OVERSIZE BEARING BIT

DIAMOND SHARPENING

NEWDIAMOND

SHARPENING TAPERED FILES

MEASURING & MARKING

VARIJIG CLAMP GUIDES

COMBINATION ROUTER BASE

Ideal for flattening chisels and plane blades as well as achieving a shaving edge in seconds.

Fine 1000 grit (15 micron) and coarse 300 grit (50 micron) monocrystalline diamond, grades clearly marked.

The 1000 grit is ideal for a fine finish on carving tools.

Substrate pre-ground to +/- 0.0005 for precision flatness.

Guaranteed for five years when used with Trend lapping fluid. Lapping fluid prevents clogging and rusting and it helps keep diamond stone clean.

Complete with cleaning block and non slip mat.

Ideal for sharpening HSS and carbide inserts.

6 X 2 BENCH STONEDouble-sided site and work bench stone.

U*DWS/W6/FCProduct Ref.

8 x 3 classic professional stone.

Ideal for up to 3 inch plane irons and chisels.

Unique clearance channels produce faster, cleaner cut.

Substrate pre-ground to +/- 0.0005 for precision flatness.

Continual diamond surface on fine side prevents snagging when sharpening small or pointed tools.

Complete with pouch, cleaning block and non slip mat.

Fine 1000 grit (15 micron) and coarse 300 grit (50 micron) monocrystalline diamond.

Grits are clearly marked on the stone.

Guaranteed for five years when used with Trend lapping fluid. Lapping fluid prevents clogging and rusting and it helps keep diamond stone clean.

Combination of unique clearance channels (300 grit) and continual diamond surface (1000 grit).

8 X 3 CLASSIC PROFESSIONAL STONEDouble-sided site and workshop bench stone.

U*DWS/CP8/FCProduct Ref.

Every woodworker should have one of these.

- Michael Hosaluk, Artist & Maker-

DIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENING

1

Every woodworker should Every woodworker should

I used the 300 grit side of the bench stone, again the results were exceptional & I have tried using the 1000 grit side on a spindle gouge doing some fi nishing work and I am well pleased! I like this stone very much.

- Morris Schlesinger, Professional Woodturner & Master Woodworker -

DIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENING

Precision quality taper file.

Fine 400 grit (40 micron) monocrystalline diamond.

Guaranteed for five years.

Split plastic contoured hand-grip which is pinned either side of blade.

Handle 1/2 inch thick by 2-1/2 inch long.

Hanging hole on handle.

Suitable for woodturning gouge internal and external bevel edges, skews, carving tools, model engineering, routers, saw blades, small chisels, knives, serrated edges, metals and plastics, pruners, shears and all shaped tooling.

Precision quality taper file.

Fine 600 grit (25 micron) monocrystalline diamond.

Guaranteed for five years.

Split plastic contoured hand-grip which is pinned either side of blade.

Handle 7/16 inch thick by 2-1/2 inch long.

Hanging hole on handle.

Suitable for woodturning gouge internal and external bevel edges, skews, carving tools, model engineering, router bits, saw blades, small chisels, knives, serrated edges, metals and plastics, pruners, shears and all shaped tooling.

Fine 600 grit (25 micron) & 300 grit (50 micron) monocrystalline diamond.

Guaranteed for five years.

Diamond is electroplated onto a steel substrate which is molded onto the hardened plastic handle. The result is an extremely durable, versatile and strong product.

Overall length 7 inch.

Suitable for woodturning gouge internal and external bevel edges, skews, carving tools, model engineering, router bits, saw blades, small chisels, knives, serrated edges, metals and plastics, pruners, shears and all shaped tooling.

3 FINE TAPERED FILEA versatile 3 inch half round/flat tapered file suitable for woodworking, gardening & domestic tooling.

3 MINI FINE TAPERED FILEA versatile 3 inch half round/flat mini tapered file suitable for woodworking, gardening & domestic tooling.

MACHINIST FILE FINE/COARSEDouble sided 2-3/8 inch machinist file.

U*DWS/TF3/FProduct Ref.

U*DWS/TF3M/FProduct Ref.

U*DWS/MF/FCProduct Ref.Product Ref.

Every woodturner should own this tool. Sharpen skews, gouges, scrapers and even carbide inserts in seconds.

- Jimmy Clewes, Professional Woodturner -

2

This product does a real nice job for you. Handy and versatile, a cool new product.

- George Vondriska, WoodWorkers Guild of America -

Product Ref.

I produce a razor sharp edge on forstner bits in seconds when utilizing

the Trend mini taper fi le.- Morris Schlesinger, Professional Woodturner & Master Woodworker -

the Trend mini taper fi le.

Every woodturner should own this tool. Sharpen skews, gouges, scrapers and even carbide inserts in seconds.

, Professional Woodturner -

own this tool. Sharpen skews,

carbide inserts in seconds.

Base plate engages in the T-slot in the extrusion.

Made from clear plastic. Includes adjustable

guide bar for perfect tracking using hex key provided.

ROUTER BASE PLATEPlunge router base accessory.

VARIJIG CLAMP GUIDES Self clamping, straight line clamp guides that use the Varijig low profi le extrusion.

ACCESSORIES A range of accessories for use with our Varijig Clamp Guides.

For accurate guiding of routers, saws and jigsaws.

Low profile extrusion with integral clamping of work-piece, double locking mechanism and two full length T-slots.

Common Varijig extrusion to 24 inch (610mm), 36 inch (915mm) and 50 inch (1270mm) Clamp Guides.

Metric and imperial sliding scale.

Extrusion profile 5/8 (16mm) high x 2-1/8 (54mm wide).

Ref. VJS/CG/PRO8 is an extra wide clamp 5 (127mm) with four T slots. Ideal for large sheet material. Clamps up to 8 foot (2.44 metre).

Jaws have fixing holes for accessories.

Extra wide clampRef. U*VJS/CG/PRO8

888 FOOT FOOT FOOT AVAILABLEAVAILABLEAVAILABLEAVAILABLEAVAILABLEAVAILABLE

Base plate engages in the T-slot in the extrusion.

Includes adjustable guide bar for perfect tracking using hex key provided.

SAW BASE PLATECircular saw base accessory.

BASE PLATECircular saw base accessory.

BASE PLATEBASE PLATECircular saw base accessory.

Engages in the T-slot on the clamp guide extrusion and can be locked in position using locking knob.

END STOP BLOCKAdjustable end stop block.

Gives better leverage to operate the clamp, especially when more clamping pressure is required.

Increases lever length by 5-1/4 (134mm).

Can be fitted and removed quickly.

HANDLE EXTENSIONLever extension handle for Varijig clamp guides.

U*VJS/CG/24 (24 inch / 610mm)U*VJS/CG/36 (36 inch / 915mm)U*VJS/CG/50 (50 inch / 1270mm)U*VJS/CG/PRO8 (8 foot / 96 inch / 2440mm)

Product Ref.

Router and cutter not included.

U*VJS/CG/RBPProduct Ref.

U*VJS/CG/SBPProduct Ref.

U*VJS/CG/ESBProduct Ref.

U*VJS/CG/EXTProduct Ref.

Router, bit and guides not included.

VARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIES

3

Ideal for repetitive grooves. Removable alloy adjustable bridge guide

stop can be locked in place. Bridge travel is 6-15/16 (176mm). Can be used as a length stop.

ADJUSTABLE SETTING GUIDE & STOP

Distributes clamping pressure over the workpiece to minimise clamping marks.

Built-in mounting holes allow a batten to be fitted.

Includes fixing screws.

Large 90 head allows clamp to be used as a clamping T-square.

Serrated front edge. Includes fixing screws.

Clamp one guide to the bench and attach another clamp upside down.

Two clamps joined together creates a 4-3/8 (112mm) wide component support surface which is ideal for sanding.

Six adapters are included so three pairs of clamps can be linked securely together.

WIDE JAW KITPair of plastic jaws for fitting onto the jaws of the Varijig clamp guides.

SQUARING ATTACHMENTAllows varijig clamp guide to be squared up for maximum accuracy.

SIDE-TO-SIDE CLIPS

Clamps to the Varijig clamp guide which can then be easily clamped to a router table top.

Provides horizontal side pressure.

Includes fixing kit.

Clips comprise of alloy brackets and knobs.

Raises component up 1-1/4 (32mm) for unobtrusive clamping especially for full edge mould work.

FEATHER BOARDFeather board finger pressure accessory.

BACK-TO-BACK CLIPSAllows two Varijig clamp guides to be joined back to back.

VARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & AC