˜exible leidingen Swivel joints - Swivel joints made of stainless steel up to working pressure...

Click here to load reader

  • date post

    27-Jan-2021
  • Category

    Documents

  • view

    8
  • download

    0

Embed Size (px)

Transcript of ˜exible leidingen Swivel joints - Swivel joints made of stainless steel up to working pressure...

  • HANWEL NEDERLAND

    flexible leidingen

    Swivel joints

  • Designs are subject to change without notice 12/2004

    1

    HANWEL is your qualified partner in the field of flexible piping systems. The product range of HANWEL B.V. includes • Swivel Joints • Rotary Joints • Complete prefinished swivel joint systems. Flexible piping systems are used in various industrial sectors, for example.: ���� chemical industry ���� petrochemical industry ���� steel and iron industry ���� food industry ���� paper and wood industry ���� waste water treatment plants, water treatment ���� off-Shore-Industry ���� dredger and crane industry ���� general and special engineering WELFLEX - Swivel joints are used in the following cases:

    • movable piping systems are needed for the transport of liquid and gaseous medias

    • liquid and gaseous medias must be induced from fixed plant components into rotating plant components

    • hose systems must be exculpated from high bending and torsion stresses

    Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000 [email protected] www.hanwel.com

  • Designs are subject to change without notice 12/2004

    2

    Styles

    WELFLEX - Swivel joints are available in 8 styles. By the means of capable combinations of the styles nearly any areal movement of a piping system can be realized.

    Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000 [email protected] www.hanwel.com

  • Designs are subject to change without notice 12/2004

    3

    The Welflex programma covers the following type series:

    W-Swivel Joint

    • welding connection • 2 ball races • radial sealing principle • styles 10 to 31 • DN25 bis DN200

    (bigger on request) • up to 420 bar • up to 250° C • materials: St52-3,1.4571 • seal materials: NBR,

    Viton, PTFE, PU

    LW-Swivel Joint

    • welding connection • 1 ball race • radial sealing principle • styles 10 bis 31 • DN25 bis DN200

    (bigger on request) • up to 100 bar • up to 250° C • materials: St52-3,1.4571 • seal materials: NBR,

    Viton, PTFE, PU

    T-Swivel Joint

    • internal thread G ½ to G2 • radial

    sealing principle • styles 10, 11, 12 • up to 420 bar • up to 250° C • materials: 42CrMo4,

    1.4571 • seal materials:

    NBR, Viton, PTFE, PU

    Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000 [email protected] www.hanwel.com

  • Designs are subject to change without notice 12/2004

    4

    Special Swivel Joints

    LA-Swivel Joint

    • welding connection • 3-part cabinet • radial sealing principle • double safety sealing • styles 10 bis 31 • DN25 bis DN150 (bigger on request) • up to 40 bar • up to 250° C • materials: 26CrMo4, 1.4571 • seal materials: NBR, Viton, PTFE, PU • free clearance volume execution by additional axial sealing

    • HT-Swivel Joint high temperature application up to 400° C and more • HP-Swivel Joint high pressure application up to 1000 bar • H-Swivel Joint heated swivel joint (double jacket) • HCR-Swivel Joint PTFE-lined swivel joint for aggressive fluids • F-Swivel Joint foodstuff-swivel joint for hygienic applications • SO-Swivel Joint spezial designs according

    to the customers’ specific requirements

    Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000 [email protected] www.hanwel.com

  • Designs are subject to change without notice 12/2004

    5

    1

    Item Denomination

    1 Stator

    2 Rotor

    5 Back up ring

    6 Internal scraper

    10 Main seal

    11 Dust seal

    12 Stopper with hexagon socket

    13 Stopfen with internal thread

    15 Ball

    16 Grease nipple

    W-Swivel Joint

    Swivel joints made of carbon steel up to working pressure 420 bar

    Swivel joints made of stainless steel up to working pressure 100 bar

    Materials:

    Swivel Joints: St 52-3, 1.4571

    Fittings:

    St 35.8 I, St 35.8III, St 37-3, St 52-3, 1.4571

    All materials with material certificate acc. to EN 10204-3.1B

    Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000 [email protected] www.hanwel.com

  • Designs are subject to change without notice 12/2004

    6

    DN L 1 L 2 L 3 L 4 D

    25 295 ± 3 233 ± 4 38 ± 2,5 171 ± 5 ø 87

    32 295 ± 3 242,5 ± 4 47,5 ± 2,5 190 ± 5 ø 97

    40 295 ± 3 252 ± 4,5 57 ± 3 209 ± 6 ø 97

    50 310 ± 3 286 ± 4,5 76 ± 3 262 ± 6 ø 117

    65 310 ± 3 305 ± 4,5 95 ± 3 300 ± 6 ø 132

    80 312 ± 3 326 ± 4,5 114 ± 3 340 ± 6 ø 152

    100 312 ± 4 364 ± 5 152 ± 3 416 ± 6 ø 172

    125 331 ± 4 421,5 ± 6 190,5 ± 4 512 ± 8 ø 203

    150 331 ± 4 459,5 ± 5 228,5 ± 3 588 ± 6 ø 233

    200 354 ± 4 559 ± 6 305 ± 4 764 ± 8 ø 313

    W–Swivel Joint (2 ball races)

    Swivel joints made of carbon steel up to working pressure 420 bar

    Swivel joints made of stainless steel up to working pressure 100 bar

    Bows acc. to DIN 2605–2–90°-3S

    Materials:

    Swivel Joints:

    St 52-3, 1.4571

    Fittings:

    St 35.8 I, St 35.8III, St 37-3, St 52-3, 1.4571

    All materials with material certificate acc. to EN 10204-3.1B

    Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000 [email protected] www.hanwel.com

  • Designs are subject to change without notice 12/2004 7

    DN L 1 L 2 L 3 L 4 D

    25 171 ± 3 171 ± 4 78 ± 4 171 ± 5 ø 115

    32 175 ± 3 182,5 ± 4 89,5 ± 4 190 ± 5 ø140

    40 179 ± 3 194 ± 4,5 101 ± 4,5 209 ± 6 ø 150

    50 200 ± 3 231 ± 4,5 123 ± 4,5 262 ± 6 ø 165

    65 200 ± 3 250 ± 4,5 142 ± 4,5 300 ± 6 ø 185

    80 212 ± 3 276 ± 4,5 166 ± 4,5 340 ± 6 ø 200

    100 216 ± 4 316 ± 5 206 ± 5 416 ± 6 ø 220

    125 241 ± 4 376,5 ± 6 247,5 ± 6 512 ± 8 ø 250

    150 241 ± 4 414,5 ± 5 285,5 ± 5 588 ± 6 ø 285

    200 278 ± 4 521 ± 6 369 ± 6 764 ± 8 ø 340

    WF–Swivel Joint (2 ball races)

    Bows acc. to DIN 2605–2–90°-3S

    Welding neck flanges acc. to DIN 2633-PN 16

    Materials:

    Swivel Joints:

    St 52-3, 1.4571

    Fittings:

    St 35.8 I, St 35.8III, St 37-3, St 52-3, C 22.8, 1.4571

    All materials with material certificate acc. to EN 10204-3.1B

    Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000 [email protected] www.hanwel.com

  • Designs are subject to change without notice 12/2004 8

    DN L 1 L 2 L 3 L 4 D

    25 175 ± 3 173 ± 4 80 ± 4 171 ± 5 ø 115

    32 179 ± 3 184,5 ± 4 91,5 ± 4 190 ± 5 ø 140

    40 185 ± 3 197 ± 4,5 104 ± 4,5 209 ± 6 ø 150

    50 206 ± 3 234 ± 4,5 126 ± 4,5 262 ± 6 ø 165

    65 214 ± 3 257 ± 4,5 149 ± 4,5 300 ± 6 ø 185

    80 228 ± 3 284 ± 4,5 174 ± 4,5 232 ± 6 ø 200

    100 242 ± 4 329 ± 5 219 ± 5 416 ± 6 ø 235

    125 267 ± 4 389,5 ± 6 260,5 ± 6 512 ± 8 ø 270

    150 281 ± 4 434,5 ± 5 305,5 ± 5 588 ± 6 ø 300

    200 330 ± 4 547 ± 6 395 ± 6 764 ± 8 ø 375

    WF–Swivel Joint (2 Ball races)

    Bows acc. to DIN 2605–2–90°-3S

    Welding neck flanges acc. to DIN 2635-PN 40

    Materials:

    Swivel Joints:

    St 52-3, 1.4571

    Fittings: St 35.8 I, St 35.8III, St 37-3, St 52-3, C 22.8, 1.4571

    All materials with material certificate acc. to EN 10204-3.1B

    Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000 [email protected] www.hanwel.com

  • Designs are subject to change without notice 12/2004 9

    DN L 1 L 2 L 3 L 4 D

    025 – G 1“ 153 ± 1,5 148 ± 2,5 83 ± 4 171 ± 5 ø 87

    032 – G 11/4“ 164,5 ± 1,5 164 ± 2,5 97,5 ± 4 190 ± 5 ø 97

    040 – G 11/2“ 164,5 ± 1,5 173,5 ± 3 107 ± 4,5 209 ± 6 ø 97

    050 – G 2“ 190,5 ± 1,5 210,5 ± 3 134 ± 4,5 262 ± 6 ø 117

    065 – G 21/2“ 240 ± 3 270 ± 4,5 162 ± 4,5 300 ± 6 ø 132

    080 – G 3“ 254 ± 3 297 ± 4,5 187 ± 4,5 340 ± 6 ø 152

    100