Rds Shl Hana10v8 Quick Guide en Xx

8/17/2019 Rds Shl Hana10v8 Quick Guide en Xx

http://slidepdf.com/reader/full/rds-shl-hana10v8-quick-guide-en-xx 1/27



SAP Best Practices SAP HANA Live rapid-deployment solution – Quick Guide

© SAP SE of 27

Copyright

© 2015 SAP SE or an SAP affiliate company. All rights reserved.

No part of this publication may be reproduced or transmitted in any form or for any purpose without the express

permission of SAP SE or an SAP affiliate company.SAP and other SAP products and services mentioned herein as well as their respective logos are trademarks orregistered trademarks of SAP SE (or an SAP affiliate company) in Germany and other countries. Please seehttp://global.sap.com/corporate-en/legal/copyright/index.epx#trademark for additional trademark information andnotices.

Some software products marketed by SAP SE and its distributors contain proprietary software components ofother software vendors.

National product specifications may vary.

These materials are provided by SAP SE or an SAP affiliate company for informational purposes only, withoutrepresentation or warranty of any kind, and SAP SE or its affiliated companies shall not be liable for errors oromissions with respect to the materials. The only warranties for SAP SE or SAP affiliate company products andservices are those that are set forth in the express warranty statements accompanying such products and

services, if any. Nothing herein should be construed as constituting an additional warranty.In particular, SAP SE or its affiliated companies have no obligation to pursue any course of business outlined inthis document or any related presentation, or to develop or release any functionality mentioned therein. Thisdocument, or any related presentation, and SAP SE’s or its affiliated companies’ strategy and possible futuredevelopments, products, and/or platform directions and functionality are all subject to change and may bechanged by SAP SE or its affiliated companies at any time for any reason without notice. The information in thisdocument is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. Allforward-looking statements are subject to various risks and uncertainties that could cause actual results to differmaterially from expectations. Readers are cautioned not to place undue reliance on these forward-lookingstatements, which speak only as of their dates, and they should not be relied upon in making purchasingdecisions.

http://global.sap.com/corporate-en/legal/copyright/index.epx#trademark






© SAP SE of 27

Contents

1 Purpose .................................................................................................................................................. 5

2 Positioning .............................................................................................................................................. 5

3 System Preparation ................................................................................................................................ 6

3.1 Technical System Landscape ................................................................................................ 6

3.2 Solution Overview .................................................................................................................. 6

3.3 Checking Software Pre-requisite ........................................................................................... 6

4 Step-by-Step Installation Guide ............................................................................................................. 6

4.1 Install and Configure SAP HANA ........................................................................................... 7

4.1.1 Installing SAP HANA Server .............................................................................................. 7

4.1.2 Installing SAP HANA Client ............................................................................................... 7

4.1.3 Installing SAP HANA Studio .............................................................................................. 7

4.1.4 Configuring HANA Studio view .......................................................................................... 7

4.1.5 Add HANA Server Instance ............................................................................................... 8

4.1.6 Generating Time Dimension .............................................................................................. 8 4.1.7 HANA JDBC Configuration in BI Platform ......................................................................... 9

4.2 SLT Configuration (Side-by-side only) ................................................................................... 9

4.3 Initial Load and Replication (Side-by-side only) ..................................................................... 9

4.3.1 Initial Load and Replication of ECC Tables ..................................................................... 11

4.3.2 Schema Mapping ............................................................................................................. 11

4.4 Downloading Content packages .......................................................................................... 13

4.4.1 Working with Service Market Place ................................................................................. 13

4.4.2 Working with Solution Manager ....................................................................................... 15

4.5 Deploying Content packages ............................................................................................... 16

4.5.1 Deploying Content packages manually ........................................................................... 18 4.5.2 Installation on HANA DB SPS08 or lower ....................................................................... 18

4.5.3 Installation on HANA DB SPS09 ..................................................................................... 18

4.6 Implement Smart Business Applications.............................................................................. 19

4.7 Deploying Lumira reports, Predictive analysis reports and BOBJ Reports ......................... 19

4.7.1 Working with Lumira Reports ........................................................................................... 19

4.7.2 Working with Predictive Analysis Reports ....................................................................... 19

4.7.3 Working with reports on BI Platform ................................................................................ 20

4.8 Validating Deployment ......................................................................................................... 23

4.8.1 HANA Models Validation ................................................................................................. 23

4.8.2 Applications in HANA Live Validation .............................................................................. 23

4.8.3 BOBJ Reports Validation ................................................................................................. 24

4.9 Implement Classification View service ................................................................................. 24

4.10 HANA Models, Service, BOBJ Reports and Application Configuration Guides................... 25

5 Appendix .............................................................................................................................................. 27

5.1 Sample System Access information .................................................................................... 27




© SAP SE of 27

1 Purpose

This Quick Guide provides information to consultants and customer project members for manuallyimplementing the SAP HANA Live rapid-deployment solution. This guide focuses on the technicalimplementation aspects and shows all required steps for a successful implementation of the SAP

HANA Live rapid-deployment solution and directs you to more detailed documentation if necessary.

Note that the installation of the system landscape is not part of the Rapid-Deployment Solutiondelivery scope.

2 Positioning

Disclaimer : Please refer the central note 1778607 and 1919137 for release information

pertaining to SAP HANA Live for SAP Business Suite and Frontend Server Content for SAPHANA Live Analytical Applications and SAP Smart Business Cockpits.

SAP HANA Live is another product delivered by SAP, provides virtual data models (database views) inSAP HANA for easy analysis and consumption of Business Suite data, including but not limited to ERP,CRM, GRC, GTS, SCM, Insurance Industry and Utility Industry. The Administrator’s Guide is theguide to install SAP HANA Live product and can be found in the following link http://help.sap.com/hba under section Installation, Security, Configuration, and Operations Information.

However, SAP HANA Live rapid-deployment solution, is supposed to provide pre-defined analysis andenhancement based on this SAP HANA Live product and SAP Smart Business Cockpits product, andtherefore SAP HANA Live product and SAP Smart Business Cockpits are prerequisites for this rapid-deployment solution.

If you have issues with BOBJ reports or other content for SAP HANA Live rapid-deployment solution,please create message to SV-RDS-HDB component. If you have issues with HANA models

deployment, please create message to the corresponding components of the following table:

Modules for HANA Models Component for Message

CRM CRM-ANA-OR

EAM PM-IS

FIN VDM CO-OM-IS, CO-PC-IS, FI-GL-IS

GR/IR (FIN) FI-GL-GL-D

GRC GRC-SAC-ANA (previous XX-PROJ-GRC)

GTS SLL-LEG-ANA (previous XX-PROJ-GT)

HCM CA-MSS-HCM

Insurance Claims FS-CM, FS-ICM, FS-CD

Insurance Policy Mgmt FS-PM, FS-ICM

MM MM-PUR-HBA, MM-IM-HBA

PP PP-IS

Process Observer CA-EPT-POC

Project System PS-ST, PS-IS

Retail (CAR) IS-R-CAR

https://service.sap.com/sap/support/notes/1778607






http://help.sap.com/hba









© SAP SE of 27

SCM-APO SCM-APO-ANA

SD Reports SD-HBA-REP

SD VDM SD-HBA-VDM

PM SV-RDS-HDB

Hierarchy for CO SV-RDS-HDB

3 System Preparation

3.1 Technical System Landscape

There are three options for technical system landscapes for SAP HANA Live for Business Suite:

1. Integrated scenario - SAP HANA Live shares a SAP HANA appliance with the BusinessSuite system, whose data is being used for SAP HANA Live. This scenario is recommendedfor source systems which do run on SAP HANA.

2. Side-by-side scenario - Two separate systems for SAP Business Suite and SAP HANA,

where the data is replicated to SAP HANA using the SAP Landscape Transformation (SLT). 3. Side-by-side with BW on HANA integrated scenario – It is similar with Scenario 2, but with

BW on HANA integrated on the same HANA box.

In each case, SAP BI Platform could connect to the HANA box to provide BOBJ analysis.

Please refer to the Technical System Landscape of the Administrator’s Guide for detailedtechnical system landscape information.

In case you want to know more about BW integration with SAP HANA Live, please followConfiguration Guide H35: SAP HANA Live integration with BW, which is Building BlockConfiguration Guide available in content library for detailed instruction.

In case you want to install SAP Smart Business Cockpits, please follow Configuration Guide H29: Fiori Setup for Smart Business Cockpits, which is Building Block Configuration Guide available incontent library for detailed information on how to setup Smart Business Cockpit in your landscape.Generally speaking, SAP NetWeaver Gateway, SAP Web Dispatcher and SAP HANA Studio areneeded.

3.2 Solution Overview

This SAP Rapid Deployment Solution is based on SAP HANA Live for SAP Business Suite 1.0, latestSupport Package, and SAP Smart Business Cockpits 1.0, latest support package. It provides pre-configured analysis or enhancement based on the HANA models provided.

3.3 Checking Software Pre-requisite

Please refer to the Software Requirement Document for detailed information.

4 Step-by-Step Installation GuideThis section provides an overview of the installation procedure. Please refer to the

Installation Steps - General Information of the Administrator’s Guide for detailed install and

configures information.

For the Integrated Scenario option, you may skip sections 4.2 SLT Configuration and 4.3 Initial Loadand Replication of this document. Since the ABAP server creates all tables in one specific databasecatalog schema (typically <SAPSID>) in integrated scenario, this needs to be mapped to the authoring

schema of the imported content packages. You may refer to 4.3.2 for schema mapping details.




© SAP SE of 27

4.1 Install and Configure SAP HANA

The In-Memory Computing Engine consists of the following components:

SAP HANA Server.

SAP HANA Client.

SAP HANA Studio.

For detailed instruction please refer to http://help.sap.com/hana_platform.

4.1.1 Installing SAP HANA ServerThis is a prerequisite and not the part of RDS. SAP HANA is a Software and Hardwarecombination and therefore this step should be completed by the Hardware vendor.

For detailed instructions on installing the SAP HANA Server, follow the Installation and UpgradeInformation.

4.1.2 Installing SAP HANA ClientThis is a prerequisite and not the part of RDS. Please check especially the SAP HANAClient Installation and Update Guide. The SAP HANA Client has to be installed for all the

users who will access the data in SAP HANA by using some kind of frontend tools, for example Excel,BOBJ Clients etc.

4.1.3 Installing SAP HANA Studio

Use The SAP HANA Studio is a collection of applications for the SAP HANA appliance software. It enablestechnical users to manage the SAP HANA database, to create and manage user authorizations, andto create new or modify existing models of data in the SAP HANA database. It is a client tool, whichcan be used to access local or remote SAP HANA databases. The SAP HANA Studio runs on theEclipse platform 3.6. For more information about SAP HANA, see the SAP HANA Master Guides. For detailed instructions on installing the SAP HANA Studio, please refer to SAP HANA StudioInstallation and Update Guide.

Prerequisite The Java runtime is accessible either via the PATH or JAVA_HOME variable or by specifying the

--vm option. You are logged on as a local administrator. You have downloaded the installation package from SAP location or from provided share drive.

Procedure1. Open a command prompt and go to the directory where you unpacked the software. To do this go

to the accessories folder within Windows start menu and select “Command Prompt”.

2. Call the hdbsetup program by entering the following command:

hdbsetup –a studio

3. Choose the activity to be performed.

4. Follow the instructions displayed by Installation Manager.

5. Leave the command prompt after the installation or update was completed

Result SAP HANA Studio has been installed or updated.

4.1.4 Configuring HANA Studio view

Procedure1. Choose Start Al l Programs SAP HANA SAP HANA Studio to open your SAP HANA

Studio.2. Choose menu Window Open Perspective Other ...3. Choose Perspective SAP HANA Modeler .

http://help.sap.com/hana_platform






























© SAP SE of 27

4. Ensure you have Quick View displays, otherwise choose menu Help Quick View .

Result You select the view for HANA modeling.

4.1.5 Add HANA Server Instance

Procedure1. Choose Start Al l Programs SAP HANA SAP HANA Studio

2. In the Systems panel, right-click and choose Add System … 3. Input the HANA hostname, instance number and Description, then choose Next

4. Input your username and password and choose Finish

Result You added one HANA system in your HANA Studio.

4.1.6 Generating Time Dimension

Procedure1. Choose Start Al l Programs SAP HANA SAP HANA Studio to open your SAP HANA

Studio.

2. Log on to your HANA server if not automatically logged on.3. From the Quick View page, choose Generate Time Data.

4. In the Generate Time Data dialog, select your HANA system, and choose Next .

5. Input values like following:

Field Value Comment

Calendar Type Gregorian

From Year: For example: 1990

To Year: For example: 2030

Granularity: For example: Day

First day of the week: For example: Sunday The first day of the week inyour company

6. Choose Finish .

7. Repeat steps 3-6 for the granularities Week, Month and Year. For Month and Year, First day ofthe week value is not necessary.

8. Check table M_TIME_DIMENSION, M_TIME_DIMENSION_WEEK,M_TIME_DIMENSION_MONTH, M_TIME_DIMENSION_YEAR in schema _SYS_BI to confirmthe time generation.

NOTE: For all data that is associated with a timestamp, you would need to convert this intoformat that contains fields such as hours, days, months, years and so on. Once yougenerate the time data, a table containing all the time data is created.

Recommendation: With a given HANA system, please make sure this step is performedbefore analyzing data from the reports, since some Applications will report error message if

they coud not find corresponding Time Dimension from HANA. And the time dimension forreports could also be wrong without this step.




© SAP SE of 27

4.1.7 HANA JDBC Configuration in BI Platform

UseSetup the JDBC connection to connect HANA box from the BI Platform and BO Explorer as describedin the following steps:

When installing or updating new versions of SAP HANA, BI Platform and BO Explorer youshould also update the corresponding version of the SAP HANA JDBC driver

Procedure1. Download HANA client from SAP Service Market Place.

2. Find the file JDBC.TGZ and extract to get ngdbc.jar.

3. Stop BI Platform server.

4. Copy the new ngdbc.jar driver to BI Platform server location<server install path>\SAP BusinessObjects\SAP BusinessObjects Enterprise XI4.0\dataAccess\connectionServer\jdbc\drivers\newdb\.

5. Copy the new ngdbc.jar driver to BO Explorer server location <server install path>\ SAPBusinessObjects\Explorer14.0\plugins\com.sap.ngdbc_1.0.0\lib\.

6. Restart server.

7. Copy the file to BI Platform client tools installation location <BI client tools install path>\ SAPBusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\jdbc\drivers \newdb.

If newdb folder cannot be found, please create one folder named newdb.

4.2 SLT Configuration (Side-by-side only)

This is a prerequisite and not the part of RDS . The trigger based replication can be activated andmonitored with the Synchronization Monitor. Make sure you have installed the SLT component beforeproceeding with the following sections. All necessary steps are described at SAP HANA ReplicationInstallation Guides.

In case you want to know more about SLT Configuration, please follow Configuration Guide HA1: SAPLandscape Transformation for SAP HANA, which is Building Block Configuration Guide available incontent library for detailed instruction.

4.3 Initial Load and Replication (Side-by-side only)

The Initial load and replication of source system Tables is very important to get data loaded intoHANA. In the table below, the SAP Notes with table lists are available.

The SAP Notes mentioned above may also contain other SAP Notes, which will also containtable lists needed.

Product SAP Note Number Short Description ofSAP Note

Authoring Schema

SAP HANA Live forSAP ERP

1781992 Tables for SAPHANA Analytics forERP 1.0

SAP_ECC

SAP HANA Live forEHP 4 for SAP ERP

1781992 Tables for SAPHANA Analytics for

ERP 1.0

SAP_ECC

















© SAP SE of 27

FS-CM (ClaimsManagement)

SAP HANA Live forSAP CRM

1782066 Tables for SAPHANA Analytics forCRM 1.0

SAP_CRM

SAP HANA Live forSAP SCM

1782067 Tables for SAPHANA Analytics forSCM 1.0

SAP_SCM

SAP HANA Live forSAP solutions forGRC

1782068 Tables for SAPHANA Live for GRC1.0

SAP_GRC

2027728 Tables for HANA Livefor GRC 10.1 ORMVirtual Data Model

SAP_GRC

SAP HANA Live forSAP GTS


GTS 1.0

SAP_GTS

SAP HANA Live forPolicy Management

1918954 SAP HANA:Prerequisites forReporting

SAP_FSPM

SAP HANA Live forManufacturing

1803129 Table for SAPOverall EquipmentEffectiveness 1.0

SAP_ECC

SAP_OEE

SAP_MII

SAP HANA Live forSAP TransportationManagement

1918523 Tables for SAPHANA Live forTransportationManagement

SAP_TM

SAP HANA Live forEvent Management

1918524 Tables for SAPHANA Live for EventManagement

SAP_EM

SAP HANA Live forExtended WarehouseManagement

1952597 Tables for SAPHANA Live forExtended WarehouseManagement

SAP_EWM

SAP HANA Live forthe financials add-onfor SAP BusinessSuite powered by

SAP HANA

1967268 Tabellen für SAPHANA Live for SmartFinancials 1.0

SAP_ECC

SAP HANA Live forFinancial Close

1919584 Tables for SAPSmart Business forfinancial close

SAP_FCC

SAP HANA Live forUtilities, edition forSAP ERP

1992866 Tables for SAPHANA Live forUtilities, edition forSAP ERP

SAP_ECC

SAP HANA Live forUtilities, edition forSAP CRM

2045947 Tables for SAPHANA Live for CRMUtilities, edition forSAP CRM

SAP_CRM

SAP HANA Live forSAP CRM and SAP

2035874 Tables for SAPHANA Live for SAPCRM and SAP ERP

SAP_CRM

SAP_ECC


































© SAP SE of 27

ERP cross-analytics cross-analytics

SAP HANA Live forRetail

2063409 Tables for SAPHANA Live for Retail

SAP_ECC

Note: The tables can be added by loading files downloaded from SAP Notes, instead of addingtables manually one by one.

After reading the Solution Scope and Configuration Guide documents, you can identify the tables thatmust be loaded and replicated from source system. The initial load process can take some time tocomplete and depends on the size of the data being loaded into HANA server. Additional details maybe found in the following document: Application Operations Guide – Trigger-Based DataReplication Using SAP LT Replication Server for SAP HANA.

4.3.1 Initial Load and Replication of ECC TablesThe following sections use ECC as an example to show how this process is performed, for other SAP

Business Suite systems such as CRM; you can refer the similar process.

Prerequisite

The SLT configuration has been setup successfully. Make sure DD02L and DD02T tables are createdand data is replicated completely.

Procedure1. Choose StartAll ProgramsSAP HANA SAP HANA Studio to open your SAP HANA

Studio.

2. Log on to your HANA server if not automatically logged on.

3. From the Quick View tab page, choose Data Provisioning.

4. In the Data Provisioning Page, select your HANA system, and choose Finish.

5. Choose the correct source system.

6. Choose button Replicate.

7. In the Replicate dialog, input table names from above mentioned SAP Notes, choose button Add to make it in the selected section. Or you can use the Load from CSV f i le button to add tables inbatch.

Please note that the replication for big tables may need some time to complete. Therefore,it is recommended to load big tables as last step e.g. BSEG, BKPF, FAGLFLEXA.

8. Choose Finish to load all the tables.

4.3.2 Schema Mapping

UseThe delivered packages refer to a pre-defined schema, such as SAP_ECC, are called authoringschema. To refer the views in the packages to the replication schema, a schema mapping must bedefined in the SAP HANA database via the SAP HANA Studio.

For example, package sap.hba.ecc refers to authoring schema SAP_ECC. In your system landscapethe tables from your SAP ECC system are replicated into replication schema <CorrespondingCustomer SLT-Schema>. Then a schema mapping has to be set up from SAP_ECC to<Corresponding Customer SLT-Schema>.

The table below shows the relationship between delivered packages and their authoring schema:

Package Authoring Schema

SAP HANA Live for SAP ERP

SAP HANA Live for EHP 4 for SAP ERP

SAP_ECC


http://help.sap.com/hana_options_replication?current=hana_platform












© SAP SE of 27

SAP HANA Live for SAP CRM SAP_CRM

SAP HANA Live 1.0 for SAP SCM SAP_SCM

SAP HANA Live for SAP solutions for GRC SAP_GRC

SAP HANA Live 1.0 for SAP GTS SAP_GTS

SAP HANA Live 1.0 for Policy Management SAP_FSPM

SAP HANA Live for Manufacturing SAP_ECC

SAP_OEE

SAP_MII

SAP HANA Live for SAP TransportationManagement

SAP_TM

SAP HANA Live for SAP Event Management SAP_EM

SAP HANA Live for Extended WarehouseManagement

SAP_EWM

SAP HANA Live for InsuranceSAP_ECC

SAP_FSPM

SAP HANA Live for the SAP Simple Financeadd-on for SAP Business Suite powered bySAP HANA

SAP_ECC

SAP HANA Live for Financial Close SAP_FCC

SAP HANA Live for Utilities, edition for SAPERP

SAP_ECC

SAP HANA Live for Utilities, edition for SAPCRM

SAP_CRM

SAP HANA Live for SAP Business Suitefoundation component

SAP_FND

SAP HANA Live for SAP CRM and SAP ERPcross-analytics

SAP_CRM

SAP_ECC

SAP HANA Live for Retail SAP_ECC

Procedure1. Choose StartAll ProgramsSAP HANASAP HANA Studio to open your SAP HANA Studio.


3. From the Quick View page, choose Schema Mapping .

4. In the Schema Mapping dialog, select your HANA system, and choose Next.

5. In the Schema Mapping dialog, enter the following values:

Field Sample Value

Authoring Schema SAP_ECC

Physical Schema <Correcponding Customer SLT-Schema>

6. Choose button Finish.

7. Check table M_SCHEMA_MAPPING in schema _SYS_BI to confirm the proper mapping

NOTE: To get more insight on how to leverage SAP HANA Live content to amalgamateSAP data coming from different SAP Business Suite source systems to provide a centralview for use in reporting and analytics, please refer to Configuration guide H37 in Step-by-Step guide.




© SAP SE of 27

4.4 Downloading Content packages

For downloading SAP HANA content packages, you may choose to use SAP Solution Manager todownload the content or manually download content from Service Market Place. Both approacheswill be introduced below; you can select the one you need.

Note: For additional HANA Models added in this Rapid Deployment Solutions, you can follow thesteps in SAP Note 1846294 to download.

4.4.1 Working with Service Market Place

Procedure1. Download the SAP HANA Live product and SAP Smart Business Cockpits product via Service

Market Place, following the steps in SAP Note 1846294.

You will find the below items for SAP HANA Live product:

Name Technical Name Official Name

SAP HANA ANALYTICSFOR ERP

HCO_HBA_ECCSAP HANA Live for SAP ERP

SAP HANA ANALY. ERPEHP4

HCO_HBA_ECCFND701,

HCO_HBA_FSCX604

SAP HANA Live for EHP 4 for SAPERP

SAP HANA ANALYTICSFOR CRM

HCO_HBA_CRMSAP HANA Live for SAP CRM

SAP HANA ANALYTICSFOR GRC

HCO_HBA_GRC SAP HANA Live for SAP solutions forGRC

SAP HANA ANALYTICSFOR GTS

HCO_HBA_GTSSAP HANA Live for SAP GTS

SAP HANA ANALY. FORFS-PM

HCO_HBA_FSPM510 SAP HANA Live for PolicyManagement

SAP HANA ANALYTICSFOR SCM

HCO_HBA_SCM_APOSAP HANA Live for SAP SCM

SAP HANA ANALY. FORMANUF. 1.0

HCO_HBA_OEE,

OEE_ERP (OEE ERP INTERFACE1.0)

OEE_MII (MFG MII CONTENT 1.0)

SAP HANA Live for Manufacturing

SAP GRC ANALYTICS HCO_HBA_APPS_GRCA SAP Access Control Role Analytics

SAP GRIR MONITOR HCO_HBA_APPS_GRIRM SAP Invoice and Goods Receipt

Reconciliation

SAP APO ANALYTICS HCO_HBA_APPS_APOAN SAP Supply Chain Info Center

SAP WORKING CAPITAL ANALYTICS

HCO_HBA_A_WCA_DSO_S,

HCO_HBA_A_WCA_DSO_U,

HCO_HBA_A_R_APF,

HCO_HBA_A_WCA_DPO_S,

HCO_HBA_A_WCA_DPO_U

SAP Working Capital Analytics

SAP HANA CONTENT HCO_HBA_AF_EXPLORER SAP HANA Live Browser












© SAP SE of 27

TOOLS HCO_HBA_AAA SAP HANA Live Authorization Assistant

HCO_HBA_T_EXTN SAP HANA Live Extensibility Plug-in

SAP HANA ANALY TICSFOR INS 1.0

HCO_HBA_X_INS01 SAP HANA Live for Insurance

SAP HANA ANALY TICS F.CRMX 1.0

HCO_HBA_X_CRM SAP HANA Live for SAP CRM andSAP ERP cross-analytics

SAP HANA ANALY TICSFOR ISU 1.0

HCO_HBA_ISUECC SAP HANA Live for Utilities, editionfor SAP ERP

SAP HANA ANALY. F.CRM-IU

HCO_HBA_CRMIU SAP HANA Live for Utilities, editionfor SAP CRM

SAP HANA ANALY. F.GRC10.1

HCO_HBA_GRC101 SAP HANA Live for SAP solutionsfor GRC 10.1

SAP HANA ANALY. F. FND HCO_HBA_FND SAP HANA Live for SAP BusinessSuite foundation component

SAP HANA ANALY. FORSFIN

HCO_HBA_SFIN700 SAP HANA Live for the SAP SimpleFinance add-on for SAP BusinessSuite powered by SAP HANA

SAP HANA ANALYTICSFOR FCC

HCO_HBA_FCC SAP HANA Live for Financial Close

SAP HANA ANALYTICSFOR EM

HCO_HBA_EM SAP HANA Live for EventManagement

SAP HANA ANALYTICSFOR TM

HCO_HBA_TM SAP HANA Live for TransportationManagement

SAP HANA ANALY. FOREWM

HCO_HBA_EWM SAP HANA Live for ExtendedWarehouse Management

SAP HANA ANALYTICS F.RTL

HCO_HBA_RTL SAP HANA Live for Retail

You will find the below items for SAP Smart Business Cockpits product:

Name Technical Name Contents

SAP Smart business F. SFIN HCO_HBA_R_SFIN700

HCO_HBA_SFIN700

HCO_HBA_A_SFIN_S

HANA Live Content Reuse for SAPSimplified Financials 100

Hana Content Hba SAP Sfin 100Hana Content Simplified Financials S100

SAP Smart Business FOR APO HCO_HBA_APPS_APOANHCO_HBA_SCM_APOHCO_HBA_A_SCM_S

APO Analytics 100

Content Hana-based Analytics for SAPSCM 100

HANA Live Analytical App for SAP SCM100

SAP Smart Business FOR EM HCO_HBA_R_EMHCO_HBA_EM

HANA Live Content Reuse for SAPEvent Management 100

Hana Live Content for SAP Event

Management 100

SAP Smart Business FOR ERP HCO_HBA_A_SOFM_SHCO_HBA_R_ECC

SAP Smart Business for Sales OrderFulfillment Monitor 100




© SAP SE of 27

HCO_HBA_ECC

HCO_HBA_A_PS_S

HCO_HBA_R_APPL604

HANA Live Content Reuse for SAP ERP100

Content for Hana-based Analytics forSAP ECC 100

SAP Smart Business for Project Systems100

HANA Content Reuse SAP_APPL604100

SAP Smart Business FOR EWM HCO_HBA_R_EWM

HCO_HBA_EWM

HANA Live Content Reuse for EWM 100

Content for Hana-based Analytics forEWM 100

SAP Smart Business FOR FCC HCO_HBA_R_FCCHCO_HBA_FCC

HANA Live Content Reuse for SAPFinancial Closing Cockpit 100

Hana Live Content for SAP FinancialClosing Cockpit 100

SAP Smart Business FOR FND HCO_HBA_R_FND

HCO_HBA_FND

HCO_HBA_A_SNTA_S

HANA Live Content Reuse for

Foundation 100Content for Hana-based Analytics forFND 100

HANA Live Analytical App for Sentiment Analysis 100

SAP Smart Business FOR GRC HCO_HBA_R_GRC

HCO_HBA_A_GRCIA_S

HCO_HBA_GRC

HANA Live Content Reuse for SAP GRC100

SAP Smart Business for GRC 100

Content Hana-based Analytics for SAPGRC 100

SAP Smart Business FOR RTL HCO_HBA_RTL

HCO_HBA_A_RTL_S

HCO_HBA_ECC

HCO_HBA_R_RTL

Content for Hana-based Analytics for

RTL 100

SAP Smart Business for RTL 100

Content for Hana-based Analytics forSAP ECC 100

HANA Live Content Reuse for RTL 100

SAP Smart Business FOR TM HCO_HBA_R_TM

HCO_HBA_TM

HANA Live Content Reuse for SAPTransportation Management 100

Hana Live Content for SAPTransportation Management 100

4.4.2 Working with Solution Manager

Prerequisite

Your SAP HANA database has to be registered in the System Landscape Directory (SLD).

In addition, your SAP HANA database must be created as a product system in the LandscapeManagement Database. You do this in SAP Solution Manager using transaction LMDB. This isnecessary for the steps described under SAP Solution Manager below.

For more information about how to register in SLD, see SAP Help Portal athttp://help.sap.com/hana_appliance .

Procedure1. In SAP Solution Manager, run transaction LMDB. On the Product Systems tab, select yourproduct system and choose Display.

http://help.sap.com/hana_appliance






© SAP SE of 27

2. In the navigation tree, click on the top node (Product System).

3. On the Maintenance Transactions tab, under Maintenance Optimizer Transactions, choose Create Transaction.

4. Under Choose File Selection Mode choose Calculate Files Automatically and then chooseContinue.

5. On the Operations tab, under Change Options, select change option Support Package Stacks – Implementation of Support Packages and choose Continue.

6. If you are not yet running SPS 08 or higher, set it as your target stack under Select Target andchoose Continue.

NOTE: This will update your SAP HANA DB to SPS 08 or higher.

7. Confirm the Major Target by choosing Continue.

8. To choose your products, note the following:

Note: If you are using Maintenance Optimizer 3.0, the Add-On Product List is created dynamically.

You initially see only add-ons that can be installed directly on the SAP HANA database. If youwant to install an add-on that requires another add-on to be installed, you must first select therequired product version on which the product you want to install is based.

Example: You want to install the product version SAP WORK CAPITAL ANALYTICS 1.0. For thisproduct version to be listed, you must first have selected SAP HANA ANALYTICS FOR ERP 1.0.

If you product has several instances, you must select the instances you want to install manually.When your instance is selected, choose Apply.

9. Follow this procedure for all products you want to install. When you are done, choose Continue.

10. Under Select OS/DB-Dependent Files, expand the instance node under File Name. Select SAPHANA database and choose Continue.

11. Under Select Files for Add-on Products, choose Continue.

12. Under Select Stack-Dependent Files, under File Name, new database patches are pre-selected bydefault. If you do not want to install these patches, de-select them. You must not deselect OS-DBif you are upgrading your SAP HANA database to HANA SPS 08. Choose Continue.

13. Confirm the download basket by choosing Continue.

14. On the Stack Files tab, download the System-Specific XML for SLM. Save and close theMaintenance Optimizer windows. Then download the calculated files using SAP DownloadManager from SAP Service Marketplace. Make the downloaded files and XML files available onyour SAP HANA appliance.

15. As the SYSTEM user in the SAP HANA studio, right-click on the server node in the navigationpane, and select Lifecycle Management.

16. Select Apply Support Package Stack under Update SAP HANA System.

17. Choose Manually downloaded content, then browse to find the content you downloaded in step 5and run the installation and update procedure.

For more information about the Maintenance Optimizer, see SAP Help Portalat http://help.sap.com/solutionmanager71

4.5 Deploying Content packages

UseNow you have downloaded the content packages and ready to deploy them in your HANA system.You have several approaches available to finish the deployment, so select the appropriate onedepending on your own requirement.

http://help.sap.com/disclaimer?site=http%3A%2F%2Fhelp.sap.com%2Fsolutionmanager71







© SAP SE of 27

Note: Since any of the below 3 approach could work, so please just select one and go through it. Foradditional HANA Models added in this Rapid Deployment Solutions, approach 1 (Deploying Contentpackages manually) is recommendation. You have to manually deploy all necessary content first.

Note: There will be activation errors for content package HCO_HBA_ECC in Simple Finance system.Please check SAP Note 1967187 for more details.

Caution: To install the HANA Live for Simple Finance, you need to have Simple Finance ready in yoursystem first. This is a prerequisite and not the part of RDS. So the sequence would be: installSimple Finance -> Install HANA Live for Simple Finance -> Deploy HANA Live RDS content on SimpleFinance, then you can consume the pre-built reports from HANA Live RDS on Simple Finance.

Note: There will be activation errors for content package HCO_RDS_SHL_ECC , since no tableHIER_AUTH in schema SAP_HBA. You need to manually create this HIER_AUTH hdb table.

1) In SAP HANA studio, switch to SAP HANA Development perspective and navigate to theProject Explorer tab.

2) Right click on the blank area and choose New -> Project .

3) In the New Project page, choose XS Project . Click Next .

4) In the New XS Project page, check the box before Share Project in SAP repository and fill inthe Project name with db. Click Next .

5) In the Share Project page, Click Add Workspace, choose your SAP HANA system, check thebox before Use Default Workspace or rename the Workspace Name. Choose Finish.

6) Back to the Share Project page, Click Browse… behind Repository Package, choose sap ->rds-shl -> ecc -> co from your workspace and click OK . Make sure the box before Add projectFolder as Subpackage is selected. Click Next .

7) In the Create Object page, fill in the box behind Schema with SAP_HBA. Choose Finish.8) Right click on the db project and choose New -> Database Table.

9) In the New Database Table page, fill in the File name with HIER_AUTH. Choose Finish.

10) Paste the following code:

table.schemaName = "SAP_HBA";

table.tableType = COLUMNSTORE;

table.columns =

[

{name = "LOGSYS"; sqlType = NVARCHAR; length = 10; nullable = false; comment= "Logical system";},

{name = "USER"; sqlType = NVARCHAR; length = 12; nullable = false; comment= "User";},

{name = "SUBCLASS"; sqlType = NVARCHAR; length = 4; nullable = false; comment= "Controlling Area";},

{name = "SETCLASS"; sqlType = NVARCHAR; length = 4; nullable = false; comment= "Set Class";},

{name = "SETNAME"; sqlType = NVARCHAR; length = 24; nullable = false; comment= "Hierarchy Node";}

];

table.primaryKey.pkcolumns = ["LOGSYS", "USER", "SUBCLASS", "SETCLASS","SETNAME"];

11) Click Activate button or press Ctrl+F3.

12) Redeploy the calculation view CostCenterAuthorized .








© SAP SE of 27

Procedure

4.5.1 Deploying Content packages manuallyDeploying the content manually from HANA Studio is a simple approach, and here are the steps:

1. Now you have got all the installation files for HANA Live and Smart Business Cockpits. Getthe corresponding .tgz files from the .zip files.

2. Choose Start Al l Programs SAP HANASAP HANA Studio to open your SAP HANA Studio.


4. Choose menu File Import , click on SAP HANA Content and select Delivery Unit , and chooseNext.

5. In the Import Through Delivery Unit Page, select your HANA system, and choose Next.

6. In Import Through Delivery Unit dialog, set the following values:

Field name User action and values Comment

Select file Client

File *.tgz This file is included withdownload content

Overwrite inactiveversions

Checked

Activate objects Checked

7. Click Finish to import the content.

8. Check ‘job log’.

4.5.2 Installation on HANA DB SPS08 or lowerIf you are using SAP HANA SPS08 or lower SPS, you need follow below steps to install the contentpackages:

1. As the SYSTEM user in the SAP HANA studio, right-click on the server node in the navigationpane, and select Lifecycle Management.

2. Select Deploy HANA Content under Manage SAP HANA Applications Content.

3. On the screen Deploy SAP HANA Content choose the option From an accessible share or From aPersonal Computer.

4. Under Path of remote HANA content ZIP archive, browse to the zip files you have downloaded.You can select and deploy only one zip file at a time. Choose Next.

Ensure the correct installation sequence.5. When you are done, choose Run.

6. Repeat steps 3, 4 and 5 for each SAP HANA Live product you want to install.

For more information about how to configure the SAP HANA Lifecycle Manager, see SAP HelpPortal at http://help.sap.com/hana_appliance ->Installation and Upgrade Information -> SAPHANA Server Installation and Update Guide.

4.5.3 Installation on HANA DB SPS09If you are using SAP HANA SPS09, you need follow below steps to install the content packages:

1. Ensure that you have configured SAP HANA Application Lifecycle Management as described inthe respective section on SAP Help Portal at http://help.sap.com/hana_appliance -> Development












© SAP SE of 27

Information -> SAP HANA Developer Guide.

Using hdbalm, install all the SAP HANA Live products you require. Follow the instructionsdescribed in the section Installing and Updating Add-On Products and Software Components onSAP Help Portal at http://help.sap.com/hana_appliance -> System Administration andMaintenance Information -> SAP HANA Administration Guides -> SAP HANA AdministrationGuide.

4.6 Implement Smart Business Applications

Use

SAP Smart Business applications provide insight into the real-time operations of your business bycollecting and displaying KPIs directly in your browser. To do this, SAP Smart Business combines thedata and analytical power of SAP HANA with the integration and interface components of SAPBusiness Suite.

There are 13 Smart Business Applications covered in this package. For more details on how to setupSmart Business Cockpits, please refer to Configuration Guide H29: Fiori Setup for Smart BusinessCockpits. And the Administrator’s Guide in http://help.sap.com/ssb provides more details if needed.

4.7 Deploying Lumira reports, Predictive analysis reports and BOBJReports

4.7.1 Working with Lumira Reports

UseThe Lumira reports are packaged and published in Service Market Place. You can follow the stepsbelow to get them work.

There are different Lumira files for different scope items, including SAP ERP FI/CO, SD, MM, PP, SAPGTS, SAP OEE, Cross SD/CRM, and SAP Utility Industry.

NOTE: SAP Lumira reports are delivered as .lums files, and do not need to deploy to BI platform.You can open it from your local machine where SAP Lumira installed.

Procedure1. Download the .zip file via the link described in SAP Note 1846294.

2. Download and install SAP Lumira desktop from SAP service market place.

3. Open the .lums file in the .zip file with SAP Lumira, input your own HANA Connect information,and click Connect button.

4. Choose menu Data->Edit, click Edit Variables in the popup screen. Input your own value for thevariables, such as SAP Client, and click OK to refresh the report with your own data.

ResultThe Lumira reports are showed in your desktop.

4.7.2 Working with Predictive Analysis Reports

UseThe Predictive Analysis reports are packaged and published in Service Market Place. You can followthe steps below to get them work.

There is only one Predictive Analysis report for current version, focus on Plant Maintenance analysis.

NOTE: SAP Predictive Analysis reports are delivered as .lums files, and do not need to deploy toBI platform. You can open it from your local machine with SAP Predictive Analysis installed.




http://help.sap.com/ssb












© SAP SE of 27

Currently SAP Predictive Analysis and SAP Lumira could not be installed to the same laptop.

Procedure1. Download the .zip file following the steps in SAP Note 1846294.

2. Download and install SAP Predictive Analysis from SAP service market place.3. Open the .lums file in the .zip file with SAP Predictive Analysis, input your own HANA Connect

information.

4. Choose menu Data->Edit, click Edit Variables in the popup screen. Input your own value for thevariables, such as SAP Client, and click OK to refresh the report with your own data.

ResultThe Predictive Analysis reports are showed in your desktop.

4.7.3 Working with reports on BI Platform

4.7.3.1 Importing LCMBIAR file

UseThe BOBJ reports are packaged to .LCMBIAR files. You can follow the steps below to import theLCMBIAR file to your BI Platform.

There are different .LCMBIAR files for different business functions, including SAP ERP Finance, SAPERP Sales and Distribution, SAP ERP Materials Management, SAP ERP Product Planning, SAP GTS,SAP GRC, SAP CRM, and SAP Insurance.

Please note there are Dashboards, Web Intelligence reports, Crystal Reports, InformationSpaces & Exploration View, Design Studio reports, and Analysis Workspace for OLAP indifferent areas of FI, CO, SD, MM, PP, GTS, GRC, CRM, and Insurance Industry. Also, this

archive file contains Universes, Universe connection objects which must be pointed to the HANASystem, as these Universes are created on top of HANA models. The BOBJ Reports are basedon the Universes except for the Information Spaces, Exploration Views, Design Studio reports,and Analysis Workspace for OLAP.

Procedure1. Download the BOBJ reports package via the link described in SAP Note 1846294.

2. Log into the Central Management Console tool by user “ Administrator ”.

http://<hostname>:<port>/BOE/CMC.

3. Select “Promotion Management ”.

4. In the “Promotion Jobs” home page, select Import Import from f i le . The Import from file

window appears.5. Browse the .LCMBIAR file from your local driver and click OK .

6. Select the folder in which you want to save the job.

7. Choose your CMS system from Destination Drop-down.

8. Click Create . A new job is created and stored in the CMS repository.

9. Click on Promote button and the Promote - <job nam e> window appears.

10. Enter the Change Management ID if necessary.

11. Click on Promote button. The importing of LCMBIAR file will be in progress.

12. Please check that the LCMBIAR file is promoted successfully.

ResultThe LCMBIAR file is imported to your BI Platform.












© SAP SE of 27

4.7.3.2 Adapting Connection for Universe

UseIn this activity, you will adapt the universe connection and switch to your own HANA box.

Procedure1. Start the Information Design Tool from the BusinessObjects Enterprise programs list.

2. In the Repository Resources window, click on to add the CMS system.

3. In the popup dialog box, enter server (IP of CMS):6400, username, password and click on OK.

4. Expand the node <hostname: port> Connections SAP, you will find several connectionsavailable here:

Connection Name Usage

SAP_ECC Works for ERP reporting, such as FI, CO, SD, MM, PP, etc.

SAP_GTS Works for GTS reporting.

SAP_GRC Works for GRC reporting.

SAP_INS Works for Insurance reporting.

5. Right click on the connection you want to change, and choose Edit .

6. In the right window click Edit .

7. In the popup dialog Edit Relational Connection window, enter the User name, Password andupdate your host id and port id with the information provided by your HANA administrator.Host ID: <HANA Server IP address>:3xx15, where xx is your instance number; E.G.If instance number is 01 then host ID would be <HANA Server IP address>:30115

8. Click Test Connection to test if your setting is okay.

9. Choose Finish.

10. Save your setting.

ResultThe connection has been adapted to your own HANA system, and you will be able to run the pre-defined reports and create Information Spaces on top of HANA models on your own.

4.7.3.3 Adapting OLAP Connection

UseIn this activity, you will adapt the OLAP Data Source Connection and switch to your own HANA box.

Procedure

1. Start the Central Management Console.For example, on Windows, click Start > Programs > SAP BusinessObjects Business Intelligenceplatform 4 > SAP BusinessObjects Business Intelligence platform > Central ManagementConsole.

2. Log on to the Central Management Console.

3. In the Organize area in the CMC, select OLAP Connections.

A list of existing connections is displayed.

OLAP Connection Name Usage

SAP_ECC_OLAP Works for ERP OLAP reporting

SAP_CRM_OLAP Works for CRM OLAP reporting.

If no connections are listed, you need to create a new OLAP connection to allow your data




© SAP SE of 27

analysts to begin working with Analysis workspaces.

4. Select the connection that you want to edit, here we choose SAP_ECC_OLAP as sample,and click Edit Connection. You can now change the contents of any of the fields to reconfigureyour OLAP connection.

If you do not have "Add objects to the folder" permission in the BI platform system, youcannot edit a connection, and the Edit Connection button is unavailable.

5. Click Save to save the new connection settings.

6. Update another OLAP connection SAP_CRM_OLAP by doing step 1 – step 5 again.

Result The OLAP connections have been adapted to your own HANA system, and you will be able to run thepre-defined reports and create Analysis edition for OLAP and Design Studio reports on top of HANA

models on your own.

4.7.3.4 Working with Information Space and Exploration ViewUseIn this activity, you will index the Information Space which helps you to get the latest data to consumein the Information Space and Exploration View reports. There is some default values defined forinformation space when it is released, since it is mandatory value required by the HANA model, suchas SAP Client. You need to check and adjust the value according to your source system settings, suchas SAP Client as your client or Currency used. And then you will need to index the information spaceto use it.

Procedure1. Log into the explorer tool by user “Administrator”:

http://<hostname>:<port>/explorer 2. Choose Manage Spaces. The available data providers are listed.

3. Choose on related node in left pane Sources. All the deployed information spaces are listed on theright.

4. Find the information space you need from right side, and select Configure from the dropdown listin column Action.

5. Go to Objects tab and click Validate button in the middle of the screen. Input your own variablesand select Next and Finish.

6. Back to the Manage Spaces screen, select Index Now from the dropdown list to index theinformation space.

For detailed information, please refer to general Configuration Guide H30: SAP BusinessObjectsInformation Space and Exploration View.

ResultThe information space and Exploration View are ready to use now.

4.7.3.5 User Roles Creation (Optional)

UseIn this activity, you can create required user roles in your BI Platform. You may define your own userroles based upon your own requirements.

Roles are defined in both BOE server and HANA database. BOE platform can support authorization

on reports level, to show different reports to different users. HANA database provides more preciseauthorization on data level, so even with the same report, different users can get different resultsbased on their authorizations. This document provides recommendation on BOE server side. For eachBOE user, there can be different/same database user matched.




© SAP SE of 27

Procedure1. Log into the CMC portal by the link http://<hostname>:<port>/BOE/CMC

2. Go to the "Users and Groups" management area of the CMC.

3. Click Manage > New > New Group. The "Create New User Group" dialog box appears.

4. Enter the group name and description as above.

Choose OK.

After creating a new group, you can add users, add subgroups, or specify groupmembership so that the new group is actually a subgroup. Because subgroups provide youwith additional levels of organization, they are useful when you set object rights to controlusers' access to your BI content.

5. Go to “Folders” management area of the CMC

6. Navigate to the corresponding reports under Public Folder > SAP > sap.hba > sub folders

7. Right-click on the dashboard or reports which you want to allow above User Group access,choose User Security.

8. In opened dialog box: User Security: Finance Dashboard (e.g.), Click on “Add Principals” button 9. In opened dialog box: Add Principals, chose the User Group which you just created and add it into

right list: Selected users/groups

10. Click “Add and Assign Security”

11. Add access level according to you requirements, then click “Apply” and “OK” then close the box.

ResultYou can assign the end-user to different user groups and control the access of reporting.

4.8 Validating Deployment

4.8.1 HANA Models Validation

Use

To validate the HANA Models, please open them in HANA Studio and preview data.

Procedure1. Choose Start Al l Programs SAP HANASAP HANA Studio to open your SAP HANA Studio.

2. Open menu Window Open Perspect ive and choose SAP HANA Modeler.

3. In the Systems panel, expand the node <HANA server> Content sap hba , you should beable to see your content now.

4. Right click on the data model, and choose Data Preview to check the models.

Check whether all the HANA models have been activated successfully, if not pleasereactivate again.

4.8.2 Applications in HANA Live Validation

Use

To validate the Applications in HANA Live, please open them from browser and check data. You canalso refer to the test script for SAP HANA Live Applications (H01), which is available in SBS guide fordetailed instruction.

ProcedureYou can use the URLs in below table to validate the Applications, after updating the URL with yourhost and HANA instance values. The sample URL uses sample host value ld9191, sample instance




© SAP SE of 27

value 50 and sample SAP client value ‘800’ to provide the URL. To generate your own URLs, youneed to replace the sample values with your own values.

Application URL Sample URL

SAP HANAView Browser

http://<host>:80<SAP HANAinstance>/sap/hba/explorer/ index.html

http://ld9191:8050/sap/hba/explorer/index.html

SAP Invoice andGoods ReceiptReconciliation

http://<host>:80<SAP HANAinstance>/sap/hba/apps/grircm/WebContent/index.html?sap-ui-language=[language]

http://ld9191:8050/sap/hba/apps/grircm/WebContent/index.html?sap-ui-language=EN

SAP Identity Analytics

http://<host>:80<SAP HANAinstance>/sap/hba/apps/grcra-dt/WebContent/app.html

http://ld9191:8050/sap/hba/apps/grcra-dt/WebContent/app.html

SAP SupplyChain InfoCenter

http://<host>:80<SAP HANAinstance>/sap/hba/apps/apoan/WebContent/index.html

http://ld9191:8050/sap/hba/apps/apoan/WebContent/index.html

SAP WorkingCapital

Analytics: DPO

http://<host>:80<SAP HANAinstance>/sap/hba/apps/wca/dpo/WebContent/?SAPClient=<client>

http://ld9191:8050/sap/hba/apps/wca/dpo/WebContent/?SAPClient=800

SAP WorkingCapital

Analytics: DSO

http://<host>:80<SAP HANAinstance>/sap/hba/apps/wca/dso/WebContent/?SAPClient=<client>

http://ld9191:8050/sap/hba/apps/wca/dso/WebContent/?SAPClient=800

Before using the Applications, some authorizations are needed for the user. Such as SAPHANA Live Browser, you will need assign developer role sap.hba.explorer.roles::Developer or

Business user rule sap.hba.explorer.roles::Business. For more authorizations needed, pleaserefer to the Administrator’s Guide.

4.8.3 BOBJ Reports Validation

Use

You can also refer to the test script for SAP HANA Live Reports (H00), which is available in SBS guidefor detailed instruction. It is strongly recommended that this test scripts attached in Step-by-Step guidebe executed to validate the BOBJ reports.

4.9 Implement Classification View service

Use

Classification View service is used to provide deeper analysis based on the classification defined insource system.

For the customer with classification defined in their source system, they can get the HANA Livemodels enhanced to provide analysis based on those definitions. This procedure is described inConfiguration Guide H31. You can follow the steps there to enable the enhancement in HANA.

Procedure1. Choosing the class to be generated and enhanced in your analysis.

2. Generating classification view into HANA with ABAP report.

3. Enhancing generated classification view with texts.4. Joining enhanced classification view with query view.

5. Defining analytical privileges.








© SAP SE of 27

6. Setting up analytics on top of enhanced query view.

ResultThe classification defined in source system could be used for analysis with HANA models.

In case you want to know more about Classification View service, please follow SAP HANA LiveClassification Views (H31), which is Configuration Guide Document available in SBS guide fordetailed instruction.

For Classification View service, it is not mandatory to import and deploy the pre-configuredBOBJ reports or Applications.

4.10 HANA Models, Service, BOBJ Reports and Application ConfigurationGuides

UseIn this activity you start to activate HANA Models, deploy BOBJ Reports used in this solution,

configure Applications, and work with additional Classification View service. Refer to thePrerequisites Matrix and the Configuration Guides shipped with this package for detailedinstructions.

You can find the configuration guide within Step-by-Step guide, from phase Deploy: Train Key Users,there is the link for Content Library. All Configuration Guide links are provided in this page.

You can configure the technical objects by following the Configuration Guide in the below list.

Configuration Guide ID

Configuration Guide ID Configuration Guide Name

H29 Fiori Setup for Smart Business Cockpits

H30 SAP BusinessObjects Information Space and Exploration View

H31 SAP HANA Live Classification Views

H32 Extensibility of SAP HANA Live

H33 SAP HANA Live Browser

H34 SAP HANA Authorization for SAP HANA Live

H35 SAP HANA Live integration with BW

H36 Extensibility of SAP Smart Business Cockpits

H37 Cross System Analytics with SAP HANA Live

H38 SAP Lumira Configuration

H39 Hierarchy with SAP HANA Live

H41 SAP HANA Live for SAP ERP - Finance and Controlling Reports

H43 SAP HANA Live for SAP ERP - Sales and Distribution Reports

H45 SAP HANA Live for SAP ERP - Materials Management Reports

H47 SAP HANA Live for SAP ERP - Production Planning Reports

H49 SAP HANA Live for SAP ERP Plant Maintenance Reports

H51 SAP HANA Live for Insurance Reports

H53 SAP HANA Live for Utilities ReportsH55 SAP HANA Live for SAP CRM Reports




© SAP SE of 27

H57 SAP HANA Live for SAP CRM and SD Cross-Analytics Reports

H59 SAP HANA Live for SAP Overall Equipment Effectiveness Reports

H61 SAP HANA Live for SAP GTS Reports

H63 SAP HANA Live for SAP GRC Reports

H65 SAP HANA Live for SAP Simple Finance Reports

H71 SAP Smart Business Cockpits Apps

H91 SAP Invoice and Goods Receipt Reconciliation App

H93 SAP Identity Analytics App

H95 SAP Supply Chain Info Center App

H97 SAP Working Capital Analytics App

HA1 SAP Landscape Transformation for SAP HANA

V38 SAP BusinessObjects Mobile for iPad Configuration

V39 SAP BusinessObjects Analysis Office with HANA Configuration

You can also check below table for the relationship between different configuration guides and scopeitems.

Configuration Guides for H00 - HANA Live Reports

Scope

Item

Short

Name

Report / App

ConfigurationMobile Explorer Lumira AAO Classification

HANA

Live

Browser

AuthorizationBW

Integration

Cross

System

Analytics

Hierarchy SLT

Extensibility

of SAP

HANA Live

H00

Reports

FI/CO H41

V38 H30 H38 V39 H31 H33 H34 H35 H37

H39 HA1

H32

SD H43

MM H45

PP H47

PM H49

Insurance H51

Utility H53

CRM H55

Cross

CRM/SDH57

OEE

H59GTS H61

GRC H63

Simple

FinanceH65

Configuration Guides for H01 - HANA Live Applications




Scope

Item

Short

Name

Report / App

Configuration

Extensibility of SAP

Smart Business Cockpits

Fiori Setup for Smart

Business cockpits

H01Applications

GR/IR H91

Identity H93

SCIC H95

WCA H97

Smart

Business

App

H71 H36 H29

5 Appendix

5.1 Sample System Access informationPlease remember all the system/port/user information are just sample information provided, andplease update them with your own system access information when you need to execute them.

Rds Shl Hana10v8 Quick Guide en Xx

Documents

Transcript of Rds Shl Hana10v8 Quick Guide en Xx