OMKA-OMEGA OLCME KONTROL SISTEMLERI KALIBRASYON ... · OMKA-OMEGA OLCME KONTROL SISTEMLERI...

This is to attest that

OMKA-OMEGA OLCME KONTROL SISTEMLERI KALIBRASYON LABORATUVAR CIHAZLARI SAN. TIC. LTD. STI

1348 SOK NO: 5/401, TEKNIK MALZEME ISMERKEZI YENISEHIR/IZMIR 35110, TURKEY

Calibration Laboratory CL-142

has met the requirements of AC204, IAS Accreditation Criteria for Calibration Laboratories, and has demonstrated compliance with the ISO/IEC Standard 17025:2017, General requirements for the competence of testing and calibration laboratories. This organization is accredited to provide the services specified in the scope of accreditation maintained on the IAS website (www.iasonline.org).

This certificate is valid up to August 1, 2020.

(See laboratory’s scope of accreditation for fields of calibration and accredited calibration.)

Raj Nathan President

This accreditation certificate supersedes any IAS accreditation bearing an earlier effective date. The certificate becomes invalid upon suspension, cancellation or revocation of accreditation. See www.iasonline.org for current accreditation information, or contact IAS at 562-364-8201.

http://www.iasonline.org/


IAS Accreditation Number CL-142 Accredited Entity OMKA-OMEGA OLCME KONTROL SISTEMLERI

KALIBRASYON LABORATUVAR CIHAZLARI SAN. TIC. LTD. STI

Address 1348 Sok No: 5/401, Teknik Malzeme Ismerkezi, Yenisehir/Izmir, 35110 Turkey

Contact Name Serap Koktas Koca Telephone +90 232 459 6263 Effective Date of Scope November 26, 2019 Accreditation Standard ISO/IEC 17025:2017

CALIBRATION AND MEASUREMENT CAPABILITY (CMC)1,2

CALIBRATION AREA RANGE EXPANDED

UNCERTAINTY3 (±) TECHNIQUE, REFERENCE STANDARD, EQUIPMENT

International Accreditation Service, Inc. 3060 Saturn Street, Suite 100, Brea, California 92821 U.S.A.

Telephone +1 562-364-8201 — [email protected] www.iasonline.org

Page 1 of 16

Dimensional Dial Indicator 0 mm to 100 mm 1.7 μm ULM 300 Universal Length

Measurement Calipers 0 mm to 450 mm

450 mm to 900 mm 900 mm to 2000 mm

16 μm 20 µm 34 µm

Gauge Blocks

Height Gauges 0 mm to 450 mm 450 mm to 900 mm 900 mm to 2000 mm

16 μm 20 µm 34 µm

Micrometers 0 mm to 25 mm 25 mm to 175 mm

175 mm to 1000 mm

3.1 μm 4.0 µm 10 µm

Rules 1 mm to 1000 mm 0.11 mm Linear Standard Tapes 0 mm to 1000 mm

1000 mm to 5000 mm 5000 mm to 10000 mm 10000 mm to 20000 mm 20000 mm to 30000 mm 30000 mm to 40000 mm 40000 mm to 50000 mm

0.17 mm 0.25 mm 0.39 mm 0.73 mm 1.1 mm 1.4 mm 1.8 mm

Steel Ruler Dino Lite

Snap Gauges 10 mm to 150 mm 2.4 μm ULM 300 Universal Length Measurement Ring Gauges 10 mm to 150 mm 2.4 μm

Plug Gauges 0.5 mm to 100 mm 1.7 μm Thread Plug Gauges (only Pitch Φ)

Up to M100 4.1 μm

Thread Ring Gauges (only Pitch Φ)

M14 to M150 4.1 μm

Gauge Block 0 mm to 125 mm 0.56 μm Feeler Gauge 0 mm to 6 mm 0.80 μm ULM 300 Universal Length

Measurement Micrometer Setting Bar 0 mm to 125 mm 0.64 μm ULM 300 Universal Length

Measurement Miter 0 mm to 300 mm 2.4 μm Reference Calibrator

mailto:[email protected]



CALIBRATION

AREA RANGE EXPANDED UNCERTAINTY3 (±)

TECHNIQUE, REFERENCE STANDARD, EQUIPMENT

CL-142 Page 2 of 16 OMKA-OMEGA OLCME KONTROL SISTEMLERI KALIBRASYON LABORATUVAR CIHAZLARI SAN. TIC. LTD. STI

Thickness Meter 0 mm to 2 mm 0.82 μm Thickness Foil Gauge Block

Depth Caliper 0 mm to 300 mm 9.5 μm Gauge Block Depth Micrometer 0 mm to 175 mm 3.5 μm Gauge Block Radius Gauge 6.5 mm (R1) to 50 mm(R25) 9 μm Glass Rule – Dino Lite Sieve 0 mm to 200 mm 9 μm Reference Calibrator Spirit Level. Angle Meter

0° to 90° 0.26° Angle Gauge

Thickness Comparator

0 mm to 25 mm 0.82 μm Thickness Foil Gauge Block

Thickness Foil 0 mm to 6 mm 0.80 μm ULM 300 Universal Length Measurement

Passometer 0 mm to 2 mm 0.80 μm Thickness Foil. Gauge Block

Thickness Gauge 0 mm to 10 mm 10 mm to 50 mm 50 mm to 100 mm

1.5 µm 1.9 µm 2.9 µm

Thickness Foil. Gauge Block

Two Dimensional Measurement Device

0 mm to 200 mm 9.4 µm Glass Ruler

Profile Projector 0 mm to 200 mm 9.4 µm Glass Ruler Levels - Mira 0 mm to 1000 mm

1000 mm to 5000 mm 5000 mm to 10000 mm 10000 mm to 20000 mm 20000 mm to 30000 mm 30000 mm to 40000 mm 40000 mm to 50000 mm

0.18 mm 0.25 mm 0.39 mm 0.73 mm 1.1 mm 1.4 mm 1.8 mm

Steel Ruler. Dino Lite

Sample Cutters - Diameter of cut sample

20 mm to 150 mm 0.11 mm Linear Standard

Wrap Reel Tester Circumference of the Circle

200 mm to 1000 mm 0.11 mm Linear Standard

Slide Ruler 1 mm to 1000 mm 0.11 mm Linear Standard Spray Rating 1.5 mm to 300 mm 0.11 mm Linear Standard Shrinkage Schedule -Linear

100 mm to 350 mm 0.1 mm Linear Standard 0.1 % to 30 % 0.02 % Linear Standard

Mechanical Torque Wrench 1 N·m to 1000 N·m 0.2 % Reference Torque Calibrator Tachometer 10 rpm to 1000 rpm

1000 rpm to 10000 rpm 10000 rpm to 99999 rpm

0.0096 rpm 0.096 rpm 9.7 rpm

M140 Meatest Multifunction Calibrator

Centrifuge 10 rpm to 1000 rpm 1000 rpm to 10000 rpm 10000 rpm to 99999 rpm

1.6 rpm 11 rpm 76 rpm

Tachometer


CALIBRATION




Pipettes - Gravimetric Method

0L to 1 mL 1 mL to 10 mL 10 mL to 25 mL 25 mL to 50 mL 50 mL to 100 mL 100 mL to 200 mL

0.06 µL 0.2 µL 0.3 µL 0.4 µL 1.8 µL 2.1 µL

Balance Distilled Water

Burettes - Gravimetric Method

0.05 mL to 10 mL 10 mL to 50 mL 50 mL to 100 mL

0.2 µL 0.3 µL 1.8 µL

Cylinders -Gravimetric Method

2 mL to 10 mL 10 mL to 25 mL 25 mL to 50 mL 50 mL to 100 mL 100 mL to 250 mL 250 mL to 500 mL

500 mL to 1.000 mL 1.000 mL to 2.000 mL

0.2 µL 0.3 µL 0.4 µL 1.8 µL 3.6 µL 6.4 µL 25 µL 26 µL

2000 mL to 10000 mL 10000 mL to 20000 mL 20000 mL to 30000 mL 30000 mL to 40000 mL 40000 mL to 50000 mL

1.3 mL 2.1 mL 3.1 mL 3.7 mL 4.5 mL

Balance Distilled Water OIML R-120. Clause 3

Pycnometers -Gravimetric Method

Up to 10 mL 10 mL to 25 mL 25 mL to 50 mL 50 mL to 100 mL

0.2 µL 0.3 µL 0.4 µL 0.5 µL


Pressure -0.85 bar to 10 bar 10 bar to 700 bar

1.6 mbar 0.37 bar

Pressure/Vacuum Calibrator Pressure Calibrator

Pressure Transmitter

0 mA to 20 mA -0.85 bar to 10 bar 10 bar to 700 bar

3.4 µA 1.6 mbar 0.37 bar

Pressure Calibrator. Reference Multimeter. Beamex

Shore Meter A (Durometer)

0 Shore to 96 Shore 2.1 Shore Shore Test Block

Shore Meter D (Durometer)

0 Shore to 88 Shore 2.1 Shore Shore Test Block

Hardness Tester-Rockwell Scale

24 HRC to 64 HRC 0.67 HRC Reference Block

Hardness Tester-Vickers Scale

HV 0.2 to HV 434 0.93 % Reference Block

Hardness Tester-Brinell Scale

HB 2.5/62.5 to HB 10/3000 0.94 % Reference Block


CALIBRATION




Hardness Tester-Rockwell Gauge

24 HRC to 64 HRC 0.62 HRC Reference Gauge & Reference Calibrator

Rockwell intender 119° ≤ α ≤ 121° 0.06° Rockwell Axial Deflection Angle α

0° ≤ α ≤ 1° 0.06°

Hardness Tester-Vickers Gauge

HV 0.2 to HV 434 0.93 %

Vickers intender 135° ≤ α ≤ 137° 0.06º Vickers Axial Deflection Angle α

0° ≤ α ≤ 1° 0.06°

Indenter Diameter R 0 mm ≤ R ≤ 10 mm 0.4 µm Reference Gauge & Reference Calibrator Indenter Linearity S 0 mm ≤ S ≤ 1 mm 0.4 µm

Indenter Length L 0 mm ≤ L ≤ 0.2 mm 0.4 µm Load cell - Dynamometer

1 N to 50 kN 0.23 % Reference Dead Weight-Load Cell

Pull Push Force Gauge

1 N to 2 MN 0.97 % Reference Load Cell

Concrete Pressure Testing

2 N to 2 MN 1.2 % Reference Load Cell

Notch Impact Tester

1 J to 300 J 1.3 % Reference calibrator

Izod Impact Tester 2 J to 300 J 1.3 % Reference calibrator Scales and Balances

0 g to 1 g 1 g to 10 g

10g to 100 g 100 g to 250 g 250 g to 500 g 500 g to 1000g 0 kg to 40 kg 0 kg to 600 kg

600 kg to 1000 kg 1000 kg to 2000 kg 2000 kg to 3000 kg

0,013 mg 0.026 mg 0.065 mg 0.17 mg 0.33 mg 0.58 mg

0.9 g 39 g

0.06 kg 0.13 kg 0.19 kg

E2 Class Weights E2 Class Weights E2 Class Weights E2 Class Weights E2 Class Weights E2 Class Weights F1 Class Weights M1 Class Weights M1 Class Weights M1 Class Weights M1 Class Weights

F1 Mass 1 mg to 500 mg 1 g to 5 g

10 g 20 g 50 g 100 g 200 g 500 g 1 kg 2 kg 5 kg

0.01 mg 0.02 mg 0.03 mg 0.04 mg 0.05 mg 0.11 mg 0.15 mg 0.77 mg 2.6 mg 8.6 mg 14 mg

E2 MASS SET


CALIBRATION




F2 Mass 1 mg to 2 mg 5 mg to 10 mg 20 mg to 50 mg

100 mg to 200 mg 500 mg

1 g 2 g to 5 g

10 g 20 g 50 g 100 g 200 g 500 g 1 kg 2 kg 5 kg 10 kg 20 kg

0.01 mg 0.07 mg 0.02 mg 0.03 mg 0.04 mg 0.05 mg 0.08 mg 0.10 mg 0.13 mg 0.15 mg 0.26 mg 0.49 mg 1.4 mg 2.6 mg 8.6 mg 14 mg 75 mg 86 mg

E2 MASS SET

M1 Mass 1 mg to 5 mg 10 mg 20 mg 50 mg 100 mg

0.03 mg 0.06 mg 0.05 mg 0.06 mg 0.1 mg

E2 –F1 MASS SET

200 mg 500 mg

1 g 2 g 5 g 10 g 20 g 50 g 100 g 200 g 500 g 1 kg 2 kg 5 kg 10 kg 20 kg

0.1 mg 0.13 mg 0.15 mg 0.2 mg 0.25 mg 0.31 mg 0.4 mg 0.49 mg 0.8 mg 1.5 mg 4.0 mg 8.0 mg 17 mg 40 mg 0.11 g 0.17 g


CALIBRATION




M2 Mass

100 mg 200 mg 500 mg


0.26 mg 0.31 mg 0.4 mg 0.49 mg 0.61 mg 0.79 mg 0.98 mg 1.3 mg 1.5 mg 2.5 mg 4.9 mg 13 mg 25 mg 49 mg 0.13 g 0.26 g 0.49 g

E2-F1 MASS SET

M3 Mass


1.5 mg 2.0 mg 2.5 mg 3.1 mg 4.0 mg 4.9 mg 7.9 mg 15 mg 40 mg 79 mg 0.15 g 0.40 g 0.80 g 1.5 g

E2 –F1 MASS SET

Sound Level – Generate4

94 dB at 1 kHZ 114 dB at 1 kHz

0.21 dB 0.21 dB

SC-05 Sound Generator

Perspirometer 100 g to 5100 g 0.9 g E2. F1 Class weights Twist Tester up to 100 g

100 g to 1000 g 0.8 mg 0.9 g

E2. F1 Class Weights

Yarn Tension Meter up to 100 g 100 g to 1000 g

0.8 mg 0.9 g

E2. F1 Class Weights

Anemometer 1 m/s to 3 m/s 3 m/s to 5 m/s 5 m/s to 20 m/s

2.3 % 1.2 % 0.9%

Reference Anemometer

Tumble Dryers 30 °C to 80 °C 0.51 °C SPRT & Calibration Baths up to 1 Hz 8.7 x 10-5 Hz M140 Meatest Multifunction

Calibrator 40 rpm to 100 rpm 0.01 rpm 550 mm to 1000 mm 0.11 mm Linear Standard


CALIBRATION




Reference Washing Machines (including wascator)

up to 1 Hz 8.7 x 10-5 Hz M140 Meatest multifunction Calibrator at 52 rpm and 500 rpm 0.01 rpm

25 °C to 80 °C 0.51 °C SPRT and Calibration Baths 50 mm to 200 mm 0.11 mm Linear Standard

1 kg to 20 kg 0.9 g E2. F1 Class Weights Gyrowash and Washwheels

30 °C to 95 °C 0.51 °C SPRT & Calibration Baths up to 1 Hz 8.7x10-5 Hz M140 Meatest Multifunction

Calibrator 38 rpm to 42 rpm 0.01 rpm 500 mL to 600 mL

1100 mL to 1300 mL 1.4 mL 2.9 mL


100 mm to 220 mm 0.11 mm Linear Standard Random Tumble Pilling Testers

1200 rpm 0.01 rpm M140 Meatest Multifunction Calibrator up to 1 Hz 8.7 x 10-5 Hz

0.0069 to 1.035 bar 0.01 bar Pressure Calibrator 5 mm to 160 mm 0.11 mm Linear Standard

Pilling Testers (Box & Drum

30 rpm to 60 rpm 0.01 rpm M140 Meatest Multifunction Calibrator 30 rpm to 60 rpm 0.01 rpm

5 mm to 320 mm 0.11 mm Linear Standard Burst Strength Testers

up to 1 Hz 8.7 x 10-5 Hz M140 Meatest multifunction Calibrator

0 bar to 10 bar 10 to 15 bar

0.01 bar 0.42 bar

Pressure Calibrator

0 mm to 120 mm 0.11 mm Linear Standard Frame Textile Flammability Testers

up to 1 Hz 8.7 x 10-5 Hz M140 Meatest Multifunction Calibrator

10° to 90° 0.26° Digital Protractor Angle Gauge

1 mm to 800 mm 0.11 mm Linear Standard Hydrostatic Head 0 bar to 1.5 bar

1.5 bar to 3.5 bar 0.01 bar

0.0016 bar Pressure Calibrator

0 mm to 140 mm 0.11 mm Linear Standard Scorch / Sublimation

70 °C to 250 °C 0.51 °C SPRT and Calibration Baths up to 1 Hz 8.7 x 10-5 Hz M140 Meatest Multifunction

Calibrator 1.5 mm to 300 mm 0.11 mm Linear Standard

500 g to 5000 g 0.9 g E2. F1 Class Weights Spray Rating up to 1 Hz 8.7 x 10-5 Hz M140 Meatest Multifunction

Calibrator 250 mL 0.29 mL Balance

Distilled Water Crockmeters 0.1 kg to 1.1 kg 0.9 g E2. F1 Class Weights

10 rpm to 60 rpm 0.01 rpm M140 Meatest Multifunction Calibrator

5 mm to 110 mm (stroke) 5 mm to 15 mm (peg diameter)

0.11 mm 0.11 mm

Linear Standard


CALIBRATION




Melt Flow

50 °C to 300 °C 0.1 °C Reference Thermometer 500 g to 10000 g 0.30 g Balance 0 mm to 50 mm 15 µm Dino Lite - Reference

Micrometer Shirley Crease Recovery

10° to 180° 0.26° Digital Protractor Angle Gauge

200 g to 2000 g 0.9 g E2. F1 Class Weights 1.5 mm to 200 mm 0.11 mm Linear Standard

Abrasion Machines Textile Testing Machines and Martindale


0.5 mm to 60 mm 0.1 mm Linear Standard 100 g to 3000 g 0.9 g E2. F1 Class Weights

Shirley Water Vapour Permeability


1.5 mm to 100 mm 0.11 mm Linear Standard Biomedical

Electrical Medical Safety -

M140 Meatest Multifunction Calibrator Test Load 0.1 kVA to 5 kVA 3 %

Insulation Res. 1 MΩ to 150 MΩ 0.50 MΩ Test Current 0.1 A to 50 A 12 mA Leakage Current 10 µA to 10000 µA 3.4 µA Earth Bond Test 0.1 Ω to 5 Ω 0.17 Ω

Pacer - Test Load 1 Ω to 1000 Ω 0.37 Ω Width 10 ms to 100 ms 0.1ms Amplitude 1 mA to 200 mA 3.4 µA

FTR Ultrasound 0.5 W to 10 W 1.3x10-4 W FTR Device –

Pulse 1 Hz to 500 Hz 0.06 Hz Time 1 µs to 500 µs 0.58 µs Current 1 mA to 500 mA 60 µA

Electrocardiography Amplitude 0.1 mV to 10 mV 41 µV High Level Output

Amplitude 0.05 V to 10 V 0.01 %

Performance Tests 0.1 Hz to 500 Hz 0.06 Hz NSR 30 BPM to 300 BPM 1 %


CALIBRATION




Patient Monitor - M140 Meatest Multifunction Calibrator

Amplitude 0.1 mV to 10 mV 41 µV High Level Output

Amplitude 0.05 V to 10V 0.01 %

Performance Tests 0.1 Hz to 500 Hz 0.06 Hz NSR 30 BPM to 300 BPM 1 % Temperature YSI 32 °C to 42 °C 0.07 °C Blood Pressure Specs

0.1 mmHg to 300 mmHg 0.1 %

Respiration Baseline Impedance

0.1 Ω to 5000 Ω (0.5 Hz to 15 Hz)

1.9 Ω

Spo2 Simulator Test Load

0.1 Ω to 5000 Ω / 80 % to 100 % 1.9 Ω

Electrocautery - M140 Meatest Multifunction Calibrator

Test Load 0.1 kVA to 5 kVA 3% Insulation

Resistance 1 MΩ to 150 MΩ 0.29 MΩ

Test Current 0.1 A to 50 A 16 mA Leakage Current 10 µA to 10000 µA 3.4 µA Earth Bond Test 0.1 Ω to 5 Ω 0.17 Ω Sphygmonometer 0 mmHg to 300 mmHg 0.1 % Phototheraphy 10 µW/cm2 to 2000 µW/cm2 0.1 % Aspirator -0.85 bar to 0 bar 1.6 mbar Incubator -

Humidity 10 %RH to 90 %RH

(30 °C to 40 °C) 1.13 %

Incubator - Temperature

5 °C to 70 °C 0.1°C

Incubator - Airflow 0.1 m/s to 1 m/s 0.1 % Incubator - Sound

Level 30 dBA to 90 dBA 0.35 dBA

Pulse Oximeter - SP02 Simulator Test Load

0.1 kΩ to 100 kΩ 0.17 Ω

Patient Simulator - M140 Meatest Multifunction Calibrator Amplitude 0.1 mV to 10 mV 41 µV

High Level Output Amplitude

0.05 V to 10 V 0.01 %

Performance Tests 0.1 Hz to 500 Hz 0.06 Hz NSR 30 BPM to 300 BPM 1 % Temperature YSI 1000 Ω to 7000 Ω 1.9 Ω Blood Pressure

Specs 0.1 mmHg to 300 mmHg 0.1 %

Respiration Baseline Impedance

0.1 Ω to 5000 Ω (0.5 Hz to 15 Hz)

1.9 Ω

ECG Rate 30 BPM to 300 BPM 1 %


CALIBRATION




Fetal Simulator – Amplitude

0.1 mV to 10 mV 0.1 % M140 Meatest Multifunction Calibrator Defibrillator

Analyzer -

Test Load 1 Ω to 100 Ω 0.17 Ω Energy

Measurement 1 J to 400 J 1 %

Voltage Measurement

50 V to 5000 V 0.1 %

Current Measurement

1 A to 100 A 20 mA

ECG Rate 30 BPM to 300 BPM 1 % Performance

Waves 0.1 Hz to 100 Hz 0.06 Hz

SPO2 Simulator Test Load

0.1 kΩ to 100 kΩ 0.37 Ω

NST - ECG Rate 30 BPM to 300 BPM 0.1 % Amplitude 0.1 mV to 10 mV 41 µV

Pacer Analyzer - M140 Meatest Multifunction Calibrator

Test Load 1 Ω to 100 Ω 100 Ω to 400 Ω 400 Ω to 1000 Ω

47 mΩ 96 mΩ 0.12 Ω

Width 1 Hz to 10 Hz 10 Hz to 100 Hz

100 Hz to 1000 Hz

8.7 x 10-5 Hz 1.7 x 10-4 Hz 1.7 x 10-3 Hz

Amplitude 1 mA to 20 mA 20 mA to 200 mA

3.4 µA 30 µA

Spo2 Simulator - Test Load

0.1 to 100 kΩ / 80 %-100 %

37 Ω


Electrosurgery Analyzer -

M140 Meatest Multifunction Calibrator Test Load 1 Ω to 1000 Ω 0.37 Ω

Energy Measurement

5 W to 500 W 1.3 W


CALIBRATION




Electrical Medical Safety Analyzer -

M140 Meatest Multifunction Calibrator Test Load 0.1 kVA to 5 kVA 3%

Insulation Resistance

1 MΩ to 10 MΩ 10 MΩ to 50 MΩ 50 MΩ to 150 MΩ

16 kΩ 30 kΩ 64 kΩ

Test Current 100 mA to 200 mA 200 mA to 1000 mA

1 A to 50 A

1.3 mA 5.8 mA 6.4 mA

Leakage Current 10 µA to 2 mA 2 mA to 10 mA

0.6 µA 2.1 µA

Earth Bond Test 0.1 Ω to 5 Ω 0.17 Ω Thermal

RTD Temperature Sensors

-80 °C to 20 °C 20 °C to 90 °C 90 °C to 230 °C 230 °C to 420 °C 420 °C to 650 °C

0.07 °C 0.06 °C 0.06 °C 0.10 °C 0.16 °C

SPRT Calibration Baths

Liquid In Glass Thermometers

-80 °C to 20 °C 20 °C to 90 °C 90 °C to 230 °C 230 °C to 420 °C

0.08 °C 0.08 °C 0.08 °C 0.10 °C

Thermocouples (S-T-R-B-E-J-K-N)

-80 °C to 20 °C 20 °C to 90 °C 90 °C to 230 °C 230 °C to 420 °C 420 °C to 650 °C 650 °C to 1200 °C

0.08 °C 0.08 °C 0.11 °C 0.11 °C 2.0 °C 2.5 °C

SPRT S Type Thermocouples Calibration Baths

Thermometers -80 °C to 20 °C 20 °C to 90 °C 90 °C to 230 °C 230 °C to 420 °C 420 °C to 650 °C 650 °C to 1200 °C

0.07 °C 0.08 °C 0.10 °C 0.10 °C 2.0 °C 2.5 °C

Radiation Thermometers


0.07 °C 0.08 °C 0.10 °C 2.0 °C 2.5 °C

Furnace 200 °C to 900 °C 900 °C to 1200 °C

4.0 °C 4.5 °C

S Type Thermocouple

Climatic Chambers - Temperature

-80 °C to 420 °C 420 °C to 700 °C 700 °C to 1000 °C

0.45 °C 2.1 °C 2.6 °C

K Type Thermocouples

Climatic Chambers – Humidity

20 %RH to 90 %RH (-25 °C to 30 °C)

1.3 %RH Humidity Dataloggers

Autoclave 0 °C to 140 °C 1.1 °C Data Logger EBRO


CALIBRATION




Dataloggers -30 °C to 25 °C 0.82 °C Reference Thermometer. Datalogger

Humidity (RH) Thermography

20 %RH to 90 %RH 1.2 %RH Reference calibrator

Electronic Moisture Meter - Humidity

20 % to 90 % 1.7 % Humidity Cabinet Humidity Probe

Heat Meter

-30 °C to 90 °C

0.5 °C

Reference calibrator OIML-R120. Clause 3

Surface Thermometer


0.07 °C 0.08 °C 0.1 °C 2.0 °C 2.5 °C

SPRT S Type Thermocouples Calibration Baths

Hot Plate 0 °C to 20 °C 20 °C to 90 °C 90 °C to 420 °C 420 °C to 700 °C 700 °C to 1200 °C

0.13 °C 0.14 °C 0.16 °C 2.0 °C 2.5 °C

Reference Thermometer

Temperature Transmitter


0.07 °C 0.08 °C 0.10 °C 2.0 °C 2.5 °C

SPRT S Type Thermocouples Beamex Reference Multimeter Calibration Baths

Clinical Thermometer

25 °C to 45 °C 0.1 °C M140 Meatest Multifunction Calibrator

Electrical/DC/Low Frequency DC Voltage Measure5

20 mV to 200 mV 200 mV to 2 V

2 V to 20 V 20 V to 240 V

240 V to 1000 V

3.7 μV 12 μV

130 mV 1.3 mV 0.042 V


DC High Voltage Measure5

0.5 kV to 1 kV 1 kV to 5 kV 5 kV to 10 kV 10 kV to 20 kV 20 kV to 30 kV

0.013 kV 0.021 kV 0.033 kV 0.1 kV

0.041 kV

High Voltage Probe. Multimeter

DC Current Measure5

200 μA to 2 mA 2 mA to 20 mA

20 mA to 200 mA 200 mA to 2 A

2 A to 20 A

45 nA 0.38 μA 13 μA

0.47 mA 9.4 mA

M140 Meatest Multifunction


CALIBRATION




DC Resistance Measure5

1 Ω to 100 Ω 100 Ω to 400 Ω 400 Ω to 2 kΩ 2 kΩ to 10 kΩ 10 kΩ to 40 kΩ 40 kΩ to 200 kΩ 200 kΩ to 1 MΩ 1 MΩ to 4 MΩ 4 MΩ to 20 MΩ 20 MΩ to 50 MΩ

6 mΩ 59 mΩ 62 mΩ 0.7 Ω 5.8 Ω 9.3 Ω 70 Ω

0.8 kΩ 0.75 kΩ 8.2 kΩ


AC Voltage Measure5

200 mV to 2 V (50 Hz) (1 kHz) (10 kHz)

2 V to 20 V

(50 Hz) (1 kHz) (10 kHz)

20 V to 240 V

(50 Hz to 10 kHz)

240 V to 1000 V (50 Hz to 1 kHz)

0.3 mV 0.2 mV 0.3 mV

2.4 mV 2 mV

3.2 mV

31 mV

170 mV


High AC Voltage Measure5

0.5 kV to 1 kV (1 kHz)

1 kV to 5 kV

(1 kHz)

0.014 kV

0.030 kV

High Voltage Probe Multimeter

AC Current Measure5

2 mA to 20 mA (50 Hz) (1 kHz)

20 mA to 200 mA

(50 Hz) (1 kHz)

200 mA to 2 A

(50 Hz) (1 kHz)

2 A to 10 A

(50 Hz to 1 kHz)

10 A to 20 A (50 Hz) (1 kHz)

7.7 μA 6.9 μA

0.27 mA 0.27 mA

2.3 mA 2.3 mA

20 mA

24 mA 50 mA



CALIBRATION




Inductance – Generate4

0.1 mH to 1111 mH 0.01 mH Inductance Box

Capacitance – Generate4

0.001 μF to 0.01 μF 0.01 μF to0.1 μF 0.1 μF to 1 μF 1 μF to 50 μF

1.2 nF 5.1 nF 50 nF

0.55 μF

Capacitance Box

Power Analyzers and Power Meters – Generate4

Up to 100 W 100 W to 500 W 500 W to 1000 W 1000 W to 2000 W 2000 W to 5000 W

0.095 % 0.33 % 0.29 %

3 % 1.2 %

M140 Meatest Multifunction Calibrator Resistance Box

Electrical Power Generate4 (One-Phase to Three-Phase)

5000 W to 10000 W 10000 W to 20000 W 20000 W to 30000 W 30000 W to 40000 W 40000 W to 50000 W

1.1 % 3.0 % 2.8 % 2.1 % 2.6 %

DC Current – Generate4

20 mA to 100 mA 100 mA to 200 mA

200 mA to 1 A 1 A to 10 A

0.8 mA 1.3 mA 5.8 mA 0.23 A

M140 Meatest Multifunction Calibrator 50 Turn Coil

AC Current - Generate4

(50 Hz to 1 kHz) 20 mA to 200 mA

200 mA to 1 A 1 A to 10 A

1.3 mA 6.5 mA 88 mA

M140 Meatest Multifunction Calibrator 50 Turn Coil

DC Resistance – Generate4

1 Ω to 100 Ω 100 Ω to 400 Ω 400 kΩ to 2 kΩ 2 kΩ to 10 kΩ 10 kΩ to 40 kΩ 40 kΩ to 200 kΩ 200 MΩ to 1 MΩ 1 MΩ to 4 MΩ 4 MΩ to 20 MΩ 20 MΩ to 50 MΩ

50 mΩ 0.10 Ω

2 Ω 10 Ω 41 Ω

0.15 kΩ 0.59 kΩ 4.7 kΩ 47 kΩ

0.29 MΩ


Time/Frequency Frequency - Generate4

1 Hz to 10 Hz 10 Hz to 100 Hz 100 Hz to 1 kHz 1 kHz to 10 kHz

10 kHz to 100 kHz 100 kHz to 1 MHz 1 MHz to 10 MHz 10 MHz to 20 MHz

5.8x10-4 Hz 5.8x10-3 Hz 5.8x10-2 Hz 5.8x10-1 Hz

5.8 Hz 5.8x101 Hz 0.58 kHz 1.2 kHz


Time 0 min to 10 min 0.1 s Reference chronometer


CALIBRATION




Radiation Luxmeter 1 lux to 5000 lux 0.50 % Light box

Reference Lux meter Phototheraphy Radiometer

10 µW/cm2 to 2000 µW/cm2 1 % Electrical Multifunction Calibrator

Chemical

pH Meter Up to 14 pH 0.09 pH Reference Buffer Solutions Conductivity Meter 84 µS/cm to 12.880 µS/cm 1.7 % Alcohol Meter 0 % to 100 % 1.2 % Reference Solutions

Aero. Baume. Density Meters

0.8 g/cm3 to 2 g/cm3 1.2 %

Viscosity Meter 100 cPs to 23000 cPs 0.78 cPs Refractometer 0 %Brix to 100 %Brix 1.2 % Din Cup 8 mm2/s to 2000 mm2/s 0.78 mm2/s Biochemistry Reference Kit

Glucose 70 mg/dL to 105 mg/dL 17 % Urea 10 mg/dL to 50 mg/dL 15 % Creatinine 0.9 mg/dL to 1.5 mg/dL 26 % AST 10 u/L to 34 u/L 21 % ALT 9 u/L to 43 u/L 22 % Alkaline Phosphatase

30 u/L to 300 u/L 21 %

GGT 9 mg/dL to 43 mg/dL 23 % Ferro 23 mg/dL to 165 mg/dL 21 % Billirubins < 1 mg/dL 24 % Iron Binding Capacity

250 g/dl to 410 g/dl 24 %

HDL > 50 mg/dL 29 % LDL < 155 mg/dL 30 % Calcium 8.8 mg/dL to 10.2 mg/dL 33 % Cholesterol 140 mg/dL to 240 mg/dL 28 % LDH 210 u/L to 425 u/L 22 % Triglyceride 35 mg/dL to 160 mg/dL 18 % Uric Acid 2.4 mg/dL to 7.0 mg/dL 18 % Albumin 3.8 mg/dL to 5.4 g/dL 23 % Amylase < 82 U/L 21 %

Biochemistry - Spectrophotometer

200 nm to 900 nm 0.030 Abs to 3.500 Abs

0.49 % 0.01 Abs

Reference Solutions

1The uncertainty covered by the Calibration and Measurement Capability (CMC) is expressed as the expanded uncertainty having a specific coverage probability of approximately 95 %. It is the smallest measurement uncertainty that a laboratory can achieve within its scope of accreditation when performing more or less routine calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. The actual measurement uncertainty of a specific calibration performed by the laboratory may be greater than that


CALIBRATION




provided in the CMC due to the behavior of the customer’s device and to influences from the circumstances of the specific calibration. 2If information in this CMC is presented in non-SI units, the conversion factors stated in NIST Special Publication 811 “Guide for the Use of the International System of Units (SI)” apply. 3When uncertainty is stated in relative terms (such as percent, a multiplier expressed as a decimal fraction or in scientific notation), it is in relation to instrument reading or instrument output, as appropriate, unless otherwise indicated. 4Capability is suitable for the calibration of measuring devices in the stated ranges. 5Capability is suitable for the calibration of devices intended to generate the measurand in the stated ranges. ppm= parts per million Abs = absorbance BPM = beats per minute Cps = centipoise U/L = unit/litre

OMKA-OMEGA OLCME KONTROL SISTEMLERI KALIBRASYON ... · OMKA-OMEGA OLCME KONTROL SISTEMLERI...

Documents

Transcript of OMKA-OMEGA OLCME KONTROL SISTEMLERI KALIBRASYON ... · OMKA-OMEGA OLCME KONTROL SISTEMLERI...