extraction of stale air, for general ventilation, drying process and all those applications which require moving large volumes of air.

CONSTRUCTIONThe housing is made of heavy-gauge mild steel casing, seamless double flanges at both end. Powder coated bake enamel finishing (60 micron) or galvanized steel. High efficiency impeller made of adjustable pitch aerofoil blade; ALU type or GRN type. Foot mounting & Hot dip galvanized casing is available as an option.

WORKING TEMPERATURE-40˚C to 150˚C : GRN-40˚C to 200˚C : ALU

ADTA Series

MOTORThree-phase with type of “Totally Enclosed Fan Cooled” (TEFC), horizontal foot mounted Squirrel Cage Induction Motor, featured with class F insulation system with Class B tem-perature rise (80°C). Voltage supply includes 400V/50Hz, 400V/60Hz or 440V/60Hz. Motor Standards are comply with IEC 60034 or BS 4999. Other requirements upon demand basis.Motor are wired to an external terminal box with cable and through PVC or steel flexible conduit.

DIRECTION OF THE AIRThe standard air flow from the impeller to the motor (B), on demand the fans can be supplied with the direction from the motor to the impeller (A).

4

Casing Overview Dimension

To select a contra-rotating axial, divide the static pressure by 2.5 and select as though it was a single stage unit. The kW figure is for one stage only and should be multiply by two to the system.

Air performance ratings of the ADTA fans described by ADTA catalogue have been derived from performance tests made with installation type “D”, with ducted inlet and ducted outlet. These tests were carried out in accordance with AMCA standard 210-07 (Fig. 12, and Fig. 15). Ratings are referred to the standard air density.

Air Performance

Noise ratings are calculated starting from sound power level measurements made in accordance with the AMCA standard 300-08, (Fig. 2D and Fig. 3D). The test results keep into consideration the presence of the motor inside the fan.

Sound Power Level

NICOTRA GEBHARDT SDN BHD certifies that the ADTA Series and ADTA-F shown herein is licensed to bear the AMCA Seal.

The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.

5

APPLICATIONNicotra Gebhardt ADTA-F smoke spill axial fans are particularly designed for the removal of hot toxic smoke so as to remove the smoke at the escape passage and assist firefighters by providing better visibility. It also provide ventilation to the area during normal situation.

CONSTRUCTIONThe housing is made of heavy-gauge mild steel casing, seamless double flanges at both end. Powder coated bake enamel finishing or galvanized steel. High efficiency impeller made of adjustable pitch aerofoil blade pressure die cast Aluminium. Hot dip galvanized casing is available as option.

ADTA-F Series

MOTORHigh temperature resistance motor compliance to BS 7346 : Part2 : 1990 and EN 12101-3 : 2006 directive. Three phase with type of “Totally Enclosed Air Over” (TEAO), horizontal foot mounted Squirrel Cage Induction Motor, featured with class H insulation system with Class B temperature rise (80°C). Voltage supply includes 400V/50Hz, 400V/60Hz or 440V/60Hz. Motor Standards are comply with IEC 60034 or BS 4999. Other requirements upon demand basis.Motor are wired to an external terminal box with cable and through flexible conduit.

TESTINGADTA-F axial fans have been tested by the Warrington Fire Research which is UK’s largest Independent specialist in fire safety testing, consultancy and research. Its report are well accepted by specifying and regulatory authorities throughout the world.This series were tested in accordance to BS 7346 : Part 2 : 1990 Class B (250°C, 120 minutes) and equivalent to EN 12101-3 : 2006 (F200)

DIRECTION OF THE AIRThe standard air flow from the impeller to the motor (B), on demand the fans can be supplied with the direction from the motor to the impeller (A)

6

12

14

15

17

18

19

13

16

Aluminium, ALBlades are available in Aluminium LM6. Proven for use in emergency smoke and fume extract applications up to 400˚C. It is also suitable for continuous operation -40°C to +200°C. Maximum Tip Speed for AL blades is 100m/sec.

Anti-static BladesGRN Blades specially formulated to provide anti-static properties are available. The principle application for these blades is for installation which is categorised as “potentially explosive atmosphere” and where the risk of ignition of gas or dust vapours through a spark incident is a possibility.

These anti-static blades which are made with 20% glass filling (as standard) have a percentage of carbon black added to control the surface resistivity.

The anti-static blades have a slightly lower tensile strength than the normal GRN blades, this should not concern most applications, however we are recommending that the max continuous operating temperature in limited to -30 degC to 110 degC.

ADTA, ADTA-F with Hanger

ADTA, ADTA-F with Mounting Feet (optional)

ADTA, ADTA-F General Dimension

5

Due to a policy of continuous development and improvement the right is reserved to supply product which may differ from thoseillustrated and described in this publications.

Certified dimensions will be supplied on receipt of order

7

MODEL ØA ØB (PCD) ØC D N x Ø E F M x Ø G H I J P x Ø500 500 540 580 500 12 X 10 356 550 4 X 16 538 370 450 500 2 x 14 132560 560 605 660 500 12 X 10 356 611 4 X 16 538 402.5 460 560 2 x 14 132630 630 675 730 500 12 X 10 326 691 4 X 20 538 437.5 530 630 2 x 14 112630 630 675 730 700 12 X 10 526 691 4 X 20 738 437.5 530 630 2 x 14 160710 710 755 810 500 18 X 12 324 774 4 X 20 536 477.5 610 710 2 x 16 112710 710 755 810 710 18 X 12 534 774 4 X 20 746 477.5 610 710 2 x 16 160800 800 845 900 560 18 X 12 384 864 4 X 20 596 522.5 700 800 2 x 16 132800 800 845 900 760 18 X 12 584 864 4 X 20 796 522.5 700 800 2 x 16 180900 900 945 1000 630 18 X 12 454 964 4 X 20 666 592.5 800 900 2 x 16 132900 900 945 1000 820 18 X 12 644 964 4 X 20 856 592.5 800 900 2 x 16 2001000 1000 1045 1100 630 24 X 12 454 1065 4 X 20 666 672.5 900 1000 2 x 16 1601000 1000 1045 1100 800 24 X 12 624 1065 4 X 20 836 672.5 900 1000 2 x 16 2001120 1120 1185 1250 900 24 X 12 724 1185 4 X 20 936 742.5 1020 1120 2 x 16 2251120 1120 1185 1250 1150 24 X 12 974 1185 4 X 20 1186 742.5 1020 1120 2 x 16 2801250 1250 1315 1380 1000 24 X 12 794 1324 4 X 25 1084 807.5 1050 1250 3 x 20 2501250 1250 1315 1380 1150 24 X 12 944 1324 4 X 25 1234 807.5 1050 1250 3 x 20 280

Mtr Frame Size

ADTA / ADTA-F General Dimensions ADTA / ADTA-F - Hanger ADTA / ADTA-F - Mounting Feet (Optional)

Blades are available in Aluminium LM6. Proven for use in emergency smoke and fume extract applications up to 400˚C. It is also suitable for continuous operation -40°C to +200°C. Maximum Tip Speed for AL blades is 100m/sec.

GRN Blades specially formulated to provide anti-static properties are available. The principle application for these blades is for installation which is categorised as “potentially explosive atmosphere” and where the risk of ignition of gas or dust vapours through a spark incident is a possibility.

These anti-static blades which are made with 20% glass filling (as standard) have a percentage of carbon black added to control the surface resistivity.

The anti-static blades have a slightly lower tensile strength than the normal GRN blades, this should not concern most applications, however we are recommending that the max continuous operating temperature in limited to -30 degC to 110 degC.

2

8

Part List, Specification, Arrangement

ADTA, ADTA-F Exploded View

AXIAL COUNTER FLANGE (OPTIONAL)

12345678

Tube CasingTerminal BoxViewport CoverMouting Feet (Optional)Counter Flange (Optional)Electrical MotorImpellerFan Guard

Part Description

Painted (RAL 7030), Hot Dipped, Stainless Steel, etcPVC, Cast Iron, etcDepend on t/casing materialDepend on t/casing materialDepend on t/casing materialSpecification as per requestedALU, GRN, GRN-antistaticPainted or Hot Dipped

Specification

TubeCasing

MountingFeet (OPTIONAL)

CounterFlange (OPTIONAL)

Electrical Motor

Impeller

Fan Guard (OPTIONAL)

View Port

Terminal Box

MODEL ØA ØB (PCD) ØC D N x Ø500 500 540 580 40 12 X 10560 560 605 660 40 12 X 10630 630 675 730 40 12 X 10710 710 755 810 40 18 X 12800 800 845 900 40 18 X 12900 900 945 1000 60 18 X 121000 1000 1045 1100 60 24 X 121120 1120 1185 1250 60 24 X 121250 1250 1315 1380 60 24 X 12

9

2 Pole – 2880 rpm

Performance Curve ADTA 500-160-10 50Hz 2880 rpmFEG 85 Outlet Area: 0.200 m2

10°

d

c

b

a

15°

h

g

f

e

27.5 °

n

m

k

j

12.5 °25°20° 22.5 °17.5 °

0

100

200

300

400

500

600

700

800

0 2000 4000 6000 8000 10000 12000 14000 16000 18000

Stati

c Pr

essu

re (P

a)

Volume Flow Rate (m3/h)

10°

15°

27.5 °

12.5 °

17.5 °

20°

22.5 °

25°

0.0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5Ab

sorb

ed P

ower

(kW

)

Performance certified is for Installation type D: Ducted Inlet- Ducted Outlet. Performance ratings do not include the effects of appurtenances (accessories)Power rating kW is fan input power.The Sound Power Level ratings shown are in decibels, referred to 10-12

watts, calculated per AMCA International Standard 301. Values shown are for inlet LWi and LWiA sound power levels for Installation type D: Ducted Inlet-Ducted Outlet. Ratings include the effects of duct end correction.The A-weighted sound ratings shown have been calculated per AMCA International Standard 301.

NICOTRA GEBHARDT SDN BHD certifies that the ADTA series shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.

ρ = 1.2kg/m3

LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 99 99 100 100 95 94 91 87 101b 100 100 100 100 98 96 90 84 103c 105 105 107 107 96 92 88 81 106d 102 102 101 101 91 88 86 81 100e 98 98 100 100 94 92 91 87 101f 98 98 99 99 97 96 92 86 103g 107 107 120 107 98 93 89 82 112h 104 104 104 99 93 89 86 81 101j 96 96 101 100 97 92 90 88 102k 97 97 96 96 99 92 90 88 101m 111 111 108 104 99 94 90 84 106n 108 108 105 102 99 94 90 85 104

Full Octave Band Center Frequency

Ref Hz

10


10°

c

d

b

a

15°

h

g

f

e

27.5 °

n

m

k

j

12.5 ° 17.5 ° 20° 22.5 ° 25°

0

100

200

300

400

500

600

700

800

900

0 5000 10000 15000 20000 25000 30000

Stati

c Pr

essu

re (P

a)


10°

15°

27.5 °

25°

22.5 °

20°

12.5 °

17.5 °

0.0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0Ab

sorb

ed P

ower

(kW

)




ρ = 1.2kg/m3

LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 100 100 95 95 96 96 95 91 102b 101 101 98 94 100 100 95 89 104c 108 108 106 103 100 96 93 87 106d 107 107 106 97 93 91 90 85 102e 100 100 94 94 95 95 94 91 101f 98 98 91 91 94 94 94 91 100g 101 101 98 95 100 100 97 91 105h 103 103 101 99 102 100 95 89 106j 101 101 98 97 98 95 93 92 103k 100 100 97 97 99 95 92 91 103m 105 105 102 102 100 97 95 92 105n 106 106 106 103 102 99 96 92 107


RefHz

2 Pole – 2880 rpm

11


15°

d

c

b

a

22.5°

h

g

f

e

30°

n

m

k

J

27.5°25°20°17.5°

0

200

400

600

800

1000

1200

0 5000 10000 15000 20000 25000 30000 35000 40000

Stati

c Pr

essu

re (P

a)


15°

22.5°

30°

17.5°20°

25°

27.5°

0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

16.0

18.0Ab

sorb

ed P

ower

(kW

)




ρ = 1.2kg/m3

LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 102 102 95 95 97 97 97 96 104b 103 102 95 95 96 98 97 95 104c 104 104 101 102 102 104 101 95 109d 105 105 106 106 105 104 100 94 111e 106 105 96 96 97 96 96 96 104f 106 105 97 97 97 96 95 95 103g 108 108 103 103 100 100 99 95 107h 109 109 112 111 107 105 99 94 113j 106 106 98 98 100 98 96 96 105k 106 106 99 99 100 98 96 95 105m 107 107 102 102 103 100 98 96 107n 112 112 114 110 108 105 101 95 113


RefHz

2 Pole – 2880 rpm

0315-0560 0630-1600(<FS200)

Standard Arrangement

A

A = From the motor to the impeller

AU = From the motor to the impeller, up position.

B = From the impeller to the motor

5

12

4 Pole – 1440 rpm


10°

d

c

b

a

15°

h

g

f

e

27.5 °

n

m

k

j

12.5 °

25°20° 22.5 °17.5 °

0

20

40

60

80

100

120

140

160

180

200

0 1000 2000 3000 4000 5000 6000 7000 8000 9000

Stati

c Pr

essu

re (P

a)


10°

15°

27.5 °

12.5 °

17.5 °

20°

22.5 °

25°

0

0.1

0.2

0.3

0.4

0.5

0.6Ab

sorb

ed P

ower

(kW

)

ρ = 1.2kg/m3




LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 84 80 85 80 79 76 72 64 84b 85 81 85 83 81 75 69 61 85c 90 93 92 81 77 73 66 58 86d 87 90 86 76 73 71 66 57 81e 83 76 85 79 77 76 72 65 83f 83 80 84 82 81 77 71 63 85g 92 105 92 83 78 74 67 59 91h 89 89 83 77 73 71 66 58 80j 81 74 86 82 77 75 73 68 84k 82 76 81 84 77 75 73 67 84m 86 83 84 85 80 76 73 66 86n 93 90 87 84 79 75 70 64 86

HzFull Octave Band Center Frequency

Ref

0630-1600(<FS200) 1120-1600(>FS200)

AU

AU = From the motor to the impeller, up position.

13

4 Pole – 1440 rpm


10°

c

d

b

a

15°

h

g

f

e

27.5°

n

m

k

j

12.5°17.5° 20° 22.5° 25°

0

50

100

150

200

250

0 2000 4000 6000 8000 10000 12000 14000

Stati

c Pr

essu

re (P

a)


10°

15°

27.5°

25°

22.5°

20°

12.5°

17.5°

0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9Ab

sorb

ed P

ower

(kW

)




ρ = 1.2kg/m3

LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 85 77 80 81 81 80 76 69 86b 86 83 79 85 85 80 74 67 88c 93 91 89 86 82 78 72 63 88d 92 91 82 78 76 75 70 62 83e 85 75 79 80 80 79 76 70 85f 83 74 76 79 79 79 76 70 84g 86 83 80 85 85 82 76 69 88h 88 86 84 87 85 80 74 66 89j 86 76 83 83 80 78 77 71 86k 85 79 82 84 80 77 76 72 86m 90 87 87 85 82 80 77 71 88n 92 92 89 88 85 82 77 70 90

RefHz


14

4 Pole – 1440 rpm


15°

d

c

b

a

22.5°

h

g

f

e

30°

n

m

k

J

27.5°25°20°17.5°

0

50

100

150

200

250

300

0 2000 4000 6000 8000 10000 12000 14000 16000 18000 20000

Stati

c Pr

essu

re (P

a)


15°

22.5°

30°

17.5°20°

25°

27.5°

0.0

0.5

1.0

1.5

2.0

2.5Ab

sorb

ed P

ower

(kW

)




ρ = 1.2kg/m3

LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 88 79 81 83 83 83 82 77 89b 88 77 80 81 83 82 81 76 88c 89 80 86 87 89 87 81 75 93d 91 83 92 91 90 86 80 73 94e 91 78 81 83 82 81 82 77 88f 91 79 82 82 81 80 81 76 87g 93 83 87 85 85 84 81 76 90h 94 89 97 92 91 85 80 73 95j 91 79 83 85 83 81 81 77 89k 91 81 84 85 83 81 80 76 89m 92 85 87 88 85 83 81 76 91n 97 99 95 93 90 86 80 73 95


Ref

15

4 Pole – 1440 rpm


15°

d

c

b

a

22.5°

h

g

f

e

30°

n

m

k

j0

50

100

150

200

250

300

0 2000 4000 6000 8000 10000 12000 14000 16000 18000 20000

Stati

c Pr

essu

re (P

a)


Speed: 1440 rpmρ = 1.2kg/m3

15°

22.5°

30°

0

0.5

1

1.5

2

2.5

0 2000 4000 6000 8000 10000 12000 14000 16000 18000 20000

Abso

rbed

Pow

er (k

W)

10°

d

c

b

a

h

12.5°

g

f

e

27.5°

n

m

k

j

25°22.5°20°17.5°15°

0

50

100

150

200

250

300

350

0 5000 10000 15000 20000 25000 30000

Stati

c Pr

essu

re (P

a)


10°12.5°

27.5°

15°

20°

17.5°

22.5°

25°

0.0

0.5

1.0

1.5

2.0

2.5

3.0

0 5000 10000 15000 20000 25000 30000

Abso

rbed

Pow

er (k

W)




ρ = 1.2kg/m3

LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 89 81 84 86 88 87 84 80 93b 89 81 84 92 93 89 84 78 96c 94 86 96 94 91 87 81 74 96d 98 85 91 86 84 82 79 72 90e 88 81 84 86 87 86 85 80 93f 88 81 84 93 92 89 84 78 96g 94 86 97 94 92 87 81 74 96h 99 86 91 86 84 82 78 72 90j 90 80 90 86 86 83 83 80 91k 91 81 91 88 86 84 83 80 92m 92 85 91 95 90 87 84 79 96n 95 93 97 95 94 90 84 77 98


RefHz

16

4 Pole – 1440 rpm


10°

d

c

b

a

20°

h

g

f

e

30°

m

k

j

n

27.5°25°22.5°17.5°15°12.5°

0

100

200

300

400

500

600

0 5000 10000 15000 20000 25000 30000 35000 40000 45000

Stati

c Pr

essu

re (P

a)


10°

20°

30°

12.5°

15°17.5°

22.5°

25°

27.5°

0.0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

Abso

rbed

Pow

er (k

W)




LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 89 83 91 90 90 88 90 76 96b 89 83 90 91 96 92 90 76 99c 93 91 99 99 95 90 85 72 100d 98 93 99 93 91 86 80 71 96e 90 83 93 90 89 89 92 76 96f 90 84 93 90 90 90 91 77 97g 93 89 94 96 96 93 89 78 100h 95 99 102 98 97 92 84 76 101j 90 86 94 92 91 89 90 76 97k 89 86 93 91 91 89 86 78 96m 90 92 94 93 93 90 86 80 97n 93 108 99 98 97 93 87 80 102

Full Octave Band Center FrequencyHz

Ref

ρ = 1.2kg/m3

17

4 Pole – 1440 rpm


7.5°

d

c

b

a12.5°

h

g

f

e

20°

j

n

m

k

17.5°15°10°

0

100

200

300

400

500

600

700

0 10000 20000 30000 40000 50000 60000

Stati

c Pr

essu

re (P

a)


7.5°

12.5°

20°

10°15°

17.5°

0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

Abso

rbed

Pow

er (k

W)




ρ = 1.2kg/m3

LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 92 88 94 95 90 86 86 82 96b 87 88 92 96 90 87 85 80 96c 89 89 92 97 93 90 88 82 98d 91 94 97 102 99 95 89 82 103e 91 89 95 96 91 87 85 81 97f 91 90 94 95 91 87 85 79 96g 91 92 94 96 93 90 88 82 98h 93 95 100 102 98 94 89 83 103j 93 93 98 97 94 89 86 80 99k 94 95 98 96 93 89 86 81 98m 94 95 97 96 93 90 87 83 98n 95 99 102 100 98 94 90 86 103


Ref

18

4 Pole – 1440 rpm


10°

d

c

b

a

17.5°

f

h

g

e

22.5°

m

j

12.5°15°

20°n

k

0

100

200

300

400

500

600

700

0 10000 20000 30000 40000 50000 60000 70000 80000

Stati

c Pr

essu

re (P

a)


10°

17.5°

22.5°

12.5°

15°

20°

0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

16.0

18.0

Abso

rbed

Pow

er (k

W)




ρ = 1.2kg/m3

LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 96 91 97 97 94 90 89 87 99b 96 92 96 97 94 91 90 86 99c 96 93 98 102 99 96 93 87 104d 98 97 106 106 105 99 93 87 108e 97 94 99 99 96 92 90 85 101f 97 94 99 98 95 91 90 85 100g 97 95 99 99 97 94 92 88 102h 99 101 109 106 103 99 94 89 108j 97 94 99 99 96 92 90 85 101k 97 95 99 99 95 92 91 85 101m 97 95 99 100 97 95 92 88 103n 99 101 109 106 102 98 94 89 108

Full Octave Band Center FrequencyHz

Ref

19

4 Pole – 1440 rpm


10°

d

cb

a

b 181

a0

200

400

600

800

1000

1200

1400

0 10000 20000 30000 40000 50000 60000 70000

Stati

c Pr

essu

re (P

a)



10°

b 8.068

a

0

2

4

6

8

10

12

Abso

rbed

Pow

er (k

W)

5°

d

c

b

a

10°

h

g

f

e

15°

n

m

k

j

7.5° 12.5°

0

100

200

300

400

500

600

700

800

900

0 10000 20000 30000 40000 50000 60000 70000 80000 90000

Stati

c Pr

essu

re (P

a)


5°

10°

15°

7.5°

12.5°

0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

16.0

18.0

20.0

Abso

rbed

Pow

er (k

W)


watts, calculated per AMCA International Standard 301. Values shown are for outlet LWo and LWoA sound power levels for Installation type D: Ducted Inlet-Ducted Outlet. Ratings include the effects of duct end correction.The A-weighted sound ratings shown have been calculated per AMCA International Standard 301.


ρ = 1.2kg/m3

LWoA63 125 250 500 1K 2K 4K 8K dB(A)

a 100 91 96 99 98 94 92 92 102b 96 91 99 105 106 103 98 91 109c 97 95 106 106 106 101 96 89 110d 99 101 108 106 104 99 94 88 108e 103 93 98 99 98 93 92 91 102f 99 91 96 98 99 96 94 91 103g 97 93 99 105 105 102 98 92 109h 101 104 111 107 105 100 95 89 110j 105 95 102 99 98 93 91 89 103k 102 94 100 98 97 94 93 89 102m 104 96 102 102 102 99 97 92 106n 106 113 112 107 105 100 96 90 110

HzRef


20

4 Pole – 1440 rpm


12.5°

h

g

f

e

d

c

b

7.5°

a

10°

0

100

200

300

400

500

600

700

800

900

1000

0 20000 40000 60000 80000 100000 120000

Stati

c Pr

essu

re (P

a)


12.5°

7.5°

10°

0.0

5.0

10.0

15.0

20.0

25.0

Abso

rbed

Pow

er (k

W)




ρ = 1.2kg/m3

LWoA63 125 250 500 1K 2K 4K 8K dB(A)

a 103 93 99 103 102 98 95 96 106b 100 93 102 107 109 105 100 94 112c 97 99 111 111 109 103 98 92 113d 101 111 108 106 103 99 96 92 108e 105 97 103 103 102 97 95 95 106f 106 99 104 108 109 106 101 95 113g 101 101 115 112 110 104 100 94 114h 104 111 109 106 104 100 97 92 109


RefHz

21

6 Pole – 960 rpm


10°

d

c

b

a

15°

h

g

f

e

27.5°

n

m

k

j

12.5°

25°20° 22.5°17.5°

0

10

20

30

40

50

60

70

80

90

0 1000 2000 3000 4000 5000 6000

Stati

c Pr

essu

re (P

a)


10°

15°

27.5°

12.5°

17.5°

20°

22.5°

25°

0.00

0.02

0.04

0.06

0.08

0.10

0.12

0.14

0.16Ab

sorb

ed P

ower

(kW

)




ρ = 1.2kg/m3

LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 73 76 73 70 68 65 58 50 73b 74 76 75 73 68 62 55 47 74c 83 83 77 70 66 60 52 44 73d 80 79 71 65 63 59 52 43 70e 70 76 73 69 68 65 59 52 73f 73 75 74 73 70 65 58 50 75g 90 88 78 72 67 61 54 46 76h 81 77 71 66 63 60 53 45 70j 68 77 75 70 67 65 61 55 73k 70 72 74 71 66 65 61 54 73m 75 75 76 73 69 66 60 53 75n 82 80 76 72 68 64 58 51 74


Ref Hz

22

6 Pole – 960 rpm


10°

c

d

b

a

15°

h

g

f

e

27.5°

n

m

k

j

12.5° 17.5° 20° 22.5° 25°

0

10

20

30

40

50

60

70

80

90

100

0 1000 2000 3000 4000 5000 6000 7000 8000 9000

Stati

c Pr

essu

re (P

a)


10°

15°

27.5°

25°

22.5°

20°

12.5°

17.5°

0.00

0.05

0.10

0.15

0.20

0.25

0.30Ab

sorb

ed P

ower

(kW

)




ρ = 1.2kg/m3

LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 71 70 71 72 71 68 63 56 75b 75 72 74 76 73 67 61 54 77c 83 81 80 74 70 65 57 49 76d 83 77 73 68 67 63 57 49 72e 70 68 71 71 70 68 63 57 75f 69 66 69 70 70 68 64 58 75g 75 72 74 76 74 70 63 56 78h 78 76 77 77 73 68 60 52 78j 71 70 74 73 70 69 65 59 76k 73 72 75 73 69 68 65 60 75m 79 78 78 74 72 69 65 60 77n 82 81 79 77 74 70 64 58 79


RefHz

23

6 Pole – 960 rpm


15°

d

c

b

a22.5°

h

g

f

e

30°

n

m

k

J

27.5°25°20°17.5°

0

20

40

60

80

100

120

140

0 2000 4000 6000 8000 10000 12000 14000

Stati

c Pr

essu

re (P

a)


15°

22.5°

30°

17.5°20°

25°

27.5°

0.0

0.1

0.2

0.3

0.4

0.5

0.6

Abso

rbed

Pow

er (k

W)




ρ = 1.2kg/m3

LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 73 71 73 74 74 73 69 64 79b 72 70 72 73 73 72 68 63 78c 74 75 78 79 78 74 68 61 82d 77 79 83 81 78 73 66 59 83e 74 71 73 73 72 72 70 65 78f 74 72 73 72 71 71 69 64 77g 78 77 79 76 75 73 68 63 80h 82 85 88 82 78 73 66 59 84j 75 72 75 75 73 72 70 66 79k 76 74 76 75 73 72 69 65 79m 79 77 79 77 75 73 69 64 80n 89 88 86 82 79 73 67 60 84


RefHz

24

6 Pole – 960 rpm


15°

d

c

b

a

22.5°

h

g

f

e

30°

n

m

k

j0

50

100

150

200

250

300

0 2000 4000 6000 8000 10000 12000 14000 16000 18000 20000

Stati

c Pr

essu

re (P

a)



15°

22.5°

30°

0

0.5

1

1.5

2

2.5

0 2000 4000 6000 8000 10000 12000 14000 16000 18000 20000

Abso

rbed

Pow

er (k

W)

10°

d

c

b

a

h

12.5°

g

f

e

27.5°

n

m

k

j

25°22.5°20°17.5°15°

0

20

40

60

80

100

120

140

160

0 2000 4000 6000 8000 10000 12000 14000 16000 18000

Stati

c Pr

essu

re (P

a)


10°12.5°

27.5°

15°

20°

17.5°

22.5°

25°

0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

0 2000 4000 6000 8000 10000 12000 14000 16000 18000

Abso

rbed

Pow

er (k

W)




ρ = 1.2kg/m3

LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 75 74 76 78 78 76 72 68 82b 75 74 80 83 81 76 71 65 85c 80 82 86 82 79 74 67 60 84d 81 79 82 75 73 71 65 58 79e 73 71 73 74 74 73 69 64 79f 75 74 81 83 81 76 71 65 85g 80 83 87 83 79 74 67 60 84h 82 80 82 75 73 70 65 59 79j 76 77 81 77 76 74 73 70 82k 77 78 83 78 76 75 73 70 83m 80 80 85 84 80 77 73 68 86n 85 87 89 86 83 78 72 65 88


RefHz

25

6 Pole – 960 rpm


10°

d

c

b

a20°

h

g

f

e30°

m

k

j

n

27.5°25°22.5°17.5°15°12.5°

0

50

100

150

200

250

300

0 5000 10000 15000 20000 25000 30000

Stati

c Pr

essu

re (P

a)


10°

20°

30°

12.5°

15°17.5°

22.5°

25°

27.5°

0.0

0.5

1.0

1.5

2.0

2.5

Abso

rbed

Pow

er (k

W)




ρ = 1.2kg/m3

LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 76 79 81 80 79 80 72 58 85b 76 78 81 85 84 81 72 58 88c 83 87 90 87 82 77 67 55 88d 85 87 90 82 78 73 65 56 85e 76 80 84 80 80 81 73 57 86f 77 80 84 81 81 81 73 59 86g 82 84 87 87 85 81 72 62 89h 88 92 93 88 85 78 70 62 90j 79 82 85 82 81 81 73 59 86k 78 81 84 82 81 79 73 65 86m 83 85 85 84 83 79 74 68 87n 93 94 90 89 86 81 74 67 91


RefHz

26

6 Pole – 960 rpm


7.5°

d

c

b

a

12.5°

h

g

f

e

20°

j

n

m

k

17.5°15°10°

0

50

100

150

200

250

300

0 5000 10000 15000 20000 25000 30000 35000 40000

Stati

c Pr

essu

re (P

a)


7.5°

12.5°

20°

10°15°

17.5°

0.0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

Abso

rbed

Pow

er (k

W)




ρ = 1.2kg/m3

LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 80 84 85 82 78 76 74 70 85b 78 83 85 83 79 76 73 67 85c 80 83 87 86 83 80 75 69 88d 84 87 91 91 87 82 75 68 92e 80 86 86 83 79 76 73 69 85f 81 85 85 83 79 77 72 66 85g 83 86 87 86 83 80 75 69 88h 85 91 92 90 86 82 76 70 92j 84 89 88 86 82 78 73 67 88k 86 89 88 85 82 78 74 69 87m 86 88 88 85 82 79 76 72 88n 88 93 92 90 86 82 78 74 92


RefHz

27

6 Pole – 960 rpm


10°

d

c

b

a

17.5°

f

h

g

e

22.5°

m

j12.5° 15°

20°n

k

0

50

100

150

200

250

300

350

0 5000 10000 15000 20000 25000 30000 35000 40000 45000 50000

Stati

c Pr

essu

re (P

a)


10°

17.5°

22.5°

12.5°

15°

20°

0.0

1.0

2.0

3.0

4.0

5.0

6.0

Abso

rbed

Pow

er (k

W)




ρ = 1.2kg/m3

LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 83 85 87 86 82 80 78 76 88b 84 85 87 86 83 81 78 74 88c 85 87 91 91 88 85 80 74 93d 88 93 97 96 92 86 80 74 97e 86 88 90 88 84 81 78 73 90f 86 88 90 87 83 81 78 73 89g 87 88 90 89 86 84 80 76 91h 91 97 100 95 91 87 82 77 97j 86 88 90 88 84 81 78 73 90k 87 88 90 87 84 82 78 72 90m 87 88 91 89 87 84 80 76 92n 91 97 100 94 90 86 82 77 97


RefHz

28

6 Pole – 960 rpm


10°

d

cb

a

b 181

a0

200

400

600

800

1000

1200

1400

0 10000 20000 30000 40000 50000 60000 70000

Stati

c Pr

essu

re (P

a)



10°

b 8.068

a

0

2

4

6

8

10

12

Abso

rbed

Pow

er (k

W)

5°

d

c

b

a

10°

h

g

f

e

15°

n

m

k

j

7.5° 12.5°

0

50

100

150

200

250

300

350

400

0 10000 20000 30000 40000 50000 60000

Stati

c Pr

essu

re (P

a)


5°

10°

15°

7.5°

12.5°

0.0

1.0

2.0

3.0

4.0

5.0

6.0

Abso

rbed

Pow

er (k

W)




ρ = 1.2kg/m3

LWoA63 125 250 500 1K 2K 4K 8K dB(A)

a 85 85 88 89 86 83 82 82 92b 83 87 93 96 95 90 84 77 98c 86 93 97 97 93 88 82 75 98d 91 96 99 95 91 86 81 75 97e 87 87 89 89 85 83 82 81 91f 85 85 88 89 87 85 83 80 92g 85 87 93 95 93 90 85 79 97h 93 98 101 96 93 88 82 76 98j 89 90 93 89 86 82 80 78 92k 88 88 91 88 86 84 81 77 92m 90 91 93 93 91 89 85 80 96n 101 103 103 97 93 88 83 77 99


RefHz

29

6 Pole – 960 rpm6 Pole


7.5°

d

c

b

a

12.5°

h

g

f

e

10°

0

50

100

150

200

250

300

350

400

450

0 10000 20000 30000 40000 50000 60000 70000

Stati

c Pr

essu

re (P

a)


7.5°

12.5°

10°

0.0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

Abso

rbed

Pow

er (k

W)




ρ = 1.2kg/m3

LWoA63 125 250 500 1K 2K 4K 8K dB(A)

a 87 87 92 93 90 87 86 87 96b 86 90 96 99 97 92 87 81 101c 91 98 101 99 94 90 85 79 100d 98 100 98 95 91 88 84 80 97e 91 91 94 93 89 86 86 86 95f 92 93 98 99 98 93 88 82 102g 93 100 104 100 96 91 86 81 102h 99 100 100 95 92 89 85 80 98

RefHz


30

8 Pole – 720 rpm


15°

d

c

b

a

22.5°

h

g

f

e

30°

n

m

k

j0

50

100

150

200

250

300

0 2000 4000 6000 8000 10000 12000 14000 16000 18000 20000

Stati

c Pr

essu

re (P

a)



15°

22.5°

30°

0

0.5

1

1.5

2

2.5

0 2000 4000 6000 8000 10000 12000 14000 16000 18000 20000

Abso

rbed

Pow

er (k

W)

10°

d

c

b

a

h

12.5°

g

f

e

27.5°

n

m

k

j

25°22.5°20°17.5°15°

0

10

20

30

40

50

60

70

80

90

0 2000 4000 6000 8000 10000 12000 14000

Stati

c Pr

essu

re (P

a)


10°12.5°

27.5°

15°

20°

17.5°

22.5°

25°

0.00

0.05

0.10

0.15

0.20

0.25

0.30

0.35

0.40

0 2000 4000 6000 8000 10000 12000 14000

Abso

rbed

Pow

er (k

W)




ρ = 1.2kg/m3

LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 66 68 70 72 71 68 64 60 76b 66 69 77 77 73 68 62 56 78c 71 80 77 75 71 65 58 51 76d 70 75 70 68 66 63 56 51 71e 66 68 70 71 70 69 64 59 75f 66 70 77 76 73 68 62 56 78g 71 81 77 75 71 65 58 51 76h 71 75 70 68 66 62 56 51 71j 65 75 75 71 68 68 65 62 75k 66 76 76 71 69 68 65 62 76m 70 76 80 75 72 69 65 60 78n 77 81 82 79 75 70 63 56 80


RefHz

31

8 Pole – 720 rpm


10°

d

c

b

a20°

h

g

f

e

30°

m

k

j

n

27.5°25°22.5°17.5°15°12.5°

0

20

40

60

80

100

120

140

160

0 5000 10000 15000 20000 25000

Stati

c Pr

essu

re (P

a)


10°

20°

30°

12.5°

15°17.5°

22.5°

25°

27.5°

0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

Abso

rbed

Pow

er (k

W)




ρ = 1.2kg/m3

LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 68 75 75 74 72 74 60 46 78b 68 75 75 80 76 73 60 46 81c 76 83 83 79 74 68 56 43 80d 78 83 83 75 70 64 55 46 78e 68 77 77 73 73 76 60 44 80f 69 77 78 75 75 75 61 47 80g 75 80 82 81 77 72 62 51 82h 84 86 87 81 76 68 60 52 83j 71 79 79 76 74 75 61 47 80k 71 78 78 76 74 71 63 55 79m 77 79 79 78 75 71 65 59 80n 93 84 84 82 78 72 65 58 83


RefHz

32

8 Pole – 720 rpm


7.5°

d

c

b

a

12.5°

h

g

f

e20°

j

n

m

k

17.5°15°10°

0

20

40

60

80

100

120

140

160

0 5000 10000 15000 20000 25000 30000

Stati

c Pr

essu

re (P

a)


7.5°

12.5°

20°

10°15°

17.5°

0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

Abso

rbed

Pow

er (k

W)




ρ = 1.2kg/m3

LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 73 78 78 74 70 70 66 62 77b 73 76 80 74 71 69 64 59 78c 74 77 82 78 75 72 66 60 81d 79 82 86 83 79 73 66 59 84e 74 79 80 75 71 69 65 61 78f 75 78 79 75 72 69 63 57 78g 77 79 81 78 75 72 66 60 81h 80 85 86 82 78 73 67 61 84j 78 83 83 79 74 71 65 59 80k 80 83 83 78 74 71 66 61 80m 80 82 82 78 75 72 68 64 81n 84 86 86 82 78 75 71 67 84


RefHz

33

8 Pole – 720 rpm


10°

d

c

b

a

17.5°

f

h

g

e

22.5°

m

j12.5° 15°

20°n

k

0

20

40

60

80

100

120

140

160

180

0 5000 10000 15000 20000 25000 30000 35000 40000

Stati

c Pr

essu

re (P

a)


10°

17.5°

22.5°

12.5°

15°

20°

0.0

0.5

1.0

1.5

2.0

2.5

Abso

rbed

Pow

er (k

W)




ρ = 1.2kg/m3

LWiA63 125 250 500 1K 2K 4K 8K dB(A)

a 76 81 81 78 74 73 71 69 81b 77 80 81 78 75 74 70 66 81c 78 83 86 83 80 77 71 65 86d 82 90 90 89 83 77 71 65 89e 79 83 83 80 76 74 69 64 83f 79 83 83 79 75 74 69 64 82g 80 84 84 82 79 76 72 68 84h 86 93 94 87 83 78 73 68 90j 79 83 83 80 76 74 69 64 83k 80 84 84 79 76 75 69 63 83m 80 84 85 82 79 76 72 68 85n 86 93 94 86 82 78 73 68 89


RefHz

34

8 Pole – 720 rpm


10°

d

cb

a

b 181

a0

200

400

600

800

1000

1200

1400

0 10000 20000 30000 40000 50000 60000 70000

Stati

c Pr

essu

re (P

a)



10°

b 8.068

a

0

2

4

6

8

10

12

Abso

rbed

Pow

er (k

W)

5°

d

c

b

a10°

h

g

f

e

15°

n

m

k

j7.5° 12.5°

0

50

100

150

200

250

0 5000 10000 15000 20000 25000 30000 35000 40000 45000

Stati

c Pr

essu

re (P

a)


5°

10°

15°

7.5°

12.5°

0.0

0.5

1.0

1.5

2.0

2.5

Abso

rbed

Pow

er (k

W)




ρ = 1.2kg/m3

LWoA63 125 250 500 1K 2K 4K 8K dB(A)

a 76 80 83 82 78 76 76 76 85b 76 84 89 90 87 82 75 68 91c 80 90 90 90 85 80 73 66 91d 86 92 92 88 83 78 72 66 90e 78 82 83 82 77 76 75 74 85f 76 81 82 83 80 78 75 73 86g 77 83 89 89 86 82 76 70 90h 88 95 95 89 84 79 73 67 91j 80 86 86 82 77 75 73 71 85k 79 84 85 81 79 77 73 69 85m 81 87 87 87 84 81 76 71 89n 98 96 97 89 85 80 74 68 92


RefHz

35

8 Pole – 720 rpm


7.5°

d

c

b

a

12.5°

h

g

f

e

10°

0

50

100

150

200

250

0 10000 20000 30000 40000 50000 60000

Stati

c Pr

essu

re (P

a)


7.5°

12.5°

10°

0.0

0.5

1.0

1.5

2.0

2.5

3.0

Abso

rbed

Pow

er (k

W)




ρ = 1.2kg/m3

LWoA63 125 250 500 1K 2K 4K 8K dB(A)

a 78 83 87 86 82 79 80 81 89b 78 87 92 93 89 84 78 72 94c 87 94 94 91 86 81 76 71 92d 95 92 92 87 83 80 76 72 90e 81 88 87 86 81 79 79 79 89f 83 89 93 94 90 85 79 73 95g 88 98 98 93 87 84 78 72 95h 96 93 93 88 84 81 76 71 91


RefHz

When ordering Nicotra Gebhardt Axial fans, please specify your requirements in the followings sequence to avoid confusion.

1. Fan Type and Performance Data - Fan Type: ADTA, ADTA-F - Capacity - Static Pressure

2. Electric Motor Details - Power, main supply, voltage, frequency, 50 Hz or 60 Hz type - Motor Speed, Polarity - Insulation (Class F, Class H, etc)

3. Impeller Material - Glass Reinforced Nylon, GRN - Aluminium, ALU - Anti Static GRN

Fan Type HUB Size No of Blades and Blade Type

Blades Angle

Blade Material Motor Power/Pole#

Fan Diameter

Description (Sample)

ADTA1000/400/08C/20.0/ALU-18.5/4P

ADTA Long Case Drive

1000 Fan Diameter = 1000mm

400T Hub Size

8C Blade type “C”, Qty = 8

20˚ Blade Angle 20 Deg

ALU ALU Material

Nomenclature

36

/

37

Appendix

Wiring Diagram For Various Application

SPAIN 28810 Villalbilla (Madrid) Ctra Alcalá - Villar del Olmo M-204 km 2.830 Telephone +34-91-8846110Telefax +34-91-8859450E-Mail [email protected]

c/.Coso, 67-75, esc. 1.a,1.oB ES-50001 Zaragoza Telephone 00 34-9 76-29 05 50 Telefax 00 34-9 76-29 81 27E-Mail [email protected]

BELGIUMHaeghensgoed 13 00/01B-9270 LaarneTelephone +32 09336 00 02Telefax +32 09336 00 05E-Mail [email protected]

FRANCE69745 Genas -Cedex8 Chemins des Mûriers - Z.I. mi-plaine Telephone +33-0472-790120Telefax +33-0472-790121E-Mail [email protected]

GERMANY08491 NetzschkauBahnhofstraße 43Telephone +49 03765 394 99 0Telefax +49 03765 394 99 99E-Mail [email protected]

SWEDEN Box 237 Kraketorpsgatan 30 43123 Mölndal Telephone 00 46-31-87 45 40 Telefax 00 46-31-87 85 90E-Mail [email protected]

GREAT BRITAIN S62 6JQ Rotherham Yorkshire Unit D, Parkgate Business Park Telephone +44-01709-780760 Telefax +44-01709-780762E-Mail [email protected]

Monarch House1-7 Smyth RoadBedminsterBristolTelephone +44 (0)870 043 5207 Telefax +44 (0)870 043 5212E-Mail [email protected]

MALAYSIA

Lot 1799, Jalan Balakong, Kawasan Perindustrian Bukit Belimbing, 43300 Seri Kembangan, Selangor Darul Ehsan. Telephone

+6-03-89612588

Telefax

+6-03-89618337 / 5723E-Mail

[email protected]

THAILAND10150 Bangkok 6/29 Soi Suksawadi 2, Moo 4Suksawadi Road, Jomthong Telephone +662-4761823-4-5-6 Telefax +662-4761827E-Mail [email protected]

SINGAPORENo. 3, Science Park Dr.,#04-07 The Franklin,Singapore Science Park 1,Singapore 118223.Telephone

(065) 6265 1522

Telefax

(065) 6265 2400E-Mail

[email protected]

AUSTRALIA65 Yale Drive, Epping,VIC 3076 AustraliaTelephone +61-03-90175333 / 90175333Telefax +61-03-84013969 / 84013969E-Mail [email protected]

INDIA28F Sector 31, KasnaGreater Noida - 201 308Gautam Budh Nagar ( UP )Telephone +91 120 4203400Telefax +91 120 4203401E-Mail [email protected]

CHINANo. 88 Tai An Road, Xin Qiao Village Shi Ji Town Panyu, Guangzhou 511450 ChinaTelephone 0086 20 39960570 Telefax 0086 20 39960569 E-Mail [email protected]

UNITED STATES1503 W. Misty Breeze CirKaysville, UT 84037Telephone

001(801) 544-9909Telefax

001(801) 315-9400Mobile 001(801) 694-0353E-Mail

[email protected]

Nicotra Gebhardt GmbH

Gebhardtstrasse 19-25 74638 Waldenburg, Germany

Telephone +49 (0)7942 101 0 Telefax +49 (0)7942 101 170 E-Mail [email protected]

www.nicotra-gebhardt.com

Nicotra Gebhardt S.p.A

Via Modena, 18 24040 Ciserano - Loc. Zingonia (BG), Italy

Telephone +39 035 873 111 Telefax +39 035 884 319 E-mail [email protected]

www.nicotra-gebhardt.com

AXIAL FAN ADTA / EN - OCTOBER / 2016

AXIAL FAN SERIES - my.amca.org Approved... · Our range of axial fan is fully adjustable blades and...

Documents

Transcript of AXIAL FAN SERIES - my.amca.org Approved... · Our range of axial fan is fully adjustable blades and...