QHL CATEGORY

EOTP ONE-PIECE EXTERNAL TOOL POST U-2

IOTP ONE-PIECE EXTERNAL TOOL POST U-3

EXTERNAL TURNING TOOL SYSTEM U-5~10

PSC / ER COLLET CHUCK U-11

PSC / SFC SHRINK FIT CHUCK U-12~13

PSC / SFC SHRINK FIT CHUCK [COOLANT TYPE] U-14~15

PSC / SLN SIDE LOCK END MILL HOLDER U-16

PSC / SLN SIDE LOCK END MILL HOLDER [COOLANT TYPE] U-17

PSC / SPD HIGH SPEED DRILL U-18~19

INDEXABLE HIGH SPEED DRILL U-20~25

PSC / STFC INTERNAL BORING BAR U-26

AL ADAPTER U-27

HIGH-PRESSURE COOLANT PIPE U-28

General catalogueU-2

QH

L

MODEL NO. TYPE L l1 l2 l3 l4 l5 d d1 d2 d3APPLICABLE

TYPEWEIGHT

(KGS)

305.C4.TLE.OR EOTP40 - OR 108.5 24.5 43.5 35 26 54 76 105 50 49 PSC40 2.81

305.C4.TLE.HAAS EOTP40 - HA 101 24.5 44.1 45 26 54 70 90 50 49 PSC40 2.40

305.C4.TLE.MORI EOTP40 - MO 108.5 24.5 44 35 26 54 76 105 50 49 PSC40 2.88

305.C4.TLE.MAZAK EOTP40 - MA 104 24.5 32.75 60 33.5 45 84 104 49 47.75 PSC40 2.90

305.C4.TLE.GW EOTP40 - GW 114 24.5 49 35 26 54 76 105 50 49 PSC40 2.99

EOTP ONE-PIECE EXTERNAL TOOL POSTEOTP 一體式外徑刀座

Features:▸ One-piece structure with tool post and AL adapter, with high rigidity and great convenience.▸ Quick change design.▸ Needn’t be connected with high-pressure coolant pipe: internal coolant supply 70BAR.Product information:▸ Refer to P.H-4 for turning tool.

ＴＷ PAT NO. M507816ＪＰ PAT NO. 3203371ＤＥ PAT NO. Nr.202016100572

General catalogue U-3

QH

L

Features:▸ One-piece structure with tool post and AL adapter, with high rigidity and great convenience.▸ Quick change design.▸ Needn’t be connected with high-pressure coolant pipe: internal coolant supply 70BAR.

l2 l3

d

L

l1

IOTP ONE-PIECE INTERNAL TOOL POSTIOTP 一體式內徑刀座

MODEL NO. TYPE L l1 l2 l3 d APPLICABLE TYPE

WEIGHT(KGS)

305.C4.HAAS IOTP40 - HA 60 30.4 21.3 45 70 PSL40 2.70305.C4.MAZAK IOTP40 - MA 93.2 63 10 60 84 PSL40 4.41305.C4.MORI IOTP40 - MO 80 46 25 35 76 PSL40 4.10305.C4.OR IOTP40 - OR 81 46 25 35 76 PSL40 4.15305.C4.GW IOTP40 - GW 75 40 25 35 76 PSL40 4.20

ＴＷ PAT NO. M507816ＪＰ PAT NO. 3203371ＤＥ PAT NO. Nr.202016100572

General catalogueU-4

QH

L

DESIGNATION OF PSC

INTERFACE SIZE

PSC32 (C3)

PSC40 (C4)

PSC50 (C5)

PSC63 (C6)

PSC80 (C8)

PSC80X (C8X)

CLAMP MECHANISM

A Back clamp system M Multi-clamp system

C Clamp-on system P Pin lock system

D Double clamp system S Screw-on system

E Off-set pin system T Taper lock system

JS Screw-on system W Wedge-on system

JT Back clamp system

INSERTCLEARANCE

A 3°

B 5°

C 7°

D 15°

E 20°

F 25°

G 30°

N 0°

P 11°

TOOL LENGTH, METRIC

d1 DIMENSION

PSC 編碼原則

INSERT EDGE LENGTH

Insertinscribed circle

6.35 7.94 9.525 12.00 12.70

80° 06 08 09 - 12

55° 07 - 11 - 15

35° 11 - 16 - -

- - - 12 -

11 13 16 - 22

- - 09 - 12

- - 06 - 08

PSC 63 M C L N R 45 12065- -

INSERT GEOMETRY

C 80°

D 55°

K 55°

R

S

T

V 35°

W 80°

L

H 120°

A 85°

B 82°

E 75°

M 86°

O 135°

P 108°

HEAD

N

R

L

CUTTING EDGE GEMOETRY

A - 90° M - 50°

B - 75° N - 63°

C - 90° P - 117.5°

D - 45° R - 75°

E - 60° S - 45°

F - 90° T - 60°

G - 90° U - 93°

H - 107.5° V - 72.5°

J - 93° W - 60°

K - 75° Y - 85°

L - 95°

General catalogue U-5

QH

L

Accessory:Insert Clamp Shim Screw Screw

WN..0804 MC620 WMS432 MS630 MLP46L-A

PSC / MWLN EXTERNAL TURNING TOOL

d1

l1

L d2

5°

5°

MODEL NO. TYPE L l1 d1 d2 Insert

140.478.08R.045 PSC32 - MWLNR - 22045 - 08 64 45 22 18.1 WN..0804140.478.08L.045 PSC32 - MWLNL - 22045 - 08 64 45 22 18.1 WN..0804141.478.08R.050 PSC40 - MWLNR - 27050 - 08 74 50 27 22.5 WN..0804141.478.08L.050 PSC40 - MWLNL - 27050 - 08 74 50 27 22.5 WN..0804

PSC / MWLN 外徑車刀2

Product information:▸ Inserts are optional accessories. Need to be purchased additionally.

Product information:▸ Inserts are optional accessories. Need to be purchased additionally.

PSC / MTJN EXTERNAL TURNING TOOL

Ll1

d1

3°

d2

8°

MODEL NO. TYPE L l1 d1 d2 Insert

140.477.16R.045 PSC32 - MTJNR - 22045 - 16 64 45 22 18.1 TN..1604140.477.16L.045 PSC32 - MTJNL - 22045 - 16 64 45 22 18.1 TN..1604141.477.16R.050 PSC40 - MTJNR - 27050 - 16 74 50 27 22.5 TN..1604141.477.16L.050 PSC40 - MTJNL - 27050 - 16 74 50 27 22.5 TN..1604

PSC / MTJN 外徑車刀2

Accessory:Insert Clamp Shim Screw Screw

TN..1604 MC620 TMS322 MS630 MLP34L-A

General catalogueU-6

QH

L

PSC / MCLN EXTERNAL TURNING TOOL

d1

Ll1

d2

5°8°

MODEL NO. TYPE L l1 d1 d2 Insert

140.475.12R.045 PSC32 - MCLNR - 22045 - 12 64 45 22 18.1 CN..1204140.475.12L.045 PSC32 - MCLNL - 22045 - 12 64 45 22 18.1 CN..1204141.475.12R.050 PSC40 - MCLNR - 27050 - 12 74 50 27 22.5 CN..1204141.475.12L.050 PSC40 - MCLNL - 27050 - 12 74 50 27 22.5 CN..1204

PSC / MCLN 外徑車刀

Accessory:Insert Clamp Shim Screw Screw

CN..1204 MC620 MCS432 MS620 MLP46L-A

2

PSC / MDJN EXTERNAL TURNING TOOL

l1L

d1

d2

2º7º

MODEL NO. TYPE L l1 d1 d2 Insert

140.476.15R.045 PSC32 - MDJNR - 22045 - 15 64 45 22 18.1 DN..1504140.476.15L.045 PSC32 - MDJNL - 22045 - 15 64 45 22 18.1 DN..1504141.476.15R.050 PSC40 - MDJNR - 27050 - 15 74 50 27 22.5 DN..1504141.476.15L.050 PSC40 - MDJNL - 27050 - 15 74 50 27 22.5 DN..1504

PSC / MDJN 外徑車刀

Accessory:Insert Clamp Shim Screw Screw

DN..1504 MC622 DMS442 MS630 MLP46L-A

2

Product information:▸ Inserts are optional accessories. Need to be purchased additionally.

Product information:▸ Inserts are optional accessories. Need to be purchased additionally.

General catalogue U-7

QH

L

PSC / DWLN EXTERNAL TURNING TOOLPSC / DWLN 外徑車刀

Accessory:Insert Clamp Shim Screw Screw Spring

WN..0804 C2RA W08BM SM6x10xA1 CM6x25C SPR4

MODEL NO. TYPE L l1 D d1 Insert

141.93.08R.050 PSC40 - DWLNR - 27050 - 08 74 50 40 27 WN..0804141.93.08L.050 PSC40 - DWLNL - 27050 - 08 74 50 40 27 WN..0804

2

Product information:▸ Inserts are optional accessories. Need to be purchased additionally.

Product information:▸ Inserts are optional accessories. Need to be purchased additionally.

l1

L

d1

D

PSC / DTJN EXTERNAL TURNING TOOLPSC / DTJN 外徑車刀

MODEL NO. TYPE L l1 D d1 Insert

140.92.16R.040 PSC32 - DTJNR - 22040 - 16 59 40 32 22 TN..1604140.92.16L.040 PSC32 - DTJNL - 22040 - 16 59 40 32 22 TN..1604141.92.16R.050 PSC40 - DTJNR - 27050 - 16 74 50 40 27 TN..1604141.92.16L.050 PSC40 - DTJNL - 27050 - 16 74 50 40 27 TN..1604

2

Accessory:Insert Clamp Shim Screw Screw Spring

TN..1604 C1RA T16BM SM5x8.65xA1 CM5X22C SPR6

General catalogueU-8

QH

L

PSC / DCLN EXTERNAL TURNING TOOL

MODEL NO. TYPE L l1 d1 Insert

140.90.12R.045 PSC32 - DCLNR - 22045 - 12 64 45 22 CN..1204140.90.12L.045 PSC32 - DCLNL - 22045 - 12 64 45 22 CN..1204141.90.12R.050 PSC40 - DCLNR - 27050 - 12 74 50 27 CN..1204141.90.12L.050 PSC40 - DCLNL - 27050 - 12 74 50 27 CN..1204

PSC / DCLN 外徑車刀

Accessory:Insert Clamp Shim Screw Screw Spring

CN..1204 C2RA C12BM SM6x10xA1 CM6x25C SPR4

2

Product information:▸ Inserts are optional accessories. Need to be purchased additionally.

Product information:▸ Inserts are optional accessories. Need to be purchased additionally.

l1L

80°D

PSC / MCMN EXTERNAL TURNING TOOL

MODEL NO. TYPE L l1 D Insert

140.480.12N.050 PSC32 - MCMNN - 00050 - 12 69 50 32 CN..1204141.480.12N.060 PSC40 - MCMNN - 00060 - 12 84 60 40 CN..1204

PSC / MCMN 外徑車刀

Accessory:Insert Clamp Shim Screw Screw

CN..1204 MC620 CMS432 MS620 MLP46L-A

2

General catalogue U-9

QH

LPSC / MDNN EXTERNAL TURNING TOOL

D

Ll1

55°

MODEL NO. TYPE L l1 D Insert

140.481.15N.050 PSC32 - MDNNN - 00050 - 15 69 50 32 DN..1504141.481.15N.060 PSC40 - MDNNN - 00060 - 15 84 60 40 DN..1504

PSC / MDNN 外徑車刀

Accessory:Insert Clamp Shim Screw Screw

DN..1504 MC622 DMS442 MS625 MLP46L-A

2

Product information:▸ Inserts are optional accessories. Need to be purchased additionally.

D 35°

l1L

PSC / MVVN EXTERNAL TURNING TOOL

MODEL NO. TYPE L l1 D Insert

140.484.16N.055 PSC32 - MVVNN - 00055 - 16 74 55 32 VN..1604141.484.16N.060 PSC40 - MVVNN - 00060 - 16 84 60 40 VN..1604

PSC / MVVN 外徑車刀2

Accessory:Insert Clamp Shim Screw Screw

VN..1604 MC622 VMS322 MS630 MLP34L-A

Product information:▸ Inserts are optional accessories. Need to be purchased additionally.

General catalogueU-10

QH

L

Product information:▸ Inserts are optional accessories. Need to be purchased additionally.

PSC / MVLN EXTERNAL TURNING TOOL

1l

1d

L d2

4°

MODEL NO. TYPE L l1 d1 d2 Insert

140.479.16R.050 PSC32 - MVLNR - 20050 - 16 69 50 20 18.1 VN..1604140.479.16L.050 PSC32 - MVLNL - 20050 - 16 69 50 20 18.1 VN..1604141.479.16R.055 PSC40 - MVLNR - 27055 - 16 79 55 27 22.5 VN..1604141.479.16L.055 PSC40 - MVLNL - 27055 - 16 79 55 27 22.5 VN..1604

PSC / MVLN 外徑車刀2

Accessory:Insert Clamp Shim Screw Screw

VN..1604 MC622 VMS322 MS630 MLP34L-A

General catalogue U-11

QH

L

d2

d1

l1

L

MODEL NO. TYPE L l1 d1 d2 SIZE RANGE WEIGHT(KGS)

140.122.16.040 PSC32 x ER16A - 40 59 40 28 - 1 ~ 10 0.17140.122.20.045 PSC32 x ER20A - 45 64 45 34 - 1 ~ 13 0.24140.122.25.050 PSC32 x ER25 - 50 69 50 42 - 1 ~ 16 0.32141.122.16.040 PSC40 x ER16A - 40 64 40 28 28 1 ~ 10 0.24141.122.20.045 PSC40 x ER20A - 45 69 45 34 34 1 ~ 13 0.30141.122.25.045 PSC40 x ER25 - 45 69 45 42 - 1 ~ 16 0.37141.122.32.054 PSC40 x ER32 - 54 78 54 50 - 2 ~ 20 0.48

PSC / ER COLLET CHUCKPSC / ER 立銑刀夾頭

OptionCollet Nut Screw Spanner

P.W-6~22 P.W-39 P.W-80 P.W-60~63

ＴＷ PAT NO. M298033ＴＷ PAT NO. M311791ＪＰ PAT NO. 3128766ＫＲ PAT NO. 20-0433603ＣＮ PAT NO. ZL200620132661.0ＣＨ PAT NO. 696550ＴＲ PAT NO. TR 2007 02942 YＩＴ PAT NO. N.0000266731

General catalogueU-12

QH

L

4.5˚

METRIC

MODEL NO. TYPE L l1 l2 l3 d1 d2 d3WEIGHT

(KGS)

140.651.06.050 PSC32 x SFC6 - 50 69 50 36 41 6 12 18 0.13140.651.08.050 PSC32 x SFC8 - 50 69 50 36 41 8 14 20 0.14140.651.09.050 PSC32 x SFC9 - 50 69 50 42 41 9 14 20 0.13140.651.10.050 PSC32 x SFC10 - 50 69 50 42 40.1 10 16 22.3 0.15140.651.11.060 PSC32 x SFC11 - 60 79 60 47 51 11 17 23 0.17140.651.12.060 PSC32 x SFC12 - 60 79 60 47 51 12 18 26 0.19141.651.06.050 PSC40 x SFC6 - 50 74 50 36 40 6 20 26 0.27141.651.08.050 PSC40 x SFC8 - 50 74 50 36 40 8 20 26 0.26141.651.09.050 PSC40 x SFC9 - 50 74 50 42 41 9 20 26.5 0.26141.651.10.050 PSC40 x SFC10 - 50 74 50 42 41 10 24 30 0.30141.651.11.060 PSC40 x SFC11 - 60 84 60 47 51 11 24 32 0.35141.651.12.060 PSC40 x SFC12 - 60 84 60 47 51 12 24 32 0.34141.651.13.060 PSC40 x SFC13 - 60 84 60 47 51 13 27 34 0.39141.651.14.060 PSC40 x SFC14 - 60 84 60 47 51 14 27 34 0.38141.651.16.060 PSC40 x SFC16 - 60 84 60 50 51 16 27 34 0.36141.651.18.060 PSC40 x SFC18 - 60 84 60 50 52 18 33 40 0.47141.651.20.065 PSC40 x SFC20 - 65 89 65 52 57 20 33 40 0.49

PSC / SFC SHRINK FIT CHUCKPSC / SFC 熱膨脹刀桿

ＴＷ PAT NO. M284478ＪＰ PAT NO. 3134091ＪＰ PAT NO. 3200356ＴＲ PAT NO. TR 200703317 YＤＥ PAT NO. Nr.202007006594.9ＵＳ PAT NO. US75564618.2

General catalogue U-13

QH

L

4.5˚

INCHES

MODEL NO. TYPE L l1 l2 l3 d1 d2 d3WEIGHT

(KGS)

140.651.54.200 PSC32 x SFC1/4" - 2" 2.748 2 1.417 1.646 0.25 0.709 0.945 0.18140.651.55.200 PSC32 x SFC5/16'' - 2'' 2.748 2 1.417 1.646 0.3125 0.79 1.047 0.20140.651.56.200 PSC32 x SFC3/8" - 2" 2.748 2 1.654 1.654 0.375 0.945 1.206 0.25140.651.58.236 PSC32 x SFC1/2" - 2.36" 3.11 2.36 1.85 2.047 0.5 1.102 1.339 0.34141.651.54.200 PSC40 x SFC1/4" - 2" 2.945 2 1.417 1.606 0.25 0.709 1.063 0.24141.651.55.200 PSC40 x SFC5/16" - 2" 2.945 2 1.417 1.606 0.3125 0.827 1.204 0.28141.651.56.200 PSC40 x SFC3/8" - 2" 2.945 2 1.653 1.646 0.375 0.945 1.195 0.31141.651.58.250 PSC40 x SFC1/2" - 2.5" 3.445 2.5 1.85 2.146 0.5 1.102 1.339 0.43141.651.61.250 PSC40 x SFC5/8" - 2.5" 3.445 2.5 1.969 2.146 0.625 1.063 1.339 0.39141.651.64.250 PSC40 x SFC3/4" - 2.5" 3.445 2.5 2.047 2.185 0.75 1.417 1.654 0.55

PSC / SFC SHRINK FIT CHUCKPSC / SFC 熱膨脹刀桿

ＴＷ PAT NO. M284478ＪＰ PAT NO. 3134091ＪＰ PAT NO. 3200356ＴＲ PAT NO. TR 200703317 YＤＥ PAT NO. Nr.202007006594.9ＵＳ PAT NO. US75564618.2

General catalogueU-14

QH

L

METRIC

MODEL NO. TYPE L l1 l2 l3 d1 d2 d3WEIGHT

(KGS)

140.651.06.050B PSC32 x SFC6 - 50 - CP 69 50 36 41 6 21 27 0.21140.651.08.050B PSC32 x SFC8 - 50 - CP 69 50 36 41 8 21 27 0.20140.651.09.050B PSC32 x SFC9 - 50 - CP 69 50 42 41 9 24 30.5 0.24140.651.10.050B PSC32 x SFC10 - 50 - CP 69 50 42 41 10 24 30.5 0.23140.651.11.060B PSC32 x SFC11 - 60 - CP 79 60 47 52 11 24 32 0.30140.651.12.060B PSC32 x SFC12 - 60 - CP 79 60 47 52 12 24 32 0.27141.651.06.050B PSC40 x SFC6 - 50 - CP 74 50 36 40 6 21 27 0.27141.651.08.050B PSC40 x SFC8 - 50 - CP 74 50 36 40 8 21 27 0.26141.651.09.050B PSC40 x SFC9 - 50 - CP 74 50 42 41 9 21 30 0.30141.651.10.050B PSC40 x SFC10 - 50 - CP 74 50 42 41 10 24 30 0.29141.651.11.060B PSC40 x SFC11 - 60 - CP 84 60 47 51 11 24 32 0.34141.651.12.060B PSC40 x SFC12 - 60 - CP 84 60 47 51 12 24 32 0.33141.651.13.060B PSC40 x SFC13 - 60 - CP 84 60 47 51 13 27 34 0.38141.651.14.060B PSC40 x SFC14 - 60 - CP 84 60 47 51 14 27 34 0.37141.651.16.060B PSC40 x SFC16 - 60 - CP 84 60 50 51 16 27 34 0.35141.651.18.060B PSC40 x SFC18 - 60 - CP 84 60 50 52 18 33 40 0.46141.651.20.065B PSC40 x SFC20 - 65 - CP 89 65 52 57 20 33 40 0.48

PSC / SFC SHRINK FIT CHUCKwith CP coolant hole type

PSC / SFC 熱膨脹刀桿 [ 出水孔型 ]

Features:▸ Coolant hole design (CP) on the front nose of PSCxSFC Shrink Fit Chuck could centralize coolant, improve the metal chips removal capability, cool down the workpiece, and improve the surface precision of workpiece. ▸ Useful for cutting tools without coolant holes.

4.5˚ Coolanthole

ＴＷ PAT NO. M284478ＪＰ PAT NO. 3134091ＪＰ PAT NO. 3200356ＴＲ PAT NO. TR 200703317 YＤＥ PAT NO. Nr.202007006594.9ＵＳ PAT NO. US75564618.2

General catalogue U-15

QH

L

INCHES

MODEL NO. TYPE L l1 l2 l3 d1 d2 d3WEIGHT

(KGS)

140.651.54.200B PSC32 x SFC1/4"- 2" - CP 2.748 2 1.417 1.646 0.25 0.826 1.063 0.21140.651.55.200B PSC32 x SFC5/16'' - 2'' - CP 2.748 2 1.417 1.646 0.3125 0.79 1.047 0.19140.651.56.200B PSC32 x SFC3/8" - 2" - CP 2.748 2 1.654 1.654 0.375 0.945 1.206 0.24140.651.58.236B PSC32 x SFC1/2" - 2.36" - CP 3.11 2.36 1.85 2.047 0.5 1.102 1.339 0.33141.651.54.200B PSC40 x SFC1/4" - 2" - CP 2.945 2 1.417 1.606 0.25 0.826 1.063 0.27141.651.55.200B PSC40 x SFC5/16" - 2" - CP 2.945 2 1.417 1.606 0.3125 0.827 1.063 0.27141.651.56.200B PSC40 x SFC3/8" - 2" - CP 2.945 2 1.653 1.646 0.375 0.945 1.204 0.31141.651.58.250B PSC40 x SFC1/2" - 2.5" - CP 3.445 2.5 1.85 2.146 0.5 1.102 1.339 0.42141.651.61.250B PSC40 x SFC5/8" - 2.5" - CP 3.445 2.5 1.969 2.146 0.625 1.063 1.339 0.37141.651.64.250B PSC40 x SFC3/4" - 2.5" - CP 3.445 2.5 2.047 2.185 0.75 1.417 1.654 0.54

PSC / SFC SHRINK FIT CHUCKwith CP coolant hole type

PSC / SFC 熱膨脹刀桿 [ 出水孔型 ]

Features:▸ Coolant hole design (CP) on the front nose of PSCxSFC Shrink Fit Chuck could centralize coolant, improve the metal chips removal capability, cool down the workpiece, and improve the surface precision of workpiece. ▸ Useful for cutting tools without coolant holes.

4.5˚ Coolanthole

ＴＷ PAT NO. M284478ＪＰ PAT NO. 3134091ＪＰ PAT NO. 3200356ＴＲ PAT NO. TR 200703317 YＤＥ PAT NO. Nr.202007006594.9ＵＳ PAT NO. US75564618.2

General catalogueU-16

QH

L

PSC / SLN SIDE LOCK END MILL HOLDER

l5

l6

l1

l2l3

d1

d2

l4 T

L

PSC / SLN 側固式立銑刀柄

METRIC

MODEL NO. TYPE L l1 l2 l3 l4 l5 l6 d1 d2 T WEIGHT(KGS)

140.653.06.045 PSC32 x SLN6 - 45 64 45 10 10 - 36 36 6 25 M6 0.21140.653.08.045 PSC32 x SLN8 - 45 64 45 10 10 10 35 36.5 8 28 M6 0.24140.653.10.050 PSC32 x SLN10 - 50 69 50 8 12 12 39 42 10 32 M6 0.31140.653.12.055 PSC32 x SLN12 - 55 74 55 15 15 - 44 47 12 32 M8 0.32140.653.14.055 PSC32 x SLN14 - 55 74 55 15 15 - 44 47 14 32 M8 0.31140.653.16.060 PSC32 x SLN16 - 60 79 60 8 12 12 47 52 16 32 M8 0.31140.653.18.060 PSC32 x SLN18 - 60 79 60 8 12 12 47 52 18 32 M8 0.29140.653.20.060 PSC32 x SLN20 - 60 79 60 8 12 12 50 52 20 32 M8 0.27141.653.06.045 PSC40 x SLN6 - 45 69 45 10 10 - 35 32 6 25 M6 0.28141.653.08.045 PSC40 x SLN8 - 45 69 45 10 10 10 35 33 8 28 M6 0.31141.653.10.050 PSC40 x SLN10 - 50 74 50 8 12 12 39 39.5 10 35 M6 0.43141.653.12.055 PSC40 x SLN12 - 55 79 55 15 15 - 44 47 12 40 M8 0.55141.653.14.055 PSC40 x SLN14 - 55 79 55 15 15 - 44 47 14 40 M8 0.54141.653.16.055 PSC40 x SLN16 - 55 79 55 8 12 12 47 47 16 40 M8 0.51141.653.18.060 PSC40 x SLN18 - 60 84 60 8 12 12 47 52 18 40 M8 0.54141.653.20.060 PSC40 x SLN20 - 60 84 60 8 12 12 50 52 20 40 M8 0.51141.653.25.065 PSC40 x SLN25 - 65 89 65 8 12 12 51 57 25 40 M8 0.47141.653.32.075 PSC40 x SLN32 - 75 99 75 12 18 18 61 64 32 50 M8 0.73

INCHES

MODEL NO. TYPE L l1 l2 l3 l4 l5 l6 d1 d2 T WEIGHT(KGS)

140.653.54.177 PSC32 x SLN1/4" - 1.77" 2.519 1.77 0.394 0.394 - 1.38 1.417 0.25 0.78 1/4''-28 0.16140.653.55.177 PSC32 x SLN5/16" - 1.77" 2.519 1.77 0.394 0.394 - 1.38 1.378 0.3125 0.88 1/4''-28 0.18140.653.56.197 PSC32 x SLN3/8" - 1.97" 2.717 1.97 0.315 0.472 0.472 1.535 1.575 0.375 1.00 1/4''-28 0.22140.653.58.217 PSC32 x SLN1/2" - 2.17" 2.913 2.17 0.591 0.591 - 1.732 1.85 0.5 1.25 5/16''-24 0.32141.653.54.177 PSC40 x SLN1/4" - 1.77" 2.72 1.77 0.394 0.394 - 1.38 1.26 0.25 0.78 1/4''-28 0.23141.653.55.177 PSC40 x SLN5/16" - 1.77" 2.72 1.77 0.394 0.394 - 1.38 1.339 0.3125 0.88 1/4''-28 0.24141.653.56.197 PSC40 x SLN3/8" - 1.97" 2.91 1.97 0.315 0.472 0.472 1.535 1.535 0.375 1.00 1/4''-28 0.29141.653.58.217 PSC40 x SLN1/2" - 2.17" 3.11 2.17 0.591 0.591 - 1.732 1.811 0.5 1.25 5/16''-24 0.38141.653.59.217 PSC40 x SLN9/16" - 2.17" 3.11 2.17 0.591 0.591 - 1.85 1.831 0.5625 1.437 5/16''-24 0.46141.653.61.217 PSC40 x SLN5/8" - 2.17" 3.11 2.17 0.315 0.472 0.472 1.73 1.813 0.625 1.5 5/16''-24 0.48

General catalogue U-17

QH

L

METRIC

MODEL NO. TYPE L l1 l2 l3 l4 l5 l6 d1 d2 T WEIGHT(KGS)

140.653.06.045B PSC32 x SLN6 - 45 FID 64 45 10 10 - 36 36 6 25 M6 0.21140.653.08.045B PSC32 x SLN8 - 45 FID 64 45 10 10 10 35 36.5 8 28 M6 0.24140.653.10.050B PSC32 x SLN10 - 50 FID 69 50 8 12 12 39 42 10 32 M6 0.31140.653.12.055B PSC32 x SLN12 - 55 FID 74 55 15 15 - 44 47 12 32 M8 0.32140.653.14.055B PSC32 x SLN14 - 55 FID 74 55 15 15 - 44 47 14 32 M8 0.31140.653.16.060B PSC32 x SLN16 - 60 FID 79 60 8 12 12 47 52 16 32 M8 0.31140.653.18.060B PSC32 x SLN18 - 60 FID 79 60 8 12 12 47 52 18 32 M8 0.29140.653.20.060B PSC32 x SLN20 - 60 FID 79 60 8 12 12 50 52 20 32 M8 0.27141.653.06.045B PSC40 x SLN6 - 45 FID 69 45 10 10 - 35 32 6 25 M6 0.28141.653.08.045B PSC40 x SLN8 - 45 FID 69 45 10 10 10 35 33 8 28 M6 0.31141.653.10.050B PSC40 x SLN10 - 50 FID 74 50 8 12 12 39 39.5 10 35 M6 0.43141.653.12.055B PSC40 x SLN12 - 55 FID 79 55 15 15 - 44 47 12 40 M8 0.55141.653.14.055B PSC40 x SLN14 - 55 FID 79 55 15 15 - 44 47 14 40 M8 0.54141.653.16.055B PSC40 x SLN16 - 55 FID 79 55 8 12 12 47 47 16 40 M8 0.51141.653.18.060B PSC40 x SLN18 - 60 FID 84 60 8 12 12 47 52 18 40 M8 0.54141.653.20.060B PSC40 x SLN20 - 60 FID 84 60 8 12 12 50 52 20 40 M8 0.51141.653.25.065B PSC40 x SLN25 - 65 FID 89 65 8 12 12 51 57 25 40 M8 0.47141.653.32.075B PSC40 x SLN32 - 75 FID 99 75 12 18 18 61 64 32 50 M8 0.73

INCHES

MODEL NO. TYPE L l1 l2 l3 l4 l5 l6 d1 d2 T WEIGHT(KGS)

140.653.54.177B PSC32 x SLN1/4" - 1.77" FID 2.519 1.77 0.394 0.394 - 1.38 1.417 0.25 0.78 1/4''-28 0.16140.653.55.177B PSC32 x SLN5/16" - 1.77" FID 2.519 1.77 0.394 0.394 - 1.38 1.378 0.3125 0.88 1/4''-28 0.18140.653.56.197B PSC32 x SLN3/8" - 1.97" FID 2.717 1.97 0.315 0.472 0.472 1.535 1.575 0.375 1.00 1/4''-28 0.22140.653.58.217B PSC32 x SLN1/2" - 2.17" FID 2.913 2.17 0.591 0.591 - 1.732 1.85 0.5 1.25 5/16''-24 0.32141.653.54.177B PSC40 x SLN1/4" - 1.77" FID 2.72 1.77 0.394 0.394 - 1.38 1.26 0.25 0.78 1/4''-28 0.23141.653.55.177B PSC40 x SLN5/16" - 1.77" FID 2.72 1.77 0.394 0.394 - 1.38 1.339 0.3125 0.88 1/4''-28 0.24141.653.56.197B PSC40 x SLN3/8" - 1.97" FID 2.91 1.97 0.315 0.472 0.472 1.535 1.535 0.375 1.00 1/4''-28 0.29141.653.58.217B PSC40 x SLN1/2" - 2.17" FID 3.11 2.17 0.591 0.591 - 1.732 1.811 0.5 1.25 5/16''-24 0.38141.653.59.217B PSC40 x SLN9/16" - 2.17" FID 3.11 2.17 0.591 0.591 - 1.85 1.831 0.5625 1.437 5/16''-24 0.46141.653.61.217B PSC40 x SLN5/8" - 2.17" FID 3.11 2.17 0.315 0.472 0.472 1.73 1.813 0.625 1.5 5/16''-24 0.48

PSC / SLN 側固式立銑刀柄 [ 出水槽型 ]

l5

l6

l1

l2l3

d1

d2

l4 T

L

PSC / SLN SIDE LOCK END MILL HOLDERwith CP coolant hole type

Features:▸ Coolant hole design (CP) on the front nose of PSCxSFC Shrink Fit Chuck could centralize coolant, improve the metal chips removal capability, cool down the workpiece, and improve the surface precision of workpiece. ▸ Useful for cutting tools without coolant holes.

Coolanthole

General catalogueU-18

QH

L

MODEL NO. TYPE L l1 l2 l3 d1 INSERT WEIGHT(KGS)

141.685.15.045 PSC40 x SPD15 - 3D - 45 82 70 50 45 15 SP..0502 0.30141.685.16.048 PSC40 x SPD16 - 3D - 48 86 74 53 48 16 SP..0602 0.40141.685.17.051 PSC40 x SPD17 - 3D - 51 89 77 56 51 17 SP..0602 0.42141.685.18.054 PSC40 x SPD18 - 3D - 54 93 81 59 54 18 SP..0602 0.44141.685.19.057 PSC40 x SPD19 - 3D - 57 96 84 62 57 19 SP..0602 0.45141.685.20.060 PSC40 x SPD20 - 3D - 60 101 89 65 60 20 SP..0602 0.47141.685.21.063 PSC40 x SPD21 - 3D - 63 104 92 68 63 21 SP..0602 0.48141.685.22.066 PSC40 x SPD22 - 3D - 66 107 95 71 66 22 SP..07T3 0.49141.685.23.069 PSC40 x SPD23 - 3D - 69 111 99 74 69 23 SP..07T3 0.66141.685.24.072 PSC40 x SPD24 - 3D - 72 115 103 77 72 24 SP..07T3 0.67141.685.25.075 PSC40 x SPD25 - 3D - 75 119 107 80 75 25 SP..07T3 0.72141.685.26.078 PSC40 x SPD26 - 3D - 78 122 110 83 78 26 SP..07T3 0.73141.685.27.081 PSC40 x SPD27 - 3D - 81 125 113 86 81 27 SP..07T3 0.75141.685.28.084 PSC40 x SPD28 - 3D - 84 129 117 89 84 28 SP..0904 0.78141.685.29.087 PSC40 x SPD29 - 3D - 87 132 120 92 87 29 SP..0904 0.81141.685.30.090 PSC40 x SPD30 - 3D - 90 135 123 95 90 30 SP..0904 0.83

ACCESSORIESInsert Screw Wrench

SP..0502 M2-4.3-2.7-60 T6SP..0602 M2.2-5.2-3.1-60 T7SP..07T3 M2.5-6.33-3.5-48 T8SP..0904 M3.5-8.4-5.0-60 T10

INCHES

MODEL NO. TYPE L l1 l2 l3 d1 INSERT WEIGHT(KGS)

141.685.15.5.047 PSC40 x SPD15.5 - 3D - 47 96 84 52 47 15.5 SP..0602 0.28141.685.16.5.050 PSC40 x SPD16.5 - 3D - 50 100 88 55 50 16.5 SP..0602 0.31141.685.17.5.053 PSC40 x SPD17.5 - 3D - 53 104 92 58 53 17.5 SP..0602 0.42141.685.18.5.056 PSC40 x SPD18.5 - 3D - 56 107 95 61 56 18.5 SP..0602 0.43141.685.20.62.062 PSC40 x SPD20.62 - 3D - 62 115 103 67 62 20.62 SP..0602 0.43141.685.22.23.067 PSC40 x SPD22.23 - 3D - 67 120 108 72 67 22.23 SP..07T3 0.45141.685.25.4.077 PSC40 x SPD25.4 - 3D - 77 133 121 82 77 25.4 SP..07T3 0.48141.685.28.59.086 PSC40 x SPD28.59 - 3D - 86 143 131 91 86 28.59 SP..0904 0.50

L

l1

l2

l3

d1

PSC / SPD HIGH SPEED DRILLONE-PIECE TYPE

PSC / SPD 一體式快速鑽頭

Features:▸ Drilling depth is three times longer than the diameter of the High Speed Drill. ▸ The material is anti-vibration tool steel.▸ The whole body is treated with fine grinding after hardening in order to raise the rigidity and stability and prevent from deformation.▸ There is special coating on the surface of the high speed drill, which decreases the wear rate and extends the use life of the drill.Product information:▸ Inserts are optional accessories. Need to be purchased additionally.

3D

General catalogue U-19

QH

L

ACCESSORIESInsert Screw Wrench

SP..0502 M2-4.3-2.7-60 T6SP..0602 M2.2-5.2-3.1-60 T7SP..07T3 M2.5-6.33-3.5-48 T8SP..0904 M3.5-8.4-5.0-60 T10

L

l1

l2

l3

d1

MODEL NO. TYPE L l1 l2 l3 d1 INSERT WEIGHT(KGS)

141.685.17.068 PSC40 x SPD17 - 4D - 68 118 106 73 68 17 SP..0602 0.45141.685.18.072 PSC40 x SPD18 - 4D - 72 123 111 77 72 18 SP..0602 0.47141.685.19.076 PSC40 x SPD19 - 4D - 76 127 115 81 76 19 SP..0602 0.48141.685.20.080 PSC40 x SPD20 - 4D - 80 133 121 85 80 20 SP..0602 0.50141.685.21.084 PSC40 x SPD21 - 4D - 84 137 125 89 84 21 SP..0602 0.51141.685.22.088 PSC40 x SPD22 - 4D - 88 141 129 93 88 22 SP..07T3 0.74141.685.23.092 PSC40 x SPD23 - 4D - 92 146 134 97 92 23 SP..07T3 0.56141.685.24.096 PSC40 x SPD24 - 4D - 96 151 139 101 96 24 SP..07T3 0.58141.685.25.100 PSC40 x SPD25 - 4D - 100 156 144 105 100 25 SP..07T3 0.61141.685.26.104 PSC40 x SPD26 - 4D - 104 160 148 109 104 26 SP..07T3 0.65141.685.27.108 PSC40 x SPD27 - 4D - 108 164 152 113 108 27 SP..07T3 0.69141.685.28.112 PSC40 x SPD28 - 4D - 112 169 157 117 112 28 SP..0904 0.73141.685.29.116 PSC40 x SPD29 - 4D - 116 173 161 121 116 29 SP..0904 0.75141.685.30.120 PSC40 x SPD30 - 4D - 120 177 165 125 120 30 SP..0904 0.81

INCHES

MODEL NO. TYPE L l1 l2 l3 d1 INSERT WEIGHT(KGS)

141.685.17.5.070 PSC40 x SPD17.5 - 4D - 70 121 109 75 70 17.5 SP..0602 0.47141.685.18.5.074 PSC40 x SPD18.5 - 4D - 74 125 113 79 74 18.5 SP..0602 0.49141.685.20.62.083 PSC40 x SPD20.62 - 4D - 83 136 124 88 83 20.62 SP..0602 0.52141.685.22.23.089 PSC40 x SPD22.23 - 4D - 89 142 130 94 89 22.23 SP..07T3 0.76141.685.25.4.102 PSC40 x SPD25.4 - 4D - 102 158 146 107 102 25.4 SP..07T3 0.63141.685.28.59.115 PSC40 x SPD28.59 - 4D - 115 172 160 120 115 28.59 SP..0904 0.75

PSC / SPD HIGH SPEED DRILLONE-PIECE TYPE

PSC / SPD 一體式快速鑽頭

Features:▸ Drilling depth is four times longer than the diameter of the High Speed Drill. ▸ The material is anti-vibration tool steel.▸ The whole body is treated with fine grinding after hardening in order to raise the rigidity and stability and prevent from deformation.▸ There is special coating on the surface of the high speed drill, which decreases the wear rate and extends the use life of the drill.Product information:▸ Inserts are optional accessories. Need to be purchased additionally.

4D

General catalogueU-20

QH

L

MODEL NO. TYPE L l1 l2 l3 D d1 INSERT WEIGHT(KGS)

156.685.1325.039 SPD13 - C25 - 3D - 39L 119 63 44 39 25 13 SP..0502 0.30156.685.1425.042 SPD14 - C25 - 3D - 42L 122 66 47 42 25 14 SP..0502 0.19156.685.1525.045 SPD15 - C25 - 3D - 45L 125 69 50 45 25 15 SP..0502 0.22156.685.1625.048 SPD16 - C25 - 3D - 48L 130 74 53 48 25 16 SP..0602 0.32156.685.1725.051 SPD17 - C25 - 3D - 51L 133 77 56 51 25 17 SP..0602 0.33156.685.1825.054 SPD18 - C25 - 3D - 54L 136 80 59 54 25 18 SP..0602 0.35156.685.1925.057 SPD19 - C25 - 3D - 57L 139 83 62 57 25 19 SP..0602 0.36156.685.2025.060 SPD20 - C25 - 3D - 60L 142 86 65 60 25 20 SP..0602 0.38156.685.2125.063 SPD21 - C25 - 3D - 63L 145 89 68 63 25 21 SP..0602 0.39156.685.2225.066 SPD22 - C25 - 3D - 66L 148 92 71 66 25 22 SP..07T3 0.40156.685.2332.069 SPD23 - C32 - 3D - 69L 157 97 74 69 32 23 SP..07T3 0.66156.685.2432.072 SPD24 - C32 - 3D - 72L 160 100 77 72 32 24 SP..07T3 0.67156.685.2532.075 SPD25 - C32 - 3D - 75L 163 103 80 75 32 25 SP..07T3 0.72156.685.2632.078 SPD26 - C32 - 3D - 78L 166 106 83 78 32 26 SP..07T3 0.73156.685.2732.081 SPD27 - C32 - 3D - 81L 169 109 86 81 32 27 SP..07T3 0.75156.685.2832.084 SPD28 - C32 - 3D - 84L 174 114 89 84 32 28 SP..0904 0.78156.685.2932.087 SPD29 - C32 - 3D - 87L 177 117 92 87 32 29 SP..0904 0.81156.685.3032.090 SPD30 - C32 - 3D - 90L 180 120 95 90 32 30 SP..0904 0.83156.685.3132.093 SPD31 - C32 - 3D - 93L 183 123 98 93 32 31 SP..0904 0.88156.685.3232.096 SPD32 - C32 - 3D - 96L 186 126 101 96 32 32 SP..0904 0.90156.685.3332.099 SPD33 - C32 - 3D - 99L 189 129 104 99 32 33 SP..0904 0.93

L

l1

l2

l3

d1D

INDEXABLE HIGH SPEED DRILLSPD 捨棄式快速鑽頭

ACCESSORIESINSERT SCREW WRENCH

SP..0502 M2-4.3-2.7-60 T6SP..0602 M2.2-5.2-3.1-60 T7SP..07T3 M2.5-6.33-3.5-48 T8SP..0904 M3.5-8.4-5.0-60 T10

Features:▸ Drilling depth is three times longer than the diameter of the High Speed Drill. ▸ The material is anti-vibration tool steel.▸ The whole body is treated with fine grinding after hardening in order to raise the rigidity and stability and prevent from deformation.▸ There is special coating on the surface of the high speed drill, which decreases the wear rate and extends the use life of the drill.Product information:▸ Inserts are optional accessories. Need to be purchased additionally.

3D

General catalogue U-21

QH

L

MODEL NO. TYPE L l1 l2 l3 D d1 INSERT WEIGHT(KGS)

156.685.3432.102 SPD34 - C32 - 3D - 102L 192 132 107 102 32 34 SP..1104 0.98156.685.3532.105 SPD35 - C32 - 3D - 105L 195 135 110 105 32 35 SP..1104 0.99156.685.3632.108 SPD36 - C32 - 3D - 108L 198 138 113 108 32 36 SP..1104 1.09156.685.3732.111 SPD37 - C32 - 3D - 111L 201 141 116 111 32 37 SP..1104 1.08156.685.3832.114 SPD38 - C32 - 3D - 114L 204 144 119 114 32 38 SP..1104 1.12156.685.3932.117 SPD39 - C32 - 3D - 117L 207 147 122 117 32 39 SP..1104 1.22156.685.4040.120 SPD40 - C40 - 3D - 120L 224 154 125 120 40 40 SP..1104 1.74156.685.4140.123 SPD41 - C40 - 3D - 123L 227 157 128 123 40 41 SP..1104 1.79156.685.4240.126 SPD42 - C40 - 3D - 126L 230 160 131 126 40 42 SP..1405 1.89156.685.4340.129 SPD43 - C40 - 3D - 129L 233 163 134 129 40 43 SP..1405 1.99156.685.4440.132 SPD44 - C40 - 3D - 132L 236 166 137 132 40 44 SP..1405 2.10156.685.4540.135 SPD45 - C40 - 3D - 135L 239 169 140 135 40 45 SP..1405 2.21156.685.4640.138 SPD46 - C40 - 3D - 138L 242 172 143 138 40 46 SP..1405 2.33156.685.4740.141 SPD47 - C40 - 3D - 141L 245 175 146 141 40 47 SP..1405 2.45156.685.4840.144 SPD48 - C40 - 3D - 144L 248 178 149 144 40 48 SP..1405 2.58156.685.4940.147 SPD49 - C40 - 3D - 147L 251 181 152 147 40 49 SP..1405 2.71156.685.5040.150 SPD50 - C40 - 3D - 150L 254 184 155 150 40 50 SP..1405 2.85

L

l1

l2

l3

d1D

INDEXABLE HIGH SPEED DRILLSPD 捨棄式快速鑽頭

ACCESSORIESINSERT SCREW WRENCH

SP..1104 M4-9.35-5.65-60 T15SP..1405 M5-12.8-7.0-60 T20

Features:▸ Drilling depth is three times longer than the diameter of the High Speed Drill. ▸ The material is anti-vibration tool steel.▸ The whole body is treated with fine grinding after hardening in order to raise the rigidity and stability and prevent from deformation.▸ There is special coating on the surface of the high speed drill, which decreases the wear rate and extends the use life of the drill.Product information:▸ Inserts are optional accessories. Need to be purchased additionally.

3D

General catalogueU-22

QH

L

INCHES

MODEL NO. TYPE L l1 l2 l3 D d1 INSERT WEIGHT(KGS)

156.685.13525.40.5 SPD13.5 - C25 - 3D - 40.5L 120.5 64.5 45.5 40.5 25 13.5 SP..0502 0.28156.685.14525.43.5 SPD14.5 - C25 - 3D - 43.5L 123.5 67.5 48.5 43.5 25 14.5 SP..0502 0.31156.685.15525.46.5 SPD15.5 - C25 - 3D - 46.5L 128.5 72.5 51.5 46.5 25 15.5 SP..0602 0.32156.685.16525.49.5 SPD16.5 - C25 - 3D - 49.5L 131.5 75.5 54.5 49.5 25 16.5 SP..0602 0.33156.685.17525.52.5 SPD17.5 - C25 - 3D - 52.5L 134.5 78.5 57.5 52.5 25 17.5 SP..0602 0.33156.685.18525.55.5 SPD18.5 - C25 - 3D - 55.5L 137.5 81.5 60.5 55.5 25 18.5 SP..0602 0.35156.685.19525.58.5 SPD19.5 - C25 - 3D - 58.5L 140.5 84.5 63.5 58.5 25 19.5 SP..0602 0.38156.685.20525.61.5 SPD20.5 - C25 - 3D - 61.5L 143.5 87.5 66.5 61.5 25 20.5 SP..0602 0.38156.685.21525.64.5 SPD21.5 - C25 - 3D - 64.5L 146.5 90.5 69.5 64.5 25 21.5 SP..0602 0.40156.685.22532.67.5 SPD22.5 - C32 - 3D - 67.5L 155.5 95.5 72.5 67.5 32 22.5 SP..07T3 0.65156.685.23532.70.5 SPD23.5 - C32 - 3D - 70.5L 158.5 98.5 75.5 70.5 32 23.5 SP..07T3 0.66156.685.24532.73.5 SPD24.5 - C32 - 3D - 73.5L 161.5 101.5 78.5 73.5 32 24.5 SP..07T3 0.71156.685.25532.76.5 SPD25.5 - C32 - 3D - 76.5L 164.5 104.5 81.5 76.5 32 25.5 SP..07T3 0.72156.685.26532.79.5 SPD26.5 - C32 - 3D - 79.5L 167.5 107.5 84.5 79.5 32 26.5 SP..07T3 0.75156.685.27532.82.5 SPD27.5 - C32 - 3D - 82.5L 170.5 110.5 87.5 82.5 32 27.5 SP..07T3 0.76156.685.28532.85.5 SPD28.5 - C32 - 3D - 85.5L 175.5 115.5 90.5 85.5 32 28.5 SP..0904 0.80156.685.29532.88.5 SPD29.5 - C32 - 3D - 88.5L 178.5 118.5 93.5 88.5 32 29.5 SP..0904 0.82156.685.30532.91.5 SPD30.5 - C32 - 3D - 91.5L 181.5 121.5 96.5 91.5 32 30.5 SP..0904 0.87156.685.31532.94.5 SPD31.5 - C32 - 3D - 94.5L 184.5 124.5 99.5 94.5 32 31.5 SP..0904 0.89156.685.32532.97.5 SPD32.5 - C32 - 3D - 97.5L 187.5 127.5 102.5 97.5 32 32.5 SP..0904 0.92156.685.33532.100.5 SPD33.5 - C32 - 3D - 100.5L 190.5 130.5 105.5 100.5 32 33.5 SP..0904 0.98

L

l1

l2

l3

d1D

INDEXABLE HIGH SPEED DRILLSPD 捨棄式快速鑽頭

ACCESSORIESInsert Screw Wrench

SP..0502 M2-4.3-2.7-60 T6SP..0602 M2.2-5.2-3.1-60 T7SP..07T3 M2.5-6.33-3.5-48 T8SP..0904 M3.5-8.4-5.0-60 T10

Features:▸ Drilling depth is three times longer than the diameter of the High Speed Drill. ▸ The material is anti-vibration tool steel.▸ The whole body is treated with fine grinding after hardening in order to raise the rigidity and stability and prevent from deformation.▸ There is special coating on the surface of the high speed drill, which decreases the wear rate and extends the use life of the drill.Product information:▸ Inserts are optional accessories. Need to be purchased additionally.

3D

General catalogue U-23

QH

L

MODEL NO. TYPE L l1 l2 l3 D d1 INSERT WEIGHT(KGS)

156.685.1325.052 SPD13 - C25 - 4D - 52L 132 76 57 52 25 13 SP..0502 0.34

156.685.1425.056 SPD14 - C25 - 4D - 56L 136 80 61 56 25 14 SP..0502 0.34

156.685.1525.060 SPD15 - C25 - 4D - 60L 140 84 65 60 25 15 SP..0502 0.36

156.685.1625.064 SPD16 - C25 - 4D - 64L 146 90 69 64 25 16 SP..0602 0.37

156.685.1725.068 SPD17 - C25 - 4D - 68L 150 94 73 68 25 17 SP..0602 0.38

156.685.1825.072 SPD18 - C25 - 4D - 72L 154 98 77 72 25 18 SP..0602 0.40

156.685.1925.076 SPD19 - C25 - 4D - 76L 158 102 81 76 25 19 SP..0602 0.41

156.685.2025.080 SPD20 - C25 - 4D - 80L 162 106 85 80 25 20 SP..0602 0.43

156.685.2125.084 SPD21 - C25 - 4D - 84L 166 110 89 84 25 21 SP..0602 0.45

156.685.2232.088 SPD22 - C32 - 4D - 88L 176 116 93 88 32 22 SP..07T3 0.67

156.685.2332.092 SPD23 - C32 - 4D - 92L 180 120 97 92 32 23 SP..07T3 0.69

156.685.2432.096 SPD24 - C32 - 4D - 96L 184 124 101 96 32 24 SP..07T3 0.71

156.685.2532.100 SPD25 - C32 - 4D - 100L 188 128 105 100 32 25 SP..07T3 0.74

156.685.2632.104 SPD26 - C32 - 4D - 104L 192 132 109 104 32 26 SP..07T3 0.77

156.685.2732.108 SPD27 - C32 - 4D - 108L 196 136 113 108 32 27 SP..07T3 0.81

156.685.2832.112 SPD28 - C32 - 4D - 112L 202 142 117 112 32 28 SP..0904 0.86

156.685.2932.116 SPD29 - C32 - 4D - 116L 206 146 121 116 32 29 SP..0904 0.88

156.685.3032.120 SPD30 - C32 - 4D - 120L 210 150 125 120 32 30 SP..0904 0.94

156.685.3132.124 SPD31 - C32 - 4D - 124L 214 154 129 124 32 31 SP..0904 0.96

156.685.3232.128 SPD32 - C32 - 4D - 128L 218 158 133 128 32 32 SP..0904 1.01

156.685.3332.132 SPD33 - C32 - 4D - 132L 222 162 137 132 32 33 SP..0904 1.06

L

l1

l2

l3

d1D

INDEXABLE HIGH SPEED DRILLSPD 捨棄式快速鑽頭

ACCESSORIESInsert Screw Wrench

SP..0502 M2-4.3-2.7-60 T6SP..0602 M2.2-5.2-3.1-60 T7SP..07T3 M2.5-6.33-3.5-48 T8SP..0904 M3.5-8.4-5.0-60 T10

Features:▸ Drilling depth is four times longer than the diameter of the High Speed Drill. ▸ The material is anti-vibration tool steel.▸ The whole body is treated with fine grinding after hardening in order to raise the rigidity and stability and prevent from deformation.▸ There is special coating on the surface of the high speed drill, which decreases the wear rate and extends the use life of the drill.Product information:▸ Inserts are optional accessories. Need to be purchased additionally.

4D

General catalogueU-24

QH

L

MODEL NO. TYPE L l1 l2 l3 D d1 INSERT WEIGHT(KGS)

156.685.3432.136 SPD34 - C32 - 4D - 136L 226 166 141 136 32 34 SP..1104 1.07

156.685.3532.140 SPD35 - C32 - 4D - 140L 230 170 145 140 32 35 SP..1104 1.12

156.685.3632.144 SPD36 - C32 - 4D - 144L 234 174 149 144 32 36 SP..1104 1.15

156.685.3732.148 SPD37 - C32 - 4D - 148L 238 178 153 148 32 37 SP..1104 1.21

156.685.3832.152 SPD38 - C32 - 4D - 152L 242 182 157 152 32 38 SP..1104 1.24

156.685.3932.156 SPD39 - C32 - 4D - 156L 246 186 161 156 32 39 SP..1104 1.33

156.685.4040.160 SPD40 - C40 - 4D - 160L 264 194 165 160 40 40 SP..1104 1.80

156.685.4140.164 SPD41 - C40 - 4D - 164L 268 198 169 164 40 41 SP..1104 1.81

156.685.4240.168 SPD42 - C40 - 4D - 168L 272 202 173 168 40 42 SP..1405 1.93156.685.4340.172 SPD43 - C40 - 4D - 172L 276 206 177 172 40 43 SP..1405 2.07156.685.4440.176 SPD44 - C40 - 4D - 176L 280 210 181 176 40 44 SP..1405 2.21156.685.4540.180 SPD45 - C40 - 4D - 180L 284 214 185 180 40 45 SP..1405 2.36156.685.4640.184 SPD46 - C40 - 4D - 184L 288 218 189 184 40 46 SP..1405 2.51156.685.4740.188 SPD47 - C40 - 4D - 188L 292 222 193 188 40 47 SP..1405 2.67156.685.4840.192 SPD48 - C40 - 4D - 192L 296 226 197 192 40 48 SP..1405 2.84156.685.4940.196 SPD49 - C40 - 4D - 196L 300 230 201 196 40 49 SP..1405 3.01156.685.5040.200 SPD50 - C40 - 4D - 200L 304 234 205 200 40 50 SP..1405 3.19

L

l1

l2

l3

d1D

INDEXABLE HIGH SPEED DRILLSPD 捨棄式快速鑽頭

ACCESSORIESInsert Screw Wrench

SP..1104 M4-9.35-5.65-60 T15SP..1405 M5-12.8-7.0-60 T20

Features:▸ Drilling depth is four times longer than the diameter of the High Speed Drill. ▸ The material is anti-vibration tool steel.▸ The whole body is treated with fine grinding after hardening in order to raise the rigidity and stability and prevent from deformation.▸ There is special coating on the surface of the high speed drill, which decreases the wear rate and extends the use life of the drill.Product information:▸ Inserts are optional accessories. Need to be purchased additionally.

4D

General catalogue U-25

QH

L

MODEL NO. TYPE L l1 l2 l3 D d1 INSERT WEIGHT(KGS)

156.685.1625.080 SPD16 - C25 - 5D - 80L 162 106 85 80 25 16 SP..0602 0.38

156.685.1725.085 SPD17 - C25 - 5D - 85L 167 111 90 85 25 17 SP..0602 0.40

156.685.1825.090 SPD18 - C25 - 5D - 90L 172 116 95 90 25 18 SP..0602 0.42

156.685.1925.095 SPD19 - C25 - 5D - 95L 177 121 100 95 25 19 SP..0602 0.44

156.685.2025.100 SPD20 - C25 - 5D - 100L 182 126 105 100 25 20 SP..0602 0.46

156.685.2125.105 SPD21 - C25 - 5D - 105L 187 131 110 105 25 21 SP..0602 0.49

156.685.2225.110 SPD22 - C25 - 5D - 110L 192 136 115 110 25 25 SP..07T3 0.50

156.685.2332.115 SPD23 - C32 - 5D - 115L 203 143 120 115 32 23 SP..07T3 0.75

156.685.2432.120 SPD24 - C32 - 5D - 120L 208 148 125 120 32 24 SP..07T3 0.77

156.685.2532.125 SPD25 - C32 - 5D - 125L 213 153 130 125 32 25 SP..07T3 0.80

156.685.2632.130 SPD26 - C32 - 5D - 130L 218 158 135 130 32 26 SP..07T3 0.83

156.685.2732.135 SPD27 - C32 - 5D - 135L 223 163 140 135 32 27 SP..07T3 0.87

156.685.2832.140 SPD28 - C32 - 5D - 140L 230 170 145 140 32 28 SP..0904 0.93

156.685.2932.145 SPD29 - C32 - 5D - 145L 235 175 150 145 32 29 SP..0904 0.97

156.685.3032.150 SPD30 - C32 - 5D - 150L 240 180 155 150 32 30 SP..0904 1.01

156.685.3132.155 SPD31 - C32 - 5D - 155L 245 185 160 155 32 31 SP..0904 1.06

156.685.3232.160 SPD32 - C32 - 5D - 160L 250 190 165 160 32 32 SP..0904 1.11

156.685.3332.165 SPD33 - C32 - 5D - 165L 255 195 170 165 32 33 SP..0904 1.17

156.685.3432.170 SPD34 - C32 - 5D - 170L 260 200 175 170 32 34 SP..1104 1.27

156.685.3532.175 SPD35 - C32 - 5D - 175L 265 205 180 175 32 35 SP..1104 1.38

156.685.3632.180 SPD36 - C32 - 5D - 180L 270 210 185 180 32 36 SP..1104 1.50

156.685.3732.185 SPD37 - C32 - 5D - 185L 275 215 190 185 32 37 SP..1104 1.62

156.685.3832.190 SPD38 - C32 - 5D - 190L 280 220 195 190 32 38 SP..1104 1.75

156.685.3932.195 SPD39 - C32 - 5D - 195L 285 225 200 195 32 39 SP..1104 1.89

156.685.4040.200 SPD40 - C40 - 5D - 200L 304 234 205 200 40 40 SP..1104 2.96

156.685.4140.205 SPD41 - C40 - 5D - 205L 309 239 210 205 40 41 SP..1104 3.12

L

l1

l2

l3

d1D

INDEXABLE HIGH SPEED DRILLSPD 捨棄式快速鑽頭5D

ACCESSORIESInsert Screw Wrench

SP..0602 M2.2-5.2-3.1-60 T7SP..07T3 M2.5-6.33-3.5-48 T8SP..0904 M3.5-8.4-5.0-60 T10SP..1104 M4-9.35-5.65-60 T15

Features:▸ Drilling depth is five times longer than the diameter of the High Speed Drill. ▸ The material is anti-vibration tool steel.▸ The whole body is treated with fine grinding after hardening in order to raise the rigidity and stability and prevent from deformation.▸ There is special coating on the surface of the high speed drill, which decreases the wear rate and extends the use life of the drill.Product information:▸ Inserts are optional accessories. Need to be purchased additionally.

General catalogueU-26

QH

L

°

MODEL NO. TYPE L l1 l2 d1 d2 INSERT WEIGHT(KGS)

140.764.16R.060 PSC32 - STFCR16 - D11 79 60 50 16 11 TP..1103 0.27140.764.16L.060 PSC32 - STFCL16 - D11 79 60 50 16 11 TP..1103 0.27140.764.20R.070 PSC32 - STFCR20 - E11 89 70 61 20 13 TP..1103 0.35140.764.20L.070 PSC32 - STFCL20 - E11 89 70 61 20 13 TP..1103 0.35140.764.25R.085 PSC32 - STFCR25 - FX16 104 85 75 25 17 TP..1603 0.50140.764.25L.085 PSC32 - STFCL25 - FX16 104 85 75 25 17 TP..1603 0.50141.764.16R.060 PSC40 - STFCR16 - D11 84 60 49 16 11 TP..1103 0.34141.764.16L.060 PSC40 - STFCL16 - D11 84 60 49 16 11 TP..1103 0.34141.764.20R.070 PSC40 - STFCR20 - E11 94 70 59 20 13 TP..1103 0.42141.764.20L.070 PSC40 - STFCL20 - E11 94 70 59 20 13 TP..1103 0.42141.764.25R.080 PSC40 - STFCR25 - F16 104 80 40 25 17 TP..1603 0.55141.764.25L.080 PSC40 - STFCL25 - F16 104 80 40 25 17 TP..1603 0.55141.764.32R.100 PSC40 - STFCR32 - H16 124 100 91 32 22 TP..1603 0.87141.764.32L.100 PSC40 - STFCL32 - H16 124 100 91 32 22 TP..1603 0.87

PSC / STFC INTERNAL BORING BARPSC / STFC 內徑車刀架

ACCESSORIESInsert Screw Wrench

TP..1103 M3-8.0-4.0-43 T9TP..1603 M4-10-5.0-43 T15

Product information:▸ Inserts are optional accessories. Need to be purchased additionally.

General catalogue U-27

QH

L

MODEL NO. TYPE l1 l2 l3 l4 l5 D d1 T1APPLICABLE MACHINE

WEIGHT(KGS)

161.C25.073 AL3 x C25 - 73 73 25 23 26 23 25 45.5 PF1/8 - 0.48161.C32.080 AL3 x C32 - 80 80 18 30 26 30 32 45.5 PF1/8 - 0.53161.C32.080A AL3 x C32 - 80 - A 80 18 30 26 30 32 45.5 PF1/8 OR 0.57161.C40.100 AL3 x C40 - 100 100 18 37 26 37 40 45.5 PF1/8 - 0.94162.C40.100 AL4 x C40 - 100 99.5 20.5 37 28 37 40 51.5 PF1/8 - 0.99162.C40.100A AL4 x C40 - 100 - A 99.5 20.5 37 28 37 40 51.5 PF1/8 OR 0.98162.C40.100B AL4 x C40 - 100 - B 99.5 20.5 37 28 38.5 40 51.5 PF1/8 YIPC 0.99163.C50.120 AL5 x C50 - 120 120 24 47 33 47 50 61.5 PF1/8 - 1.82

AL ADAPTER FOR QHL TOOL HOLDER

AL 車床套筒

Features:▸ Used for lathe.▸ Quick change design.▸ Modular system: internal hole 25 32 40 50.

OptionWrench

P.W-63

General catalogueU-28

QH

L

HIGH-PRESSURE COOLANT PIPE

MODEL NO. TYPE LENGTHMAX.

WATERPRESSURE

310.A.150 HOSE - A - 150 150 80 bar310.A.200 HOSE - A - 200 200 80 bar310.B.150 HOSE - B - 150 150 80 bar310.B.200 HOSE - B - 200 200 80 bar310.C.150 HOSE - C - 150 150 80 bar310.C.200 HOSE - C - 200 200 80 bar

PSC 高壓水管