Rds Shl Hana10v6 Quick Guide en Xx

SAP HANA 1.0

BI Platform 4

SAP HANA Live 1.0

December 2014

English

Quick Guide

SAP SE Dietmar-Hopp-Allee 16 69190 Walldorf Germany

for the SAP HANA Live rapid-deployment solution

SAP Best Practices SAP HANA Live rapid-deployment solution Quick Guide

SAP AG Page 2 of 23

Copyright

2014 SAP SE or an SAP affiliate company. All rights reserved.

No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP SE or an SAP affiliate company.

SAP and other SAP products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP SE (or an SAP affiliate company) in Germany and other countries. Please see http://global.sap.com/corporate-en/legal/copyright/index.epx#trademark for additional trademark information and notices.

Some software products marketed by SAP SE and its distributors contain proprietary software components of other software vendors.

National product specifications may vary.

These materials are provided by SAP SE or an SAP affiliate company for informational purposes only, without representation or warranty of any kind, and SAP SE or its affiliated companies shall not be liable for errors or omissions with respect to the materials. The only warranties for SAP SE or SAP affiliate company products and services are those that are set forth in the express warranty statements accompanying such products and services, if any. Nothing herein should be construed as constituting an additional warranty.

In particular, SAP SE or its affiliated companies have no obligation to pursue any course of business outlined in this document or any related presentation, or to develop or release any functionality mentioned therein. This document, or any related presentation, and SAP SEs or its affiliated companies strategy and possible future developments, products, and/or platform directions and functionality are all subject to change and may be changed by SAP SE or its affiliated companies at any time for any reason without notice. The information in this document is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. All forward-looking statements are subject to various risks and uncertainties that could cause actual results to differ materially from expectations. Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of their dates, and they should not be relied upon in making purchasing decisions.


SAP AG Page 3 of 23

Icons

Icon Meaning

Caution

Example

Note

Recommendation

Syntax

External Process

Business Process Alternative/Decision Choice

Typographic Conventions

Type Style Description

Example text Words or characters that appear on the screen. These include field names, screen titles, pushbuttons as well as menu names, paths and options.

Cross-references to other documentation.

Example text Emphasized words or phrases in body text, titles of graphics and tables.

EXAMPLE TEXT Names of elements in the system. These include report names, program names, transaction codes, table names, and individual key words of a programming language, when surrounded by body text, for example, SELECT and INCLUDE.

Example text Screen output. This includes file and directory names and their paths, messages, source code, names of variables and parameters as well as names of installation, upgrade and database tools.

EXAMPLE TEXT Keys on the keyboard, for example, function keys (such as F2) or the

ENTER key.

Example text Exact user entry. These are words or characters that you enter in the system exactly as they appear in the documentation.


SAP AG Page 4 of 23

Contents

1 Purpose .................................................................................................................................................. 5

2 Positioning .............................................................................................................................................. 5

3 System Preparation ................................................................................................................................ 6

3.1 Technical System Landscape ................................................................................................ 6

3.2 Solution Overview .................................................................................................................. 6

3.3 Checking Software Pre-requisite ........................................................................................... 6

4 Step-by-Step Installation Guide ............................................................................................................. 6

4.1 Install and Configure SAP HANA ........................................................................................... 6

4.1.1 Installing SAP HANA Server .............................................................................................. 7

4.1.2 Installing SAP HANA Client ............................................................................................... 7

4.1.3 Installing SAP HANA Studio .............................................................................................. 7

4.1.4 Configuring HANA studio view........................................................................................... 7

4.1.5 Add HANA Server Instance ............................................................................................... 8

4.1.6 Generating Time Dimension .............................................................................................. 8

4.1.7 HANA JDBC Configuration in BI Platform ......................................................................... 8

4.2 SLT Configuration (Side-by-side only) ................................................................................... 9

4.3 Initial Load and Replication (Side-by-side only) ..................................................................... 9

4.3.1 Initial Load and Replication of ECC Tables ..................................................................... 10

4.3.2 Schema Mapping ............................................................................................................. 11

4.4 Deploying SAP HANA Live .................................................................................................. 12

4.4.1 Importing and Activating HANA Models and Applications ............................................... 12

4.4.2 Checking the Import of HANA models ............................................................................. 14

4.4.3 Checking the Applications ............................................................................................... 14

4.5 Deploying Lumira reports, Predictive analysis reports and BOBJ Reports ......................... 15

4.5.1 Working with Lumira Reports ........................................................................................... 15

4.5.2 Working with Predictive Analysis Reports ....................................................................... 15

4.5.3 Working with reports on BI Platform ................................................................................ 16

4.6 Validating Deployment ......................................................................................................... 19

4.6.1 HANA Models Validation ................................................................................................. 19

4.6.2 Applications in HANA Live Validation .............................................................................. 19

4.6.3 BOBJ Reports Validation ................................................................................................. 20

4.7 Implement Smart Business Applications.............................................................................. 20

4.8 Implement PLM service ....................................................................................................... 20

4.9 HANA Models, Service, BOBJ Reports and Application Configuration ............................... 21

5 Appendix .............................................................................................................................................. 23

5.1 Sample System Access information .................................................................................... 23


SAP AG Page 5 of 23

1 Purpose

This Quick Guide provides information to consultants and customer project members for manually implementing the SAP HANA Live rapid-deployment solution. This guide focuses on the technical implementation aspects and shows all required steps for a successful implementation of the SAP HANA Live rapid-deployment solution and directs you to more detailed documentation if necessary.

Note that the installation of the system landscape is not part of the Rapid-Deployment Solution delivery scope.

2 Positioning

Disclaimer: Please refer the central note 1778607 and 1919137 for release information pertaining to SAP HANA Live for SAP Business Suite and Frontend Server Content for SAP HANA Live Analytical Applications and SAP Smart Business Cockpits.

SAP HANA Live is another product delivered by SAP, provides virtual data models (database views) in SAP HANA for easy analysis and consumption of Business Suite data, including but not limited to ERP, CRM, GRC, GTS, SCM, Insurance Industry and Utility Industry. The Administrators Guide is the guide to install SAP HANA Live product and can be found in the following link http://help.sap.com/hba under section Installation, Security, Configuration, and Operations Information.

However, SAP HANA Live rapid-deployment solution, is supposed to provide pre-defined analysis and enhancement based on this SAP HANA Live product, and therefore SAP HANA Live product is a prerequisite for this rapid-deployment solution.

If you have issues with BOBJ reports or other content for HANA Live rapid-deployment solution, please create message to SV-RDS-HDB component. If you have issues with HANA models deployment, please create message to the corresponding components of the following table:

Modules for HANA Models Component for Message

CRM CRM-ANA-OR

EAM PM-IS

FIN VDM CO-OM-IS, CO-PC-IS, FI-GL-IS

GR/IR (FIN) FI-GL-GL-D

GRC GRC-SAC-ANA (previous XX-PROJ-GRC)

GTS SLL-LEG-ANA (previous XX-PROJ-GT)

HCM CA-MSS-HCM

Insurance Claims FS-CM, FS-ICM, FS-CD

Insurance Policy Mgmt FS-PM, FS-ICM

MM MM-PUR-HBA, MM-IM-HBA

PP PP-IS

Process Observer CA-EPT-POC

Project System PS-ST, PS-IS

Retail (CAR) IS-R-CAR

SCM-APO SCM-APO-ANA

SD Reports SD-HBA-REP


SAP AG Page 6 of 23

SD VDM SD-HBA-VDM

PM SV-RDS-HDB

3 System Preparation

3.1 Technical System Landscape There are three options for technical system landscapes for SAP HANA Live for Business Suite:

1. Integrated scenario - SAP HANA Live shares a SAP HANA appliance with the Business Suite system, whose data is being used for SAP HANA Live. This scenario is recommended for source systems which do run on SAP HANA.

2. Side-by-side scenario - Two separate systems for SAP Business Suite and SAP HANA, where the data is replicated to SAP HANA using the SAP Landscape Transformation (SLT).

3. Side-by-side with BW on HANA integrated scenario It is similar with Scenario 2, but with BW on HANA integrated on the same HANA box.

In each case, SAP BI Platform could connect to the HANA box to provide BOBJ analysis.

Please refer to the Technical System Landscape of the Administrators Guide for detailed technical system landscape information.

In case you want to know more about BW integration with SAP HANA Live, please follow Configuration Guide H35: SAP HANA Live integration with BW, which is Building Block Configuration Guide available in content library for detailed instruction.

3.2 Solution Overview This SAP Rapid Deployment Solution is based on SAP HANA Live for SAP Business Suite 1.0 latest Support Package, and provides pre-configured analysis or enhancement based on the HANA models provided.

3.3 Checking Software Pre-requisite Please refer to the Software Requirement Document for detailed information.

4 Step-by-Step Installation Guide This section provides an overview of the installation procedure. Please refer to the

Installation Steps - General Information of the Administrators Guide for detailed install and configure information.

For the Integrated Scenario option, you may skip sections 4.2 SLT Configuration and 4.3 Initial Load and Replication of this document. Since the ABAP server creates all tables in one specific database catalog schema (typically ) in integrated scenario, this needs to be mapped to the authoring schema of the imported content packages. You may refer to 4.3.2 for schema mapping details.

4.1 Install and Configure SAP HANA The In-Memory Computing Engine consists of the following components:

SAP HANA Server.

SAP HANA Client.

SAP HANA Studio.


SAP AG Page 7 of 23

4.1.1 Installing SAP HANA Server This is a prerequisite and not the part of RDS. SAP HANA is a Software and Hardware combination and therefore this step should be completed by the Hardware vendor.

For detailed instructions on installing the SAP HANA Server, follow the Installation and Upgrade Information available via http://help.sap.com/hana_platform.

4.1.2 Installing SAP HANA Client This is a prerequisite and not the part of RDS. For detailed instruction please refer to http://help.sap.com/hana_platform. Please check especially the SAP HANA Client Installation

and Update Guide. The SAP HANA Client has to be installed for all the users who will access the data in SAP HANA by using some kind of frontend tools, for example Excel, BOBJ Clients etc.

4.1.3 Installing SAP HANA Studio

Use The SAP HANA studio is a collection of applications for the SAP HANA appliance software. It enables technical users to manage the SAP HANA database, to create and manage user authorizations, and to create new or modify existing models of data in the SAP HANA database. It is a client tool, which can be used to access local or remote SAP HANA databases. The SAP HANA studio runs on the Eclipse platform 3.6. For more information about SAP HANA, see the SAP HANA Master Guides at http://help.sap.com/hana_platform. For detailed instructions on installing the SAP HANA Studio, please refer to SAP HANA Studio Installation and Update Guide at http://help.sap.com/hana_platform.

Prerequisite

The Java runtime is accessible either via the PATH or JAVA_HOME variable or by specifying the --vm option.

You are logged on as a local administrator. You have downloaded the installation package from SAP location or from provided share drive.

Procedure 1. Open a command prompt and go to the directory where you unpacked the software. To do this go

to the accessories folder within Windows start menu and select Command Prompt.

2. Call the hdbsetup program by entering the following command:

hdbsetup a studio

3. Choose the activity to be performed.

4. Follow the instructions displayed by Installation Manager.

5. Leave the command prompt after the installation or update was completed

Result SAP HANA studio has been installed or updated.

4.1.4 Configuring HANA studio view

Procedure 1. Choose Start All Programs SAP HANA SAP HANA Studio to open your SAP HANA

studio.

2. Choose menu Window Open Perspective Other... 3. Choose Perspective Modeler.

4. Ensure you have Quick Launch view displays, otherwise choose menu Help Quick Launch.

Result You select the view for HANA modeling.


SAP AG Page 8 of 23

4.1.5 Add HANA Server Instance

Procedure 1. Choose Start All Programs SAP HANA SAP HANA Studio

2. In the Navigator panel, right-click and choose Add System

3. Input the HANA hostname, instance number and Description choose Next > 4. Input your username and password and choose Finish

Result You added one HANA system in your studio.

4.1.6 Generating Time Dimension

Procedure 1. Choose Start All Programs SAP HANA SAP HANA Studio to open your SAP HANA

studio.

2. From the Quick Launch page, choose Generate Time Data.

3. In the Generate Time Data dialog, input values like following:

Field Value Comment

Calendar Type Gregorian

From Year: For example: 1990

To Year: For example: 2030

Granularity: For example: Day

First day of the week: For example: Sunday The first day of the week in your company

4. Choose Generate.

5. Repeat steps 1-4 for the granularities Week, Month and Year. For Month and Year, First day of the week value is not necessary.

6. Check table M_TIME_DIMENSION, M_TIME_DIMENSION_WEEK, M_TIME_DIMENSION_MONTH, M_TIME_DIMENSION_YEAR in schema _SYS_BI to confirm the time generation.

NOTE: For all data that is associated with a timestamp, you would need to convert this into format that contains fields such as hours, days, months, years and so on. Once you generate the time data, a table containing all the time data is created.

4.1.7 HANA JDBC Configuration in BI Platform

Use Setup the JDBC connection to connect HANA box from the BI Platform and BO Explorer as described in the following steps:

When installing or updating new versions of SAP HANA, BI Platform and BO Explorer you should also update the corresponding version of the SAP HANA JDBC driver

Procedure 1. Download HANA client from SAP Service Market Place.

2. Find the file JDBC.TGZ and extract to get ngdbc.jar.

3. Stop BI Platform server.


SAP AG Page 9 of 23

4. Copy the new ngdbc.jar driver to BI Platform server location \SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\jdbc\drivers\newdb\.

5. Copy the new ngdbc.jar driver to BO Explorer server location \ SAP BusinessObjects\Explorer14.0\plugins\com.sap.ngdbc_1.0.0\lib\.

6. Restart server.

7. Copy the file to BI Platform client tools installation location \ SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\ dataAccess\connectionServer\jdbc\drivers \newdb.

If newdb folder cannot be found, please create one folder named newdb.

4.2 SLT Configuration (Side-by-side only) This is a prerequisite and not the part of RDS. The trigger based replication can be activated and monitored with the Synchronization Monitor. Make sure you have installed the SLT component before proceeding with the following sections. All necessary steps are described at SAP HANA Replication Installation Guides at http://help.sap.com/hana_platform.

In case you want to know more about SLT Configuration, please follow Configuration Guide HA1: SAP Landscape Transformation for SAP HANA, which is Building Block Configuration Guide available in content library for detailed instruction.

4.3 Initial Load and Replication (Side-by-side only) The Initial load and replication of source system Tables is very important to get data loaded into HANA. In the table below, the SAP Notes with table lists are available.

The SAP Notes mentioned above may also contain other SAP Notes, which will also contain table lists needed.

Product SAP Note Number Short Description of SAP Note

Authoring Schema

SAP HANA Live for SAP ERP

1781992 Tables for SAP HANA Analytics for ERP 1.0

SAP_ECC

SAP HANA Live for EHP 4 for SAP ERP

1781992 Tables for SAP HANA Analytics for ERP 1.0

SAP_ECC

1847454 Tables for SAP HANA Analytics for FS-CM (Claims Management)

SAP HANA Live for SAP CRM

1782066 Tables for SAP HANA Analytics for CRM 1.0

SAP_CRM

SAP HANA Live for SAP SCM

1782067 Tables for SAP HANA Analytics for SCM 1.0

SAP_SCM

SAP HANA Live for SAP solutions for

1782068 Tables for SAP HANA Live for GRC

SAP_GRC


SAP AG Page 10 of 23

GRC 1.0

2027728 Tables for HANA Live for GRC 10.1 ORM Virtual Data Model

SAP_GRC

SAP HANA Live for SAP GTS

1780655 Tables for SAP HANA Analytics for GTS 1.0

SAP_GTS

SAP HANA Live for Policy Management

1918954 SAP HANA: Prerequisites for Reporting

SAP_FSPM

SAP HANA Live for Manufacturing

1803129 Table for SAP Overall Equipment Effectiveness 1.0

SAP_ECC

SAP_OEE

SAP_MII

SAP HANA Live for SAP Transportation Management

1918523 Tables for SAP HANA Live for Transportation Management

SAP_TM

SAP HANA Live for Event Management

1918524 Tables for SAP HANA Live for Event Management

SAP_EM

SAP HANA Live for Extended Warehouse Management

1952597 Tables for SAP HANA Live for Extended Warehouse Management

SAP_EWM

SAP HANA Live for the financials add-on for SAP Business Suite powered by SAP HANA

1967268 Tabellen fr SAP HANA Live for Smart Financials 1.0

SAP_ECC

SAP HANA Live for Financial Close

1919584 Tables for SAP Smart Business for financial close

SAP_FCC

SAP HANA Live for Utilities, edition for SAP ERP

1992866 Tables for SAP HANA Live for Utilities, edition for SAP ERP

SAP_ECC

SAP HANA Live for SAP CRM and SAP ERP cross-analytics

2035874 Tables for SAP HANA Live for SAP CRM and SAP ERP cross-analytics

SAP_CRM

SAP_ECC

The tables can be added by loading files downloaded from SAP Notes, instead of adding tables manually one by one.

After reading the Solution Scope and Configuration Guide documents, you can identify the tables that must be loaded and replicated from source system. The initial load process can take some time to complete and depends on the size of the data being loaded into HANA server. Additional details may be found in the following document: Application Operations Guide Trigger-Based Data Replication Using SAP LT Replication Server for SAP HANA at http://help.sap.com/hana_platform.

4.3.1 Initial Load and Replication of ECC Tables The following sections use ECC as an example to show how this process is performed, for other SAP Business Suite systems such as CRM; you can refer the similar process.



Prerequisite The SLT configuration has been setup successfully. Make sure DD02L and DD02T tables are created and data is replicated completely.

Procedure 1. Choose StartAll ProgramsSAP HANA SAP HANA Studio to open your SAP HANA studio.

2. In the Quick Launch view, choose Select System and choose the correct HANA server.

3. From the Quick Launch tab page, choose Data Provisioning.

4. In the Data Provisioning Page, choose the correct source system.

5. Choose button Replicate.

6. In the Load Request dialog, input values from above mentioned SAP Notes, choose button Add to make it in the selected section.

Please note that the replication for big tables may need some time to complete. Therefore, it is recommended to load big tables as last step e.g. BSEG, BKPF, FAGLFLEXA.

7. Choose Finish to load all the tables.

4.3.2 Schema Mapping

Use The delivered packages refer to a pre-defined schema, such as SAP_ECC, are called authoring schema. To refer the views in the packages to the replication schema, a schema mapping must be defined in the SAP HANA database via the SAP HANA studio.

For example, package sap.hba.ecc refers to authoring schema SAP_ECC. In your system landscape the tables from your SAP ECC system are replicated into replication schema . Then a schema mapping has to be set up from SAP_ECC to .

The table below shows the relationship between delivered packages and their authoring schema:

Package Authoring Schema

SAP HANA Live for SAP ERP


SAP_ECC

SAP HANA Live for SAP CRM SAP_CRM

SAP HANA Live 1.0 for SAP SCM SAP_SCM

SAP HANA Live for SAP solutions for GRC SAP_GRC

SAP HANA Live 1.0 for SAP GTS SAP_GTS

SAP HANA Live 1.0 for Policy Management SAP_FSPM

SAP HANA Live for Manufacturing SAP_ECC

SAP_OEE

SAP_MII

SAP HANA Live for SAP Transportation Management

SAP_TM

SAP HANA Live for SAP Event Management SAP_EM

SAP HANA Live for Extended Warehouse Management

SAP_EWM

SAP HANA Live for Insurance SAP_ECC

SAP_FSPM

SAP HANA Live for the SAP Simple Finance SAP_ECC



add-on for SAP Business Suite powered by SAP HANA

SAP HANA Live for Financial Close SAP_FCC


SAP_ECC

SAP HANA Live for Utilities, edition for SAP CRM

SAP_CRM

SAP HANA Live for SAP Business Suite foundation component

SAP_FND

SAP HANA Live for SAP CRM and SAP ERP cross-analytics

SAP_CRM

SAP_ECC

SAP HANA Live for Retail SAP_ECC

Procedure 1. Choose StartAll ProgramsSAP HANASAP HANA Studio to open your SAP HANA studio.

2. From the Quick Launch page, choose Schema Mapping.

3. In the Schema Mapping dialog, enter the following values:

Field Sample Value

Authoring Schema SAP_ECC

Physical Schema

4. Choose button OK.

5. Check table M_SCHEMA_MAPPING in schema _SYS_BI to confirm the proper mapping

4.4 Deploying SAP HANA Live

4.4.1 Importing and Activating HANA Models and Applications

Procedure 1. Download the HANA content package of SAP HANA Live product via Service Market Place,

following the steps in SAP Note 1846294.

You will find the below items for HANA Live product:

Name Technical Name Official Name

SAP HANA ANALYTICS FOR ERP HCO_HBA_ECC SAP HANA Live for SAP ERP

SAP HANA ANALY. ERP EHP4 HCO_HBA_ECCFND701,

HCO_HBA_FSCX604


SAP HANA ANALYTICS FOR CRM HCO_HBA_CRM SAP HANA Live for SAP CRM

SAP HANA ANALYTICS FOR GRC HCO_HBA_GRC SAP HANA Live for SAP solutions for GRC

SAP HANA ANALYTICS FOR GTS HCO_HBA_GTS SAP HANA Live for SAP GTS

SAP HANA ANALY. FOR FS-PM HCO_HBA_FSPM510 SAP HANA Live for Policy Management

SAP HANA ANALYTICS FOR SCM HCO_HBA_SCM_APO SAP HANA Live for SAP SCM



SAP HANA ANALY. FOR MANUF. 1.0

HCO_HBA_OEE,

OEE_ERP (OEE ERP INTERFACE 1.0)

OEE_MII (MFG MII CONTENT 1.0)

SAP HANA Live for Manufacturing

SAP GRC ANALYTICS HCO_HBA_APPS_GRCA SAP Access Control Role Analytics

SAP GRIR MONITOR HCO_HBA_APPS_GRIRM SAP Invoice and Goods Receipt Reconciliation

SAP APO ANALYTICS HCO_HBA_APPS_APOAN SAP Supply Chain Info Center

SAP WORKING CAPITAL ANALYTICS

HCO_HBA_A_WCA_DSO_S,

HCO_HBA_A_WCA_DSO_U,

HCO_HBA_A_R_APF,

HCO_HBA_A_WCA_DPO_S,

HCO_HBA_A_WCA_DPO_U

SAP Working Capital Analytics

SAP HANA CONTENT TOOLS HCO_HBA_AF_EXPLORER SAP HANA Live Browser

HCO_HBA_AAA SAP HANA Live Authorization Assistant

HCO_HBA_T_EXTN SAP HANA Live Extensibility Plug-in

SAP HANA ANALY TICS FOR INS 1.0

HCO_HBA_X_INS01

SAP HANA Live for Insurance

SAP HANA ANALY TICS F. CRMX 1.0

HCO_HBA_X_CRM SAP HANA Live for SAP CRM and SAP ERP cross-analytics

SAP HANA ANALY TICS FOR ISU 1.0

HCO_HBA_ISUECC


SAP HANA ANALY. F. CRM-IU HCO_HBA_CRMIU SAP HANA Live for Utilities, edition for SAP CRM

SAP HANA ANALY. F. GRC10.1 HCO_HBA_GRC101 SAP HANA Live for SAP solutions for GRC 10.1

SAP HANA ANALY. F. FND HCO_HBA_FND SAP HANA Live for SAP Business Suite foundation component

SAP HANA ANALY. FOR SFIN HCO_HBA_SFIN700 SAP HANA Live for the SAP Simple Finance add-on for SAP Business Suite powered by SAP HANA

SAP HANA ANALYTICS FOR FCC HCO_HBA_FCC SAP HANA Live for Financial Close

SAP HANA ANALYTICS FOR EM HCO_HBA_EM SAP HANA Live for Event Management

SAP HANA ANALYTICS FOR TM HCO_HBA_TM SAP HANA Live for Transportation Management

SAP HANA ANALY. FOR EWM HCO_HBA_EWM SAP HANA Live for Extended Warehouse Management



SAP HANA ANALYTICS F. RTL HCO_HBA_RTL SAP HANA Live for Retail

You can then download the zip files for the HANA Models.

For SAP HANA Live Plant Maintenance, you can follow the steps in SAP Note 1846294 to download.

Get the corresponding .tgz files from the .zip files.

2. Choose StartAll ProgramsSAP HANASAP HANA Studio to open your SAP HANA studio.

3. Choose menu FileImport, click on SAP HANA Content and select Delivery Unit.

4. Click on Next and select the target HANA system.

5. Click on Next, choose client radio button then browse for file

6. Import dialog, set the following values:

Field name User action and values Comment

Select file Client

Select the filename *.tgz This file is included with download content

Overwrite inactive versions

Checked

Activate objects Checked

7. Click Finish to import the content.

8. Check job log.

NOTE: To get more insight on how to leverage SAP HANA Live content to amalgamate SAP data coming from different SAP Business Suite source systems to provide a central view for use in reporting and analytics, please refer to Configuration guide H37 in Step-by-Step guide.

NOTE: You can also leverage Lifecycle Management function in HANA Studio to install the HANA content. For more information, please refer to http://help.sap.com/hana_appliance.

4.4.2 Checking the Import of HANA models

Procedure 1. Choose StartAll ProgramsSAP HANASAP HANA Studio to open your SAP HANA studio.

2. Open menu WindowOpen Perspective and choose Modeler.

3. In the navigator panel, expand the node Content sap hba, you should be able to see your content now.

Check whether all the HANA models have been activated successfully, if not please reactivate again.

4.4.3 Checking the Applications

To check the install of Applications, you can refer to the BPD documents on Applications (H01), which



are Business Process Documents available in SBS guide for detailed instruction.

Before using the Applications, some authorizations are needed for the user. Such as SAP HANA Live Browser, you will need assign developer role sap.hba.explorer.roles::Developer or Business user rule sap.hba.explorer.roles::Business. For more authorizations needed, please refer to the Administrators Guide.

4.5 Deploying Lumira reports, Predictive analysis reports and BOBJ Reports

4.5.1 Working with Lumira Reports

Use The Lumira reports are packaged and published in Service Market Place. You can follow the steps below to get them work.

There are different Lumira files for different scope items, including SAP ERP FI/CO, SD, MM, PP, SAP GTS, SAP OEE, Cross SD/CRM, and SAP Utility Industry.

NOTE: SAP Lumira reports are delivered as .lums files, and do not need to deploy to BI platform. You can open it from your local machine where SAP Lumira installed.

Procedure 1. Download the .zip file via the link described in SAP Note 1846294.

2. Download and install SAP Lumira from SAP service market place.

3. Open the .lums file in the .zip file with SAP Lumira, input your own HANA Connect information, and click Connect button.

4. Choose menu Data->Edit, click Edit Variables in the popup screen. Input your own value for the variables, such as SAP Client, and click OK to refresh the report with your own data.

Result The Lumira reports are showed in your desktop.

4.5.2 Working with Predictive Analysis Reports

Use The Predictive Analysis reports are packaged and published in Service Market Place. You can follow the steps below to get them work.

There is only one Predictive Analysis report for current version, focus on Plant Maintenance analysis.

NOTE: SAP Predictive Analysis reports are delivered as .lums files, and do not need to deploy to BI platform. You can open it from your local machine with SAP Predictive Analysis installed.

NOTE: Currently SAP Predictive Analysis and SAP Lumira could not be installed to the same laptop.

Procedure 1. Download the .zip file following the steps in SAP Note 1846294.



2. Download and install SAP Predictive Analysis from SAP service market place.

3. Open the .lums file in the .zip file with SAP Predictive Analysis, input your own HANA Connect information.

4. Choose menu Data->Edit, click Edit Variables in the popup screen. Input your own value for the variables, such as SAP Client, and click OK to refresh the report with your own data.

Result The Predictive Analysis reports are showed in your desktop.

4.5.3 Working with reports on BI Platform

4.5.3.1 Importing LCMBIAR file

Use The BOBJ reports are packaged to .LCMBIAR files. You can follow the steps below to import the LCMBIAR file to your BI Platform.

There are different .LCMBIAR files for different scope items, including SAP ERP Finance, SAP ERP Sales and Distribution, SAP ERP Materials Management, SAP ERP Product Planning, SAP GTS, SAP GRC, SAP CRM, and SAP Insurance.

Please note there are Dashboards, Web Intelligence reports, Crystal Reports, Information Spaces & Exploration View, Design Studio reports, and Analysis Workspace for OLAP in different areas of FI, CO, SD, MM, PP, GTS, GRC, CRM, and Insurance Industry. Also, this archive file contains Universes, Universe connection objects which must be pointed to the HANA System, as these Universes are created on top of HANA models. The BOBJ Reports are based on the Universes except for the Information Spaces, Exploration Views, Design Studio reports, and Analysis Workspace for OLAP.

Procedure 1. Download the BOBJ reports package via the link described in SAP Note 1846294.

2. Log into the Central Management Console tool by user Administrator.

http://:/BOE/CMC.

3. Select Promotion Management.

4. In the Promotion Jobs home page, select Import Import from file. The Import from file window appears.

5. Browse the .LCMBIAR file from your local driver and click OK.

6. Select the folder in which you want to save the job.

7. Choose your CMS system from Destination Drop-down.

8. Click Create. A new job is created and stored in the CMS repository.

9. Click on Promote button and the Promote - window appears.

10. Enter the Change Management ID if necessary.

11. Click on Promote button. The importing of LCMBIAR file will be in progress.

12. Please check that the LCMBIAR file is promoted successfully.

Result The LCMBIAR file is imported to your BI Platform.

4.5.3.2 Adapting Connection for Universe

Use In this activity, you will adapt the universe connection and switch to your own HANA box.

Procedure 1. Start the Information Design Tool from the BusinessObjects Enterprise programs list.



2. In the Repository Resources window, click on to add the CMS system.

3. In the popup dialog box, enter server (IP of CMS):6400, username, password and click on OK.

4. Expand the node Connections SAP, you will find several connections available here:

Connection Name Usage

SAP_ECC Works for ERP reporting, such as FI, CO, SD, MM, PP, etc.

SAP_GTS Works for GTS reporting.

SAP_GRC Works for GRC reporting.

SAP_INS Works for Insurance reporting.

5. Right click on the connection you want to change, and choose Edit.

6. In the right window click Edit.

7. In the popup dialog Edit Relational Connection window, enter the User name, Password and update your host id and port id with the information provided by your HANA administrator. Host ID: :3xx15, where xx is your instance number; E.G. If instance number is 01 then host ID would be :30115

8. Click Test Connection to test if your setting is okay.

9. Choose Finish.

10. Save your setting.

Result The connection has been adapted to your own HANA system, and you will be able to run the pre-defined reports and create Information Spaces on top of HANA models on your own.

4.5.3.3 Adapting OLAP Connection

Use In this activity, you will adapt the OLAP Data Source Connection and switch to your own HANA box.

Procedure 1. Start the Central Management Console.

For example, on Windows, click Start > Programs > SAP BusinessObjects Business Intelligence platform 4 > SAP BusinessObjects Business Intelligence platform > Central Management Console.

2. Log on to the Central Management Console.

3. In the Organize area in the CMC, select OLAP Connections.

A list of existing connections is displayed.

OLAP Connection Name Usage

SAP_ECC_OLAP Works for ERP OLAP reporting

SAP_CRM_OLAP Works for CRM OLAP reporting.

If no connections are listed, you need to create a new OLAP connection to allow your data analysts to begin working with Analysis workspaces.

4. Select the connection that you want to edit, here we choose SAP_ECC_OLAP as sample, and click Edit Connection. You can now change the contents of any of the fields to reconfigure your OLAP connection.

If you do not have "Add objects to the folder" permission in the BI platform system, you cannot edit a connection, and the Edit Connection button is unavailable.



5. Click Save to save the new connection settings.

6. Update another OLAP connection SAP_CRM_OLAP by doing step 1 step 5 again.

Result The OLAP connections have been adapted to your own HANA system, and you will be able to run the pre-defined reports and create Analysis edition for OLAP and Design Studio reports on top of HANA models on your own.

4.5.3.4 Working with Information Space and Exploration View

Use In this activity, you will index the Information Space which helps you to get the latest data to consume in the Information Space and Exploration View reports. There is some default values defined for information space when it is released, since it is mandatory value required by the HANA model, such as SAP Client. You need to check and adjust the value according to your source system settings, such as SAP Client as your client or Currency used. And then you will need to index the information space to use it.

Procedure 1. Log into the explorer tool by user Administrator:

http://:/explorer

2. Choose Manage Spaces. The available data providers are listed.

3. Choose on related node in left pane Sources. All the deployed information spaces are listed on the right.

4. Find the information space you need from right side, and select Configure from the dropdown list in column Action.

5. Go to Objects tab and click Validate button in the middle of the screen. Input your own variables and select Next and Finish.

6. Back to the Manage Spaces screen, select Index Now from the dropdown list to index the information space.

For detailed information, please refer to general Configuration Guide H30: SAP BusinessObjects Information Space and Exploration View.

Result The information space and Exploration View are ready to use now.

4.5.3.5 User Roles Creation (Optional)

Use In this activity, you can create required user roles in your BI Platform. You may define your own user roles based upon your own requirements.

Roles are defined in both BOE server and HANA database. BOE platform can support authorization on reports level, to show different reports to different users. HANA database provides more precise authorization on data level, so even with the same report, different users can get different results based on their authorizations. This document provides recommendation on BOE server side. For each BOE user, there can be different/same database user matched.

Procedure 1. Log into the CMC portal by the link http://:/BOE/CMC

2. Go to the "Users and Groups" management area of the CMC.

3. Click Manage > New > New Group. The "Create New User Group" dialog box appears.

4. Enter the group name and description as above.



5. Choose OK.

After creating a new group, you can add users, add subgroups, or specify group membership so that the new group is actually a subgroup. Because subgroups provide you with additional levels of organization, they are useful when you set object rights to control users' access to your BI content.

6. Go to Folders management area of the CMC

7. Navigate to the corresponding reports under Public Folder > SAP > sap.hba > sub folders

8. Right-click on the dashboard or reports which you want to allow above User Group access, choose User Security.

9. In opened dialog box: User Security: Finance Dashboard (e.g.), Click on Add Principals button

10. In opened dialog box: Add Principals, chose the User Group which you just created and add it into right list: Selected users/groups

11. Click Add and Assign Security

12. Add access level according to you requirements, then click Apply and OK then close the box.

Result You can assign the end-user to different user groups and control the access of reporting.

4.6 Validating Deployment

4.6.1 HANA Models Validation

Use

To validate the HANA Models, please open them in HANA Studio and preview data.

4.6.2 Applications in HANA Live Validation

Use

To validate the Applications in HANA Live, please open them from browser and check data.

Procedure

You can use the URLs in below table to validate the Applications, after updating the URL with your host and HANA instance values. The sample URL uses sample host value ld9191, sample instance value 50 and sample SAP client value 800 to provide the URL. To generate your own URLs, you need to replace the sample values with your own values.

Application URL Sample URL

SAP HANA View Browser

http://:80/sap/hba/explorer/ index.html

http://ld9191:8050/sap/hba/explorer/index.html

SAP Invoice and Goods Receipt Reconciliation

http://:80/sap/hba/apps/grircm/WebContent/index.html?sap-ui-language=[language]

http://ld9191:8050/sap/hba/apps/grircm/WebContent/index.html?sap-ui-language=EN

SAP Identity Analytics

http://:80/sap/hba/apps/grcra-dt/WebContent/app.html

http://ld9191:8050/sap/hba/apps/grcra-dt/WebContent/app.html

SAP Supply Chain Info Center

http://:80/sap/hba/apps/apoan/WebContent/index.html

http://ld9191:8050/sap/hba/apps/apoan/WebContent/index.html

SAP Working Capital Analytics: DPO

http://:80/sap/hba/apps/wca/dpo/WebContent/?SAPClient=

http://ld9191:8050/sap/hba/apps/wca/dpo/WebContent/?SAPClient=800



Application URL Sample URL

SAP Working Capital Analytics: DSO

http://:80/sap/hba/apps/wca/dso/WebContent/?SAPClient=

http://ld9191:8050/sap/hba/apps/wca/dso/WebContent/?SAPClient=800

4.6.3 BOBJ Reports Validation

Use

For each of the delivered BOBJ report there is a test plan script available. It is strongly recommended that this test scripts attached in Step-by-Step guide be executed to validate the BOBJ reports.

4.7 Implement Smart Business Applications

Use

SAP Smart Business applications provide insight into the real-time operations of your business by collecting and displaying KPIs directly in your browser. To do this, SAP Smart Business combines the data and analytical power of SAP HANA with the integration and interface components of SAP Business Suite.

There are 13 Smart Business Applications covered in this package. The installation process is not covered in the RDS, but is taken as prerequisite. Please refer to the Administrators Guide in http://help.sap.com/ssb for the installations. In case you want to know more about Smart Business Applications configuration, please follow Smart Business Applications (H01), which is Business Process Document available in SBS guide for detailed instruction.

4.8 Implement PLM service

Use

PLM service is used to provide deeper analysis based on the classification defined in source system.

For the customer with classification defined in their source system, they can get the HANA Live models enhanced to provide analysis based on those definitions. This procedure is described in Configuration Guide H31. You can follow the steps there to enable the enhancement in HANA.

Procedure 1. Choosing the class to be generated and enhanced in your analysis.

2. Generating classification view into HANA with ABAP report.

3. Enhancing generated classification view with texts.

4. Joining enhanced classification view with query view.

5. Defining analytical privileges.

6. Setting up analytics on top of enhanced query view.

Result The classification defined in source system could be used for analysis with HANA models.

In case you want to know more about PLM service, please follow SAP HANA Live for PLM (H31), which is Configuration Guide Document available in SBS guide for detailed instruction.

For PLM service, it is not mandatory to import and deploy the pre-configured BOBJ reports or Applications.



4.9 HANA Models, Service, BOBJ Reports and Application Configuration

Use In this activity you start to activate HANA Models, deploy BOBJ Reports used in this solution, configure Applications, and work with additional PLM service. Refer to the Prerequisites Matrix and the Configuration Guides shipped with this package for detailed instructions.

You can find the configuration guide within Step-by-Step guide, from phase Deploy: Train Key Users, there is the link for Content Library. All Configuration Guide links are provided in this page.

You can configure the technical objects by following the Configuration Guide in the below list.

Configuration Guide ID

Configuration Guide ID Configuration Guide Name

H30 SAP BusinessObjects Information Space and Exploration View Configuration

H31 SAP PLM configuration

H32 Extensibility of SAP HANA Live

H33 SAP HANA Live Browser

H34 Authorization of SAP HANA Live

H35 SAP HANA Live integration with BW

H36 Extensibility of SAP Smart Business

H37 Cross System Reporting with SAP HANA Live Content

H38 SAP Lumira Configuration

H40 HANA Model Configuration - SAP ERP Finance and Controlling

H41 BOBJ Report Configuration - SAP ERP Finance and Controlling

H42 HANA Model Configuration - SAP ERP Sales and Distribution

H43 BOBJ Report Configuration - SAP ERP Sales and Distribution

H44 HANA Model Configuration - SAP ERP Materials Management

H45 BOBJ Report Configuration - SAP ERP Materials Management

H46 HANA Model Configuration - SAP ERP Production Planning

H47 BOBJ Report Configuration - SAP ERP Production Planning

H48 HANA Model Configuration - SAP ERP Plant Maintenance

H49 BOBJ report Configuration - SAP ERP Plant Maintenance

H50 HANA Model Configuration - SAP Insurance

H51 BOBJ Report Configuration - SAP Insurance

H52 HANA Model Configuration - SAP Utility

H53 BOBJ Report Configuration - SAP Utility

H54 HANA Model Configuration - SAP CRM

H55 BOBJ Report Configuration - SAP CRM

H56 HANA Model Configuration - SAP CRM and SD Cross Analysis

H57 BOBJ Report Configuration - SAP CRM and SD Cross Analysis

H58 HANA Model Configuration - SAP Overall Equipment Efficiency



H59 BOBJ report Configuration - SAP Overall Equipment Efficiency

H60 HANA Model Configuration - SAP GTS

H61 BOBJ Report Configuration - SAP GTS

H62 HANA Model Configuration - SAP GRC

H63 BOBJ Report Configuration - SAP GRC

H90 HANA Model Configuration - SAP Invoice and Goods Receipt Reconciliation

H91 Application Configuration - SAP Invoice and Goods Receipt Reconciliation

H92 HANA Model Configuration - SAP Identity Analytics

H93 Application Configuration - SAP Identity Analytics

H94 HANA Model Configuration - SAP Supply Chain Info Center

H95 Application Configuration - SAP Supply Chain Info Center

H96 HANA Model Configuration - SAP Working Capital Analytics

H97 Application Configuration - SAP Working Capital Analytics

H70 HANA Models Configuration - SAP Smart Business Cockpits

H71 Application Configuration - Smart Business Applications

H72 HTML5 App Configuration - SAP Smart Business for Project Execution

H73 HTML5 App Configuration - SAP Smart Business for Cash Management

H74 HTML5 App Configuration - SAP Smart Business for Financial Close

H75 HTML5 App Configuration - SAP Smart Business for Access Control Management

H76 HTML5 App Configuration - SAP Smart Business for Inventory Management

H77 HTML5 App Configuration - SAP Smart Business for Purchasing

H78 HTML5 App Configuration - SAP Smart Business for Transportation Management

H79 HTML5 App Configuration - SAP Smart Business for Event Management

H80 HTML5 App Configuration - SAP Smart Business for Sales Order Fulfillment

H81 HTML5 App Configuration - SAP Smart Business for Extended Warehouse Management

H82 HTML5 App Configuration - SAP Smart Business for Account Receivable

H83 HTML5 App Configuration - SAP Smart Business for Account Payable

H84 HTML5 App Configuration - SAP Smart Business for Retail Promotion Execution

HA1 SLT Configuration and Troubleshooting

V38 SAP BusinessObjects Mobile Application Deployment



V39 SAP BusinessObjects Analysis Office with HANA Configuration Guide

5 Appendix

5.1 Sample System Access information Please remember all the system/port/user information are just sample information provided, and please update them with your own system access information when you need to execute them.

Rds Shl Hana10v6 Quick Guide en Xx

Documents

Transcript of Rds Shl Hana10v6 Quick Guide en Xx