Brig

Rivera

FrenkendorfWallisellen

WolhusenLa Neuveville

Langnau

Ziegelbrcke

Customised and technically convincing solutions for the functional improvement of traffic surfaces

25 YearsExpertise & Progress

RESA-JOINT

RSAG-NetworkEfficient & Competent

REPARATUR- UND SANIERUNGSTECHNIK NORD AG8304 WALLISELLEN HERTISTRASSE 11TELEFON +41 (0)44 / 839 30 85 FAX +41 (0)44 / 839 30 86www.rsag-schweiz.ch nord@rsag-schweiz.ch

REPARATUR- UND SANIERUNGSTECHNIK NORD AG8866 ZIEGELBRCKE ZIEGELBRCKSTRASSE 67TELEFON +41 (0)55 / 535 54 13 FAX +41 (0)55 / 535 63 47www.rsag-schweiz.ch nord@rsag-schweiz.ch

REPARATUR- UND SANIERUNGSTECHNIK NORDWEST AG4402 FRENKENDORF BCHLIACKERSTRASSE 2TELEFON +41 (0)61 / 827 90 10 FAX +41 (0)61 / 827 90 19www.rsag-schweiz.ch nordwest@rsag-schweiz.ch

RISANAMENTO SUD SA6802 RIVERA CP 567TELEFON +41 (0)91 / 946 36 21 FAX +41 (0)91 / 946 36 66www.rsag-schweiz.ch sud@rsag-schweiz.ch

REPARATUR- UND SANIERUNGSTECHNIK MITTE AG3550 LANGNAU BURGDORFSTRASSE 33TELEFON +41 (0)34 / 408 40 20 FAX +41 (0)34 / 408 40 21www.rsag-schweiz.ch mitte@rsag-schweiz.ch

REPARATUR- UND SANIERUNGSTECHNIK MITTE AG WOLHUSEN6110 WOLHUSEN ENTLEBUCHERSTRASSE 56TELEFON +41 (0)41 / 490 06 66 FAX +41 (0)41 / 490 06 67www.rsag-schweiz.ch wolhusen@rsag-schweiz.ch

RSSA OUEST2520 LA NEUVEVILLE CHEMIN DE SAINT-JOUX 7TELEFON +41 (0)32 / 751 34 85 FAX +41 (0)34 / 408 40 21www.rsag-schweiz.ch ouest@rsag-schweiz.ch

REPARATUR- UND SANIERUNGSTECHNIK RHONE AG3900 BRIG SCHINERSTRASSE 8TELEFON +41 (0)27 / 924 26 26 FAX +41 (0)27 / 924 21 92www.rsag-schweiz.ch rhone@rsag-schweiz.ch

ISO 9001 certified www.rsag-schweiz.ch

The RSAG-Network

Successful system tests: At BAM Berlin and EMPA Dbendorf- Movement absorption heat / cold / vibration- Rutting (up to + 60 C) - Practical experience with numerous bridge

joint applications

High-performance Polymer Bridge JointsRESA-JOINT, a further development of the successful THORMA-JOINT system of RSAG.

The New Generation for the Highest StandardsHigh-performance Polymer Bridge Joints

RESA-JOINTFor Bridges and Buildings

Structure of the bridge joint RESA-JOINT

The joint cavity is carefully broken

out or recessed in concrete

The joint cavity is cleaned by sandblasting

Depending on the situation waterproofing or secondary drainage

may be integrated

Installation of base plate over the joint

opening

Laying of separation

mat and - plate

Pouring high-performance

polymer into the joint cavity

The joint fits seamlessly

onto the road- or

park deck surface

The real art of bridge construction is creating bridge joints that arelow-noise, 100 per cent imperme-able, and can support punctual loads.Large movements caused by diffe-rent behaviours of expansion dueto temperature variations betweenbridge constructions place particu-larly high demands on design andprocessing.

RESA-JOINTThe standard solution for up to 30mm total movement

Also applicable for wall and border areas

RESA-JOINT, a further development of the successful THORMA-JOINT system of RSAGwith the following advantages: Cold installation, no dust or smoke Resilient Short installation time, installation

time is around 40 - 60% shorter Seamless system, low-noise and

great comfort for traffic Installation of joints independent

of length Compatible, waterproofing

membrane or park deck top surface. Secondary drainage can be integrated.

Also suitable for expansion joints with higher vibrations.

Long lifespan and great resilience Safe handling, higher working

security

Applications:RESA-JOINT is used successfully for bridges and park decks that need to absorb up to 30mm at an angle to the direction of motion or special solutions for e.g.:- Combined longitudinal and transverse joints, or- Joints to walls and bordersRESA-JOINT is the ideal flexible connection between dilating bodies.

Technology: The seamless system RESA-JOINT made of

high performance polymers is stable as well as being resilient.

Processing:The system RESA-JOINT is the new generation of bridge joints based on high performance polymers. Installation is carried out cold, in clearly definedsteps and documented precisely according toISO 9001

extension leaffixing bolt

secondary drainage

e.g. adjustment of park deck surface

separating mat

sealer

fitting of water- proof membrane

RESA-JOINT Special solutions without distribution construction

Combined longitudinal and transverse joints

RESA-JOINT

Versions:

150 - 500 40 - 120 30

Installation width mm

Strength mmmin. max.

Movement capacity mm