Swivel Joints - MannTek · Art. No: XB08 Version: 140630 Swivels Swivel Joints Product Information...
Transcript of Swivel Joints - MannTek · Art. No: XB08 Version: 140630 Swivels Swivel Joints Product Information...
Art. No: XB08 Version: 140630
SwivelsSwivel Joints
Product Information
Sweden
2
!"#$%&'#"(#')*+#,-%.-'#/%0#1-#&-$&"234-2#*5#%50#("&/#"
#%50#/-%5+#6*')"3'#$-&/*++*"5#*5#6&*'*57#(&"/#')-#$31,*+)-&8
SwivelsSwivel Joints
Mann Teknik AB is a Swedish com-pany located in Mariestad, Sweden.
Mann Teknik AB designs, manufactu-res and markets products for safe and environmentally friendly handling of !""#$%%&'$()*&+%(,-#(./$(0/$1&0!2(!3+(petrochemical industries.
The main product is the Dry Disconnect Couplings, DDCouplings®, for spill free liquid handling. The products are mar-keted through independent representa-tives in more than 30 countries. Mann Teknik AB have many years of experience in designing, producing and marketing of DDCouplings® all since 1977.
Mann Teknik AB has shown a high rate of growth during the past years and is now a major player in its specialised 4$2+(-,(-5$#!.&-36(7/&%(&%(+*$(.-(!(+$.$#-mined expansion into growing markets and recognition by customers of the robust design and reliable quality of the products.
8!33(7$93&9(:;(!#$(0$#.&4$+(.-(ISO9001:2008. The products are CE-2!<$2$+6(7/$(1!&3(5#-+*0.%(!#$(0$#.&4$+(to PED, the European Pressure Equip-ment Directive and ATEX, the European directive for Equipment intended for use in Potentially Explosive Atmosphe-res. The products are produced in accor-dance with several important standards, e.g. the NATO STANAG 3756
About Mann Tek Swivels
Swivel Joints are used in the industry wherever a
movable pipe-connection system between two equip-
ment parts is needed. Avoiding one of the biggest
causes of premature hose failure. Torque stress
is the largest single cause of PTFE and Stainless
steel convoluted hose failure.
The swivel joints are designed for slow rotary mo-
.&-3%(*3+$#(./$(&3)*$30$(-,(/&"/(&3.$#3!2(5#$%%*#$%(
and/or external stress such as traction and bending
forces.
With an appropriate combination of swivel joints ne-
arly all movements from the simple rotation or swivel-
ling motion up to motional actions in space can be
realized.
Table of content
Introduction
Company Approvals
Content Page
Company information and introduction 2
Hose Swivels - single ball bearing 3-4
Heavy Duty Swivels - double ball race 5-6
How to order Swivels 7
Flange facing types according to EN 1092 8
Flange Measurement 9-10
Flange connection 11
About NPT and BSP threads 12
Flat Seals for thread 13
Flat Seals for thread 14
O-ring materials 15
=./$#(2$!)$.%(!3+(0-3.!0.(&3,-#1!.&-3( (>?
3SwivelsSwivel Joints
!"#$%&'#"(#')*+#,-%.-'#/%0#1-#&-$&"234-2#*5#%50#("&/#"
#%50#/-%5+#6*')"3'#$-&/*++*"5#*5#6&*'*57#(&"/#')-#$31,*+)-&8
The use of hose swivel avoids torsion of
/-%$(!%%$1<2&$%@(&6$6(&3(422&3"(1!0/&3$%@(
and improves the handling and coupling
of nozzles for refuelling of petroleum
based products and chemicals.
Use of Hose SwivelsLow maintenance
Each unit consist of two body halves. Stainless Steel
balls and a single spring assisted O-ring seal.
Compact external dimensions
!"#$%&'(%)*+,%-%.'(%/),001),%2)'/
Full range of sizes, materials, seals and
connections
Minimal maintenance requirements
Safety
Swivel function - allows the hose to relax to it´s natu-
ral rest position whilst allowing freedom of movement
without imparting torque stress at the point of con-
nection - Torque stress is the largest single cause
of Composite, PTFE and Stainless Steel convoluted
hose failure.
Economical
Cost effective solution to prolong lifetime of hoselines.Unsuitable for high bending moments.
Heavy Duty Swivels should be used in
these applications.
NOTE
Available with parallel BSP and
tapered NPT threads.
Ballbearings in
Stainless Steel
Wavy washer in
Stainless Steel
Standard O-rings
in FPM (Viton®).
Other on request!
Available with parallel
BSP and tapered
NPT threads.
Swivel body in
Aluminium, Brass
or Stainless Steel.
Other on request!
Standard Flat seal (for
BSP threads and body in
Stainless Steel) in PTFE
!"#$%&'()*+,-#.*%&*.#/0#1,2
Mann Tek standard Hose Swivel
Hose Swivels - single ball bearing
Applications
• Hose assemblies
• Filling machines
• Handling of refuelling of equipment e.t.c.
4
!"#$%&"!'"&()*"+,$-,&".$/"0,"%,#%!123,1")4"$4/"'!%."!%"0/"$4/".,$4*"5)&(!2&"#,%.)**)!4")4"5%)&)46"'%!."&(,"#20+)*(,%7
SwivelsSwivel Joints
One side Other side
345-657%7$),*2 Flange
One side Other side
Flange Flange
One side Other side
345-657%8,9*., 345-657%8,9*.,
One side Other side
345-657%8,9*., 345-657%:*.,
One side Other side
345-657%:*., 345-657%:*.,
A&.-3B(!3+(7$)-3B(!#$(#$"&%.$#$+(.#!+$1!#9%(-,(C*D-3.@(C*D-3.(E2!%.-1$#%6(((((Vulkollan® is registered trademark of Bayer AG
Flanges;<6%8.*=#,%><4?%@ABC%56%@A-@DE%56%CF-GA%>7H/,%A, B, E, F 2) )
I4I%8.*=#,%>I4:J-I64<%@DKFL
TW-Flange (DIN 28459)
T.T.M.A
Swivel sizesM-GN @N @%@-GN @%@-CN CN C%@-CN MN GN
7$),*20%>8,9*.,%-%:*.,1))BSP (ISO 228)
657%>I4:J-I64<%@KCAK@
3457%>J6%@ACCDL
ACME
Weld end
Standard Materials and standard Seals
Component Material Material Standard Operation temp O-ring Flat Seal
Body
AluminiumEN 755 - AW-6262-T6
-40oC to 250oC85:-O8:
(Viton®)
PUR
(Vulkollan®)EN 1706-AC-42100-T6
BrassEN 12164 - CW614N PUR
(Vulkollan®)EN 1982 - CB491K-GS
Stainless
Steel
EN 10272 - 1.4404+AT PTFE
F7$)-3BGEN 10213 - 1.4409+AT
Connections
Materials and Seals
Sizes
Illustrations of combinations
1
We manufacture Swivels in different sizes, connections and materials on request!
One side Other side
Weld end Weld end *)
*) Or other connection on request*)
1) Any combinations of male and female threads is possible. 2) Se page14 for illustrations of different((((.H5$%(-,(CIJK)!3"$%
Working Pressure: (10 bar) - 300 psi (20 bar)
Hose Swivels - single ball bearing
Combinations of sizes, connections and materials
5SwivelsSwivel Joints
!"#$%&"!'"&()*"+,$-,&".$/"0,"%,#%!123,1")4"$4/"'!%."!%"0/"$4/".,$4*"5)&(!2&"#,%.)**)!4")4"5%)&)46"'%!."&(,"#20+)*(,%7
Heavy duty Swivel in Stainless Steel
Use of Heavy Duty Swivel - double ball race
Available with parallel BSP and
tapered NPT threads.
Ballbearings in
Stainless Steel
Standard Flat seal (for
BSP threads and body in
Stainless Steel) in PTFE
!"#$%&'()*+,-#.*%&*.#/0#1,2
Available with parallel
BSP and tapered
NPT threads.
Swivel body in
Stainless Steel.
+,-#.*%&*.#/0#1,2
3,4&54.5*+6.7&81
7&*9:;*!<7,%&'()
+,-#.*%&*.#/0#1,2
Standard seal in
:"9=*!"#$%&'()
+,-#.*%&*.#/0#1,2
,(-#()!3"$%6
Low maintenance
Each unit consist of two body halves. Stainless
Steel balls and a single spring assisted O-ring seal.
Compact external dimensions
!"#$%&'(%)*+,%-%.'(%/),001),%2)'/
Full range of sizes, materials, seals and
connections
Minimal maintenance requirements
Safety
Swivel function - allows the hose to relax to it´s
natural rest position whilst allowing freedom of
movement without imparting torque stress at the
point of connection - Torque stress is the largest
single cause of Composite, PTFE and Stainless
Steel convoluted hose failure.
Economical
Cost effective solution to prolong lifetime of
hoselines.
Heavy Duty Swivels - double ball race
The swivel Heavy duty is designed
especially for hose rails to load and
unload products like Aliphatic and Aro-
matic hydrocarbons, Alcohols and
Amines, Ether and Ester, Glycos and
Water, Liquid Fertilizers, Acids and Lyes.
Please ask us for your special
application.
NOTE
Applications• Offshore hose reels ship-to-shore
• Oil platform loading rigs
• Marine and industrial loading arms
• Hoses for road and rail tanker
• Chemical and petrochemical liquids
((!3+(2&L*$4$+("!%$%
D
!"#$%&"!'"&()*"+,$-,&".$/"0,"%,#%!123,1")4"$4/"'!%."!%"0/"$4/".,$4*"5)&(!2&"#,%.)**)!4")4"5%)&)46"'%!."&(,"#20+)*(,%7
SwivelsSwivel Joints
Compact version
One side Other side
Thread Flange
One side Other side
Flange Flange
One side Other side
Victaulic Victaulic*)
One side Other side
345-657%8 345-657%8
One side Other side
345-657%8 345-657%:
One side Other side
345-657%: 345-657%:
A&.-3B(!3+(7$)-3B(!#$(#$"&%.$#$+(.#!+$1!#9%(-,(C*D-3.@(C*D-3.(E2!%.-1$#%6(((((Vulkollan® is registered trademark of Bayer AG
1) Any combinations of male and female threads is possible.
Flanges;<6%8.*=#,%><4?%@ABC%56%@A-@DE%56%CF-GA%>7H/,%A, B, E, F 2) )
I4I%8.*=#,%%@FA%/0"%-%MAA%/0"%>I4:J-I64<%@DKFL
TW-Flange (DIN 28459)
T.T.M.A
Swivel sizes2" 3" 4" 5" DN 8" 10"
7$),*20%>8,9*.,%-%:*.,1))BSP (ISO 228)
657%>I4:J-I64<%@KCAK@
3457%>J6%@ACCDL
ACME
Victaulic
Weld end
Standard Materials and standard Seals
Component Material Material Standard Operation temp Seal Flat Seal
Body
AluminiumEN 755 - AW-6262-T6
-100oC to 250oCPTFE
F7$)-3BG
PUR
(Vulkollan®)EN 1706-AC-42100-T6
Stainless
Steel
EN 10272 - 1.4404+AT PTFE
F7$)-3BGEN 10213 - 1.4409+AT
Connections
Materials and Seals
Sizes
Combinations of sizes, connections and materials
Illustrations of combinationsWe manufacture Swivels in different sizes, connections and materials on request!
4" NPT
130
dth
NO.Revision comprises
2) Se page 14 for illustrations of different((((.H5$%(-,(CIJK)!3"$%
One side Other side
Weld end Weld end *)
*) Or other connection on request*) Or other connection on request
Or other cOrOr
1)*+,-.*,/.*!2"
Working Pressure: 150 psi (10 bar)-1800 psi (125 bar)
Heavy Duty Swivels - double ball race
7SwivelsSwivel Joints
!"#$%&"!'"&()*"+,$-,&".$/"0,"%,#%!123,1")4"$4/"'!%."!%"0/"$4/".,$4*"5)&(!2&"#,%.)**)!4")4"5%)&)46"'%!."&(,"#20+)*(,%7
86!#!\]!;D$!3G+O'<+:!8`!#!\]!5$.!3G+O'<+:!87!#!6]!;D$!3G+O'<+:!8K!#!6]!5$.!3G+O'<+:!8L!#!6!_]!;D$!3G+O'<+:!8W!#!6!_]!5$.!3G+O'<+:!8V!#!6!a]!;D$!3G+O'<+:!89!#!6!a]!5$.!3G+O'<+:!8b!#!6!\]!;D$!3G+O'<+:!68!#!`]!;D$!3G+O'<+:!66!#!`]!5$.!3G+O'<+:!6`!#!`!a]!;D$!3G+O'<+:!67!#!`!a]!5$.!3G+O'<+:!6K!#!7]!;D$!3G+O'<+:!6L!#!7]!5$.!3G+O'<+:!6W!#!K]!;D$!3G+O'<+:!6V!#!K]!5$.!3G+O'<+:!69!#!G<'/P+!@/(,2<<+(!c6LW!6b!#!G<'/P+!@/(,2<<+(!c6WL!`8!#!G<'/P+!@/(,2<<+(!c`68!`6!#!G<'/P+!@/(,2<<+(!c`78!``!#!G<'/P+!@/(,2<<+(!c`LK!`7!#!G<'/P+!?5!`L!$5!68[6W!`K!#!G<'/P+!?5!`L!$5!`L[K8!`L!#!G<'/P+!?5!7`!$5!68[6W!`W!#!G<'/P+!?5!7`!$5!`L[K8!`V!#!G<'/P+!?5!K8!$5!68[6W!`9!#!G<'/P+!?5!K8!$5!`L[K8!`b!#!G<'/P+!?5!L8!$5!`L[K8d!78!#!G<'/P+!?5!L8!$5!68[6W!76!#!G<'/P+!?5!L8!$5!`L[K8!7`!#!G<'/P+!?5!WL!$5!`L[K8d!77!#!G<'/P+!?5!WL!$5!68[6W!7K!#!G<'/P+!?5!WL!$5!`L[K8!7L!#!G<'/P+!?5!98!$5!`L[K8d!7W!#!G<'/P+!?5!98!$5!68[6W!7V!#!G<'/P+!?5!98!$5!`L[K8!79!#!G<'/P+!?5!688!$5!`L[K8d!7b!#!G<'/P+!?5!688!$5!68[6W!K8!#!G<'/P+!?5!688!$5!`L[K8!K6!#!G<'/P+!?5!6`L!$5!W!K`!#!G<'/P+!?5!6`L!$5!68[6W!K7!#!G<'/P+!?5!6`L!$5!`L[K8!KK!#!G<'/P+!?5!6L8!$5!W!KL!#!G<'/P+!?5!6L8!$5!68[6W!KW!#!G<'/P+!?5!6L8!$5!`L[K8!KV!#!G<'/P+!?5!`8!$5!68[6W!K9!#!G<'/P+!?5!`8!$5!`L[K8!Kb!#!G<'/P+!\]!"5D%!><'AA!6L8!L8!#!G<'/P+!\]!"5D%!><'AA!788!L6!#!G<'/P+!6]!"5D%!><'AA!6L8!L`!#!G<'/P+!6]!"5D%!><'AA!788!L7!#!G<'/P+!6!_]!"5D%!><'AA!6L8!LK!#!G<'/P+!6!_]!"5D%!><'AA!788!LL!#!G<'/P+!6!a]!"5D%!><'AA!6L8!LW!#!G<'/P+!6!a]!"5D%!><'AA!788!LV!#!G<'/P+!`]!"5D%!><'AA!6L8!L9!#!G<'/P+!`]!"5D%!><'AA!788!Lb!#!G<'/P+!`!a]!"5D%!><'AA!6L8!W8!#!G<'/P+!`!a]!"5D%!><'AA!788!W6!#!G<'/P+!7]!"5D%!><'AA!6L8!W`!#!G<'/P+!7]!"5D%!><'AA!788!W7!#!G<'/P+!K]!"5D%!><'AA!6L8!WK!#!G<'/P+!K]!"5D%!><'AA!788!WL!#!G<'/P+!.T!6!37]!&!?5!98:!WW!#!G<'/P+!.T!7!3K]!&!?5!688:!WV!#!G<'/P+!7]!.X.XSX"X!W9!#!G<'/P+!K]!.X.XSX"X!Wb!#!\]!;D$!3S'<+:!V8!#!\]!5$.!3S'<+:!V6!#!6]!;D$!3S'<+:!V`!#!6]!5$.!3S'<+:!V7!#!6!_]!;D$!3S'<+:!VK!#!6!_]!5$.!3S'<+:!VL!#!6!a]!;D$!3S'<+:!VW!#!6!a]!5$.!3S'<+:!VV!#!6!\]!;D$!3S'<+:!V9!#!`]!;D$!3S'<+:!
Vb!#!`]!5$.!3S'<+:!98!#!`!a]!;D$!3S'<+:!!96!#!`!a]!5$.!3S'<+:!9`!#!7]!;D$!3S'<+:!97!#!7]!5$.!3S'<+:!9K!#!K]!;D$!3S'<+:!9L!#!K]!5$.!3S'<+:!9W!#!T+<(XZ<'/P+!`]!cW8^L!2//+,!9V!#!G<'/P+!.T!6!3`]!?5L8:!!99!#!T+<(XZ<'/P+!`]!cL8&cV8!3Z<'*:!9b!#!T+<(XZ<'/P+!`]!cLV!32/*X!MF'OZ+,:!b8!#!T+<(XZ<'/P+!`]!cW8!3I@*+,!MF'OZ+,:!b6!#!T+<(XZ<'/P+!7]!cVL&cb8!3Z<'*:!b`!#!T+<(XZ<'/P+!7]!cVW!32/*X!MF'OZ+,:!b7!#!T+<(XZ<'/P+!7]!c9b!3I@*+,X!MF'OZ+,:!bK!#!T+<(XZ<'/P+!K]!c688&c6`8!3Z<'*:!bL!#!T+<(XZ<'/P+!K]!c68`!32/*X!MF'OZ+,:!bW!#!T+<(XZ<'/P+!K]!c689!32/*X!MF'OZ+,:!bV!#!T+<(XZ<'/P+!K]!c66K!3I@*+,X!MF'OZ+,:!b9!#!G<'/P+!.T!6!3`]!&!?5!L8:!!!!!!!!!!E2*F!(,'2/!MI//+M*2I/!bb!#!G<'/P+!?5!6L8!$5!`L!688!#!G<'/P+!W]!"5D%!><'AA!6L8!686!#!G<'/P+!W]!"5D%!><'AA!788!68`!#!G<'/P+!?5!`88!$5!68!687!#!G<'/P+!?5!`88!$5!6W!68K!#!G<'/P+!?5!`88!$5!`L!68L!#!G<'/P+!9]!"5D%!><'AA!6L8!68W!#!G<'/P+!9]!"5D%!><'AA!788!68V!#!G<'/P+!De@',+!%DJ!KL!689!#!DW8fW!3G+O'<+:!68b!#!DW8fW!3S'<+:!668!#!W]!;D$!3G+O'<+:!666!#!W]!5$.!3G+O'<+:!66`!#!T`]!&!V!3G+O'<+:!667!#!T+<(XZ<'/P+!7]!cb`!2//+,!66K!#!De@',+!Z<'/P+^!K!FI<+A!66L!#!W]!;D$!3S'<+:!66W!#!W]!5$.!3S'<+:!66V!#!9]!5$.!3G+O'<+:!669!#!K]!-2M*'@<2M!!66b!#!G<'/P+!?5!L8!$5!`L[K8dd!6`8!#!G<'/P+!?5!WL!$5!`L[K8dd!6`6!#!G<'/P+!?5!98!$5!`L[K8dd!6``!#!G<'/P+!?5!688!$5!`L[K8dd!6`7!#!T`]!&!V!3S'<+:!6`K!#!L]!5$.!3G+O'<+:!6`L!#!L]!5$.!3S'<+:!6`W!#!G<'/P+!?5!688!$5W!6`V!#!G<'/P+!?5!98!$5W!6`9!#!G<'/P+!?5!WL!$5W!6`b!#!G<'/P+!?5!L8!$5W!678!#!G<'/P+!9]!"5D%!><'AA!W88!676!#!Tb8f6[W]!3G+O'<+:!67`!#!a]!5$.!3G+O'<+:!677!#!a]!;D$!3G+O'<+:!67K!#!G<'/P+!g69KX`^!W!FI<+A!67L!#!G<'/P+!.T!V!3W]!&!?5!6L8:!67W!#!K]!"DD$.!3G+O'<+:!67V!#!.,2M<'O)!?5!`L!679!#!SLKf!6^L!3G+O'<+:!67b!#!`]!.,2M<'O)!3%DJ!`9L`&L6:!6K8!#!T+<(XZ<'/P+!cV7!3I@*+,!MF'OZ+,:!6K6!#!7]!-2M*'@<2M!!6K`!#!G<'/P+!L]!"5D%!><'AA!6L8!6K7!#!7]!;'<<!='<=+!6KK!#!`]!-2M*'@<2M!6KL!#!7]!;D$.!3S'<+:!6KW!#!L]!-2M*'@<2M!6KV!#!`]!;D$.!3G+O'<+:!6K9!#!`]!;D$.!3S'<+:!6Kb!#!6!a]!-2M*'@<2M!6L8!#!`!a]!-2M*'@<2M!6L6!#!G<'/P+!6]!?%5!669WK&`!6L`!#!G<'/P+!`]!?%5!669WK&`!6L7!#!G<'/P+!g67L^!9fSW!6LK!#!K]!;D$.!3G+O'<+:!6LL!#!K]!;D$.!3S'<+:!
6LW!#!T+<(!Z<'/P+!`]!gW6^L!32//+,:!6LV!#!7]!;D$.!3G+O'<+:!6L9!#!T+<(!+/(!6a]!gK9!3I@*+,:!6Lb!#!.F,+'(!.U!LVfK!6W8!#!G<'/P+!`]!;D68!.'Y<+!?!6W6!#!G<'/P+!6`]!"5D%!><'AA!6L8!6W`!#!G<'/P+!68]!"5D%!><'AA!6L8!6W7!#!G<'/P+!?5!`L8!$5!6W!6WK!#!S678fW!3G+O'<+:!6WL!#!G<'/P+!68]!"5D%!><'AA!788!6WW!#!">S4!6_]!3G+O'<+:!6WV!#!">S4!6\]!3G+O'<+:!6W9!#!">S4!`_]!3G+O'<+:!6Wb!#!">S4!7_]!3G+O'<+:!6V8!#!">S4!6_]!3S'<+:!6V6!#!">S4!6\]!3S'<+:!6V`!#!">S4!`_]!3S'<+:!6V7!#!">S4!7_]!3S'<+:!6VK!#!T+<(XZ<'/P+!cVW!3I@*+,X!MF'OZ+,:!6VL!#!G<'/P+!?5!6L!$5!68[6W!6VW!#!G<'/P+!?5!6L!$5!`L[K8!6VV!#!S678fW!3S'<+:!6V9!#!G<'/P+!W]!.X.XSX"X!6Vb!#!G<'/P+!?5!98!$5!`L[K8ddd!698!#!a]!5$.!3S'<+:!696!#!a]!;D$!3S'<+:!69`!#!L]!;D$!3G+O'<+:!697!#!L]!;D$!3S'<+:!!69K!#!T+<(!+/(!9]!g`6b!3I@*+,:!69L!#!T+<(!+/(!W]!g6W9!3I@*+,:!69W!#!G<'/P+!?5!`L8!$5!`L!69V!#!G<'/P+!`]!.X.XSX"X!699!#!G<'/P+!7]!;D68!.'Y<+!?!69b!#!G<'/P+!a]!"5D%!><'AA!6L8!6b8!#!G<'/P+!6]!"5D%!><'AA!6L8!G<'*!G'M+!6b6!#!G<'/P+!6`]!"5D%!><'AA!788!6b`!#!G<'/P+!?5`L8!$568!6b7!#!T+<(!+/(!c66K!DMF+(@<+!K8!6bK!#!T+<(!+/(!c66K!DMF+(@<+!98!6bL!#!W]!-2M*'@<2M!6bW!#!6]!-2M*'@<2M!6bV!#!G<'/P+!?5!6`L!h%D!LR!6b9!#!G<'/P+!?5!688!h%D!LR!!6bb!#!G<'/P+!?5!98!h%D!LR!`88!#!G<'/P+!?5!L8!h%D!LR!`86!#!G<'/P+!?5!K8!h%D!LR!`8`!#!G<'/P+!`]!?%5!669WK&7!`87!#!7a]!;D$!3G+O'<+:!`8K!#!G<'/P+!c668^!c9W[cLXL!3Wf:!`8L!#!T+<(!+/(!cW8!DMF+(@<+!98!`8W!#!T+<(!+/(!c9b!DMF+(@<+!K8!`8V!#!T+<(!+/(!c9b!DMF+(@<+!98!`89!#!G<'/P+!?5!`L!$5!W!`8b!#!G<'/P+!?5!7`!$5!W!`68!#!G<'/P+!?5!K8!$5!W!`66!#!G<'/P+!?5!6`L!h%D!68R!`6`!#!G<'/P+!?5!688!h%D!68R!!`67!#!G<'/P+!?5!98!h%D!68R!`6K!#!G<'/P+!?5!L8!h%D!68R!`6L!#!G<'/P+!?5!K8!h%D!68R!`6W!#!G<'/P+!?5!98^!FI<+A!c6K!3Wf:!`6V!#!G<'/P+!L]!"5D%!><'AA!788!`69!#!7]!.,2M<'O)!3%DJ!`9L`&VW:!`6b!#!T+<(!+/(!c7K!DMF+(@<+!K8!``8!#!G<'/P+!?5!6L8!h%D!68R!``6!#!G<'/P+!c6VL^!FI<+A!S68!39f:!```!#!T+<(!+/(!c6K8!$568[6W!``7!#!G<'/P+!`]!"5D%!><'AA!6L8!G<'*!G'M+!``K!#!G<'/P+!?5!`88!h%D!68R!!``L!#!G<'/P+!?5!7`!$568[6W!``W!#!G<'/P+!W]!"5D%!><'AA!W88!``V!#!G<'/P+!?5!L8!h%D!6WR!``9!#!G<'/P+!?5!K8!h%D!6WR!``b!#!9]!5$.!3S'<+:!`78!#!6]!45!68``W!U)6!36]!;D$.!$','<<+<<:!`76!#!G<'/P+!?%5!9W`9`!$5W!"TLbL!`7`!#!G<'/P+!?5688!$5W!39!f!S6W:!
d!45!68b`&6i`886!.N)+!4i!D)2PI*! dd!45!68b`&6i`886!.N)+!G! ddd!45!68b`&6i`886!.N)+!>!
1 = Aluminium 2 = Brass
Swivel Code No: D 1 2 8 0 2 4 0 1 B D 1 2 8 0 2 4 0 1 B D 1 2 8 0 2 4 0 1 B D 1 2 8 0 2 4 0 1 B D 1 2 8 0 2 4 0 1 B D 1 2 8 0 2 4 0 1 B
$-,&".
0,"
%!1
1")
'!%
%"0
5)&(!2&"#
)**)!4")4
)&)
'%!."&(,"#20+)*(,%
Letter D indicates that the product is a Swivel
01 = Viton® (FPM/FKM) 02 = Nitrile (NBR) 03 = EPDM 04 = Kalrez® (FFKM) 05 = NBR Low temp 06 = Teflon® (PTFE) 07 = Neoprene® (CR) 08 = Silicone (VMQ) 09 = Vulkollan® (PUR) 10 = Butyl (IIR) 11 = Nitrile (Gasol NBR 70 K-6) 12 = Perfluorelastomer (FFPM/FFKM) 13 = PVC / NBR 14 = Fluorsilicone rubber (FVMQ) 15 = FEP encapsulated silicone
3 = Steel 4 = Stainless steel A4 (316)
Connection one side.
Connection other side.
Material body+innerparts.
Material Seal.
Used for Extra
I%P%8.*+%4,*.E%578J%>7,&'=QL
3%P%8.*+%4,*.%5RS%>T1.U'..*=QL
;%P%8.*+%4,*.%85:%>T"+'=QL
W = Double Ball Race
Connections F./#$!+@()!3"$($.06GMaterial (Swivel body + innerparts)
?V)"=#%-%4,*.0%9*+,)"*.0
Used for extra (last letter)
NO.Revision comprises
Connection one side.
Connection other side.
For loading arm applications, contact our technical department,NOTE
How to order Swivels
E.G. Code No: D10794401A=Hose Swivel, Single ball bearing One side: 2" BSP (Female) Other side: 2" NPT (Male) Material: Stainless Steel, Flat Seal PTFE F7$)-3BG
JKWK%X'2,%6'Y%;ZFD@GGA@[=Swivel, Double ball race One side: 4" NPT (Male) Other side: Flange 3", ANSI (ASA) 150 psi Material: Stainless Steel
Letter O between connection and material indicates a short version.
Letter B between connection and material indicates a special Hose Swivel with bushring &3(D7ME(!3+(=K#&3"%(&3(MED(F7$)-3BG
12 = Perfluorelastomer (FFPM/FFKM)
16 = Hypalon® (CSM) 17 = Chemraz® 505 (FFKM) 18 = Xyflour® 860 (AFKM) 19 = Zetpol® / Therban® (HNBR) 20 = NBR 90 shore 21 = Viton®-GF (Special Viton quality) 22 = Composite 23 = Viton® GFLT-S 24 = Viton® GLT 25 = Klingerit® 26 = POM 27 = Epiclorhydrin (ECO) 28 = Viton® GFLT-S NMO 29 = FPM/FKM High Temp 31 = Viton® 90 Shore (FPM/FKM)
33 = EPDM 291 34 = Kalrez® 0040 37 = Chemraz® 510 (90 Shore) 40 = FEP PTFE encapsulated Viton® 47 = Chemraz 605 High Temp 50 = Kalrez® (PFPM) 1050LF 51 = Nylon® (PA) 61 = Viton® (FPM), FDA, USP C6 & ADI 62 = Nitrile (NBR), FDA, USP C6 & ADI 63 = EPDM, FDA, USP C6 & ADI 64 = Kalrez® (FFKM) 6230, FDA, USP C6 & ADI 66 = PTFE (Virgin), FDA 71 = FPM/FKM Low Temp 75 = FEP Silicone, FDA, USP C6 & ADI 77 = Chemraz® SD517, FDA, USP C6 & ADI 83 = EPDM BAM
8
!"#$%&"!'"&()*"+,$-,&".$/"0,"%,#%!123,1")4"$4/"'!%."!%"0/"$4/".,$4*"5)&(!2&"#,%.)**)!4")4"5%)&)46"'%!."&(,"#20+)*(,%7
SwivelsSwivel Joints
Flange facing types according to EN 1092
Type A Flat face Type B Raised face Type C Tongue Type D Groove
Type E Spigot Type F Recess Type G O-ring Spigot Type G O-ring Groove
9SwivelsSwivel Joints
!"#$%&"!'"&()*"+,$-,&".$/"0,"%,#%!123,1")4"$4/"'!%."!%"0/"$4/".,$4*"5)&(!2&"#,%.)**)!4")4"5%)&)46"'%!."&(,"#20+)*(,%7
8.*=#,%:,*01),9,=+%V%@-C
EN 1092-1
DNPN 10 PN 16 PN 25 PN 40
ØD Øk n Ød ØD Øk n Ød ØD Øk n Ød ØD Øk n Ød
20mm 105 75
414 105 75
414 105 75
414 105 75
414
inch 4.13 2.95 0.55 4.13 2.95 0.55 4.13 2.95 0.55 4.13 2.95 0.55
25mm 115 85
414 115 85
414 115 85
414 115 85
414
inch 4.53 3.35 0.55 4.53 3.35 0.55 4.53 3.35 0.55 4.53 3.35 0.55
32mm 140 100
418 140 100
418 140 100
418 140 100
418
inch 5.51 3.94 0.71 5.51 3.94 0.71 5.51 3.94 0.71 5.51 3.94 0.71
40mm 150 110
418 150 110
418 150 110
418 150 110
418
inch 5.91 4.33 0.71 5.91 4.33 0.71 5.91 4.33 0.71 5.91 4.33 0.71
50mm 165 125
418 165 125
418 165 125
418 165 125
418
inch 6.50 4.92 0.71 6.50 4.92 0.71 6.50 4.92 0.71 6.50 4.92 0.71
65mm 185 145
418 185 145
418 185 145
818 185 145
818
inch 7.28 5.71 0.71 7.28 5.71 0.71 7.28 5.71 0.71 7.28 5.71 0.71
80mm 200 160
818 200 160
818 200 160
818 200 160
818
inch 7.87 6.30 0.71 7.87 6.30 0.71 7.87 6.30 0.71 7.87 6.30 0.71
100mm 220 180
818 220 180
818 235 190
822 235 190
822
inch 8.66 7.09 0.71 8.66 7.09 0.71 9.25 7.48 0.87 9.25 7.48 0.87
125mm 250 210
818 250 210
818 270 220
826 270 220
826
inch 9.84 8.27 0.71 9.84 8.27 0.71 10.63 8.66 1.02 10.63 8.66 1.02
150mm 285 240
822 285 240
822 300 250
826 300 250
826
inch 11.22 9.45 0.87 11.22 9.45 0.87 11.81 9.84 1.02 11.81 9.84 1.02
200mm 340 295
822 340 295
1222 360 310
1226 375 320
1230
inch 13.39 11.61 0.87 13.39 11.61 0.87 14.17 12.20 1.02 14.76 12.60 1.18
250mm 395 355
1222 405 355
1226 425 370
1230 450 385
1233
inch 15.55 13.98 0.87 15.94 13.98 1.02 16.73 14.57 1.18 17.72 15.16 1.30
300mm 445 400
1222 460 410
1226 485 430
1630 515 450
1633
inch 17.52 15.75 0.87 18.11 16.14 1.02 19.09 16.93 1.18 20.28 17.65 1.30
EN 1092-1 DIN.EN 1092-1 PN 6 DIN 2631
EN 1092-1 PN 10 DIN 2632
EN 1092-1 PN 16 DIN 2633
EN 1092-1 PN 25 DIN 2634
EN 1092-1 PN 40 DIN 2635
EN 1092-1 Type B Raised Face DIN 2526 Form C
EN 1092-1 Type C Tongue DIN 2512 Form F
EN 1092-1 Type D Groove DIN 2512 Form N
EN 1092-1 Type E Spigot DIN 2513 Form V
EN 1092-1 Type F Recess DIN 2513 Form R
Ød
ØkØD
Ø D = Diameter
Ø k = Centre diameter
n = Numer of holes
Ø d = Hole diameter
Flange translation EN 1092 ---- DIN
10
!"#$%&"!'"&()*"+,$-,&".$/"0,"%,#%!123,1")4"$4/"'!%."!%"0/"$4/".,$4*"5)&(!2&"#,%.)**)!4")4"5%)&)46"'%!."&(,"#20+)*(,%7
SwivelsSwivel Joints
Ød
ØkØDØ D = Diameter
Ø k = Centre diameter
n = Numer of holes
Ø d = Hole diameter
ANSI (ASA) B 16,5
INCH150 psi 300 psi
ØD Øk n Ød ØD Øk n Ød
3/4”mm 98,4 69,8
415,9 117,5 82,5
419
inch 3 7/8 2
3/45/8 4
5/8 3 1/4
3/4
1”mm 107,7 79,4
415,9 123,8 88,9
419
inch 4 1/4 3
1/85/8 4
7/8 3½ 3/4
1 1/4”mm 117,5 88,9
415,9 133,3 98,4
419
inch 4 5/8 3½ 5/8 5
1/4 3 7/8
3/4
1 1/2”mm 127 98,4
415,9 155,6 114,3
422,2
inch 5 3 7/8
5/8 6 1/8 4½ 7/8
2”mm 152,4 120,6
419 165,1 127
819
inch 6 4 3/4
3/4 6½ 5 3/4
2 1/2”mm 177,8 139,7
419 190,5 149,2
822,2
inch 7 5½ 3/4 7½ 5 7/8
7/8
3”mm 190,5 152,4
419 209,5 168,3
822,2
inch 7½ 6 3/4 8 1/4 6
5/87/8
4”mm 228,5 190,5
819 254 200
822,2
inch 9 7½ 3/4 10 7 7/8
7/8
5”mm 254 215,9
822,2 279,4 234,9
822,2
inch 10 8½ 7/8 11 9 1/4
7/8
6”mm 279,4 241,3
822,2 317,5 269,9
1222,2
inch 11 9½ 7/8 12½ 10 5/8
7/8
8”mm 342,9 298,4
822,2 381 330,2
1225,4
inch 13½ 11 3/4
7/8 15 13 1
10”mm 406,4 361,9
1225,4 444,5 387,3
1628,6
inch 16 141/4 1 17½ 15
1/4 1 1/8
12”mm 482,6 431,8
1225,4 520,7 450,8
1631,7
inch 19 17 1 20½ 17 3/4 1
1/4
T.T.M.AINCH ØD Øk n Ød
2”mm 114,3 95,3 6 11,1
inch 4.50 3.75 0.44
3”mm 142,9 123,8 8 11,1
inch 5.63 4.87 0.44
4”mm 168,3 149,2 8 11,1
inch 6.63 5.87 0.44
5”mm 196,9 177,8 12 11,1
inch 7.75 7.00 0.44
6”mm 228,6 206,4 12 11,1
inch 9.00 8.13 0.44
8”mm 276,2 257,2 16 11,1
inch 10.87 10.13 0.44
TW DIN 28459DN ØD Øk n Ød
TW1 50mm 154 130 8 11
inch 6.06 5.12 0.43
TW1 80mm 154 130 8 11
inch 6.06 5.12 0.43
TW3 100mm 174 150 8 14
inch 6.85 5.91 0.55
TW5 125mm 204 176 8 14
inch 8.03 6.93 0.55
TW7 150mm 240 210 12 14
inch 9.45 8.27 0.55
8.*=#,%:,*01),9,=+%V%C-C
11SwivelsSwivel Joints
!"#$%&"!'"&()*"+,$-,&".$/"0,"%,#%!123,1")4"$4/"'!%."!%"0/"$4/".,$4*"5)&(!2&"#,%.)**)!4")4"5%)&)46"'%!."&(,"#20+)*(,%7
Metric
Size 8.8M8 24 Nm
M10 50 Nm
M12 85 Nm
M16 210 Nm
M20 410 Nm
M22 550 Nm
M24 700 Nm
Inch
Size A193 B75/16 -18 UNC 16 lbf-ft
3/8 -16 UNC 29 lbf-ft
1/2 -13 UNC 70 lbf-ft
5/8 -11 UNC 139 lbf-ft
3/4 -10 UNC 243 lbf-ft
7/8 -9 UNC 389 lbf-ft
1 -8 UNC 582 lbf-ft
Mounting instruction
a. !"#$%"&'("&)*+,*-./-&*/0&'("&1*/-"&&)2$'"+'.$/
34&&5("+,&'("&+$6)7./-&8$2&0*#*-"9&3"8$2"&#$6/'./-4
+4&&:$&)2"%"/'&0*#*-"9&062./-&#$6/'./-&*&96.'*37"&;2"/+(&9($670&3"&69"0&8$2&'("&./'"/0"0&3$7'9&*/0&/6'94
04&&</962"&'(*'&'("&)2$06+'&7./"&.9&"#)'=&*/0&*77&%*7%"9&*2"&+7$9"
&&&&&3"8$2"&=$6&+$//"+'&'("&+$6)7./-&./'$&'("&7./"4
"4&&>"'&./&*77&3$7'9&?29'&*/0&'.-('"/&'("#&3=&(*/04&:("/&./+2"*9"&'("&'.-('"/./-&'$2@6"&./&A&&9'")9&6)&'$&'("&&
&&&&&2"+$##"/0"0&%*76"&./&'("&8$77$;./-&'*37"4&B2$+""0&"%"2=&'.#"&*++$20./-&'$&'("&9"@6"/+"&9($;/&./&-4
84&&:.-('"/./-&'$2@6"1)&8$2&3$7'9C
The Mann-Tek product can be installed directly in the product line and is ready for use after
removing the transport protection. The installation is recommended as follows:
-4&&D$7'&'.-('"/./-&9"@6"/+"4
E("/&./9'*77./-&F*//&:",&"@6.)#"/'&'$&/";&).)"&;$2,G&'*/,9G&"'+4&"/962"&'("&9=9'"#&.9&82""&82$#&0"32.9&'(*'&
#*=&3"&'2*/98"22"0&'(2$6-(&'("&+$6)7./-4&E("2"&'("&($9"&$2&7$*0./-&*2#&*99"#37=&.9&'("&)2.#*2=&9'*'.+&0.9-
9.)*'.$/&$2&"*2'(&2$6'"G&'("&"7"+'2.+*7&+$/'./6.'=&%*76"&$8&'("&*99"#37=&9(*77&3"&+("+,"0&'$&"/962"&2"-67*'$2=&
+$#)7.*/+"4&>)"+.*7&*''"/'.$/&9($670&3"&)*.0&'$&'("&3*7*/+./-&$8&7$*0./-&*2#94&:("&;".-('&$8&'("&+$6)7./-&
)769&'2*/98"2&#"0.*&9($670&3"&'*,"/&./'$&*++$6/'&*'&'("&9)"+.?+*'.$/&9'*-"4&H'&.9&696*7&8$2&7$*0./-&*2#&3*-
7*/+"&9"''./-9&'$&*++$6/'&$8&;".-('&%*2.*'.$/9&06"&'$&0.88"2"/+"9&./&'("&8677&I&"#)'=&+=+7"4
:("&7$*0./-&*2#&9($670&3"&9"'&'$&3*7*/+"&./&'("&+$/0.'.$/&)2"9"/'&*'&'("&'.#"&$8&+$//"+'.$/4&J$2&"K*#)7"G&
9($670&'("&7$*0./-&*2#&3"&"#)'=&*'&'("&'.#"&$8&+$//"+'.$/&'("/&.'&9($670&3"&3*7*/+"0&./&'("&"#)'=&+$/0.'.$/4
:("&9'*2'L6)&#*=&'*,"&)7*+"&$/7=&;("/&'("&F*//L:",&)2$06+'&(*9&3""/&#$6/'"0&*9&./9'26+'"0&*/0&'("
/"+"99*2=&86/+'.$/&'"9'9&*/0&7"*,&'"9'9&(*%"&3""/&+$/06+'"0&3=&'("&*))2$%"0&*6'($2.'."94
1) :("&'$2@6"&8$2+"9&2"+$##"/0"0&3*9"9&$/&*&'(2"*0&82.+'.$/&+$"8?+."/'&MNOGPQ&*/0&*&9'*/0*20&1*'&9"*7&
*++$20./-&'$&<R&PSPQLP
&3 '"0& &. '2
1
23
4
1
2
3
45
6
7
8
4 Bolt Pattern8 Bolt Pattern
12 Bolt Pattern
1
2
3
4
5
6
7
8
129
1011
Flange Connection
12
!"#$%&"!'"&()*"+,$-,&".$/"0,"%,#%!123,1")4"$4/"'!%."!%"0/"$4/".,$4*"5)&(!2&"#,%.)**)!4")4"5%)&)46"'%!."&(,"#20+)*(,%7
SwivelsSwivel Joints
BSP
The threads are parallel with &*+%0,*."=#%01)\*],K% This allows to use the full thread length for screwed-on parts. The largest possible transfer of force is guaran-teed for short length. The thread seal behind the relief groove of the thread cannot drop out.
Simple screwing down, makes a safe connection. Subsequent tightening during operation is pos-sible at any time. Change of seal and new as-sembly do not require any expert knowledge. The European standardisations for hose assemblies #$L*&#$(5!#!22$2( ./#$!+%(N&./()!.(%$!2%@(<$0!*%$(-,( ./$(advantages.
About NPT and BSP threads
NPT Sealing NPT threads can be an exasperating experience if certain techniques are not fol-lowed. The following tips will help alleviate many common problems in thread sealing:
Thread Seal
Figure BSP
1. Always use some type of sealant (tape or paste) and apply sealant to male thread only. If using a hydraulic %$!2!3.@( !22-N( %*,40&$3.( 0*#&3"( .&1$( <$,-#$( %H%.$1( &%(pressurized.
2. When using tape sealant, wrap the threads in a clock-N&%$(1-.&-3(%.!#.&3"(!.(./$(4#%.(./#$!+(!3+@(!% layers are applied, work towards the imperfect (vanis-hing) thread. If the system that the connection being made to cannot tolerate foreign matter (i.e. air systems), 2$!'$(./$(4#%.(./#$!+($O5-%$+(!3+(!552H(./$(.!5$sealant as outlined above.
3. When using paste sealant, apply to threads with a brush, using the brush to work the sealant into the ./#$!+%6(:552H($3-*"/(%$!2!3.(.-(422(&3(!22(./$(./#$!+%(!22(the way around.
4. When connecting one stainless steel part to another stainless steel part that will require future disassembly, use a thread sealant that is designed for stainless steel. This stainless steel thread sealant is also useful when connecting aluminium to aluminium that needs to be dis-connected in the future. These two materials gall easily, and if the correct sealant is not used, it can be next to impossible to disassemble.
5. When connecting parts made of dissimilar metals (i.e. steel and aluminium), standard tape or paste sealant per forms satisfactory.
DK For sizes 2” and below, tape or paste performs satis-factory. When using thread tape, four wraps (covering all 3$0$%%!#H(./#$!+%G(&%(*%*!22H(%*,40&$3.6
7. For sizes 2½” and above, thread paste is recommen-ded. If thread tape is used, eight wraps (covering all ne-0$%%!#H(./#$!+%G(&%(*%*!22H(%*,40&$3.6(:552H(1-#$(N#!5%(if necessary.
8. For stubborn to seal threads, apply a normal coating of thread paste followed by a normal layer of thread tape.
9. For extremely stubborn to seal threads, apply a nor-mal coating of thread paste followed by a single layer of gauze bandage followed by a normal layer of thread tape.
Caution!
When this procedure is done, the connection becomes permanent. Extreme measures will be necessary to dis-connect these components. All other measures to seal the threads should be explored prior to use of this tech-nique.
10. Over-tightening threads can be just as detrimental !%(&3%*,40&$3.(.&"/.$3&3"6(M-#(%&P$%(QR(!3+(<$2-N@(/!3+(tighten the components and, with a wrench, tighten 3 full turns. For sizes 2½” and above, hand tighten the compo-nents and, with a wrench, tighten 2 full turns.
PTFE-tape
Figure NPT
13SwivelsSwivel Joints
!"#$%&"!'"&()*"+,$-,&".$/"0,"%,#%!123,1")4"$4/"'!%."!%"0/"$4/".,$4*"5)&(!2&"#,%.)**)!4")4"5%)&)46"'%!."&(,"#20+)*(,%7
Flat Seals for thread
weight
S9"
Thread
BSP
Materials
Application
Dimensions
^%99
Product
No
D d s
0,001 BSP ½” D7ME(F(7$)-3BG
white , massive
continuously hard,
universally resistant
7,&'=® is a registered
trademark of DuPont
20 13 2 On request
0,001 BSP 3/4” 26 19 2 1498-06
0,002 BSP 1” 33 24 2 1220-06
0,003 BSP 1 1/4” 42 34 2 1536-06
0,003 BSP 1 ½” 48 39 2 1196-06
0,004 BSP 2” 60 49 2 1052-06
0,007 BSP 2 ½” 76 63 2,5 1181-06
0,006 BSP 3” 88 77 3 1110-06
0,009 BSP 4” 114 100 3 1295-06
0,016 BSP 6” 164 150 3 1963-06
0,001 BSP ½” Thermopac
asbestos free, light
hard. Especially
for hot oils and hot
bitumen up to 250º C
and for hot water and
saturated steam up
to 25 bar.
20 13 2 On request
0,001 BSP 3/4” 26 19 2 1498-25
0,002 BSP 1” 33 24 2 1220-25
0,002 BSP 1 1/4” 42 34 2 1536-25
0,003 BSP 1 ½” 48 39 2 1196-25
0,004 BSP 2” 60 49 2 1052-25
0,005 BSP 2 ½” 76 63 3 1181-25
0,009 BSP 3” 88 77 3 1110-25
0,013 BSP 4” 114 100 3 1295-25
0,016 BSP 6” 164 150 3 1963-25
0,001 BSP 1/2” FPM/FKM (Viton®)
soft for aromatic
hydrocarbons and
hot oils.
Viton® is a registered
trademark of DuPont
20 13 2 On request
0,001 BSP 3/4” 26 19 2 1498-01
0,002 BSP 1” 33 24 2 1220-01
0,002 BSP 1 1/4” 42 34 2 1536-01
0,003 BSP 1 ½” 48 39 2 1196-01
0,004 BSP 2” 60 49 2 1052-01
0,006 BSP 2 ½” 76 63 3 1181-01
0,008 BSP 3” 88 77 3 1110-01
0,014 BSP 4” 114 100 3 1295-01
0,016 BSP 6” 164 150 3 1963-01
0,001 BSP 3/4” 5RS%>T1.U'..*=QL
Flat seals type of
polyurethane, hightly
resitant to abrasion,
non-toxic. Shore
hardness=900 . For
all petroleum based
products and many
solvents. Colour:Blue
T1.U'..*=Q is a registe-
red trademark of Bayer
26 19 2 1498-09
0,001 BSP 1” 33 24 2 1220-09
0,001 BSP 1 1/4” 42 34 2 1536-09
0,002 BSP 1 ½ ” 48 39 2 1196-09
0,003 BSP 1 3/4” 54 44 2,5 On request
0,003 BSP 2” 60 49 2 1052-09
0,005 BSP 2 ½ ” 76 63 2,5 1181-09
0,006 BSP 3” 88 77 3 1110-09
0,010 BSP 3½” 100 80 3 On request
0,009 BSP 4” 114 100 3 1295-09
0,012 BSP 5” ( No std) 140 124 3 On request
0,016 BSP 6” 164 150 3 1963-09
D
d
s
D
d
s
D
d
s
;-3+$+(4<#$(1!.$#&!2
D
d
s
14
!"#$%&"!'"&()*"+,$-,&".$/"0,"%,#%!123,1")4"$4/"'!%."!%"0/"$4/".,$4*"5)&(!2&"#,%.)**)!4")4"5%)&)46"'%!."&(,"#20+)*(,%7
SwivelsSwivel Joints
8.*=#,%4+*=2*)2%-%41"+*_.,%\')
Dimensions S(11
Product
No
D d Øk Øh s
DN 25 PN 10/16 108 78,5 91 4 x 6,5 2 -
DN 32 PN 10/16 140 43 100 4 x 18 2 -
DN 50 PN 6 140 61 110 4 x 15 2 -
DN 50 TW 1 154 50 130 8 x 12 2 -
DN 80 TW 1 154 90 130 8 x 12 2 -
DN 50 PN 10/16 165 61 125 4 x 18 2 -
DN 100 TW3 174 110 150 8 x 14 2 -
DN 65 PN 10/16 185 76 145 4 x 18 2 -
DN 80 PN 10/16 200 90 160 8 x 18 2 -
DN 125 TW5 204 135 176 8 x 14 2 -
DN 100 PN 10/16 220 115 180 8 x 18 2 -
DN 150 TW7 240 160 210 12 x 14 2 -
DN 125 PN 10/16 250 141 210 8 x 18 2 -
DN 150 PN 10/16 280 169 240 8 x 22 2 -
DN 200 PN 10 340 220 295 8 x 22 2 -
DN 200 PN 16 340 220 295 12 x 22 2 -
s
Dd
kØ
Øh
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
On
req
ue
st
Flange Seals
MATERIAL:ELAPAC- FD is a three component mixture, made of
RUBBER (NBR) vulcanised, for the adhesion and resis-
tance to kinking.
CORK for compressibility and sealing capability.
T/$3(.&"/.$3&3"(./$()!3"$(%$!2(+-$%(3-.(1-'$(.-N!#+%(
./$(-*.$#(-#(&33$#($+"$(-,(./$(%$!2&3"(,!0$%67/$()!3"$(
seal does not ”settle,” and can be re-used in most cases.
FIBRES give the material the necessary rigidity
!3+(./$(%.!<&2&.H(.-(&3%$#.()!3"$(%$!2%(&3.-(3!##-N("!5%(
from the side. The values for swelling are considerably
2-N$#(,-#(4<#$(#$&3,-#0$+(1&O.*#$%(./!3(,-#(52!&3(#*<<$#(
seals.
Further advantages: No leaching out of softening
agents. No shrinking or hardening through drying. No
&3)*$30$(-3(-#(+&%0-2-#!.&-3(-,(1$+&!6(J-(/!#+$3&3"(!.(
temperature range of -25 o up to +70o Celsius. No stick-
&3"(-3()!3"$6(:++&.&-3!2(R!+/$%&'$%R(!#$(3-.(3$0$%%!#H6(
– Therefore good reusability.
RESISTANCE:7/$(+$.!&2%(#$,$#(.-(4..$+()!3"$(%$!2%6(=32H(./$(&33$#(#&1(
-,(./$()!3"$(%$!2(&%(&3(0-3.!0.(N&./(./$(1$+&*16(I3(./$(
event of a possible attack this would only result in low
5$3$.#!.&-3(!3+(./$(*%$(&%(%.&22(5-%%&<2$6(I,(./$()!3"$(%$!2(
is completely immerged in the medium during
laboratory tests, swelling and loss of stability is of course
higher. If the resistance of ELAPAC(&%(3-.(%*,40&$3.(<*.(
good compressibility is required, we offer the special de-
sign ”TM” seal which is PTFE encapsulated.
Application of foodstuffs: ELAPAC-FD is only suitable
N&./(D7MEK0-'$#@(-./$#N&%$(1&O.*#$(5!#.&02$%(0!3(&3)*-
ence the quality of the foodstuffs.
APPLICATION::%(!3($2!%.&0()!3"$(%$!2(,-#(.!39(.#*09(!3+(.!39(52!3.(
construction etc., where rough sealing surfaces require
!(/&"/(!+!5.!<&2&.H@(N/$#$()!3"$(%$!2%(%/-*2+(%.&22(/!'$("--+(
)$O&<&2&.H(.-(!'-&+(5&5$(,#!0.*#$%(-#(%&152$(%$!2&3"(1!.$#&!2%(
because little or no force can be used to tighten the joint. Not
suitable for use as thread seal, because the material is too
soft and does not have enough lateral strength, this allows
the medium to attack the seal material. Also not suitable for
!552&0!.&-3%(N/$#$(./$()!3"$(%$!2(&%(-32H(%L*!%/$+(-3(Q(
mm to 3 mm of the total width. Care should be taken not to
squash the material to much especially the 2 mm material, if
in doubt please use the 3 mm material.
GAS IMPERMEABILITY :C*$(.-(./$(4<#$(0-3.$3.(-,(EU:D:VW("!%(5$#1$!<&2&.H(&%(.-(<$(
expected when using seals with narrow width – especially at
high vacuum operation.
APPROVALS::55#-'$+(!%()!3"$(%$!2&3"(1!.$#&!2(,-#(!22(,*$2%(!3+(2*<#&-
cants by the German military and the major oil companies
,-#(.!39(.#*09%@(#$43$#&$%(!3+(!�#!,.(#$,*$22$#%6(:55#-'$+(&3(
3 mm thickness by the German railway (Mat. No. 150.309).
ELAPAC-FD meets the DIN 28 463.
TECHNICAL DATA:hardness, Shore A 86 ± 3
tensile strength longitudinal 10 N/mm2
lateral 4,5 N/mm2
elongation at break longitudinal 15 N/mm2
lateral 70 N/mm2
compressibility 75 %
recovery 90 %
compression set 24h, 700 C 40 %
tear resistance longitudinal 7 N/mm2
lateral 10 N/mm2
working pressure maximal 25 bar
colour blue
marking print ELAPAC-FD
15SwivelsSwivel Joints
!"#$%&"!'"&()*"+,$-,&".$/"0,"%,#%!123,1")4"$4/"'!%."!%"0/"$4/".,$4*"5)&(!2&"#,%.)**)!4")4"5%)&)46"'%!."&(,"#20+)*(,%7
O-ring materials
DesignationTrade
nameISO 1629
ASTM
1418
Temp
Range oCField of Application
Nitrile
Butadiene
Rubber
Buna N®
Europrene N®
Hycar®
Nipol N®
Perbunan N®
NBR NBR -45 110 Standard material for hydraulics and pneumatics. !"#$%&'()"'*+&,$-(./-%&'"0(12"-,3(&#"4&'(&#-(5$6$7&-ble oils and fats. Flame retardant liquids. Aliphatic ./-%)0&%+)#,(89%)9.&#$3(+27&#$3(9$7%)':;(<"'"0)#$()"',(&#-(6%$&,$,;(=&7$%(29(7)(>?@A;(B")()"',(4&-$(C%)4(,/#7.$7"0($,7$%,(&#-(5$6$7&+'$()"',
Ethylene-
Propylene-Diene
Rubber
Dutral
Keltan®
Vistalon®
Buna AP®
EPDM EPDM -55 120 D)7(E&7$%3(5&9)2%3(+%&F$(12"-,3(-$7$%6$#7,;(G'0).)',3(F$7)#,3($#6"#$(0))',3(1&4$(%$7&%-(9.),9.&7$*+&-,$-('"H2"-,3()%6&#"0(&#-("#)%6&#"0(&0"-,(&#-(+&,$,;(I)7(resistent to mineral oils
Fluoroelastomer Fluorel®
J$0.#)1)#K
Viton®
FPM FKM -20 200 !"#$%&'()"'(&#-(6%$&,$,;(G'"9.&7"03(&%)4&7"0(&#-(0.')%"#&7$-(./-%)0&%+)#,3(9$7%)'3(LL()07&#(9$7%)'3(-"$,$'(C2$',3(1&4$(%$7&%-(9.),9.&7$+&,$-('"H2"-,;(<"'"0)#$()"',(&#-(6%$&,$,(&0"-,3(M/$,
Fluorosilicone
Elastomer -
MFQ FVMQ -60 200 !"#$%&'()"',3(C2$',;('2+%"0()#(N"*O,7$%(+&,",3(.)7(&"%;
Silicone Silastic®
Silopren®
MVQ VMQ -60 200 !"#$%&'()"',3(C2$',;('2+%"0()#(N"*O,7$%(+&,",3(.)7(&"%;
D/-%)6$#&7$-
Nitrile-
Butadiene
Rubber
Therban®
Tornac®
Zetpol®
HNBR** HNBR** -35 120 !"#$%&'()"'*+&,$-(./-%&'"0(12"-,3(&#"4&'(&#-(5$6$7&+'$(C&7,3(&'"9.&7"0(./-%)0&%+)#,3(-"$,$'(C2$',3()P)#$3(,)2%(6&,3(-"'27$(&0"-,(&#-(+&,$,( !"#$%&'()"'*+&,$-(./-%&'"0(12"-,3(&#"4&'(&#-(5$6$7&+'$(C&7,3(&'"9.&7"0(./--%)0&%+)#,3(-"$,$'(C2$',3()P)#$3(,)2%(6&,3(-"'27$(&0"-,(and bases
Butyl Rubber Exxon Butyl®
Polysar Butyl®
MMQ MMQ -55 100 B27/'(",(&(0)9)'/4$%()C(",)+27/'$#$(&#-(",)9%$#$;(M7(.&,('&%6$'/(+$$#(%$9'&0$-(+/($7./'$#$(9%)9/'$#$(C)%(R*%"#6(2,&6$;(B27/'(",(%$,",7(7)(7.$(,&4$(12"-(7/9$,(&,(($7./'$#$9%)9/'$#$(&#-($S0$97(C)%(%$,",7�$(7)(6&,(9$%4$&7")#3("7(",(,)4$E.&7("#C$%")%(7)($7./'$#$*9%)9/-'$#$(C)%(R*%"#6(,$%5"0$;((OS0$''$#7(E$&7.$%(%$,",7�$3(&#-(6&,(9$%4$&7")#(%$,",7�$;(T))%(9$7%)'$24()"'(&#-(fuel resistance.
T$%12)%"#&7$-(
Elastomer
@DO!QGUK
V&'%$PK
PERLAST®
FFPM FFPM -40 260 B$,7(0.$4"0&'(%$,",7�$()C(&''($'&,7)4$%,3("#0'2-"#6()%6&#"0(&0"-,3(C;";(&0$7"0(&0"-3(+$#P)"0(&0"-3(C)%4"0(&0"-
@.')%)9%$#$(
Rubber
Baypren®
Neoprene®
@Q @Q -40 120 Q$,",7(7)(%$C%"6$%,3(&44)#"&3(0&%+)#(-")S"-$3(C%$)#8QWX3QWY3QXW3QXX3QWWY*QWWZ:3(,"'"0)#$()"',3(E&7$%3()S/6$#8')E*9%$,;:3(+'$&0.$,3(0)2,7"0(,)-&3(&'0).)',3(0.')%"#$3()P)#$3(0&,7)%()"'(&#-(5$6;()"',;([)E(resistance to mineral oils!
Polyester / Polyether
Urethane Rubber
Adiprene®
Urepan®
\2'F)''&#K
Desmopan®
AU
EU
PUR
AU
EU
-40 100 !"#$%&'()"',(&#-(6%$&,$,3()S/6$#3()P)#$;(D]G(&#-(D]B(12"-,3(&"%;
I)7(%$,",7("#($,7$%,3(&'"9.&7"03(&%)4&7"0(&#-(0.')%"#&-7$-(./-%)0&%+)#,3(0)#0$#7%&7$-(&0"-,(&#-('/$,3(E&7$%(&+)5$(^Z?A@;
T)'/7$7%&12)%)$7./'$#$( J$1)#K( PTFE PTFE -200 260 TJ]O(",(2,$-(E.$%$5$%(7.$(0.$4"0&'(&#-(7.$%4&'(%$-,",7�$()C(7.$(#)%4&'($'&,7)4$%(",(#)(')#6$%(,2C_0"$#7;(These are primarily applications in the chemical indu-,7%/3(C))-,72CC,("#-2,7%/3(9.&%4&0$27"0&',(&#-(4$-"0&'(7$0.#)')6/;(TJ]O(&%$(2,$-()#'/(&,(,7&7"0(,$&',3($;6;()#(1$(0)##$07")#,3()#(0)5$%,3(;$70;(
Fluorinated Ethylene
Propylene
J$1)#(]OTK FEP/MVQ FEP/VMQ -60 200 ]OT(",(2,$-(E.$%$5$%(7.$(0.$4"0&'(&#-(7.$%4&'(%$,",-7�$()C(7.$(#)%4&'($'&,7)4$%(",(#)(')#6$%(,2C_0"$#7;(These are primarily applications in the chemical indu-,7%/3(C))-,72CC,("#-2,7%/3(9.&%4&0$27"0&',(&#-(4$-"0&'(7$0.#)')6/;(FEP/FPM FEP/FKM -20 200
T$%1)2%&'F)S/ J$1)#(T]GK PFA/MVQ PFA/VMQ -60 250 T]G(",(2,$-(E.$%$5$%(7.$(0.$4"0&'(&#-(7.$%4&'(%$,",-7�$()C(7.$(#)%4&'($'&,7)4$%(",(#)(')#6$%(,2C_0"$#7;(These are primarily applications in the chemical indu-,7%/3(C))-,72CC,("#-2,7%/3(9.&%4&0$27"0&',(&#-(4$-"0&'(7$0.#)')6/;(
PFA/FPM PFA/FKM -20 250
J$7%&12)%)$7./'$#$*
Propylene
@)9)'/4$%(O'&,7)4$%
G1&,K —- TFE / P** -25 200 !"#$%&'()"',(&#-(6%$&,$,3(+%&F$(12"-,3(C2$',3(&'0).)',3(.$&7(7%&#,C$%(4$-"&3()"',;(&4"#$,3(&0"-,3(+&,$,
A&.-3B(FMD8G(!3+(7$)-3B(FMD8XYD8G(!#$(#$"&%.$#$+(.#!+$1!#9%(-,(C*D-3.@(C*D-3.(E2!%.-1$#%6(Vulkollan® is registered trademark of Bayer AG
Product Information
Art. nr: PR-010601-0112 Version: 130318
DACouplings®
Dry Aviation Couplings
Sweden
Contact Mann Tek for your local distributor
Phone: +46 501 39 32 00
Fax: +46 501 39 32 09
Email: [email protected]
Web site: www.mann-tek.com
Address: Mann Teknik AB
Strandvägen 16
SE-542 31 Mariestad
Sweden
www.mann-tek.com !"##$%&'()*("(+&,-).&/(0123445$+678"#9:
Your distributor
Product Information
DDCouplings®
;,9(;)*+6##&+-(<6=8>)#?:
5@(-6(A@B(CD(5E($(CD(FG:(H>=7)#)=7B(I,"**$
J=#7&-">B(1-")#>&**(1-&&>("#/(CKKL:(2-M&,(
7"-&,)">*(6#(,&N=&*-:(H++6,/)#?(-6(DH%2(
standard STANAG 3756.
Full Flow - ballvalvesF@(-6(O@B(CD(54B(H>=7)#)=7:
I">>P">P&("#/(F$Q"9(I">>P">P&:
!"/&(R6,(C&-,6>&=7(%"#'(%,=+'*:(S",)"-
-)6#*(6R(T"#?&(
connections.
DGCouplings®
;,9(J"*(<6=8>)#?:
1" to 8", PN25. Stainless steel.
2-M&,(7"-&,)">*(6#(,&N=&*-:(
Product Information
Sweden
FFBall ValvesFull Flow Ball Valves
Art. nr: PR-010201-0112 Version: 111128
DACouplings, ;,9(HP)"-)6#(<6=8>)#?:(
FU@B(CD(54:(!")#(V6/9()#(H>=7)#)=7:
Standards:(012(OGB(!1(FOOAOB(DH%2(
STANAG 3105, I,)-)*M(H&,6*8"+&(18&+:(F<5O:
Sampling, Vent
or Drain unit Stainless Steel SS-EN 10 088-1.4404+AT
WH010(X5EYZ:((I">>(S">P&()#(5:4E53("#/(5:OX45
Sa
orSt
WH
AviationFuelling Equipment
Art. nr: PR-021001-0121 Version: 130507
Sampling, Vent
or Drain unit
Product Information
Sweden
Business Segment Information
Swivel joints¾" to 10", PN 10 - PN 25.
H>=7)#)=7B(I,"**$J=#7&-">B(
Stainless Steel.
2-M&,(7"-&,)">*(6#(,&N=&*-:
<6##&+-)6#[(I1CB(DC%:(\>"#?&/(+6##&+-)6#(
W;0DB(HD10]H1H(&:-:+ZArt. No: PR-010501-0112 Version: 131126
SwivelsSwivel Joints
Product Information
Sweden
SBCouplings,
bolt seriesIndustrial and Marine Safety Break-away, breaking bolts,
H>=7)#)=7B(I,"**B(1-")#>&**(1-&&>B(5@(-6(5F@B(R&7">&]7">&(-M,&"/*("#/(Q)-M(T"#?&*B(Q)-M(V,&"')#?(V6>-*:
Safety Break-away, cable release
1-")#>&**(1-&&>B(CD54(](CD(FG:(F@(-6(O@B(R&7">&(-M,&"/*:(6@(-6(5F@B(T"#?&/(+6##&+-)6#
Gas (LPG)
SwivelsSwivel Joints
SBCouplings®
Safety Break-away Couplings
DGCouplings®
Dry Gas Couplings
Sweden
Version 091012
Offshore & Marine
DDCouplings®
Dry Disconnect Couplings SwivelsSwivel Joints
SBCouplings®
Safety Break-away Couplings
Offshore & MarineOffshore & MarineOffshoOffshoOffshoOffshoOffshoOffshore & Mre & Mre & Mre & Marinere & Marinearinearinearinearine
DDCouplingDDCouplingDDCouplingDDCouplingDDCouplingDDCouplingDDCouplingDDCouplingDDCouplingDDCouplingDDCouplingDDCouplingssDDCouplingDDCouplingDDCouplingDDCouplingDDCouplingDDCouplings®
Dry Disconnect Couplings Dry Disconnect Couplings SwivelsSwivelsSwivelsSwivelsSwivelsSwivelsSwivelsSwivelsSwivel JointsSwivel Joints
SBCouplingSBCouplingSBCouplingSBCouplingSBCouplingSBCouplingSBCouplingSBCouplingSBCouplingSBCouplingSBCouplingSBCouplingSBCouplingssSBCouplingSBCouplingSBCouplingSBCouplingsSBCouplingSBCoupling®
Safety Break-away Couplings
Sweden
Rail Tankers Rail Tankers Rail Tankers Rail TaRail TaRail TaRail TaRail TaRail Tankers Rail Tankers nkers nkers nkers nkers
Sweden
SwivelsSwivel Joints
SBCouplings®
Safety Break-away Couplings
DDCouplings®
Dry Disconnect Couplings
J"*(WYCJZ Rail tankers
ServiceApproval InformationCompany Information
^=">)-9B(_&">-MB(1"R&-9("#/(
K#P),6#7&#-(C6>)+9:(
^=">)-9(H88,6P">*B(
C,6/=+-(H88,6P">*("#/(
;&+>","-)6#(6R(<6#R6,7)-9
J&#&,">(0#R6,7"-)6#(
"V6=-(!"##(%&'B(
8,6/=+-*("#/(I=*)#&**(
Segments
<M&7)+">( )#/=*-,9
2RR*M6,&( & Marine
%"#'(-,=+'*((((
Military Military Military MilitarMilitarMilitarMilitarMilitarMilitarMilitary Military
Sweden
SwivelsSwivel Joints
SBCouplings®
Safety Break-away Couplings
DDCouplings®
Dry Disconnect Couplings
Version 100113
!)>)-",9((((
Container Container Container ContainContainContainContainContainContainContainer Container er
Sweden
SwivelsSwivel Joints
SBCouplings®
Safety Break-away Couplings
DDCouplings®
Dry Disconnect Couplings
Version 100113
<6#-")#&,((
Service
)#*-,=+-)6#*(
"#/(68&,"-)6#(
7"#=">*
%"%"%"#'#'#'(-(-(-,=,=+'+'+'*(*(
Tank Trucks Tank Trucks Tank Trucks Tank TrTank TrTank TrTank TrTank TrTank Trucks Tank Trucks ucks ucks ucks
Sweden
SwivelsSwivel Joints
SBCouplings®
Safety Break-away Couplings
DDCouplings®
Dry Disconnect Couplings
Version 100113
Sweden
Version 130113
DDCouplings®
Dry Disconnect Couplings
Technical Information
Cryogenic CouplingsCryogenic CouplingsCryogenic CouplingsCryogeCryogeCryogeCryogeCryogeCryogenic CoCryogenic Conic Conic Conic Conic Couplingnic Couplinguplinguplinguplinguplinguplingsuplings
Sweden
Version 120927Version 120927
<,96?&#)+ <6=8>)#?*
Address: !"#$%&
Your distributor:
General InformationGeneral InformationGeneral InformationGeneraGeneraGeneraGeneraGeneraGeneral InfoGeneral Infol Infol Infol Infol Informatiormatiormatiormatiormatiormationrmation
Sweden
Art. nr.: PR-091901-01 Version: 130415