OPR

Combining efficient LED light sources with advanced optic technology, Hella marine LED products deliver more light output per watt than traditional bulb lamps and thus provide considerable power saving. Hella marine NaviLEDPRO lamps use less than 10% of the power required to run a 25W incandescent bulb lamp certified to the same visible distance.

Hella marine LED technology has no filaments to break, making the lamps extremely shock and vibration resistant for reliable illumination and safety. Advanced optics deliver optimal horizontal and vertical light according to international standards. They provide enhanced visibility compared to bulb lamps. Cut-off angles are ultra precise, clearly indicating a vessels movement and heading.

Each lamp is a completely sealed unit. Proven design, precision engineering, and the use of high impact acrylic materials ensures superior resistance to water, impact, UV and wear and tear.Hella marine LED lamps are also pre-wired with quality marine cable sealed to the lamp body for time saving installations and reliable electrical connection.

Advanced MultivoltTM circuitry provides reliable illumination across a range of DC inputs such as 8-28 volts or 9-33 volts. MultivoltTM LED lamps can be connected to 12 or 24 volt systems providing full light performance even during low battery voltages and voltage drop over long cable runs and connectors.

Completely sealed

Ultra low power consumption

UV, corrosion and impact resistant

Pre-wired with twin core marine cable

MultivoltTM 9-33V DC

Reverse polarity and spike protected

Ultra secure and time saving installation

Internationally approved

Yacht and powerboat certified

Ultra reliable 2 and 3 nautical mile LED Port, Starboard, Stern and Masthead lamps.

Completely sealed

Ultra low power consumption

UV, corrosion and impact resistant

Pre-wired with marine cable

MultivoltTM 8-28V DC

Reverse polarity and spike protected

Secure and time saving installation

Internationally approved

Yacht and powerboat certified

Attractive and compact 2 nautical mile LED Port, Starboard and Stern lamps.

Completely sealed

Ultra low power consumption

UV, corrosion and impact resistant

Pre-wired with marine cable

MultivoltTM 9-33V DC

Reverse polarity and spike protected

Internationally approved

Wide range of installation options

Power saving 2 nautical mile LED Anchor and All Round lamps.

Designed and manufactured in New Zealand and proven worldwide, Hella marine LED navigation lamps provide power saving, highly visible and ultra durable lighting for reliability and safety at sea.

RINA

IMOCOL REG 72

A-16ABYC

USCG

BSH

RINA

IMOCOL REG 72

A-16ABYC

USCG

BSH

RINA

IMOCOL REG 72

A-16ABYC

USCG

BSH

UV resistant

Impact resistant materials

Low power consumption

Completely sealed

Pre-wired with marine cable

MultivoltTM 9-30V DC

Reverse polarity and spike

protected

Ultra reliable LED technology enabled the design of a compact marine floodlight suitable for applications subject to high vibration, impact and shock loads all in a completely sealed, waterproof housing.

Advanced Hella marine Free-Form reflectors and LED technology combine to provide intense white light for close range homogeneous illumination.

Very low power consumption, less then 20% of the energy required to operate a 55W H3 halogen floodlight, thus providing substantial power savings onboard.

Supplied with stainless steel mounting hardware and pre-wired with 2m of marine cable, each lamp is a completely sealed fit and forget unit.

The LED Floodlight series are power saving, completely sealed floodlights providing all the reliability advantages of

Hella marine LED technology.

LED Floodlights LED Task Lamps

Power consumption is low at less than 3W, (

Designed and manufactured in New Zealand and consuming less than 0.8W per lamp (