SER 158...Thanks to VELP Ermes connection is possible to monitor the analysis and be notiied,...

SER 158

Safe Solid-Liquid Extractor for a Variety of Applications

Automatic Solvent Extractor

SER 158 Solvent AutoExtractor

CONFIGURATIONS

Solvent extraction with the SER 158 can be performed for extractable matter determination on a wide range of sample matrices either in

food and non-food industries (such as pulp, paper, textile, chemical etc...) and for sample preparation. The solid-liquid extraction process

removes the soluble components from solids using a liquid solvent. The SER 158 works in accordance to international standards such as

AOAC, ISO, EPA, APHA, UNI.

FAST EXTRACTION

The automatic extraction process completes fully unattended analysis according

to the Randall method that is five times faster than traditional Soxhlet. The high-speed heating plates in glass-ceramic ensure fast solvent boiling.

MINIMUM SOLVENT CONSUMPTION

The patent pending titanium condensers guarantee the unparalleled solvent

recovery of more than 90% that is collected in cooled recovery tank.

HIGH PRODUCTIVITY & VERSATILITY

The powerful ControlPad is able to control up to 4 SER 158 units

(3 or 6 positions) independently allowing to increase the number of units

according to throughput requirement.

MAXIMUM SAFETY

SolventXpress™ ensures zero exposure to solvents

SafeEnd™ prevents the overheating and burning of soluble matter

Remote analysis interruption and immediate notifications trough VELP Ermes

EASE OF USE

The SER 158 Series makes hot solvent extraction easy and fast:

Preset library of methods and possibility to add new ones and mark

preferred methods

Multilingual support

Balance connection for automatic result calculation

Barcorde reader to reduce risk of errors

SMART INSTRUMENT

The SER 158 is designed to work unattended 24/7 with Load&Go technologies, minimizing necessary operator intervention.

Thanks to VELP Ermes connection is possible to monitor the analysis and be notified, anytime, anywhere.

SER 158/3 SER 158/3

no ControlPad

SER 158/6 SER 158/6

no ControlPad

The analysis consists of up to 5 steps to ensure a complete sample extraction

The sample is immersed in boiling solvent for

an effective defatting action.

1 IMMERSION

More than 90% of the solvent is recovered in

the internal recovery tank.

4 RECOVERY

The level of solvent is automatically lowered

below the extraction thimble. Part of the solvent is

collected in the recovery tank, the rest continues

to flow through the sample.

2 REMOVING

The heaters are switched-off and the cups containing the extracts are automatically lifted

to prevent burning of the extracted matter.

5 COOLING

The condensed solvent flows over the sample and through the thimble to complete the

extraction process.

3 WASHING

VELP ERMES CONNECTION

Fully Automatic Extraction Process

Connect the SER 158 to the exclusive VELP Ermes Cloud Platform to improve your laboratory experience. The VELP Ermes Cloud Platform connection will unburden you from tedious tasks improving your lab productivity.

Real time monitor and control of the instrument from PC, smartphone and tablet

whenever you want, wherever you are

Immediate alert and notification with the possibility to stop the instrument for maximum safety

Regular software updates will guarantee the best performance and new features with

just one-click

MONITOR AND CONTROL ANYTIME, ANYWHERE

TIME, ENERGY, MONEY, SPACE SAVING

TIME SAVING: Fast solvent addition, easy analysis set-up, one-click start function.

ENERGY SAVING: Heaters are independent, limited water consumption.

MONEY SAVING: More than 90% solvent recovery and reduced extraction time.

SPACE SAVING: Extremely compact footprint saves bench space.

MAXIMUM PRODUCTIVITY AND VERSATILITY

INSTRUMENT - CODE

SER 158/3 115-230 V / 50-60 Hz S303A0390

SER 158/6 115-230 V / 50-60 Hz S303A0380

SER 158/3 no ControlPad 115-230 V / 50-60 Hz F303A0390

SER 158/6 no ControlPad 115-230 V / 50-60 Hz F303A0380

* Included only in codes S303A0390 and S303A0380

The SER 158 can be supplied with or without ControlPad.

All configurations already include a set of accessories that can be used for the most common industries and applications. Optional accessories are available on request.

SUPPLIED WITH

A00000286*ControlPad

A00000297Green viton seal SER158

3pcs/box

A00000312Extraction

thimbles holder

Ø 33mm

A00000295Cellulose thimbles

33x80mm,

25pcs/box

E00010012VELP Ermes 1 Year Connection

10002866Teflon tube Ø 4x6mm

A00000305Boiling stones,

30g

10000280Inlet water

tube

10006054Connection 1/8

NPT - tube 6x4

A00000298Grey butyl seal SER158

3pcs/box

A00000290Extraction cup

Ø 56x120mm

3pcs/box

FOOD, FEED AND BEVERAGE INDUSTRY PHARMACEUTICAL AND CHEMICAL INDUSTRYENVIRONMENTAL INDUSTRY

The SER 158 Series is ideal for the determination of crude and total fat content and for sample preparation aimed at the extraction of pollutants and

contaminants according to the Randall technique.

OPTIONAL ACCESSORIES

White vaflon seal SER158 3pcs/box A00000288

Green viton seal SER158 3pcs/box A00000297

Grey butyl seal SER158 3pcs/box A00000298

Extraction cup Ø 48x120mm 3pcs/box A00000303



Extraction cup STD aluminium 3pcs/box A00000361

Extraction thimble holder Ø 25mm A00000291

Extraction thimble holder Ø 33 mm A00000312

Extraction thimble holder Ø 40mm A00000292

Cellulose thimbles 25x80mm, 25pcs/box A00000294



Glass fiber thimbles 25x80mm, 25pcs/box A00000314



Thimble weighing cup A00000310

Thimbles stand 6 places A00000311

Handling device extraction cups SER158/6 A00000304

Crucible holder HU 6 for SER158 A00000293

Complete Glass bottle solvent collection A00000301

Inlet Connection1/4NPT-tube Ø 4,3÷4,5mm A00000299

Inlet Connection 1/4NPT-tube Ø4,8÷5mm A00000300

Barcode scanner with USB socket A00000364

Wireless barcode scanner A00000365

Slave connection cable A00000287

Adapter USB-RS232 A00000195

Extension lead 2m for ControlPad A00000315

IQ/OQ SER158 A00000306

Boiling stones, 30g A00000305

Oat meal, 30g A00000318

VELP Ermes 1 Year Connection E00010012

VELP Ermes 3 Year Connection E00010036

FIELDS OF APPLICATION

AOAC ISO EPAAPHA UNI

GLP Good Laboratory Practice

TECHNICAL DATA

POSITIONS 3 positions 6 positions

MAXIMUM CAPACITY 21 samples/day/unit 42 samples/day/unit

SCALABILITY 12 positions (up to 4 units) 24 positions (up to 4 units)

SOLVENT VOLUME up to 200 ml up to 200 ml

DISPLAY 7” color touch screen - extractable ControlPad 7” color touch screen - extractable ControlPad

SOLVENTS ACCEPTED Capable of being used with the majority of solvents Capable of being used with the majority of solvents

SOLVENT RECOVERY > 90% > 90%

MEASURING RANGE 0.1 - 100% 0.1 - 100%

RSD ≤ 1% ≤ 1%

ACCURACY According to officially approved methods According to officially approved methods

AUTOMATION Immersion, Removing, Washing, Recovery, Cooling Immersion, Removing, Washing, Recovery, Cooling

LIGHTING LED showing active positions LED showing active positions

HEATING ELEMENT Glass ceramic - positions independent switch on/off Glass ceramic - positions independent switch on/off

TEMPERATURE RANGE Room temperature - 300 °C Room temperature - 300 °C

SAMPLE SIZE 0.5 to 15 g (generally 2-3 g in 33x80 mm thimbles) 0.5 to 15 g (generally 2-3 g in 33x80 mm thimbles)

SEALS Viton, Butyl, and Vaflon Viton, Butyl, and Vaflon

CONDENSERS Titanium (VELP Patent Pending) Titanium (VELP Patent Pending)

CONNECTIVITY Cloud via LAN Cloud via LAN

INTERFACES 3 x USB (balance, mouse, USB stick), Ethernet (Pc) 3 x USB (balance, mouse, USB stick), Ethernet (Pc),

BARCODE READER CONNECTION Yes Yes

RESULT CALCULATION Automatic, archived on the ControlPad Automatic, archived on the ControlPad

WATER CONSUMPTION From 1.0 l/min From 1.0 l/min

DIMENSIONS (WxHxD) 358x546x450 mm

14x21,5x17,7 in

546x546x450 mm

21,5x21,5x17,7 in

DIMENSIONS WITH CONTROLPAD 358x546x570 mm

14x21,5x22,4 in

546x546x570 mm

21,5x21,5x22,4 in

WEIGHT (SER 158/CONTROLPAD) Kg 29 / 1

64 / 2,2 lb

Kg 36 / 1

80,3 / 2,2 lb

POWER SUPPLY 115/230 V - 50/60 Hz 115/230 V - 50/60 Hz

POWER CONSUMPTION 630/850 W 630/850 W

SER 158/3 SER 158/6

VELP Scientifica products are designed by our engineers to resist years of laboratory use.

Our products are manufactured with premium materials to guarantee the best performance with maximum safety.

According to our experience, a proper and regular maintenance is necessary to ensure the highest performance of analytical instrument. VELP Service Department and VELP Official Partners are always ready to offer you maintenance and service support tailored to your needs.

SERVICE & SUPPORTGET THE SUPPORT YOU NEED CHOOSING THE OPTIONS:

Installation

Preventive Maintenance

Help-desk and Remote support

Technical Assistance

Analytical Support

Calibration Certification

Rev 4

.2 0

1.2

021

VELP Official Partner

We reserve the right to make technical alterations

We do not assume liability for errors in printing, typing or transmission

USA

155 Keyland Court, Bohemia

NY 11716 - U.S.

Tel. +1 631 573 6002

[email protected]

CHINA

Xinlong Rd Building 28, Lane 1333

Shanghai city - China

Tel. +86 180 1755 7329

[email protected]

DESIGNED AND MANUFACTURED IN ITALYITALY – HQ

Via Stazione 16

20865 Usmate (MB) Italy

Tel. +39 039 628811

[email protected]

INDIA

[email protected]

LAT GmbHLabor- und Analysten-TechnikHeinkelstr. 4DE - 30827 Garbsen

10008006/A2

How to Connect to VELP Ermes Platform SER 158 Series

1/2

In order to speed up the connection, be sure to in contact with your IT specialist to get all your laboratory intranet connection details.

Requirements:

1. Device: PC, Tablet, Smartphone with your intranet (LAN or Wi-Fi)

2. Browser: Chrome, Safari, Firefox, Edge, UC browser

FIRST STEP | ACTIVATE VELP ERMES ACCOUNT

A

Go to www.velp.com through your internet browser.

B

In the Smart Lab menu click on “Configure Your VELP ErmesAccount”. Fill in the form and accept Terms and Conditions.

C

You will receive an email containing your ID, Password and a link to proceed to VELP Ermes authentication at the email address that you entered during the registration.

D

At the first login on VELP Ermes platform a new password will be requested: remember to change it!

10008006/A2 2/2

SECOND STEP | CONNECT TO YOUR SER 158

Connect the LAN cable to the SER 158 using the LAN connection on the unit.

A

In the ControlPad Select Set-Up → Connectivity and set the IP address, subnetmask and gateway of your intranet.

N.B: Contact your IT specialist toget all your laboratory intranetconnection details.

B

In the ControlPad Select Set-Up → Connectivity and press the down arrow until you reach ermes and select “product registration”.

C

Select YES under the box “EnableSER 158 to transmit on the ERMES platform”. Do not exit from thispage, keep it open.

D

Login on VELP Ermes with your ID and Password received by email, and select “Device Registration”.

E

Enter the SER 158 serial number, product code (you can find these information on the silver label on the back of it) and purchase date. Press Next.

F

Check the ControlPad where you will find the One Time Code (OTC) of four digits. Enter this number into VELP Ermes platform. Press Next and wait for connection.

G

Give a name to your SER 158 and enter the address where your instrument is located. Press Next.

H

Assign your SER 158 to a laboratory or create a new one selecting “LaboratoryManagement”.

I

Now from “Instruments” you canmonitor and control your connected SER 158.

SER 148

Reliable solid-liquid solvent extraction system

in 3 and 6 positions

Semi-automatic Solvent Extractors

Rev 1

01.2

021




USA


NY 11716 - U.S.

Tel. +1 631 573 6002

[email protected]

CHINA



Tel. +86 18017557329

[email protected]

DESIGNED AND MANUFACTURED IN ITALY

ITALY – HQ

Via Stazione 16


Tel. +39 039 628811

[email protected]

INDIA

[email protected]

Reliable Solution for Solvent Extraction

The SER 148 is the safe and convenient semi-automated extraction

system suitable for fat extraction and sample preparation in a wide

range of applications in food, feed, environmental and other industrial

segments.

■ Rapid analysis with maximum precision or accuracy

■ Maximum reproducibility and highest flexibility■ Extraction according to Randall method, faster than traditional Soxhlet

■ Accepts the majority of solvents thanks to the Vaflon seals■ High solvent recovery and low solvent consumption

■ IP 55 rating for maximum safety in your lab.

■ Compatible with HU6 hydrolysis unit for total fat determination

■ Full range of accessories

INSTRUMENT - CODE

SER 148/3 230 V / 50-60 Hz F30300240

SER 148/3 115 V / 50-60 Hz F30310240

SER 148/6 230 V / 50-60 Hz F30300242

SER 148/6 115 V / 50-60 Hz F30310242

TECHNICAL DATA

SER 148/3 SER 148/6

NUMBER OF SAMPLES 3 positions 6 positions

2 DISPLAYS Working temperature / settable parameters Working temperature / settable parameters

REPRODUCIBILITY (RSD) ≤ 1% ≤ 1%

SOLVENT RECOVERY From 50 to 75% From 50 to 75%

MAX VOLUME EXTRACTION CUP 150 ml 150 ml

NUMBER OF PROGRAMS 29 29

WORKING TEMPERATURE From 100 to 260 °C From 100 to 260 °C

COOLING WATER 2 l/min 2 l/min

SAMPLE QUANTITY From 0,5 to 15 g (generally 2-3 g) From 0,5 to 15 g (generally 2-3 g)

SOLVENT VOLUME From 30 to 100 ml From 30 to 100 ml

IMMERSION TIME From 0 to 999 minutes From 0 to 999 minutes

WASHING TIME From 0 to 999 minutes From 0 to 999 minutes

RECOVERY TIME: From 0 to 999 minutes From 0 to 999 minutes

CONSTRUCTION MATERIAL: Epoxy painted stainless steel structure Epoxy painted stainless steel structure

DIMENSIONS (WXHXD): 480x620x390 mm (18.9x24.4x15.4 in) 700x620x390 mm (27.6x24.4x15.4 in)

WEIGHT 30 Kg (66 lb) 40 Kg (88 lb)

POWER 500 W 950 W


HU 6

Convenient, reliable and safe hydrolysis unit,

as preliminary step for total fat determination

Hydrolysis Unit

Rev 2

01.2

021




USA


NY 11716 - U.S.

Tel. +1 631 573 6002

[email protected]

CHINA



Tel. +86 18017557329

[email protected]

DESIGNED AND MANUFACTURED IN ITALY

ITALY – HQ

Via Stazione 16


Tel. +39 039 628811

[email protected]

INDIA

[email protected]

Acid and basic hydrolysis for total fat determinationThe VELP Hydrolysis Unit HU 6 is the ideal solution for sample

preparation prior to solvent extraction for total fat determination

according to official methods. ■ Fast and precise heating with 0.5°C temperature stability and

homogeneity

■ Convenient operations saving operator time

■ Faster and enhanced filtration thanks to the valves that allow toselectively interrupt the vacuum in each position

■ Continuous filtration and rinsing of six samples in parallel■ Intuitive digital interface

■ Low energy consumption

■ Space saving design

INSTRUMENT - CODE

HU 6 230 V / 50-60 Hz F30300150

HU 6 115 V / 50-60 Hz F30310150

TECHNICAL DATA

HU 6

CONSTRUCTION MATERIAL Epoxy painted stainless steel structure

NUMBER OF SAMPLES 6 samples

SET TEMPERATURE Display visualization

COUNTDOWN Display visualization

DISPLAY LCD

NUMBER OF PROGRAMS 20

SELECTABLE LANGUAGE IT, EN

TEMPERATURE RANGE From room temp. to 200 °C

TEMPERATURE CALIBRATION Automatic

STABILITY OF THE HEATING BLOCK TEMPERATURE ± 0,5°C

PRECISION OF THE HEATING BLOCK TEMPERATURE ± 0,5°C

REACHING OF SET TEMPERATURE Acoustic and visual signal

POWER 1150 W

WEIGHT 14 Kg / 30.8 lb

DIMENSIONS (WXHXD) 420x230x130 mm (16.5x9.0x5.1 in)

TEMS™ Technology

Save Time, Energy, Money and Space.


SER 158...Thanks to VELP Ermes connection is possible to monitor the analysis and be notiied,...

Documents

Transcript of SER 158...Thanks to VELP Ermes connection is possible to monitor the analysis and be notiied,...