Solid Core Wood Door / Steel Frame Packages
Transcript of Solid Core Wood Door / Steel Frame Packages
Hass Wholesale Commercial
Commercial
Page C-1 010109
Solid Core Wood Door / Steel Frame Packages
No Label - Interior Packages
Machined for one (1) cylindrical lock and three (3) hinges at Republic locations
1-3/4” Solid Core Birch 1-3/4” Solid Core Oak
3/0 x 79-1/4” Machined Slab 3/0 x 79-1/4” Machined Slab
Set of Ball Bearing US26D Hinges Set of Ball Bearing US26D Hinges
MH578/478 - 3/0 x 6/8 DW Frame MH578/478 - 3/0 x 6/8 DW Frame
$ 342.75 $ 349.40
1-3/4” Solid Core Birch 1-3/4” Solid Core Oak
3/0 x 83-1/4” Machined Slab 3/0 x 83-1/4” Machined Slab
Set of Ball Bearing US26D Hinges Set of Ball Bearing US26D Hinges
MH578/478 - 3/0 x 7/0 DW Frame MH578/478 - 3/0 x 7/0 DW Frame
$ 361.55 $ 368.55
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Hass Wholesale Commercial
Commercial
Page C-2 010109
Fire Rated Wood Door / Steel Frame Packages
20 or 90 Minute Label - Interior Packages
Machined for one (1) cylindrical lock and three (3) hinges at Republic locations
20 Minute Birch 20 Minute Oak
3/0 x 79-1/4” Machined Slab 3/0 x 79-1/4” Machined Slab
Set of Ball Bearing US26D Hinges Set of Ball Bearing US26D Hinges
MH578/478 - 3/0 x 6/8 DW Frame MH578/478 - 3/0 x 6/8 DW Frame
$ 360.75 $ 367.40
3/0 x 83-1/4” Machined Slab 3/0 x 83-1/4” Machined Slab
Set of Ball Bearing US26D Hinges Set of Ball BearingUS26D Hinges
MH578/478 - 3/0 x 7/0 DW Frame MH578/478 - 3/0 x 7/0 DW Frame
$ 379.55 $ 386.55
90 Minute Birch 90 Minute Oak
3/0 x 79-1/4” Machined Slab 3/0 x 79-1/4” Machined Slab
Set of Spring US26D Hinges Set of Spring US26D Hinges
MH578/478 - 3/0 x 6/8 DW Frame MH578/478 - 3/0 x 6/8 DW Frame
$ 601.10 $ 611.80
3/0 x 83-1/4” Machined Slab 3/0 x 83-1/4” Machined Slab
Set of Spring US26D Hinges Set of Spring US26D Hinges
MH578/478 - 3/0 x 7/0 DW Frame MH578/478 - 3/0 x 7/0 DW Frame
$ 624.15 $ 635.40
20 Minute Birch 20 Minute Oak
90 Minute Birch 90 Minute Oak
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Hass Wholesale Commercial
Commercial
Page C-3 010109
Steel Door / Steel Frame Packages
Supplied with 90 minute mylar label - Exterior Packages
3/0 x 6/8 3/0 x 7/0
Hollow Metal Door Hollow Metal Door
Set of Non-Removable Pin USP Hinges Set of Non-Removable Pin USP Hinges
ME534 - 3/0 x 6/8 Frame ME534 - 3/0 x 7/0 Frame
Punch & Dimple w/ anchors & bolts Punch & Dimple w/ anchors & bolts
321CN-36” Door Sweep 321CN-36” Door Sweep
303AV - 3/0 x 7/0 Weatherstrip 303AV - 3/0 x 7/0 Weatherstrip
171A-36” Threshold 171A36” Threshold
$ 774.15 $ 792.65
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Commercial
Page C-4 010109
Hass Wholesale Commercial
This Page is not in Use
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Hass Wholesale Commercial
Commercial
Page C-5 010109
1-3/4” Fire-Rated 20 Minute Interior Prehung Door Units
ALL DOORS on this page must be machined and labeled by Hass Wholesale
to carry a valid rating! In order to meet code requirements, each door must be machined
for three (3) hinges and one (1) cylindrical lock!
Hass Wholesale is licensed by Intertek Testing Services. A licensed company must do ALL
machining of 20 minute wood doors and frames and 90 minute wood doors. All prep and labeling
must be in compliance with Federal NFPA-80. Hass Wholesale is required to log all products
that are prepped and labeled in our facility. ANY ALTERATIONS made to the doors and/or frames
after shipment are the SOLE RESPONSIBILITY OF THOSE PERSONS MAKING THE
ALTERATIONS and will VOID THE LABEL!
5-1/4” Pine 20 Minute Jamb with smoke stop
3 Round Corner 4 x 4 US4 Spring Hinges
Machined for one (1) cylindrical lock
OPTIONS ADD
Rip Jamb Width 15.00
4-7/8” Oak 20 minute Jamb 137.00
4-1/2 x 4-1/4 US26D Spring Hinges / Set of 3 26.75
Size Birch Oak
20 minute 20 minute
2/6 x 6/8 $ 298.30 $ 308.85
2/8 x 6/8 301.50 311.50
3/0 x 6/8 306.00 317.20
2/6 x 7/0 303.90 314.55
2/8 x 7/0 307.10 317.20
3/0 x 7/0 311.60 322.85
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Commercial
Page C-6 010109
Hass Wholesale Commercial
1-3/4” Fire-Rated 20 & 90 Minute Door Interior Slabs
ALL DOORS on this page must be machined and labeled by Hass Wholesale
to carry a valid rating! In order to meet code requirements, each door must be machined
for three (3) hinges and one (1) cylindrical lock!
Hass Wholesale is licensed by Intertek Testing Services. A licensed company must do ALL
machining of 20 minute wood doors and frames and 90 minute wood doors. All prep and labeling
must be in compliance with Federal NFPA-80. Hass Wholesale is required to log all products
that are prepped and labeled in our facility. ANY ALTERATIONS made to the doors and/or frames
after shipment are the SOLE RESPONSIBILITY OF THOSE PERSONS MAKING THE
ALTERATIONS and will VOID THE LABEL!
All Doors listed below include machining for one (1) cylindrical lock with
2-1/8” face bore and three (3) hinge pockets at Republic locations
All Doors listed below include the label with a rating of 20 or 90 minute
Prep for Special Commercial locations - ADD 41.00
(one (1) cylindrical lock and three (3) hinge pockets only)
Size Birch Oak
20 minute 20 minute
2/6 x 79-1/4” $ 150.35 $ 156.55
2/8 x 79-1/4” 152.80 158.50
3/0 x 79-1/4” 156.15 162.80
2/6 x 83-1/4” 163.35 169.90
2/8 x 83-1/4” 165.80 171.85
3/0 x 83-1/4” 169.25 176.25
90 minute 90 minute
3/0 x 79-1/4” $ 378.65 $ 389.35
3/0 x 83-1/4” 396.00 407.25
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Hass Wholesale Commercial
Commercial
Page C-7 010109
Commercial Steel Door Slabs
“DM” Series Flush Doors
Apply 20 or 90 minute to above door - ADD 18.00 (wire glass must be used in fire doors)
For Metal Vision Panel and Glass ONLY—Deduct 40.00
These are all-purpose doors in 18 gage cold-rolled steel. Lock edge is continuously lap seam
welded and planished (McKenzie Edge), providing a nearly seamless and indestructible edge.
Standard Features:
• 3/4” cell honeycomb core 100% bonded to skins to provide exceptional strength, flatness and
acoustical performance
• Continuous flush, 16 gage top and inverted bottom channels projection welded to both face
sheets every 2-1/2” on center
• Hinge edge is non-beveled and reinforced with a continuous 16 gage channel projection
welded to each skin at a maximum of 5” on center. Hinge channels have an additional 9 gage
reinforcement at each hinge location, providing over 3/16” reinforcement.
• Doors are thoroughly cleaned, phospatized and primed with a coat of force-cured rust
inhibiting primer.
3/0 x 6/8 x 1-3/4 Flush Slab - 18 gage $ 468.90
3/0 x 7/0 x 1-3/4 Flush Slab - 18 gage 482.60
Size w/ 1/4” tempered glass w/ 1/4” wire glass
4 x 25 metal vision panel installed $ 124.75 $ 162.00
5 x 20 metal vision panel installed 120.75 158.00
10 x 10 metal vision panel installed 115.80 153.05
22 x 28 metal vision panel installed 168.90 230.95
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Hass Wholesale Commercial
Commercial Steel Frames
Standard Frame Drywall Frame
“ME” is a Butted Application Frame
“MH” is a Slip-On Drywall Application Frame
ADD
Punch & Dimple with 6 each Butterfly Anchors and Dynabolts or Screws $ 70.60
4” Face Head Jamb (ME Frame Only) 25.00
• ME/MH Series Frames are formed from 16 gage cold-rolled steel. Frames are knocked-
down. Knockdown corners have aligning tabs and slots for secure, easy interlocking of jambs
to head.
Standard Features:
• Frames are provided with 9/32” silencer preparation, (3) per strike jamb and (2) per head for
double openings for field application after finish painting. Frames for 1-3/4” doors shall have
9 gage steel universal hinge tap plate projection welded with provisions for 4-1/2” x 4-1/2”
template type hinges and 14 gage strike reinforcement plate, extruded and formed to the
equivalent of 10 gage, projection welded with provision for 4-7/8” ASA strike.
“ME” Frame Rough Opening = Width=Door Opening Width + 4-1/2”
Height = Door Opening Height +2-1/4”
“MH” Frame Rough Opening = Width = Door Opening Width + 2”
Height = Door Opening Height + 1”
Commercial
Page C-8 010109
Size ME534 MH578/478
3/0 x 6/8 $ 148.00 $ 174.10
3/0 x 7/0 152.80 179.80
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Hass Wholesale Commercial
Commercial
Page C-9 010109
Misc. Products
Product
S14629P Cylinder Edge Filler Plate $ 2.50
554P Mortise Edge Filler Plate 3.60
560P Cylindrical Face Filler 3.60
SP478 Strike Filler Plate 2.50
HFP45R Hinge Filler Plate 2.00
HSP45 Hinge Shim 2.00
WMA Wire Masonry Anchor 1.60
MT534 Masonry “T” Anchor 2.05
WS534 Wood Stud Anchor 2.70
EO Existing Opening Anchor 3.00
Dynabolt 4.60
5” Wood Screw 4.60
FFA534 Fixed Floor Anchor 3.10
CR Closer Reinforcement 22.80
SPGA Strike Plaster Guard 3.40
RM Rubber Mute 0.10
#8 x 5/8” Head Screw 0.10
Sill-Strap Anchor 1.60
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Hass Wholesale Commercial
Commercial
Page C-10 010109
Commercial Hinges
Misc. Commercial Hardware
Size Finish
Plain Bearing 4-1/2 x 4-1/2 US26D - Dull Chrome $ 7.15
Ball Bearing 4-1/2 x 4-1/2 US26D - Dull Chrome 7.80
Spring 4-1/2 x 4-1/2 US26D - Dull Chrome 13.75
Non-Removable Pin 4-1/2 x 4-1/2 USP - Primed 6.95
Plain Bearing 4-1/2 x 4-1/2 US4 - Dull Brass 7.15
Ball Bearing 4-1/2 x 4-1/2 US4 - Dull Brass 7.95
Spring 4-1/2 x 4-1/2 US4 - Dull Brass 14.40
Description
3-1/2” x 15” Push Plate US32D $ 15.30
3-1/2” x 15” Pull Plate US32D 52.80
8” x 34” Kick Plate US32D 40.30
US26D Concave Wall Stop 5.35
US26D Floor Stop 7.25
12” Manual Extension Flush Bolt US26D 25.40
8” Surface Bolt US26D—UL Listed 29.20
3” x 11” Latch Guard US32D 25.90
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Hass Wholesale Commercial
Commercial
Page C-11 010109
Weatherization Products
Model Size Description
321CN 36” Door Bottom Sweep $ 14.60
321CN 48” Door Bottom Sweep 19.40
303AV 3/0 x 7/0 Bulb Weatherstrip 22.20
303AV 6/0 x 7/0 Bulb Weatherstrip 26.10
S88D 17’ SiliconSeal Weatherstrip 24.80
S88D 21’ SiliconSeal Weatherstrip 30.60
171A 36” Saddle Threshold 28.70
171A 72” Saddle Threshold 57.40
181AV 36” LatchingPanic Threshold 35.60
181AV 72” LatchingPanic Threshold 71.20
18041CNB 84” Brush Astragal Strip 24.65
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Hass Wholesale Commercial
Commercial Hardware
Commercial
Page C-12 010109
Surface Door Closer $ 110.00
Single Cylinder Deadbolt 51.80
Entry/Office Lever 89.70
Privacy Lever 82.75
Passage Lever 81.00
4-7/8” ASA Strike US4 Dull Brass or US26D Dull Chrome 5.00
Rim Panic Exit Device Only 164.50
Fire-Rated Rim Panic Exit Device Only 199.50
Vertical Rod Panic Exit Device Only 318.15
Fire-Rated Vertical Rod Panic Exit Device Only 357.80
Entry Lever for Panic Device 100.75
Passage Lever for Panic Device 100.75
Offset Pull Only 14.35
Offset Pull with Cylinder Hole Only 15.65
Rim Cylinder Only 21.25
**Keying Charge per Cylinder 19.00
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Hass Wholesale Commercial
Commercial
Page C-13
COMMERICAL QUOTE REQUIREMENTS
ALL QUESTIONS MUST BE ANSWERED FOR AN ACCURATE QUOTE!
Door Size: ______________________Door Thickness: 1-3/8” or 1-3/4”
Door Type (Hollow Metal, Hollow or Solid Core Wood): ______________________
Door Style (Specie and Style): ______________________________________
Rating: Non-Rated - 20 minute - 60 minute - 90 minute
Frame Size and Design (3 piece KD or Welded): ____________________
Frame Depth or Wall Thickness: _________________________________
Frame Type: Flat Wood - Rabbetted Wood - Drywall or Standard Steel
Frame Anchor (If Required): Existing Opening with Dynabolt or Wood Screw
Hardware Finish: US26D or US4 or US3 or US10B or Other _________
Hinges: Plain or Ball Bearing, Spring or Non-Removable Pin
Lock: Key, Privacy or Passage - Lever or Knob
Panic: Rim Panic or Vertical Rod Panic
Does the Opening require any of the following:
Closer, Sweep, Weatherstrip or Threshold
Opening Number and Swing (RH or LH): _________________________
______________________________________________________________
______________________________________________________________
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Hass Wholesale Commercial
COMMERCIAL DOOR HANDING CHART
Commercial
Page C-14
* = Key Side of Door
RH and LH symbols indicates “Swing In” operation for single and
double swing doors.
The hand and swing symbols for double swing doors are suffixed
with “A” to indicate the ACTIVE LEAF of the pair of doors.
RHR and LHR symbols indicates “Swing Out” operation for single
and double doors.
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com