OEM & Industrial Maintenance Catalog

We carry a complete line of Industrial Coatings along with all

the tools and equipment you will need to get your job done

right. We have a trained staff to provide you with a detailed

specification and a standard operating procedure for your

protective coating needs.

Why prime?

Metal primers serve two essential purposes:

1. Provide an essential layer of protection against corrosion.

2. Improve the finished appearance of a project by providing a smooth foundation for the finish coat.

Metal Primers protect metal from the detrimental effects of metal corrosion by two means:

1. Barrier protection.

Lower-cost metal primers (shop primers) form a continuous film that, along with the finish coat, prevent the contact of moisture and oxygen with the metal.

2. Corrosion and rust inhibition.

The best types of metal primers deliver barrier protection that is enhanced by corrosion inhibitors and rust inhibitive pigments to increase the performance and protective characteristics.

How to select a metal primer to meet your needs:

If your primary goal is to provide years of metal protection and ensure long life of the finish coat, select a corrosion and rust -inhibitive primer.

If price is the over-riding consideration and long-term product performance is secondary, a shop primer will provide adequate

OEM & IndustrialMaintenance Catalog

Rodda / Cloverdale Paint - Your Complete Industrial Source

Finish Coat

SubstratePrimer

How does metal corrosion occur?Simply stated, rust is formed and

metal corrosion begins when moisture and oxygen combine to

attack the metal surface.

MP-13.3.13

MP-2

Metal Primers

Rodda and Cloverdale Paint Industrial Protective Coatings

Product Description & Suggested Uses Barr

ier

Prot

ectio

n

Corr

osio

n-In

hibi

tion

Ferr

ous

/N

on-F

erro

us

Inte

rior /

Exte

rior

Appl

icat

ion

Dry

to T

ouch

Dry t

o Re

coat

Metal Master PrimerWater Based, Low VOC, Off White, Grey, Red Oxide

508901 & 508995

Yes Yes Both Yes 45 Min.Brush,Roll,

Spray4 Hours

Barrier III High SolidsRust inhibitive primer, Red oxide, Grey

708225 & 708295

Barrier IIIRust inhibitive primer, Grey, Red Oxide, Black, Off WhiteShop use only.

708001

All Purpose Rust Inhibitive Metal PrimerBrushable primer, Red oxide

708195

Quick Dry Iron Oxide P-80 Metal PrimerPrimer, Red Oxide

7981 & 34359

Quick Dry Shop PrimerRed OxideShop use only.

713301

Yes Yes YesFerrous

Yes 25-45Min.

Brush,Roll,

Spray3-6 Hours

Yes Yes YesFerrous

Yes 15 Min.Brush,Roll,

Spray1 Hour

Yes Yes YesFerrous

Yes 1 HourBrush,Roll,

Spray

Less than2 Hoursor after

48 Hours

Yes Yes YesFerrous


Spray1 Hour

Yes Yes YesFerrous


Spray3 Hours

ClovaBond PrimerWashcoat primerShop use only.

71007

Yes YesNon-Ferrous


Spray1 HourNo

High Solids Non-Lifting PrimerPrimer, Red Oxide, Grey

71046

Yes Yes YesFerrous


Spray

6 Hour


CorrosealRust Converting Metal Primer

82331

Yes Yes YesFerrous


Spray

20 Min3 Hours

3.3.13

ClovaPrime 21Low gloss

83021

1-2 Hours. 3-4 Hrs.Yes Yes YesFerrous

YesBrush,Roll,

Spray

OEM & Industrialmaintenance catalog

508901

Metal Master Primer

Fast Dry, Rust Inhibitor, Water Clean-up

Colors: Off White, Grey, Red Oxide, Black

An Interior / Exterior single component 100%

acrylic self cross-linking water-based primer for

use on bare metals, a corrosion resistant coating

for ferrous metal surfaces such as structural

steel, bridges, tanks, towers, piping, railings,

sash and trim, metal doors and frames,

ornamental iron, gutters, and miscellaneous

metal objects. Low VOC, quick dry, and low odor

make it an excellent primer for an OEM, light

industrial maintenance primer. Ok for clean

galvanized metal surfaces.

MPI #107, 134 Approved

Metal Primers

708225

Barrier III High Solids Primer

Pigmented, Short Oil, Phenolic Modified,Weldable, Alkyd Metal Primer

Colors: Off White, Red Oxide,

A low HAP's, high solids, high build, quick drying,

lead and chromate free rust inhibitive primer.

Formulated to allow for above standard dry film

protection in a single application. Barrier III High

Solids will provide good weathering characteris-

tics to protect metal in storage, transit, or during

erection. Provides weldable finish.

This primer has the ability to replace a multi-

tude of primers usually required to insure

compatibility with various topcoats. This primer

can be used over most old, well oxidized coat-

ings without wrinkling or lifting; thereby, allow-

ing for the possibility of upgrading present

surfaces to a more chmical resistant system.

Barrier III may be topcoated with a variety of

finish coats such as, alkyds, epoxies, most coal

tars, chlorinated rubber and emulsions. It has a

good weathering characteristics to protect

metal in storage, transit or during erection.

MPI #79, 95 ApprovedMP-3

Approved

VOCCompliant

US EPA AIM Rule

100%Acrylic

Adhesion test (ATSM D3359) results - steel 5, aluminum 5, galvanized 4

Adhesion test (ATSM D4541) results - >500psi

Hardness test (ASTM D2134) results - 10 rocker, (ASTM B117) results HB Pencil

Salt Fog Test (ASTM B117) results - 500 hrs EXCELLENT

Flexibility test (ASTM D522) results - 180 degree bend, 180 degree bend, 1/8” mandrel - PASS

Impact test (ASTM D2794) results - >160 lbs direct, >120 lbs reverse

Approved

VOCCompliant

US EPA AIM Rule

3.3.13

708001

Barrier III Rust Inhibitive Primer

Fast Dry Rust Inhibitor, Phenolic Modified

Colors: White, Red Oxide, Grey, Black

FOR SHOP USE ONLY.

An easily applied, multi-purpose, fast dry,

lacquer resistant, phenolic modified alkyd

primer. It is a valuable "lead and chromate free"

shop and industrial primer because of its ability

to replace a multitude of primers usually required

to insure compatibility with various topcoats.

This primer can be used over most old, well

oxidized coatings without wrinkling or lifting;

thereby, allowing for the possibility of upgrading

present surfaces to a more chemical resistant

system. Barrier III may be topcoated with a

variety of finish coats such as, alkyds, epoxies,

most coal tars, chlorinated rubber and emul-

sions. It has good weathering characteristics to

protect metal in storage, transit or during erec-

tion.

Metal Primers

708195

All Purpose Rust Inhibitive Metal Primer

Interior / Exterior Pigmented Medium / Long alkyd metal primer

Colors: Red Oxide

A high solids material designed for priming all

exterior or interior ferrous metal surfaces such

as structural steel, bridges, tanks, towers,

piping, sash and trim metal doors and frames,

ornamental iron, gutters, fire escapes and

miscellaneous metal objects. Rust inhibitive

pigment resists formation of rust, thus preserv-

ing the metal as well as the integrity of finishing

coats. Flexible film expands and contracts with

the substrate to maintain excellent adhesion.

MPI #23 Approved

MP-4


VOCCompliant

US EPA AIM Rule Approved

3.3.13

34359 & 7981

P-80 Quick Dry Iron Oxide Metal Primer

Pigmented phenolic modified alkyd primer

Colors: Red Oxide, Grey

FOR SHOP USE ONLY.

A quick drying lead and chromate free, rust

inhibitive primer formulated for priming both

interior and exterior iron and steel. A valuable

maintenance primer because of its ability to

replace a multitude of primers usually required

to insure compatibility with various topcoats.

P-80 has good weathering characteristics to

protect metal in storage, transit or during erection.

Also exhibits excellent weldable properties.

Metal Primers

MP-5

71330

Quick Dry Industrial Shop Primer

Industrial alkyd shop primer

Colors: Red Oxide

FOR SHOP USE ONLY.

A cost-effective, quick drying shop primer for

application to structural steel for interior exposure.

This product features high hiding, ease of

application and is compatible with a range of

architectural topcoats.

Recommended for shop application on interior

structural steel, metal trusses, joists or other

ferrous metal surfaces exposed to mildly corrosive

environments.


3.3.13

71007

ClovaBond Universal Bonding Primer

Colors: Transparent green

FOR SHOP USE ONLY.

ClovaBond Universal Bonding Primer is a 100%

Acrylic, solvent based, wash coating formulated

to provide adhesion to galvanized steel, aluminum,

stainless steel and other substrates. This is a

thin film wash primer exhibiting excellent topcoat

compatibility with architectural, industrial and

maintenance type coatings. This product will

replace Chromate containing vinyl wash primers

for most non corrosive applications. This Univer-

sal Bonding Primer is a single pack primer used

for ducting, piping, galvanized steel, aluminum

paneling, copper pipe, stainless steel or other

non-ferrous metals. Also good for porcelain,

glass, ceramic tile or fiberglass substrates.

Metal Primers

MP-6


3.3.13

71044, 71047 & 71046

High Solids Non-Lifting Primer

Colors: Grey, Yellow, Red

A high performance, universal anti-corrosive

primer exhibiting excellent adhesion, hardness

and durability and corrosion resistance that will

surpass in excess of 1000 hours cyclic corro-

sion testing using ASTM D 5894 testing meth-

ods. High solids content permits extremely

economical use at low film builds while at the

same time enabling higher film builds to cover

rougher steel surfaces when necessary. Form-

lated for fast dry times with exceptional low

temperature curing even during winter condi-

tions, this primer also performs well as a barrier

primer over aged alkyd coatings. Meets the

requirement of CISC/CPMA Std 1-73A and MPI

76.

MPI #76 Approved

VOCCompliant

US EPA AIM Rule

Approved

82331

Corroseal Rust Converting Primer

Corroseal® is a water based rust converter

combined with a non pigmented high quality

latex metal primer. The converter segments

turn rust into a barrier layer of black non rust-

ing magnetite. The primer acts as a bonding

agent for oil-based intermediate and finish

coatings of epoxy, enamel, acrylic, polyurethane

and moisture-cured urethane, and with water

based coatings not subject to tannin staining.

Water based coatings may require an oil based

stain blocker as an intermediate application.

Corroseal® is non flammable and non- corro-

sive. Corroseal® is recommended for use on

rusted or partially rusted steel surfaces as a

converter / paint primer, and as an etch primer

on aged tight paint of any color, and as a sealer

on non ferrous metals such as some aluminum,

copper, and brass. Protects against future

rusting. Not recommended for outside hull

underwater applications. Can be used on

welds. Eliminates need to mechanically blast to

white metal in many instances.

VOCCompliant

US EPA AIM Rule

Metal Primers

MP-7


3.3.13

83021

ClovaPrime 21

Heavy duty, high-performance VOC compliant

epoxy primer

Colors: Grey, Red

A rust inhibitive primer for steel surfaces where

excellent weathering, chemical and corrosion

resistance is required. This high performance

primer can be topcoated with a variety of Rodda

/ Cloverdale finishes including two component

urethane, acrylic modified urethane, epoxy

enamel and alkyd enamel.

A heavy duty high performance VOC compliant

epoxy primer that provides excellent corrosion

resistance over blasted or power tool cleaned

steel. ClovaPrime 21 has a low gloss finish with

good flexibility on aging. ClovaPrime 21 is a two

component product with 83021 A and converter

83021 B supplied in separate containers.

MPI #101 Approved

Please refer to the Technical Data Sheet for ClovaPrime 21 performance testing criteria.

Approved

VOCCompliant

US EPA AIM Rule

IFC-1

Industrial Finish Coats


When selecting a finish coat, it is very important

to consider both the coating application and the

service environment the finished item will be

placed in.

Enamels

Enamels are single-component coatings that

can be solvent-based or water-based.

• If a quick return-to-service is essential to your project, choose a quick drying coating.

• For projects where a more conventional dry time is acceptable, you gain added durability and performance with slower drying, higher- solids enamel products.

• When the application method must be by brush or roller, the slower drying enamels will give a better finish.

• In a non-corrosive environment where appearance is very important, enamels can be very easy to touch-up.

• Enamels are very user-friendly: no multiple components and exotic thinners need to be mixed together. No working pot-life times are a concern.


3.3.13

IFC-2

Industrial Finish CoatsRodda / Cloverdale Industrial Finish Guide

Product DescriptionMulti Master DTMWater Based, Low VOC, Cross-linkingAcrylic Enamel

528901 & 548901

Gen

eric

Typ

e

Solv

ent T

ype

Fini

sh /

She

en

Dry

to to

uch*

Dry

to h

andl

e*

Dry

to re

coat

*

Colo

rs

Clea

n-up

Inte

rior /

Exte

rior

Exte

rior g

loss

rete

ntio

nEx

terio

r col

orre

tent

ion

Woo

d

Met

al

Met

al s

idin

gCo

ncre

te /

Mas

onry

Cove

rage

/ga

llon

Floo

rs

Viny

l /Fi

berg

lass

Product Details Product Use

All Purpose Equipment EnamelHigh-Gloss, Interior, Exterior

758101

Fast Dry IndustrialEnamel PolyurethaneAlkyd Fast Dry Polyurethane

757001

Silicone Alkyd EnamelHigh-Gloss, Heat and Weather Resistance

758801

Silic

one

alky

dM

ediu

m D

ry O

il

Solv

ent

Solv

ent

Glo

ssSa

tinSe

mi-g

loss

Solv

ent

Wat

er

Glo

ssG

loss

4 ho

urs

1-2

hour

s

14-1

6 ho

urs

Full

rang

eFu

ll ra

nge

Full

rang

eFu

ll ra

nge

Wat

erM

iner

al S

pirit

sM

iner

al S

pirit

sSy

nthe

ticRe

duce

r

Yes

2 ho

urs

2 ho

urs

4-6

hour

s

4 ho

urs

4 ho

urs

Less

than

6 h

rsor

ove

r 24

hour

s24

hou

rs

Yes

Yes

Yes

Exce

llent

Exce

llent

Yes

Yes

(inte

rior o

nly)

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

N/A

Yes

Test

Yes

Yes

No

No

No

Yes

No

325

sq. f

t.**

475

sq. f

t.**

480

sq. f

t.**

480

sq. f

t.**

* Dry times will vary depending on air and surface temperature, humidity and wet film thickness. Stated times assume 77º and 50% relative humidity during and following application.** Theoretical coverage per gallon, per coat, when applied to a smooth surface at recommended film thickness. No allowance is made for material loss during mixing or application. When calculating amount of product needed, a good generic rule of thumb is to allow for surface irregularities, surface absorption, and losses during mixing and application.

EcoLogic DTMWaterborne DTM, Acrylic Enamel

704 Series

Quick Dry Equipment EnamelAcrylic Modified Alkyd

758001


Glo

ss

Wat

er

Full

rang

e

Wat

er

Yes

1 ho

ur

Exce

llent

Exce

llent

Yes

Yes

Yes

Yes

Test No

325

sq. f

t.**

6 ho

urs

12 h

ours

Exce

llent

Exce

llent

Exce

llent

Exce

llent

Fast

dry

oil

Solv

ent

Sem

i glo

ssG

loss

1 1/

2 ho

urs

<2 h

our o

r ov

er 2

4 ho

urs

Full

rang

e

Synt

hetic

redu

cer

Goo

d

10-2

0 m

ins

Yes

Goo

d

No

Yes

Yes

No

Test

No

325s

q. ft

.**

Exce

llent

Exce

llent

Wat

erbo

rne

Acry

lic

4 ho

urs

1 ho

ur

Wat

erbo

rne

Acry

licPo

lyura

than

e

3.3.13

IFC-3

Industrial Finish CoatsRodda / Cloverdale Industrial Finish Guide

Product DescriptionSelf Priming Maintenance &Marine EnamelSelf Priming, Urethane Alkyd

74903

Gen

eric

Typ

e

Solv

ent T

ype

Fini

sh /

She

en

Dry

to to

uch*

Dry

to h

andl

e*

Dry

to re

coat

*

Colo

rs

Clea

n-up

Inte

rior /

Exte

rior

Exte

rior g

loss

rete

ntio

nEx

terio

r col

orre

tent

ion

Woo

d

Met

al

Met

al s

idin

gCo

ncre

te /

Mas

onry

Cove

rage

/ga

llon

Floo

rs

Viny

l /Fi

berg

lass


Synt

hetic

Redu

cer

Hig

h gl

oss

Alky

d Re

sins

Full

rang

e

Min

eral

Spi

rits

Yes

1 ho

ur

Exce

llent

Exce

llent

Yes

Yes

Yes

Yes

Test No

320

sq. f

t.**

* Dry times will vary depending on air and surface temperature, humidity and wet film thickness. Stated times assume 77º and 50% relative humidity during and following application.** Theoretical coverage per gallon, per coat, when applied to a smooth surface at recommended film thickness. No allowance is made for material loss during mixing or application. When calculating amount of product needed, a good generic rule of thumb is to allow for surface irregularities, surface absorption, and losses during mixing and application.

Hi Solids Equipment EnamelHigh Solids, Pigmented, Synthetic Alkyd OilModified Resin Coating

758501


Full

rang

eFu

ll ra

nge

Yes

2 ho

urs

Exce

llent

Exce

llent

Yes

Yes

Yes

Yes

Test No

12 h

ours

325

sq. f

t.**

8 ho

urs

Synt

hetic

Alk

ydUr

etha

ne A

lkyd

12 h

r. m

in.

8 ho

urs

Synt

hetic

Redu

cer

Hig

h gl

oss

Synt

hetic

Redu

cer

Industrial Enamel

74 Series Min

eral

Spi

rits

Hig

h gl

oss

2 ho

urs

5 ho

urs

2 hr

. min

.

Full

rang

e

Min

eral

Spi

rits

Yes

Yes

Yes

Yes

Yes

Test No

480

sq. f

t.**

3.3.13

Exce

llent

Exce

llent

548901/528901

Multi Master DTM - Semi Gloss /Satin

Interior / Exterior Pigmented, Single Component, Waterborne, Crosslinked, 100% Acrylic Latex Direct to Metal DTM

Colors: Full range

This is a direct to metal crosslinking latex that

can be applied by brush, roller, or spray to bare,

primed, or previously painted substrates. This

product has excellent adhesion, gloss and color

retention properties combined with low VOC, low

odor and is non-flammable. It can be used as a

general purpose maintenance coating on tank

exteriors, transmission towers, microwave

towers, metal buildings, structural steel and

other metal and masonry surfaces. Multi Master

DTM is flash rust resistant and fast drying and

bonds well making it an ideal coating to apply to

properly prepared metal siding. Multi Master

DTM contains a fungicide/mildewcide for

protection against the growth of mold & mildew

on the surface of the paint.

Semi-gloss MPI #153, 163 Approved


IFC-4

100%Acrylic

Approved

VOCCompliant

US ERA AIM Rule

VOCCompliant

US ERA AIM RuleApproved


70401

EcoLogic DTM Enamel

Interior / Exterior Water borne DTM gloss enamel

Colors: White and custom colors

This is a direct to metal gloss enamel primarily

for spray application to bare, primed or previ-

ously painted substrates. This products has

excellent adhesion, gloss, and color retention

properties combined with low VOC, low odor,

and is non-flammable. Ideal use on tanks, waste

bins, equipment, gas cylinders, machinery in

pulp mills, process and plants, saw mills, OEM

and light industrial application.


3.3.13

100%Acrylic

IFC-5


757001

Fast Dry Industrial Enamel

Interior / Exterior Pigmented Urethane Modified Alkyd Enamel Paint

Colors: Full range

A fast dry interior, exterior single component

polyurethane modified alkyd enamel designed

to give a tough durable gloss finish. It can be

used on metal doors and frames, railings, metal

buildings, structural steel , tanks, wood, interior

above grade floors. (Note: Not to be used on

surfaces where vehicles are parked).

Fast Dry Industrial Enamel has good gloss and

color retention and is VOC compliant and can

mbe brushed, rolled or sprayed.


Approved

VOCCompliant

US EPA AIM Rule

758101

All Purpose Equipment Enamel

Interior / Exterior Pigminted Alkyd Resin Enamel

Colors: Full range, Safety Colors: Red, Yellow, Orange, Blue and Green

All Purpose Equipment Enamel is a highly

pigmented medium oil alkyd enamel for use

anywhere a hard, durable, enamel finish is

desired. It is effective on surfaces such as

structural steel, beams, trusses, metal doors,

metal sash, metal trim, lockers, handrails, stairs

and all types of machinery. It can be used both

interior and exterior and is a high gloss. Often

used in institutional maintenance applications

where a tough cleanable surface is needed.

MPI #9 Approved

3.3.13

VOCCompliant

US EPA AIM Rule

OEM & Industrialmaintenance catalog

758801

Powerkote Silicone Alkyd

Pigmented modified silicone resin long oil synthetic alkyd enamel metal paint, excellent gloss and color retention

Colors: Full range

Tough, resilient interior / exterior long lasting

coating designed for maximum exterior durabil-

ity with superior gloss and color retention.

Designed for protection of non-submerged

metal surfaces. It is ideally suited for protection

of steel storage tanks, structural steel, railings,

pumps, equipment, awnings, overhangs, etc.

This enamel does well with the thermal shock

often experienced by coatings applied to exteri-

ors of steel storage tanks, towers, and struc-

tural steel. Rodda Silicone Alkyd will remain

resilient longer then conventional oil base

enamel upon exterior exposure to sunlight.

MPI #21 Approved


IFC-6

Approved

VOCCompliant

US EPA AIM Rule

758001

Quick Drying Equipment Enamel

Quick Drying, Air Drying, Pigmented, Acrylic-Modified Resin Coating for Metals

Colors: Full range, Stock colors, Safety Red 82, Safety Blue 83 Safety Yellow 84, Safety Green 85, Safety Orange 86, Black 99

FOR SHOP USE ONLY.

A high gloss acrylic modified alkyd enamel for

industrial use only. Provides outstanding protec-

tion when used on properly primed or prepared

metal. Excellent performance and durability on

industrial, agricultural, oil field, construction,

highway equipment, and machinery. This spray

only paint will dry to touch in 1 hour and it has

good gloss and color retention.

MPI #96 Approved

Approved

3.3.13

OEM & IndustrialMaintenance catalog

IFC-7

74903

Self-Priming Maintenance & Marine Enamel

Premium quality urethane modified VOC compli-

ant alkyd gloss enamel for use as a protective

maintenance rust inhibitive direct-to-metal

(DTM) finish coat for use on metal and struc-

tural components.

Colors: Full range

Ideally suited for brush, roll or spray application

to pipes, tank exteriors, machinery, lamp poles,

guard railings, marine application, containers,

tote tanks, bins, metal signs as well as other

exterior or interior applications. For use as a

protective maintenance rust inhibitive direct-to-

metal (DTM) finish coat for use on metal and

structural components. Quick dry and all

season application combined with good weather

resistance.

MPI #9 Approved


758501

High Solids Gloss Equipment Enamel

A high quality,moderately fast drying gloss

enamel that provides a full gloss with excellent

impact resistance and weatherability. Available

in a wide range of stock and custom colors.

Colors: Full range

This product is designed to meet the stringent

durability requirements of an industrial environ-

ment. Ease of application makes this product

ideal for use on industrial machinery, equip-

ment, oil and gas process equipment and

structural steel, beams, trusses, metal doors

and trim, lockers and handrails. Not recom-

mended for immersion service or high corrosion

areas. Can be used interior or exterior and is a

high gloss.

3.3.13

VOCCompliant

US EPA AIM Rule

Approved

VOCCompliant

US EPA AIM Rule


Epoxy / Urethane Finish Coats/Water Based Epoxy

Epoxies /Urethanes/Water Based Epoxy

Choose from a variety of epoxies and urethanes

designed for a wide range of applications requiring

excellent durability and performance, including

food processing plants, water treatment plants,

power-generating plants, marine service and much

more. For more information, please refer to our

data pages, call 1-800-452-2315 or visit our

website at www.roddapaint.com.

Epoxies and Urethanes:

Epoxies and Urethanes are two-part coatings

consisting of an A (Base) and B (activator)

component. Epoxies are available in both

water-based and solvent-based versions; most

urethanes are solvent-based. These coatings

provide superior film hardness and chemical

resistance as compared to enamels.

• Epoxies are resistant to many chemical compounds and are much more moisture tolerant than enamel products.

• Epoxies are primarily for interior applications as they tend to lose color and gloss when exposed to the sun light.

• Urethanes are frequently used as a finish coat over a primer or intermediate coat of epoxy and have excellent chemical resistance and color and gloss retention.

• An epoxy / urethane system provides the best combination of chemical resistance and exterior weatherability.

“Pot-Life” of two-part coatings.

After mixing the A and B components

together, these products have a limited pot

life - the period during which they must be

applied to the surface. Material that is

mixed but not applied during the specified

pot life period must not be used. Freshly

catalyzed coating should never be added to

coating nearing the end of it’s pot-life, as

this will shorten batch pot-life greatly.

EU-13.3.13


EU-2

Waterborne Epoxy / Epoxy / Urethane Finish CoatsRodda / Cloverdale Industrial Epoxy Guide

Cove

rage

/ga

llon

320

sq. f

t.**

Product DescriptionEcoLogic Waterborne EpoxyWater Based, Low VOC, Low odor,non- flammabilityWhite and custom colors

70503

Gen

eric

Typ

e

Solv

ent T

ype

Fini

sh /

She

en

Dry

to to

uch*

Dry

to h

andl

e*

Dry

to re

coat

*

Colo

rs

Clea

n-up

Inte

rior /

Exte

rior

Exte

rior g

loss

rete

ntio

nEx

terio

r col

orre

tent

ion

Woo

d

Met

al

Met

al s

idin

gCo

ncre

te /

Mas

onry

Floo

rs

Viny

l /Fi

berg

lass


Wat

er-b

orne

acry

lic

Satin

/SG

/G

Wat

er

Whi

te a

ndcu

stom

col

ors

Soap

and

wat

er

Yes

1 ho

ur

6 ho

urs

4-6

hour

s

Exce

llent

Goo

d

Yes

Yes

No

Yes

Test No

* Dry times will vary depending on air and surface temperature, humidity and wet film thickness. Stated times assume 77º and 50% relative humidity during and following application.**Theoretical coverage per gallon, per coat, when applied to a smooth surface at recommended film thickness. No allowance is made for material loss during mixing or application. When calculating amount of product needed, a good generic rule of thumb is to allow for surface irregularities, surface absorption, and losses during mixing and application.

3.3.13

400

sq. f

t**

480

sq. f

t.**Armour Shield XP

High-Gloss, Hi-Build, Low VOC, Cross-linking Acrylic Urethane

837/839

1 ho

urs

12 h

our

Full

rang

e

MEK

Yes

No

Yes

Yes

Yes

Test

Alip

hatre

Acr

ylic

Uret

hane

Solv

ent

Glo

ss

6 ho

urs

15 m

in to

72

hr

Full

rang

e

C-76

0-1

2 ho

urs

Yes

No

Yes

Yes

Yes

No

Exce

llent

Exce

llent

Yes

No

Exce

llent

Exce

llent

225

sq. f

t.**

250

sq. f

t.**

250

sq. f

t.**

250

sq. f

t.**

ClovaMasticLow gloss

83110

Ropon High SolidsHigh-Gloss, Hi-Build

759401

Chem

ical

ly Cu

red

Epox

y

Solv

ent

Solv

ent

Low

- G

loss

Glo

ss

2 ho

urs

16 h

ours

Off W

hite

Full

rang

e

C-25

Thi

nner

Ropo

n th

inne

r

Goo

d

4 ho

urs

2 ho

urs

4 ho

urs

4 ho

urs

Yes

Yes

Goo

d

Goo

dG

ood

Yes

(inte

rior o

nly)

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Test

No

No

Polycoat IIHigh-Gloss, Acrylic UrethaneShop use only.

759101

ClovaCoat 300High-Gloss, High-Build, High Performance,Polyamide Epoxy

833 Series

ClovaGuardLow-Gloss, Hi-Build, High Performance,Polyamide Epoxy

8315 Series

Solv

ent

Hig

h-G

loss

24-4

8 ho

urs

8 hr

s - 7

day

s

Goo

d

C-70

thin

ner

8-12

hou

rs

Goo

d

Yes

No

Yes

Yes

Yes

Test

Solv

ent

Low

-Glo

ss

4-12

hou

rs

Full

rang

e

C-70

thin

ner

1-2

hour

s

Yes

No

Yes

Yes

Yes

Test

Acry

lic U

reth

ane

Solv

ent

Glo

ss

30-6

0 m

in

Yes

Full

rang

e

Yes

4-12

hou

rs

Goo

d

Goo

d

Poly

amid

eEp

oxy

Poly

amid

eEp

oxy

Poly

amid

eEp

oxy


EU-3

Approved

70503

EcoLogic Waterborne Epoxy

Two component acrylic waterborne epoxy

Gloss, Semi-gloss, Satin/Eggshell

Colors: Full range

Two part Acrylic Epoxy with a performance

profile approaching that of conventional

solvent-borne epoxies. This product features

excellent gloss retention, yellowing resistance,

low odor and low VOC’s combined with good

chemical , stain and solvent resistance. It also

has excellent scrub and mar resistance. As an

interior/exterior high performance coating for

vertical drywall, concrete, masonry, wood,

primed metal, some plastics and composite

materials. Ideally suited for use in institutions,

schools, hospitals, etc. Catalyze with 70503 B

for High Gloss, 70504 B for Semi Gloss and

70505 B for Satin/Eggshell. Ideal for locker

areas, lavatories or other areas which may be

subjected to germicidal cleaning.

MPI #115 Approved

Epoxy Finish Coats

83110

ClovaMastic

Hi-build, low temperature cure epoxy, surface tolerant mastic coating

Colors: Off-white, black and clear base

For use on storage tanks, oil and gas equipment,

structural steel, pulp and paper mills, sewage

treatment plants, marine and other heavy industrial

areas. For application during hotter weather when

longer open times are required, summer grade

activator 83110BX can be used.

This low temperature cure epoxy is a high perfor-

mance, surface tolerant mastic coating. Ideal for

cool weather application. This product cures at

temperatures as low as 0 degrees F. Can be applied

directly to steel where abrasive blasting is not

practical. It has improved surface wetting capabili-

ties providing superior surface tolerance and adhe-

sion. The high solids provides for ease of film build

when used as a one-coat maintenance finish coat

over Zinc rich primers.

MPI #98 Approved

Please refer to the Technical Data Sheet for ClovaMastic performance testing criteria.

Approved

VOCCompliant

US EPA AIM Rule

VOCCompliant

US EPA AIM Rule

3.3.13


EU-4

Epoxy Finish Coats

759401

Ropon High Solids Epoxy

Interior pigmented chemically cured two-component high gloss enamel epoxy

Colors: White and pastel colors

A high solids, high-build chemically cured epoxy

coating. Intermediate/finish coat for use on

properly primed steel, masonry, and non-ferrous

metal surfaces. High build formulation offers

ease of application to reduce application costs.

Highly resistant to abrasion and chemicals. May

be used direct to properly prepared bare steel.

MPI #98

Approved

833 Series

ClovaCoat 300

High-build, high-gloss epoxy coating

Colors: Full range

For use as part of a primer / topcoat system on

tank exteriors or structural equipment for

protection from chemical splash or spill. Also

recommended for use on block or plaster board

walls or on concrete floors such as warehouses,

factories, carports and garages where a chemi-

cal resistant high gloss finish is desired.

A high build, high performance, gloss finish with

excellent abrasion and stain resistance. This

coating is resistant to a broad range of corro-

sive chemicals and solvents. ClovaCoat 300 is a

two component product with base 833 Series A

and converter 83300 B supplied in separate

containers.

MPI #77,98 Approved

Please refer to the Technical Data Sheet for ClovaCoat 300 performance testing criteria.

Approved

VOCCompliant

US EPA AIM Rule

3.3.13

VOCCompliant

US EPA AIM Rule

EU-5

Epoxy Finish Coats


3.3.13

8315 Series

ClovaGuard

High-build, low gloss epoxy coating

Colors: Full range

ClovaGuard can be used as a primer or intermediate

coat beneath ClovaCoat or as an intermediate coat

beneath ArmourShield where superior performance

is required. A high performance one coat system

where low gloss is acceptable or where chalking in

sunlight is not a concern. For use on storage tanks,

oil and gas equipment and machinery, structural

steel in pulp and paper mills, sewage treatment

plants, marine and other heavy industrial areas.

ClovaGuard is a two component high build, high

performance, polyamide coating recommended for

severe exposures. It is an abrasion and chemical

resistant coating with a low gloss appearance.

MPI #108

Please refer to the Technical Data Sheet for ClovaCoat 300 performance testing criteria.

Approved

VOCCompliant

US EPA AIM Rule

Urethane Finish Coats


EU-63.3.13

837 & 839 Series

Armour Shield® XP

High-gloss, high-build alphatic cross-linking urethane

Colors: Full range

For application to commercial transportation,

aircraft, farm machinery, oil field drilling and

service equipment, industrial and process equip-

ment, exteriors of storage tanks and structural

steel. Armour Shield® is also used as a chemical

resistant, gloss retentive finish over intermediate

epoxy and zinc rich primer systems.

The Armour Shield® XP line of coatings are tightly

crosslinked interpenetrating polymer networks of

acrylic and polyester urethanes. Virtually HAPs free

(less than 1%), high performance , VOC compliant

aliphatic urethanes that provide superior gloss and

color retention, excellent chemical resistance,

outstanding abrasion resistance and a very high

gloss (wet look) finish.They are available in white

and colored bases permitting a match to most colors.


Approved

VOCCompliant

US EPA AIM Rule

759101

Polycoat II

Interior / Exterior, a pigmented acrylic alphatic

Colors: Full range

THIS PRODUCT FOR SHOP USE ONLY. Polyure-

thane, two component high gloss coating that

combines the appearance of a high quality

enamel and the performance of a chemically

cured coating. Polycoat II has excellent gloss

and color retention, abrasion resistance, impact

resistance, and chemical resistance and can be

used on structural steel, beams, trusses, indus-

trial equipment and all types of machinery.

Polycoat II protects metal surfaces in marine

environments, chemical plants and other corro-

sive areas.

MPI #78 Approved

Approved


SP-1

Surface Preparation StandardsYou should always designate the degree of surface preparation required for the materials you are using. The basic standards for preparing metal substrates are a joint effort between the Society for Protective Coatings (SSPC) and the National Association of Corrosion Engineers International (NACE).

SSPC-SP1 Solvent CleaningRemoval of all visible oil, grease, soil, drawing and cutting compounds, and other soluble contaminants from steel surfaces with solvent, vapor, cleaning compound, alkali, emulsifying agent, or steam.

SSPC-SP2 Hand Tool CleaningRemoves all loose mill scale, loose rust, loose paint, and other loose detrimental foreign matter by hand chipping, scraping, sanding, and wire brushing.

SSPC-SP3 Power Tool CleaningRemoves all loose mill scale, loose rust, loose paint, and other loose detrimental foreign matter by power wire brushing, power sanding, power grinding, power tool chipping, and power tool descaling.

SSPC-SP5 / NACE 1 White Metal Blast Clean-ingWhen viewed without magnification, the surface shall be free of all visible oil, grease, dust, dirt, mill scale, rust, coating, oxides, corrosion products and other foreign matter.

SSPC-SP6 / NACE 3 Commercial Blast Clean-ingWhen viewed without magnification, the surface shall be free of all visible oil, grease, dust, dirt, mill scale, rust, coating, oxides, corrosion products and other foreign matter of at least 66-2/3% of unit area, which shall be a square 3 in. x 3 in. (9 sq. in.). Light shadows, slight streaks, or minor discolor-ations caused by stains of rust, stains of mill scale, or stains of previously applied coating in less than 33-1/3% of the unit area is acceptable.

SSPC-SP7 / NACE 4 Brush-Off Blast Clean-ing

mill scale, loose rust, and loose coating. Tightly adherent mill scale, rust, and coating may remain on the surface. Mill scale, rust, and coating are consid-ered tightly adherent if they cannot be removed by lifting with a dull putty knife.

SSPC-SP10 / NACE 2 Near-White Blast Clean-ingWhen viewed without magnification shall be free of all visible oil, grease, dust, dirt, mill scale, rust, coating, oxides, corrosion products and other foreign matter of at least 95% of each unit area. Staining shall be limited to no more than 5 percent of each unit area, and may consist of light shadows, slight streaks, or minor discolorations caused by stains of rust, stains of mill scale, or stains of previously applied coatings. Unit area shall be approximately 3 in. x 3 in. (9 sq. in.).

SSPC-SP11 Power Tool Cleaning to Bare MetalWhen viewed without magnification, the surface shall be free of all visible oil, grease, dirt, dust, mill scale, rust, paint, oxides, corrosion products, and other foreign matter. Slight residues of rust and paint may be left in the lower portion of pits if the original surface is pitted. The surface profile shall not be less than 1 mil (25 microns).

SSPC-SP12 / NACE 5 Surface Preparation and Cleaning of Steel and Other Hard Materi-als by High- and Ultra High- Pressure Water Jetting Prior to re-coatingThis standard requires water jetting at high- or ultra high-pressure to prepare a surface for re coating using pressure above 10,000 psi. Water jetting will not produce a profile; rather, it exposes the original abrasive-blasted surface profile. Water jetting shall be performed to meet four conditions: WJ-1, WJ-2, WJ-3, and WJ-4, and a minimum acceptable surface shall have all loose rust, loose mill scale, and loose coatings uniformly removed.

3.3.13


SP-2

Surface Preparation Standards (continued)

SSPC-SP13 / NACE 6 Surface Preparation of ConcreteProvides requirements for surface preparation of concrete by mechanical, chemical, or thermal meth-ods prior to the application of bonded protective coating or lining systems.

SSPC-SP14 / NACE 8 Industrial Blast Clean-ingRemoval of all visible oil, grease, dust and dirt, when viewed without magnification. Traces of tightly adherent mil scale, rust, and coating residues are permitted to remain on 10% of each unit area of the surface if they are evenly distributed. Shadows, streaks, and discoloration caused by stains of rust, stains of mill scale, and stains of previously applied coating may be present on the remainder of the surface.

3.3.13


Manufacturing and DistributionRodda Paint and Cloverdale Paint own and operate 5 regional manufacturing facilities and distribute our coatings through over 100 company owned wholesale outlets. What this means to you is that Rodda and Cloverdale’s industrial and protective coatings are readily available and easy to acquire.

Research and Development / Quality Con-trolContinued growth and success requires a commitment to keeping abreast with and using the industries latest technologies to develop new and improved coatings. Rodda and Cloverdale employs world class chemist and technicians to develop leading products and coatings systems.

Global OrganizationsRodda and Cloverdale participate in several coatings associations including NOVA, an organization providing a framework within which leading global coatings manufacturers exchange technology and expertise in maintaining leading edge product development positioning.

Rodda and Cloverdale’s industrial plants are ISO Certi�ed and committed to maintaining a standard of excellence, continuous improvement and consistency in quality performance.

The Industrial and Protective Coatings Division of Rodda Paint Co.Rodda Paint and Cloverdale Paint manufacture and distribute high performance protective coatings for use in the oil and gas, mining, forestry, OEM markets and other industrial environments. We are the U.S. and Canada’s largest, privately owned coatings manufacturers and one of North America’s leading regional producers. The cornerstones of Rodda and Cloverdale’s success has been our sta� of sales and service professionals and our focus on the development of high performance, corrosion-resistant protective and maintenance industrial coatings.

3.3.13

Corporate O�ce 6107 N. Marine Dr Portland, OR 97203 Phone: 800-452-2315

Alaska Anchorage AK 4970 Fairbanks St Anchorage, AK 99503 Phone: 907-562-2590 Wasilla WA42 1051 E Bogard Rd Unit 16 Wasilla, AK 99654 Phone: 907-357-7401

Idaho Coeur d’Alene CD45 6960 N Government Way Dalton Gardens, ID 83815 Phone: 208-772-6818 Idaho Falls IF68 1530 Hollipark Dr Ste C Idaho Falls, ID 83401 Phone: 208-542-2900

Oregon Albany AB16 950 Geary St. SE Albany, OR 97322 Phone: 541-926-3787 Bend BN48 63007 Layton Ave Bend, OR 97701 Phone: 541-330-0370 Cedar Hills CH04 10120 SW Park Way Portland, OR 97225 Phone: 503-292-1515 Clackamas CL30 10309 SE 82nd Portland, OR 97086 Phone: 503-788-0797 Commercial Wallcovering Portland Eastside Store Jan Barney & Susan Valdez Phone: 800-214-9255 Delta Oaks DO25 1014 Green Acres Rd Eugene, OR 97408 Phone: 541-343-7717 Portland Eastside ES02 321 SE Taylor Portland, OR 97214 Phone: 503-233-6016 Glisan GL03 11980 NE Glisan Portland, OR 97220 Phone: 503-255-3224 Grants Pass GP64 409 NE F St. Grants Pass, OR 97526 Phone: 541-474-0029 Gresham GR12 318 NW Eastman Pkwy Gresham, OR 97030 Phone: 503-661-0400 Hillsboro HB32 701 SW Armco Ave Hillsboro, OR 97213 Phone: 503-648-6857 McMinnville MM34 436 Highway NE 99 W McMinnville, OR 97128 Phone: 503-472-7383 Medford MD05 1211 Court Street Medford, OR 97501 Phone: 541-772-9711 Oregon City OC13 1900 McLoughlin #22B Oregon City, OR 97045 Phone: 503-655-7981 Progress PR14 8614 SW Hall Blvd Beaverton, OR 97008 Phone: 503-644-6188 Salem SA15 3589 Fairview Industrial Dr Salem, OR 97302 Phone: 503-585-7900 Tualatin TU17 8365 SW Tonka Tualatin, OR 97062 Phone: 503-692-6699 West Eugene WE11 2477 W 11th Eugene, OR 97402 Phone: 541-344-2520

Montana Kalispell KS71 2165 US Hwy 2 East Kalispell, MT 59901 Phone: 406-407-7840 Missoula MS69 3100 Brooks St Missoula, MT 59801 Phone: 406-721-5800

Washington Bellevue BE19 1900 132nd Ave NE Bellevue, WA 98005 Phone: 425-451-1666 Bellingham BH51 747 Ohio Street Bellingham, WA 98225 Phone: 360-738-6878 Chehalis CE43 1050 D NW Maryland Ave. Chehalis, WA 98532 Phone: 360-748-3581 Everett EV35 7825 Evergreen Way Everett, WA 98203 Phone: 425-347-4989 Fourth South FS18 3838 4th Ave S Seattle, WA 98134 Phone: 206-652-0445 Gig Harbor GH62 4909 33rd Ave Ct Gig Harbor, WA 98335 Phone: 253-857-2061 Issaquah IS31 1690 NW Mall St. Issaquah, WA 98027 Phone: 425-392-7511 Kennewick KW65 501 N. Quay St Ste 108 Kennewick, WA 99336 Phone: 509-735-2702 Kent KT24 25615 104th Ave SE Kent, WA 98031 Phone: 253-859-5115 Lacey LA33 4520 Lacey Blvd SE Ste 10 Lacey, WA 98503 Phone: 360-459-0006 Longview LV55 541 California Way Longview, WA 98632 Phone: 360-423-4990 Lynnwood LN20 4601 200th SW B Lynnwood, WA 98036 Phone: 425-672-0231 Puyallup PY23 4621 S. Meridian Puyallup, WA 98373 Phone: 253-840-2111 Redmond RD26 17836 NE 65th St. Redmond, WA 98052 Phone: 425-881-5583 Sequim SQ44 271 South 7th #22 Sequim, WA 98382 Phone: 360-683-6793 Silverdale SD06 3276 NW Plaza Rd #107 Silverdale, WA 98383 Phone: 360-698-6792 Skagit SG63 1043 Goldenrod Rd #102 Burlington, WA 98233 Phone: 360-757-0194 Spokane SK09 6818 E Sprague Ave Spokane Valley, WA 99212 Phone: 509-533-9838 Spokane North SN46 8117 North Division Spokane, WA 99208 Phone: 509-465-4950 Stoneway SW22 3633 Stone Way N Seattle, WA 98103 Phone: 206-547-7405 Tacoma TS27 2510 S. 84th Ste 32C Lakewood, WA 98499 Phone: 253-472-7286 Walla Walla WW72 705 W Rose Ste C Walla Walla, WA 99362 Phone: 509-956-3070 Wenatchee WN67 1544 N Wenatchee Ave #300 Wenatchee, WA 98801 Phone: 509-664-0137 Yakima YK70 925 S 1st Street Ste 100 Yakima, WA 98901 Phone: 509-654-7272


w w w.roddapaint .com

3.3.13

OEM & Industrial Maintenance Catalog

Documents

Transcript of OEM & Industrial Maintenance Catalog