˜exible leidingen Swivel joints · 2015. 11. 11. · W–Swivel Joint (2 ball races) Swivel joints...

HANWEL NEDERLAND

flexible leidingen

Swivel joints

Designs are subject to change without notice 12/2004

1

HANWEL is your qualified partner in the field of flexible piping systems. The product range of HANWEL B.V. includes • Swivel Joints • Rotary Joints • Complete prefinished swivel joint systems. Flexible piping systems are used in various industrial sectors, for example.: �� chemical industry �� petrochemical industry �� steel and iron industry �� food industry �� paper and wood industry �� waste water treatment plants, water treatment �� off-Shore-Industry �� dredger and crane industry �� general and special engineering WELFLEX - Swivel joints are used in the following cases:

• movable piping systems are needed for the transport of liquid and gaseous medias

• liquid and gaseous medias must be induced from fixed plant components into rotating plant components

• hose systems must be exculpated from high bending and torsion stresses

Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - [email protected] www.hanwel.com


2

Styles

WELFLEX - Swivel joints are available in 8 styles. By the means of capable combinations of the styles nearly any areal movement of a piping system can be realized.



3

The Welflex programma covers the following type series:

W-Swivel Joint

• welding connection • 2 ball races • radial sealing principle • styles 10 to 31 • DN25 bis DN200

(bigger on request) • up to 420 bar • up to 250° C • materials: St52-3,1.4571 • seal materials: NBR,

Viton, PTFE, PU

LW-Swivel Joint

• welding connection • 1 ball race • radial sealing principle • styles 10 bis 31 • DN25 bis DN200

(bigger on request) • up to 100 bar • up to 250° C • materials: St52-3,1.4571 • seal materials: NBR,

Viton, PTFE, PU

T-Swivel Joint

• internal thread G ½ to G2 • radial

sealing principle • styles 10, 11, 12 • up to 420 bar • up to 250° C • materials: 42CrMo4,

1.4571 • seal materials:

NBR, Viton, PTFE, PU



4

Special Swivel Joints

LA-Swivel Joint

• welding connection • 3-part cabinet • radial sealing principle • double safety sealing • styles 10 bis 31 • DN25 bis DN150 (bigger on request) • up to 40 bar • up to 250° C • materials: 26CrMo4, 1.4571 • seal materials: NBR, Viton, PTFE, PU • free clearance volume execution by additional axial sealing

• HT-Swivel Joint high temperature application up to 400° C and more • HP-Swivel Joint high pressure application up to 1000 bar • H-Swivel Joint heated swivel joint (double jacket) • HCR-Swivel Joint PTFE-lined swivel joint for aggressive fluids • F-Swivel Joint foodstuff-swivel joint for hygienic applications • SO-Swivel Joint spezial designs according

to the customers’ specific requirements



5

1

Item Denomination

1 Stator

2 Rotor

5 Back up ring

6 Internal scraper

10 Main seal

11 Dust seal

12 Stopper with hexagon socket

13 Stopfen with internal thread

15 Ball

16 Grease nipple

W-Swivel Joint

Swivel joints made of carbon steel up to working pressure 420 bar

Swivel joints made of stainless steel up to working pressure 100 bar

Materials:

Swivel Joints: St 52-3, 1.4571

Fittings:

St 35.8 I, St 35.8III, St 37-3, St 52-3, 1.4571

All materials with material certificate acc. to EN 10204-3.1B



6

DN L 1 L 2 L 3 L 4 D

25 295 ± 3 233 ± 4 38 ± 2,5 171 ± 5 ø 87

32 295 ± 3 242,5 ± 4 47,5 ± 2,5 190 ± 5 ø 97

40 295 ± 3 252 ± 4,5 57 ± 3 209 ± 6 ø 97

50 310 ± 3 286 ± 4,5 76 ± 3 262 ± 6 ø 117

65 310 ± 3 305 ± 4,5 95 ± 3 300 ± 6 ø 132

80 312 ± 3 326 ± 4,5 114 ± 3 340 ± 6 ø 152

100 312 ± 4 364 ± 5 152 ± 3 416 ± 6 ø 172

125 331 ± 4 421,5 ± 6 190,5 ± 4 512 ± 8 ø 203

150 331 ± 4 459,5 ± 5 228,5 ± 3 588 ± 6 ø 233

200 354 ± 4 559 ± 6 305 ± 4 764 ± 8 ø 313

W–Swivel Joint (2 ball races)

Swivel joints made of carbon steel up to working pressure 420 bar

Swivel joints made of stainless steel up to working pressure 100 bar

Bows acc. to DIN 2605–2–90°-3S

Materials:

Swivel Joints:

St 52-3, 1.4571

Fittings:

St 35.8 I, St 35.8III, St 37-3, St 52-3, 1.4571



Designs are subject to change without notice 12/2004 7

DN L 1 L 2 L 3 L 4 D

25 171 ± 3 171 ± 4 78 ± 4 171 ± 5 ø 115

32 175 ± 3 182,5 ± 4 89,5 ± 4 190 ± 5 ø140

40 179 ± 3 194 ± 4,5 101 ± 4,5 209 ± 6 ø 150

50 200 ± 3 231 ± 4,5 123 ± 4,5 262 ± 6 ø 165

65 200 ± 3 250 ± 4,5 142 ± 4,5 300 ± 6 ø 185

80 212 ± 3 276 ± 4,5 166 ± 4,5 340 ± 6 ø 200

100 216 ± 4 316 ± 5 206 ± 5 416 ± 6 ø 220

125 241 ± 4 376,5 ± 6 247,5 ± 6 512 ± 8 ø 250

150 241 ± 4 414,5 ± 5 285,5 ± 5 588 ± 6 ø 285

200 278 ± 4 521 ± 6 369 ± 6 764 ± 8 ø 340

WF–Swivel Joint (2 ball races)


Welding neck flanges acc. to DIN 2633-PN 16

Materials:

Swivel Joints:

St 52-3, 1.4571

Fittings:

St 35.8 I, St 35.8III, St 37-3, St 52-3, C 22.8, 1.4571




DN L 1 L 2 L 3 L 4 D

25 175 ± 3 173 ± 4 80 ± 4 171 ± 5 ø 115

32 179 ± 3 184,5 ± 4 91,5 ± 4 190 ± 5 ø 140

40 185 ± 3 197 ± 4,5 104 ± 4,5 209 ± 6 ø 150

50 206 ± 3 234 ± 4,5 126 ± 4,5 262 ± 6 ø 165

65 214 ± 3 257 ± 4,5 149 ± 4,5 300 ± 6 ø 185

80 228 ± 3 284 ± 4,5 174 ± 4,5 232 ± 6 ø 200

100 242 ± 4 329 ± 5 219 ± 5 416 ± 6 ø 235

125 267 ± 4 389,5 ± 6 260,5 ± 6 512 ± 8 ø 270

150 281 ± 4 434,5 ± 5 305,5 ± 5 588 ± 6 ø 300

200 330 ± 4 547 ± 6 395 ± 6 764 ± 8 ø 375

WF–Swivel Joint (2 Ball races)


Welding neck flanges acc. to DIN 2635-PN 40

Materials:

Swivel Joints:

St 52-3, 1.4571

Fittings: St 35.8 I, St 35.8III, St 37-3, St 52-3, C 22.8, 1.4571




DN L 1 L 2 L 3 L 4 D

025 – G 1“ 153 ± 1,5 148 ± 2,5 83 ± 4 171 ± 5 ø 87

032 – G 11/4“ 164,5 ± 1,5 164 ± 2,5 97,5 ± 4 190 ± 5 ø 97

040 – G 11/2“ 164,5 ± 1,5 173,5 ± 3 107 ± 4,5 209 ± 6 ø 97

050 – G 2“ 190,5 ± 1,5 210,5 ± 3 134 ± 4,5 262 ± 6 ø 117

065 – G 21/2“ 240 ± 3 270 ± 4,5 162 ± 4,5 300 ± 6 ø 132

080 – G 3“ 254 ± 3 297 ± 4,5 187 ± 4,5 340 ± 6 ø 152

100 – G 4“ 278 ± 4 347 ± 5 237 ± 5 416 ± 6 ø 172

125 – G 5“ 315 ± 4 413,5 ± 6 284,5 ± 6 512 ± 8 ø 203

150 – G 6“ 315 ± 4 451,5 ± 5 322,5 ± 5 588 ± 6 ø 233

WS–Swivel Joint (2 ball races)


sockets acc. to DIN 2986-PN 50

Materials:

Swivel Joints: St 52-3, 1.4571

Fittings: St 35.8 I, St 35.8III, St 37-3, St 52-3, 42CrMo4, 1.4571




DN L 1 L 2 L 3 L 4 D

025 – G 1“ 165 ± 3 168 ± 4 75 ± 4 171 ± 5 ø 87

032 – G 11/4“ 171 ± 3 180,5 ± 4 87,5 ± 4 190 ± 5 ø 97

040 – G 11/2“ 171 ± 3 190 ± 4,5 97 ± 4,5 209 ± 6 ø 97

050 – G 2“ 200 ± 3 231 ± 4,5 123 ±4,5 262 ± 6 ø 117

065 – G 21/2“ 220 ± 3 260 ± 4,5 152 ±4,5 300 ± 6 ø 132

080 – G 3“ 232 ± 3 286 ± 4,5 176 ±4,5 340 ± 6 ø 152

100 – G 4“ 252 ± 4 334 ± 5 224 ± 5 416 ± 6 ø 172

125 – G 5“ 301 ± 4 406,5 ± 6 277,5 ± 6 512 ± 8 ø 203

150 – G 6“ 331 ± 4 459,5 ± 5 330,5 ± 5 588 ± 6 ø 233

WN–Swivel Joint (2 ball races)


Pipe nipples acc. to DIN 2982-PN 50

Materials:

Swivel Joints:

St 52-3, 1.4571

Fittings:

St 35.8 I, St 35.8III, St 37-3, St 52-3, 1.4571




Item Denomination

1 Stator

2 Rotor

5 Back Up Ring

6 Internal Scraper

10 Main Seal

11 Dust Seal


15 Ball

16 Grease Nipple

LW-Swivel Joint

up to working pressure 40 bar

Materials:

Swivel Joints:

St 52-3, 1.4571

Fittings:

St 35.8 I, St 35.8III, St 37-3, St 52-3, 1.4571




DN L 1 L 2 L 3 L 4 D

25 275 ± 3 213 ± 4 38 ± 2,5 151 ± 5 ø 87

32 275 ± 3 222,5 ±

4 47,5 ± 2,5

170 ± 5 ø 97

40 275 ± 3 232 ± 4,5 57 ± 3 189 ± 6 ø 97

50 285 ± 3 261± 4,5 76 ± 3 237 ± 6 ø 117

65 285 ± 3 280 ± 4,5 95 ± 3 275 ± 6 ø 132

80 287 ± 3 301± 4,5 114 ± 3 315 ± 6 ø 152

100 287 ± 4 339 ± 5 152 ± 3 391 ± 6 ø 172

125 296 ± 4 386,5 ± 6 190,5 ± 4 477 ± 8 ø 203

150 296 ± 4 424,5 ±

5 228,5 ± 3 553 ± 6 ø 233

200 314 ± 4 519 ± 6 305 ± 4 724 ± 8 ø 313

LW–Swivel Joint (1 ball race)

Up to working pressure 40 bar


Materials:

Swivel Joints:

St 52-3, 1.4571

Fittings:

St 35.8 I, St 35.8III, St 37-3, St 52-3, 1.4571




DN L 1 L 2 L 3 L 4 D

25 151 ± 3 151 ± 4 78 ± 4 151 ± 5 ø 115

32 155 ± 3 162,5 ± 4 89,5 ± 4 170 ± 5 ø140

40 159 ± 3 174 ± 4,5 101 ± 4,5 189 ± 6 ø 150

50 175 ± 3 206 ± 4,5 123 ± 4,5 237 ± 6 ø 165

65 175 ± 3 225 ± 4,5 142 ± 4,5 275 ± 6 ø 185

80 187 ± 3 251 ± 4,5 166 ± 4,5 315 ± 6 ø 200

100 191 ± 4 291 ± 5 206 ± 5 391 ± 6 ø 220

125 206 ± 4 341,5 ± 6 247,5 ± 6 477 ± 8 ø 250

150 206 ± 4 379,5 ± 5 285,5 ± 5 553 ± 6 ø 285

200 238 ± 4 481 ± 6 369 ± 6 724 ± 8 ø 340

LWF–Swivel Joint (1 ball race)


Welding Neck Flanges acc. to DIN 2633-PN 16

Materials:

Swivel Joints:

St 52-3, 1.4571

Fittings:

St 35.8 I, St 35.8III, St 37-3, St 52-3, C 22.8, 1.4571




DN L 1 L 2 L 3 L 4 D

25 155 ± 3 153 ± 4 80 ± 4 151 ± 5 ø115

32 159 ± 3 164,5 ± 4 91,5 ± 4 170 ± 5 ø140

40 165 ± 3 177 ± 4,5 104 ± 4,5 189 ± 6 ø150

50 181 ± 3 209 ± 4,5 126 ± 4,5 237 ± 6 ø165

65 189 ± 3 232 ± 4,5 149 ± 4,5 275 ± 6 ø185

80 203 ± 3 259 ± 4,5 174 ± 4,5 232 ± 6 ø200

100 217 ± 4 304 ± 5 219 ± 5 391 ± 6 ø235

125 232 ± 4 354,5 ± 6 260,5 ± 6 477 ± 8 ø270

150 246 ± 4 399,5 ±5 305,5 ± 5 553 ± 6 ø300

200 290 ± 4 507 ± 6 395 ± 6 724 ± 8 ø375

LWF–Swivel Joint (1 ball race)


Welding Neck Flanges acc. to DIN 2635-PN 40

Materials:

Swivel Joints:

St 52-3, 1.4571

Fittings:

St 35.8 I, St 35.8III, St 37-3, St 52-3, C 22.8, 1.4571




DN L 1 L 2 L 3 L 4 D

025 – G 1“ 161± 3 156 ± 4 83 ± 4 151 ± 5 ø 87

032 – G 11/4“ 171 ± 3 170,5 ± 4 97,5 ± 4 170 ± 5 ø 97

040 – G 11/2“ 171 ± 3 180 ± 4,5 107 ± 4,5 189 ± 6 ø 97

050 – G 2“ 197 ± 3 217 ± 4,5 134 ± 4,5 237 ± 6 ø 117

065 – G 21/2“ 215 ± 3 245 ± 4,5 162 ± 4,5 275 ± 6 ø 132

080 – G 3“ 229 ± 3 272 ± 4,5 187 ± 4,5 315 ± 6 ø 152

100 – G 4“ 253 ± 4 322 ± 5 237 ± 5 391 ± 6 ø 172

125 – G 5“ 280 ± 4 378,5 ± 6 284,5 ± 6 477 ± 8 ø 203

150 – G 6“ 280 ± 4 416,5 ± 5 322,5 ± 5 553 ± 6 ø 233

LWS–Swivel Joint (1 ball race)

Up working pressure 40 bar


Sockets acc. to DIN 2986

Materials:

Swivel Joints:

St 52-3, 1.4571

Fittings:

St 35.8 I, St 35.8III, St 37-3, St 52-3, 1.4571




DN L 1 L 2 L 3 L 4 D

025 – G 1“ 145 ± 3 148 ± 4 75 ± 4 151 ± 5 ø 87

032 – G 11/4“ 151 ± 3 160,5 ± 4 87,5 ± 4 170 ± 5 ø 97

040 – G 11/2“ 151 ± 3 170 ± 4,5 97 ± 4,5 189 ± 6 ø 97

050 – G 2“ 175 ± 3 206 ± 4,5 123 ± 4,5 237 ± 6 ø 117

065 – G 21/2“ 195 ± 3 235 ± 4,5 152 ± 4,5 275 ± 6 ø 132

080 – G 3“ 207 ± 3 261 ± 4,5 176 ± 4,5 315 ± 6 ø 152

100 – G 4“ 227 ± 4 309 ± 5 224 ± 5 391 ± 6 ø 172

125 – G 5“ 266 ± 4 371,5 ± 6 277,5 ± 6 477 ± 8 ø 203

150 – G 6“ 296 ± 4 424,5 ± 5 330,5 ± 5 553 ± 6 ø 233

LWN–Swivel Joint (1 ball race)

Up to working pressure 40 bar


Pipe Nipples acc. to DIN 2982

Materials:

Swivel Joints:

St 52-3, 1.4571

Fittings: St 35.8 I, St 35.8III, St 37-3, St 52-3, 1.4571




Item Denomination

1 Stator

2 Rotor

5 Back Up Ring

6 Internal Scraper

10 Main Seal

11 Dust Seal


13 Stopper with internal thread

15 Ball

16 Grease Nipple

T-Swivel Joint

Swivel Joints made of carbon steel up to working pressure 420 bar

Swivel Joints made of stainless steel up working pressure 100 bar

Whitworth – Pipe thread acc. to DIN 2999 or NPT

Materials:

Swivel Joints:

42CrMo4, 1.4571




DN 8 10 15 20 25 32 40 50

T 1 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"

L 1 100 100 100 100 112 122 122 145

L 2 120 120 120 120 137 172 172 200

L 3 140 140 140 140 162 212 212 245

L 4 18 18 18 18 20 22 23 26

L 5 100 100 100 100 112 137 137 160

L 6 26 26 26 26 33,5 38,5 38,5 45

L 7 40 40 40 40 50 70 70 80

L 8 100 100 100 100 112 142 142 165

D ø73 ø73 ø73 ø73 ø87 ø97 ø97 ø117

SW 55 55 55 55 46 55/60 60 70

T- Swivel Joint (2 ball races)

Swivel Joints made of carbon steel working pressure up to420 bar

Swivel Joints made of stainless steel working pressure up to 100 bar

Whitworth – pipe thread acc. to DIN 2999 or NPT

Materials:

Swivel Joints:

42CrMo4, 1.4571




Item Denomination

1 Stator 2 Rotor 3 Cover 4 Packing Sleeve 5 Back Up Ring 9 Cover Seal 10 Main Seal 11 Dust Seal, Secondary Seal 12 Stopper with hexagon socket 13 Stopper with internal thread 16 Grease Nipple 18 Socket Head Screw 19 Plastic Stopper

LA-Swivel Joint

Swivel Joints up to 40 bar

3-part cabinet

Double safety sealing (radial)

Materials:

Swivel Joints:

Medium touched 1.4571 complete 1.4571 26CrMo4




Rotary Joints Rotary Joints are used when several medias, liquid and/or gaseous, must be fed into a rotating plant component at the same time. By the means of an applicable choice of materials rotary joints can be used for nearly all tasks. Typical applications are for example • Converter-rotary joints • Hydraulic-rotary joints in dredgers and cranes



As a result of the variety of the customers’ specific demands the design and manufacturing is carried out in close collaboration with the customer. A rotary joint is always a problem solution specific to the customer.

Technical parameters

number of channels acc. to the customers requirements size of the channels acc. to the customers requirements connections acc. to the customers requirements working pressure vacuum up to app. 1000 bar working temperature -60°C up to +250°C rotational speed > 1000 min-1 materials 42CrMo4, St52-3, 1.4301, 1.4541,

1.4571 (others on request) seals PTFE, Viton, Perbunan, PU


f exible leidingenafsluitersophang- en oplegsystemen

From the point of enquiry till after sales services you wil be in contact with the same contact person. This is how we get to know you and your company. Your Hanwel contact person will arrange that your questions, enquiries and orders will handled quick and correct.

Our service:

Customer support:• Personal contact• Over 40 years of experience• Skilled personnel• Extended technical information available• Reliable partner• One contact person from quotation till after sales service• Personal advise

Knowledge:• Specialists per product group• High expertise• Project supervision• Training and advise • Knowledge of applications and cost savings

Service centre:• Product specialists• Daily shipments• Large stock• Rush deliveries • Site inspections• Own equipment for pre-tensioning of spring hangers

Quality and environment:• Continuously investing in quality• Certified according ISO 9001• Code of conduct• Certified suppliers

Hanwel service

No.: NL7000110

Hanwel B.V.Jan Tinbergenstraat 2097559 SP Hengelo ovNederlandTel.: +31 (0) 74 265 00 00Fax: +31 (0) 74 265 00 01Email: [email protected]

www.hanwel.com

˜exible leidingen Swivel joints · 2015. 11. 11. · W–Swivel Joint (2 ball races) Swivel joints...

Documents

Transcript of ˜exible leidingen Swivel joints · 2015. 11. 11. · W–Swivel Joint (2 ball races) Swivel joints...