Vak Pak Replacement Parts Catalog · Vak Pak Replacement . Parts Catalog . 2 . Page #’s. Contents...

1

Vak Pak Builders Supply, Inc.

9731-1 Beach Blvd. / Jacksonville, FL 32246

Ph: 904-642-2267 / Fax: 904-641-2012

Toll Free: 888-682-5725 / E-mail: [email protected]

Web Site: www.vakpak.com

Vak Pak Replacement Parts Catalog

2

Page #’s Contents

2 Table of Contents

3 Introduction to Vak Pak Builders Supply, Inc.

4 Gauges, Thermometer, Filter Cartridges and Grids

5 Flowmeters

6-9 IG / IG3 Pumps, Pump Curves, and Replacement Parts

10-11 Push Pull Valves and Replacement Parts

12 Spin Valves

13 Crank Style Valve Repair kits, and Misc. Valves

14-15 FWLC (Float Water Level Control)

16-17 RWLC (Reservoir Water Level Control)

18-19 DP100 (Dynapure 100 & 150 SF Filter)

20 Vak Pak 84SF Separator Tank

21 Chlormatic and Bromatic Replacement Parts

22 Chlorine and PH Controllers and Liquid Feeders

23 Remote Chemical Storage Crocks

24 Cabinet Replacement List By Model Number

25-26 Cabinet Replacement Parts

27-39 Cabinet Specifications

39 Collector Tank Skirt, Cabinet Identification

40-42 Main Drains, VGB Compliant

43 Main Drain Model Identification

44 Grates & Unblockable Drains, VGB Approved

45 Terms & Conditions

Table Of Contents

3

Model

Number

Description

21003 Vacuum Gauge 0-30 PSI 2”

21001 Pressure Gauge 0-60 PSI 2” Back

Mount

21002 Pressure Gauge 0-60 PSI 2” Bottom

Mount

Model

Number

Description

21100 Thermometer, 2-1/2” In Line

Model

Number

Description

33850 Grid, DE 19” Round

33860 Spacer for DE Element

FC-9740 13.5” Anthony Rectangular Grid

FC-9750 17.5” Anthony Rectangular Grid

Gauges and Thermometers

D.E. Grids

Vak Pak Builders Supply stocks a

full line of replacement elements

& D.E. Grids for many

popular filters.

FC-9740 33850

33860

FC-9750

4

Pt. Number

20910 Pt. Number

20911

Base is now

1/2” MPT

Flowmeters

Part

Number

Description Part

Number

Description

20650 1 1/2” Blue White 82222 2” Digital Readout

20700 2” Blue White 82291 2-1/2” Digital Readout

20750 2 1/2” Blue White 82319

4” Digital Readout

20800 3” Blue White 83320 3” Remote Readout

20850 4” Blue White 82320 4” Remote Readout

20900 6” Blue White 20725 Mecomatic 2”

20905 8” Blue White 20915 Mecomatic 2 1/2”

20910* Chlorinator 1/2”

MPT

20920 Mecomatic 3”

20911 Chlorinator

W / 90 Both Ends 20930 Mecomatic 4”

209102 Base, 1/2” MPT For

20910

Mecomatic

Blue White

Battery Powered

Digital Readout

Battery Powered

Remote Readout

5

Vak Pak IG / IG3 Pumps

We also stock standard square & round flange pump

motors, from 1-HP to 3-HP.

“IG” and “IG3” Vak Pak’s “IG” and “IG3” cast iron centrifugal pumps have been designed for general

water recirculation. The motor is easily withdrawn by removal of accessible bolts, which

provide access to the impeller without disturbing existing piping.

“IG” The “IG” uses a standard 1750 RPM motor, and is available from 5 hp through 10 hp.

The IG pump comes with 4” FPT suction, and 3” FPT discharge ports.

“IG3” The “IG3” uses a standard 1750 RPM motor, and is available from 5 hp through 7.5 hp.

The IG3 pump comes with 3” FPT suction, and 2-1/2” FPT discharge ports.

6

“IG” and “IG3” Series Pump Curves

“IG-3” SERIES

“IG” SERIES

TO

TA

L D

YN

AM

IC H

EA

D I

N F

EE

T

CAPACITY IN U.S. GALLONS PER MINUTE

7

IG (4”x 3”) and IG3 (3”x 2-1/2”) Pumps

Model

Number

Replacement Pump

Description

38720 IG 5hp 1 phase

38722 IG 5hp 3 phase

38724 IG 7 1/2 hp 1 phase

38726 IG 7 1/2 hp 3 phase

38730 IG 10 hp 3 phase

38727 IG Pump End / Less Motor

Model

Number

Replacement Pump

Description

38704 IG3 5 hp 1 ph

38706 IG3 5 hp 3 ph

38708 IG3 7 1/2 hp 1 ph

38710 IG3 7 1/2 hp 3 ph

38729 IG3 Pump End / Less Motor

IG and IG3 Replacement Parts

Please Note: Pumps motors are available in straight 200V / 1PH., for an additional charge.

See page 8 for the complete listing of replacement parts.

8

Number Model Number Description

1 38578 Motor, 5 hp, 1 ph

1 38584 Motor, 5 hp, 3 ph

1 38590 Motor, 7 1/2 hp, 1 ph

1 38596 Motor, 7 1/2 hp, 3 ph

1 38606 Motor, 10 hp, 3 ph

2 38556 Motor Bracket, JM small bolt face

(5-HP 3-Phase Only)

2 38546 Motor Bracket, JM, IG/IG3

3 38522 Volute, IG 4” suction, 3” discharge

3 38524 Volute, IG3 3” suction, 2 1/2” discharge

3 38516 Volute Gasket

4 38536 IG Impeller (Need to specify flow rate or trim)

4 38530 IG3 Impeller, 9”

(Need to specify flow rate or trim)

4 38528 Impeller trim and balance

5 38504 Seal Kit, IG

6 29375 Impeller Bolt, ss, IG, 3/8” x 1

6 38518 Impeller Washer, ss, 3/8”

6 38505 Impeller Gasket, IG

7 38502 Shaft Sleeve, All IG / IG3 Pumps

7 38501 Shaft Sleeve Gasket, IG/IG3

7 38507 O-Ring, shaft sleeve, IG/IG3

8 29375 Capscrew, 3/8” x 1” ss

8 29604 3/8” Lock washer ss

9 29380 Capscrew, 1/2” x 1” ss

9 29610 1/2” Lock washer ss

10 14040 Plug, 1/4” brass

11 13950 Air Relief, 1/4” brass

12 14080 Plug, 1/2” brass

IG / IG3 Replacement Parts

9

Push Pull Valves & Replacement Parts


1 39420 4” Push Pull Valve Complete




2 38947 3” Internal Assembly





3 38949 3” Repair Kit, New Style





4 38948 3” Repair Kit, Old Style




5 38469 Pin W/Safety Cable

Vak Pak old style push pull valves used a 3/8”

stainless steel shaft, while the new style valves

use a P.V.C. shaft. Contact Vak Pak for

assistance when converting these valves.

****ALSO NOTE****

Be Sure To Specify When Ordering

Repair Kits

Old Style (S.S. Threaded rod - center shaft)

or

New Style (PVC center shaft)

10

Spin Valves

Part Number Description Ref #

39475 Spin Valve Assembly 10” 1

39485 Spin Valve Assembly 12” 1

82157 Handwheel 2

35756 Shaft Assembly 3

35754 Body Assembly 4

35757 Repair Kit 10” 5

35759 Repair Kit 12” 5

IMPORTANT NOTE: SPIN VALVES ARE INTENDED TO BE USED AS A REPLACEMENT ONLY FOR

VAK PAK SYSTEMS THAT UTILIZE THIS VALVE. VAK PAK, INC. IS NOT

RESPONSIBLE FOR THE FUNCTION OF THESE

VALVES IN ANY OTHER APPLICATION.

11

Part # Description

34364 4” Crank Style Repair Kit



Valves

Crank Style Valve Repair Kits

See Following Pages for Complete List of Valves Available

12

Valves Cont.

10149 HOSE BIBB, 1/2" MPT BRASS

10160 HOSE BIBB, 3/4" FPT BRASS

10150 HOSE BIBB, 3/4" MPT BRASS

23285 VALVE, BALL PVC 1/2"

23287 VALVE, BALL PVC 3/4"

23290 VALVE, BALL PVC 1"

10299 VALVE, BALL PVC 1-1/4"






09907 VALVE, PC 2-WAY 1-1/2"

09909 VALVE, PC 2-WAY 2-1/2"

09908 VALVE, PC 3-WAY 1-1/2"

09910 VALVE, PC 3-WAY 2-1/2"

09912 VALVE, PC 3-WAY 2-1/2 W/1.5 BS

Hose Bibbs

PVC Ball Valves

Praher 2-Way Valves

Praher 3-Way Valves

Pentair 2-Way Valves

263038 263038 VALVE, PF 2-WAY 1.5"

263029 263029 VALVE, PF 2-WAY 2.5"

13

263037 263037 VALVE, PF 3-WAY 1.5"

263028 263028 VALVE, PF 3-WAY 2.5"

09800 1157 VALVE, JANDY 2-WAY 1.5"

09830 2876 VALVE, JANDY 2-WAY 2.5"

09850 1154 VALVE, JANDY 3-WAY 1.5"

09860 2875 VALVE, JANDY 3-WAY 2.5"

09885 4724 VALVE, JANDY 2-WAY 1.5" NEVER




Valves Cont.

Pentair 3-Way Valves

Jandy 2-Way Valves

Jandy 3-Way Valves

Jandy 2-Way Neverlube

Jandy 3-Way Neverlube

263045 ACTUATOR, PENTAIR INTELLITOUCH

Actuators For 2 & 3-Way Valves

14

10512 02582 VALVE, BUTTERFLY 3" PVC AST




LARGER BUTTERFLY VALVES ARE AVAILABLE AS A SPECIAL ORDER

10482 9112S VALVE, CHECK PVC 1" SPRING

10484 9114S VALVE, CHECK PVC 1-1/2" SPRING

10485 9115S VALVE, CHECK PVC 2" SPRING

05340 1520-15 VALVE, CHECK PVC 1-1/2" SWING

05350 1520-20 VALVE, CHECK PVC 2" SWING



05425 1700C30 VALVE, CHECK PVC 3" TU/CL/SP

09900 7235 VALVE, JANDY CHECK 1-1/2"

09905 7305 VALVE, JANDY CHECK 2-1/2"

263042 263042 VALVE, PENTAIR CHECK 2" STRAIGHT

Spring Check Valves PVC

PVC Butterfly Valves

Valves Cont.

Swing Check Valves PVC

True Union Clear Spring Check Valves

Specialty Check Valves

Vak Pak stocks a wide selection of valves.

Can’t find what you’re looking for? Contact our parts dept.

15

FWLC

(Float Water Level Control)


1 38901 1/2” Complete Float Water Level

Control

1 38902 1” Complete Float Water Level

Control

2 39010 24” Float Tee with Balls

2

2

39020

39022

31” Float Tee with Balls

36” Float Tee with Balls

5 39040 10” Float Rod with coupling

6 39060 14” Float Rod with coupling

8 38880 1/2” Guide Tee with Cap

9 37200 Float Ball

10 39500 1” Aluminum float coupling

13 10100 1/2” Valve - only

14 10110 1” Valve - only

If you have any questions about the installation, or set-up of the FWLC, please contact

Technical Support, at our parts department.

16

RWLC

(Reservoir Water Level Control)

Ref.

Number

Model

Number

Description

1 38929 RWLC Float Assembly

1A 38906 Valve, Float Reservoir Assembly

2 38932 1” Diaphragm Valve With Pipe

3 26520 Diaphragm Valve Only 1”

4 38907 Valve, Replacement Reservoir

5 27170 1/4” O.D. Black Tubing

6 13850 1/4” Plastic Sleeve (Not Shown)

*** 38927 RWLC 1” Hydro Assembly Complete (includes reference #’s 1 - 6)

If you have any questions about the installation, or set-up of the RWLC, please contact

Technical Support, at our parts department.

17


1 38929 RWLC Float Assembly

1A 38906 Valve, Float Reservoir Assembly

2 38932 1” Diaphragm Valve With Pipe

3 26520 Diaphragm Valve Only 1”

4 38907 Valve, Replacement Reservoir

5 13850 1/4” Plastic Sleeve

6 27170 1/4” O.D. Black Tubing

*** 38927 RWLC 1” Hydro Assembly

Complete

(includes reference # 1, 2, 5 & 6)

Directions on Setting RWLC

Turn off the circulation pump, fill pool to desired level.

Loosen 1/2” compression nut (B) and slide reservoir up or down until the top rim of the

float chamber is just above the static water level.

Tighten the compression nut until secure.

Open the black diaphragm valve, counter clockwise, at least two (2) turns.

Press down on float ball in the float chamber.

Fresh water should begin to flow into the tank. When the float is released, the water flow

should stop.

RWLC Replacement Parts

18

Ref # Part # Description

1 35750 Element, 100 sq. ft. Dynapure

1A 35751 Element, 150 sq. ft. Dynapure

2 34540 DP, Element Core Holder

3 34340 Base, DP White

4 34490 Dome, DP White

5 34380 O-Ring, Tank Body

6 82167 Air Relief, DP Plastic W/O-ring (NEW STYLE)

6 13950 Brass Air Relief 1/4”

7 34360 Clamp, Dynapure, with Knob

8 34400 Tube, Air Relief DP Acrylic

* 82168 O-Ring Only, Plastic Air Relief

Dynapure Filter Replacement Parts

#6

#5

#4

#8

#2

#7

#3

#1

19

Vak Pak Inc.’s

Dynapure Pool Filter

Dynapure Pool Filters answer the need for low cost,

easy to operate filtration systems for residential and

commercial swimming pools.

Available in 100 & 150 Square Feet

Dynapure 100 & 150 Filter

Specifications:

Filter Model Model # Cartridge Filter

Capacity

Commercial

Flow

Rate

Filter

Area

DP100 34550 100GPM 37.5 GPM 100 SQ. FT.

DP150 34575 100 GPM 56 GPM 150 SQ. FT.

DP 100 DP150

20

D.E. Separation Tanks

Vak Pak 84-S.F. / D.E. Separation Tank

REF # PART # DESCRIPTION

* 34600 SEPARATION TANK COMPLETE

1 34491 DOME, 84SF SEPARATOR TANK

2 82182 BAG, 84SF SEPARATOR TANK

3 82183 INSERT, 84SF SEPARATOR TANK

4 34360 CLAMP, 84SF SEPARATOR TANK

5 34340 BASE, 84SF SEPARATOR TANK

* 34380 O-RING, TANK BODY

* 82167 AIR RELIEF WITH O-RING

* 82168 O-RING ONLY, AIR RELIEF

PARTS FOR OLDER SEPARATION TANKS

* 36015 O-RING, PENTAIR 40’ & 60’ SEP TANK

* 36020 BAG, PENTAIR 40’ SEPARATOR TANK

* 36030 BAG, PENTAIR 60’ SEPARATOR TANK

* 36010 CLAMP, PENTAIR 40’ & 60’ SEP TANK

Vak Pak Inc.

manufactures the

largest capacity

Separation Tank

in the industry.

21

Chlormatic / Bromatic Feeder Parts

Ref. No. Part Number Description

1 34930 Screw Cap

2 33871 O-Ring, Cap

3 20910 Chlorinator Flowmeter. 1/2” MPT

4 03600 Coupling, Threaded 1/2”

5 13830 Adapter, 1/2” Tubing x 1/2” MPT



6 13765 Tubing, 1/2” O.D. Black (Per Ft.)

6 13762 Tubing, 3/8” O.D. Black (Per Ft.)

7 13665 Valve, Inlet 1/2” FPT

7 10655 Calibrated Inlet Valve, 1/4” MPT x 1/4” FPT

8 05687 Nipple, 1/2” x CLS P.V.C.

9 10650 Valve, Drain 1/4” MPT x Hose Barb

Not Pictured 13655 Tubing, 1/2” O.D. Clear Flexible For Drain Valve ( Per Ft.)

If you are in need of a complete chlorine feeder, please contact us.

We offer erosion feeders from several manufacturers, in varying capacities.

Vak Pak is no longer producing the Chlormatic and Bromatic feeders. Replacement parts are still available.

The picture, (below left), was the latest body style used, and parts are readily

available. If you have any questions, please give us a call.

Please note: Inline check valves have been totally eliminated.

Some parts shown are for earlier models, in which different size tubing

and connections were used.

**

22

Controllers

Model Number Description

82093 Controller, BCES MR-1F CES

19246 Controller, Chemtrol 250

19235 Controller, CAT 2000

Chemical Feeders

Model Number Description

32450 FEEDER STENNER, 45M2




Chlorine And PH Controllers & Feeders

Please Note: Vak Pak has used several different manufacturers of ORP

controllers, and chemical feeders. This represents the most popular models in current

production. Warranty service and parts are generally handled by the manufacturer

direct. However, if you do not see the model of your unit, or if non-warranty

replacement parts are needed, please contact us for assistance.

23

Remote Chemical Crocks

Part # Description

42730 15-Gallon Remote Chemical Crock




Since ORP Controllers and liquid feeders have become more prominent, chemical

storage containers have also become necessary. Vak Pak Manufacturing offers 4

sizes of Remote Chemical Crocks to fit your needs. They come with a lockable lid

for security and may be buried out of the way for convenience.

Please Note: Make sure when ordering to specify chlorine or acid.

24

Vak Pak Inc. Cabinet Listing By Model Number

Model Number Cabinet Number Model Number Cabinet Number

CP6VDE CB402 CS52PCV CB502

Through “ Through “

CP14VDE “ CS100PCV “

AP14VDE CB502 SP140VCT CB602


AP22VDE “ SP400VCT “

AP10 CB602 SP500VCT CB1002

Through “

AP30 “ CHR24 CB602

AP32 CB1002 Through “

Through “ CHR36 “

AP40 “ CHR230 CB1002

AP44 CB1402 Through “

AP52 “ CHR236 “

Through “

AP56 “

AP60 “ RDE205 CB202


AP80 “ RDE215 “

RDE405 CB402

CS189V CB602 Through “

Through “ RDE415 “

CS540V “ RC205 CB202

CS680V CB1002 Through “

CS52WPCV CB402 RC215 “

Through “ RC405 CB402

CS100WPCV “ RC415 CB402

Vacuum D.E.

Pressure Cartridge

Pressure Cartridge Cont’d

Pressure Sand Filter

Residential

25

Cabinet Parts

Hardware For Old Style Cabinets / Lids

Part Number Description

37100 Roof Jacks, 712 - AA

37170 Safety Cable, For Roof Jack

23700 Hinge, 3”x 3” , S.S. (Sold Each)

27020 Hardware Kit, 3”x 3” Hinges (Per hinge)

27015 Hardware Kit, For Roof Jacks (Per Roof Jack)

Hardware For New Style Cabinets / Lids


37130 100-lb Hydraulic Lifters (Used Primarily on Subterranean Vaults)

37125 90-lb Hydraulic Lifters



23730 Latch Assembly Complete

23702 Hinge, 3”x 3” S.S. Heavy Duty (Sold Each)

38913 Mounting Bracket W/Ball Stud

37111 Clip Retainer, For Ball Stud

27020 Hardware Kit, 3”x 3” Hinges (Per Hinge)

37118 Hardware Kit (30-90-LB Per Roof Jack)

37119 Hardware Kit (100-LB Per Roof Jack)


37050 Grille, 10”x 10”

37000 Grille, 24”x 10”

Grilles

26

Cabinet and Lid Part Numbers

New Style Cabinets “02” Series

Cabinet Model

Number

Cabinet Part

Number

Lid Part Number Hydraulic Lifter

Part Number

CB104 41240 41280 37100

CB202 41385 41422 37110

CB402 40465 40375 37120

CB502 45523 40382 37120

CB602 40342 40375 37120

CB1002 40850 40890 37125

CB1402

40843 40375

40890

37125

37120

CB1702

40844 40375

40890

37125

37120

Old Style Cabinets “00” Series

Cabinet Model

Number

Cabinet Part

Number

Lid Part Number Roof Jack Part

Number

CB104 41240 41280 37100

CB200 USE CB202 41420 37100

FILTERPAK 41890 41920 37100

CB400 USE CB402 40380 37100

CB600 USE CB602 40380 37100

CB1000 USE CB1002 40880 37100

27

CB1702

Cabinet Specifications

(Requires 90 & 60-LB Roof Jacks. See Pages 25-26 For Parts)

201”

39

..5”

79”

28

CB1402


(Requires 90 & 60LB Roof Jacks. See Pages 25-26 For Parts)

76” 79”

161”

39

.5”

39

.5”

29

CB1002


(Requires 90-LB Roof Jacks. See Pages 25-26 For Parts)

30

CB1000 (Old Style)


(Requires Standard #37100 Roof Jacks. See Pages 25-26 For Parts)

31

CB602



32

CB600 (Old Style)



33

CB502



34

Filterpak



Please Note: This Cabinet Is No Longer Used in Current Production,

However, Parts Are Still Readily Available.

35

CB402



36

CB400 (Old Style)



37

CB104



CB200 (Old Style)

Cabinet Specifications (Requires Standard #37100 Roof Jacks. See Pages 25-26 For Parts)

38

CB202



LOCKABLE

ACCESS

Low Profile Collector Tank Lid Specifications

Fits: CT120LP / CT140LP / CT200LP / CT300LP

39

CT-60

Cabinet Specifications Order Part # 45013

COLLECTOR TANK

SKIRT

Set your collector tank to proper static water level, regardless of grade. The

skirt can be custom made to your height specs,

from 3” to 24”. It can also be ordered later and easily installed in the

field at any time.

Order part # 41423, and specify your height

requirements.

Cabinet Identification Vak Pak changed cabinet styles in 2002. All new style cabinet designations end in “02”,

(E.G. CB402 / CB602 Etc.). The drawings below show the difference in the new style “02”

lids, and the old style designated as “00” lids or cabinets, (E.G. CB400 / CB600 Etc.).

40

Since the early 1970’s, Vak Pak Inc. has been manufacturing quality

fiberglass, sand coated main drain forming shells for commercial and

residential use. Our easy to use, VGB compliant product is available in many

standard sizes and configurations, as well as custom designs, made to your

specifications. Drains can be made with either slip, or threaded fittings.

We stock many VGB frame & grates to fit not only our drains, but the

majority of the main drains you are using. Our main drains are available in

beige or black. If you have any questions, or would like to place an order,

please contact our parts department for assistance.

Main Drains - VGB Compliant

CMD 9/3/2 Main Drain - VGB Compliant

PART # DESCRIPTION

42340 CMD MAIN DRAIN, 9/3/2

42360 CMD MAIN DRAIN, 9/3/3/2

41

Main Drains - VGB Compliant, Contd.


PART # DESCRIPTION


42400 CMD MAIN DRAIN, 12/4/4/2


PART # DESCRIPTION


42

Main Drains - VGB Compliant, Contd.

CMD 18/8/2+2 Main Drain - VGB Compliant

18-1/2”

23”

13”

17”

25”

Over the years we have received many questions concerning the use of a square frame & grate on

a round main drain. As you can see below, examples 1 & 3, show a perfectly straight, plumbed

suction line. Examples 2 & 4, however, show us the all to familiar, slightly offset plumbing line.

With the round main drain, example 2, you can easily adjust the frame & grate, and remain

square to the overall layout of the pool. With a square main drain, as example 4 shows, the frame

& grate has little, or no adjustment. ( Exaggerated drawing for illustration only)

Parallel to pool wall.

PART # DESCRIPTION

42460 CMD MAIN DRAIN, 18/8/2+2

43

Main Drain Identification

Vak Pak Manufacturing produces many different types of VGB compliant main

drains, from our standard products, usually in stock and ready for immediate

shipment, to custom main drains, built to your specifications. In order to make it

easier for you to order and receive exactly what you need, we would like to explain

our model number designations. There are three basic size main drains, 9”, 12”,

and 18”. When ordering, the first number is the size of the drain, (E.G. 12/), for a

12” drain. The second number indicates the side outlet, (E.G. 12/4), which is a 4”

fitting. The third number indicates the bottom outlet fitting, (E.G. 12/4/2), which is

2”. The exceptions to this being if 2 outlets are required on the side of the drain,

this number would read, 12/4/4/2, and if there are more than one bottom fitting, it

would read, 12/4/4/2+2. We have put together several examples of standard and

also custom main drains below.

As you can see, the model number designations are fairly

simple. Main drain size, side outlet, and bottom port. These are

just a few of the possibilities for customized drains. Also

remember, any of these drains can be made with couplings,

(all slip), or female adapters, (slip x thrd), or in any

combination of the two. If you have any questions, need a quote

on a custom design, or are ready to order, simply contact our

parts department for assistance.

44

VGB Compliant Grates and Unblockable Drains

Vak Pak Builders Supply has you “covered” when it comes to VGB

approved main drain covers and unblockable drains. With

manufacturers like Waterway, A & A Manufacturing, Aquastar,

and Custom Molded Products, we have what you need.

We stock everything from the 8” residential drains & grates, up to 18”x 18”.

24”x 24” grates are available on a special order basis.

45

Prices are subject to change without notice unless a quote has been made. Quotes from the Builder

Supply Store are good for 90 days. All prices are F.O.B. our warehouse and custom orders are F.O.B.

point of origin. Prices are subject to applicable sales and/or use taxes unless customer has on file

with Vak Pak, and up to date tax exemption certificate.

Customers, with approved open accounts, may take a 1.5% discount if paid by the 10th. of the month,

following invoice date. A 1.5% service charge per month or portion thereof on all past due accounts. Past

due status will cause delivery of shipment to be withheld on any new or outstanding orders.

All parts orders MUST be prepaid, either with a credit card, or check in advance,

if you do not have an established account with Vak Pak. We do not ship C.O.D.

Seller’s responsibility ceases when merchandise is turned over to a common carrier. Damages or

shortages must be reported to delivery carrier immediately upon receipt and so noted on Bill of Lading

before acceptance of shipment is made. Otherwise, no claim can be enforced against

the Deliverer, Carrier, or the Seller.

All shortage claims must be reported within 48 hours.

Merchandise MAY NOT BE returned without prior authorization. Merchandise returned is subject to

inspection and a 15% restocking charge, providing the returned merchandise is in original condition.

Special freight charge may apply.

Equipment or accessories not manufactured by Vak Pak will carry only warranty furnished by the

manufacturer. Vak Pak will act as an agent for purchasers to obtain warranty from said manufacturer,

but Vak Pak will not warranty or be held liable for said products warranty. Equipment or accessories

manufactured by Vak Pak carry a 12 month warranty from date of shipment.

Terms and Conditions

Pricing

Terms

Damaged or Shortage Claims

Returned Merchandise

Warranty

46

INDIAN RIVER PLACE

THE FIRST VAK PAK EVER SOLD.

The first Vak Pak ever sold was installed in 1970, by

Vero Beach Pools. As of December, 2013, it was still in

operation. We are trying to put together data on the

average life of a Vak Pak, but after 40 years, and the

first unit is still going strong, it may take us a while.

Vak Pak Replacement Parts Catalog · Vak Pak Replacement . Parts Catalog . 2 . Page #’s. Contents...

Documents

Transcript of Vak Pak Replacement Parts Catalog · Vak Pak Replacement . Parts Catalog . 2 . Page #’s. Contents...