Instruction Manual DAB Radio - teamknowhow.com DAB DIGITAL... · Location of Unit • The unit must...

Instruction Manual

DAB RadioSDABXRW13

SDABXRW13_IB_V2.indd 1 29/04/2013 08:55

SDABXRW13_IB_V2.indd 2 29/04/2013 08:55

1

Contents ...................................................1

Safety Warnings .......................................2

Introduction .............................................3Features .......................................................... 3

Controls and Connections .......................4Front View ...................................................... 4Back View........................................................ 5

Getting Started ........................................6Unpacking ...................................................... 6DAB/FM Aerial .............................................. 6Mains Power .................................................. 7Standby Control ........................................... 7

First Time Use ...........................................8Initial Scan ...................................................... 8Setting the Clock ......................................... 8

Basic Operation .......................................9Mode Select................................................... 9Volume Control ............................................ 9

Listening to DAB Radio ...........................9Browsing Stations........................................ 9Secondary Services ..................................... 9DAB Display Modes ..................................10

Listening to FM radio ............................11Automatic Tuning ......................................11Manual Tuning ............................................11RDS (Radio Data System .........................11FM Display Modes .....................................12

DAB and FM Station Presets .................13

Auxiliary Input .......................................14Connecting to Aux In ...............................14Playing the Aux Source ...........................14

Earphones ..............................................14Connecting Earphones............................14Listening to Earphones ...........................14

ContentsAlarms.....................................................15

Changing Alarm Settings .......................15Alarm Status ................................................17Setting the Alarm to Wake You .............17When the Alarm Sounds .........................17

Function Menu .......................................18Opening the Function Menu.................18Browsing the Functions Available .......18Function Menu Map .................................19

DAB Mode Menu Functions ..................20Full Scan ........................................................20DRC .................................................................20Prune ..............................................................20

FM Mode Menu Functions .....................21Scan Setting ................................................21Audio Setting ..............................................21

All Mode Menu Functions .....................22Sleep ..............................................................22Time ................................................................22Backlight .......................................................23Language .....................................................23Factory Reset ...............................................23Software Version ........................................23

Maintenance ..........................................24Cleaning the Radio ...................................24

Troubleshooting ....................................24

Specifications .........................................24

SDABXRW13_IB_V2.indd 1 29/04/2013 08:55

2

Safety Warnings• Read all the instructions carefully before

using the unit and keep them for future reference.

• Retain the manual. If you pass the unit onto a third party make sure to include this manual.

• Check that the voltage marked on the rating label matches your mains voltage.

Damage• Please inspect the unit for damage after

unpacking.• Do not continue to operate the unit if

you are in any doubt about it working normally, or if it is damaged in any way - switch off, withdraw the mains plug and consult your dealer.

Location of Unit• The unit must be placed on a flat stable

surface and should not be subjected to vibrations.

• Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over.

• The mains socket must be located near the unit and should be easily accessible.

Temperature• Avoid extreme degrees of temperature,

either hot or cold. Place the unit well away from heat sources such as radiators or gas/electric fires.

• Avoid exposure to direct sunlight and other sources of heat.

Naked Flames• Never place any type of candle or naked

flame on the top of or near the unit.

Moisture• To reduce the risk of fire, electric shock or

product damage, do not expose this unit to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, should be placed on the unit.

• If you spill any liquid into the unit, it can cause serious damage. Switch it off at the mains immediately. Withdraw the mains plug and consult your dealer.

Ventilation• To prevent the risk of electric shock or

fire hazard due to overheating, ensure that curtains and other materials do not obstruct the ventilation vents.

• Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated.

Safety• Always disconnect the unit from the mains

supply before connecting/ disconnecting other devices or moving the unit.

• Unplug the unit from the mains socket during a lightning storm.

Mains Adapter• The mains adapter will continue to

draw electricity from the mains supply when plugged in the mains socket. In the interests of safety and to avoid unnecessary energy consumption, never leave the adapter plugged in the mains socket while unattended for long periods of time. Disconnect the adapter from the power supply.

Mains Adapter Cable• Make sure the unit is not resting on

top of the mains adapter cable, as the weight of the unit may damage the cable and create a safety hazard.

Interference• Do not place the unit on or near

appliances which may cause electromagnetic interference. If you do, it may adversely affect the operating performance of the unit, and cause a distorted picture or sound.

Earphones• Listening to loud sounds for

prolonged periods of time may permanently damage your hearing.

• Before putting on earphones, turn the volume down then put the earphones on and slowly increase the volume until you reach a comfortable listening level.

SDABXRW13_IB_V2.indd 2 29/04/2013 08:55

3

Supervision• Children should be supervised to ensure

that they do not play with the unit.• Never let anyone especially children push

anything into the holes, slots or any other openings in the case - this could result in a fatal electric shock.

Safety Warnings

CAUTIONRISK OF ELECTRIC SHOCK

DO NOT OPEN

Introduction

Features• Your DAB radio features both DAB and

DAB+ reception and FM for areas that may not have DAB broadcasts.

• An AUX (line) input enables connection of audio sources such as personal audio players.

• A headphone jack is provided for personal listening.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the manual accompanying the unit.

Service• To reduce the risk of electric shock, do not

remove screws. The unit does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel.

• Do not open any fixed covers as this may expose dangerous voltages.

Maintenance• Ensure to unplug the unit from the power

supply before cleaning.• Do not use any type of abrasive pad or

abrasive cleaning solutions as these may damage the unit’s surface.

• Do not use liquids to clean the unit.

SDABXRW13_IB_V2.indd 3 29/04/2013 08:56

4

1. MODE buttonSelects between DAB, FM and AUX modes.

2. STANDBY buttonSwitches the unit between the ON and STANDBY modes.When the alarm sounds, press to turn the alarm off.

3. INFO buttonChanges the information display.

4. VOLUME dialIncreases and decreases the volume.

5. ALARM buttonSet and enable/disable the dual alarms.

Controls and Connections

6. DISPLAY7. SCAN button

Auto-scans in DAB/FM mode.8. SCROLL/SELECT dial

Station selection and tuning control.Navigates up/down on a menu screen and adjusts settings.Press to confirm a menu selection.

9. MENU buttonDisplays the main menu.

10. PRESET buttonSave or recall preset radio stations.

FRONT VIEW

MODE ALARMINFO MENU PRESETSCAN

SCROLLVOLUME

f 1)iga c eb d h

SDABXRW13_IB_V2.indd 4 29/04/2013 08:56

5

Controls and Connections

BACK VIEW

b c d

a

1. DAB/FM AerialAlways fully extend the aerial when listening to the DAB or FM radio.

2. EARPHONES SocketConnect headphones or earphones to this socket.

3. AUX IN SocketConnect AUX (Line) sources to this socket.

4. DC IN SocketConnect the AC adapter to this socket.

SDABXRW13_IB_V2.indd 5 29/04/2013 08:56

6

Getting StartedUnpackingRemove all packaging from the unit. Retain the packaging. If you dispose of it please do so according to local regulations.These items are included:


SCROLLVOLUME

DAB radio

AC adapter

DAB/FM AerialAlways unclip and fully extend the aerial when listening to DAB or FM radio.The aerial has a swivel base so can be set to different angles for best reception.


SCROLLVOLUME

Fully extend the aerial before connecting power for the first time. This will ensure that the initial scan captures all stations in your area.

If items are missing or damaged, please contact Partmaster (UK only).Tel: 0844 800 3456 for assistance.

SDABXRW13_IB_V2.indd 6 29/04/2013 08:56

7

Mains PowerThis unit is designed only to operate with the supplied AC adapter.Connecting the radio to any other power source may damage it. • Unwind the AC adapter cable to its full

length. • Connect the plug at the end of the

cable to the DC IN Socket on the back of the radio.

• Plug the AC adapter into a mains socket and switch the socket on (if necessary). The unit is now connected and ready to use.

• To switch the unit off completely, unplug the mains adapter from the mains socket.

Getting StartedStandby ControlWhen you first connect the radio to the mains socket, the radio will be in Standby.• Press (Standby) to switch the unit on.• Press (Standby) again to switch the

unit back into standby.Disconnect the AC adapter from the mains socket if you want to switch the unit off completely.

SDABXRW13_IB_V2.indd 7 29/04/2013 08:56

8

First Time UseInitial ScanWhen your radio is switched on from Standby for the first time it will scan the DAB band, searching for usable stations. These will be stored alphanumerically.The initial scan will take a few minutes. While the scan is running, the scan progress will be shown on a bargraph and the number of stations found will be displayed.

Manual clock settings will be updated when you next tune to a DAB station.

When the scan finishes, the radio will play the first station in the sequence.Note: If no stations are found, switch the radio off and move it to a location with a stronger signal. When you switch the radio back on it will automatically repeat the scan process.

Setting the Clock AutomaticallyThe time and date are set automatically from DAB station information.

Setting the Clock ManuallyThe clock can be set manually if there are no DAB stations in your area.Refer to the ‘Time’ section on page 22 for more details.

Number of stations found

Scan progress

SDABXRW13_IB_V2.indd 8 29/04/2013 08:56

9

Basic OperationMode Select• Press MODE repeatedly to switch

between DAB, FM and Auxiliary Input modes.

Each mode will be displayed in turn.

Volume Control• Turn the VOLUME dial to adjust the

volume to the level you want.The volume level will be displayed on a bargraph.

Listening to DAB Radio• Press MODE repeatedly until ‘DAB

Mode’ is displayed.The radio will tune to the last station played.The station name and scrolling information text will be displayed.

Browsing Stations• Turn the SCROLL/SELECT dial to

browse the DAB station list for the station you want.

• Press the SCROLL/SELECT dial to select the station displayed.

Secondary ServicesA >> symbol after the name of a station indicates there are secondary services available for that station. These secondary services are related to the primary station, e.g. a sports station may want to add extra commentaries. The secondary services are inserted directly after the primary station in the station list.• To select a secondary station, turn the

SCROLL/SELECT dial until you find the secondary service you want, then press the SCROLL/SELECT dial to select it.

When the secondary service ends, the unit will automatically switch back to the primary station.

If you move your radio to another area you may need to scan the DAB band and re-fresh the station list.If the scan is unsuccessful, you may need to ‘Factory Reset’ the radio. This will clear the station list and preset memories and run a fresh scan.See page 20 for more details of scanning.See page 23 for more details of factory reset.

SDABXRW13_IB_V2.indd 9 29/04/2013 08:56

10

DAB Display ModesThe bottom line of the DAB radio display is the information display.

• Press INFO repeatedly to change the information displayed.

The DAB information display options are shown below.

Information display

DLS (Dynamic Label Segment)Dynamic Label Segment is a scrolling message that the broadcaster may include with their transmissions. The message usually includes information, such as programme details etc.

Signal StrengthThe display will show a slide bar indicating the signal strength: the stronger the signal, the longer the bar will be from left to right.

Programme TypeThis describes the “Style” or “Genre” of music that is being broadcast e.g. “Rock” or “Classical”.

Multiplex NameA multiplex is a collection of radio stations that are bundled and transmitted on one frequency. There are national and local multiplexes. Local ones contain stations that are specific to that area.

FrequencyThe channel and frequency of the present station will be displayed, such as “11C 220.352MHz”.

BitRateThe display will show the radio mode and the digital audio bit rate being received.

Audio CodingThe display will show the audio coding format.

Time, DateThe broadcaster (radio station) provides clock and date information automatically so there’s no need to manually set this information.

DLS Scrolling text

Signal strength

Programme type

Multiplex name

Frequency

Bitrate

Audio coding

Time

Date

SDABXRW13_IB_V2.indd 10 29/04/2013 08:56

11

Listening to FM Radio• Press MODE repeatedly until ‘FM Mode’

is displayed.The radio will tune to the last station played.The station name or frequency and scrolling information text will be displayed.

Automatic Tuning• Press SCAN to search for the next

station in the FM band.Once a station has been found, scanning will stop automatically.

To change scan direction, turn the SCROLL/SELECT dial before pressing SCAN. Turn the dial clockwise to set the scan direction up the band, anti-clockwise to scan down the band.

Manual Tuning• Turn the SCROLL/SELECT dial to tune

in frequency steps of 50kHz.Turn the dial clockwise to tune up the band, anti-clockwise to tune down the band.

RDS (Radio Data System)Your radio can receive RDS data, broadcast with some FM stations.When you tune to a station broadcasting RDS data, the station name and information text will be displayed.

After scanning for a station you can use manual tuning to fine-tune for the best signal.

Not all FM stations transmit RDS information.

SDABXRW13_IB_V2.indd 11 29/04/2013 08:56

12

FM Display ModesThe bottom line of the FM radio display is also an information display.

• Press INFO repeatedly to change the information displayed.

The FM information display options are shown below.

Information display

Radio TextThe broadcaster can include a scrolling text that displays information about the current programme.

Programme TypeThis describes the “Style” or “Genre” of music that is being broadcast e.g. “Rock” or “Classical”.

FrequencyThe frequency of the present station will be displayed, such as “90.30MHz”.

Audio ModeWhen in FM mode, the display will show if the station being received is in Mono or Stereo mode. The receiver will automatically switch between Stereo and Mono modes. You can however override this function, so that you can manually switch between Stereo and Mono modes, which is helpful if you’re listening to a station with a weak FM signal (see page 21).

Time/DateThe broadcaster (radio station) provides clock and date information automatically so there’s no need to manually set this information.

Radio text

Programme type

Frequency

Audio mode

Time

Date

SDABXRW13_IB_V2.indd 12 29/04/2013 08:56

13

DAB and FM Station PresetsYou can store up to 10 of your favourite stations as presets on both the DAB and FM bands. This will enable you to access your favourite stations quickly and easily

Saving Preset Stations• Tune to the station you want to save.• Press and hold PRESET.

Recalling a Preset Station• Press PRESET

The display will show <1: (Empty)>.• Turn the SCROLL/SELECT dial to

choose a preset location to store the station.

• Press the SCROLL/SELECT dial to confirm.

The display will show <Preset # stored>.• Re-tune to more of your favourite

stations and follow the steps above to store up to 10 presets on each band.

Preset Recall will be displayed.• Turn the SCROLL/SELECT dial to

browse the presets.• Press the SCROLL/SELECT dial to select

a preset.If you choose a preset that hasn’t been allocated a station, <#: (Empty)> will be displayed and the current station will continue to play.

SDABXRW13_IB_V2.indd 13 29/04/2013 08:56

14

You can play your personal music player or laptop computer through your radio by connecting the headphone or Line output to your the AUX In socket on the back of your radio. Always make sure the unit is switched off at the mains before making any connections.

Connecting to Aux In• Connect a 3.5mm jack cable (not

supplied) from the headphone or line output of the source to the AUX In socket on the back panel.

Playing the AUX Source• Press MODE repeatedly until ‘Auxiliary

Input Mode’ is displayed.• Select the music etc from your source

and set it to play.• Set the volume on the source to about

half way.• Set the volume from your radio in the

normal way.• If you find the maximum volume level

is too low, increase the volume on the source.

EarphonesConnecting Earphones• Turn down the volume before

connecting your earphones.• Connect your earphones to the

socket on the back panel.When earphones are connected, the speaker is automatically muted.

Listening to Earphones• Slowly raise the volume with the

earphones on.

Long-term exposure to loud music may cause hearing damage. It is best to avoid extreme volume when using earphones, especially for extended periods of time.

AUX In

SDABXRW13_IB_V2.indd 14 29/04/2013 08:56

15

AlarmsYour radio includes dual alarms. You can set either or both to wake you.

Changing Alarm Settings• Switch the radio on.

To set Alarm 1:• Press ALARM.‘Alarms 1 Setup’ will be displayed.

To set Alarm 2:• Press ALARM twice.‘Alarms 2 Setup’ will be displayed.

Changing the settings:After selecting the alarm you want to set.• Press the SCROLL/SELECT dial.‘Alarms 1 (or 2) Wizard’ will be displayed.You can now change the alarm settings in the following sequence -

Alarm On/Off:

• Turn the SCROLL/SELECT dial to switch the selected alarm on or off.

• Press the SCROLL/SELECT dial to save and move on to the next setting.

Time:

• Turn the SCROLL/SELECT dial to set the time (hour) that the alarm will sound.


• Turn the SCROLL/SELECT dial to set the time (minute) that the alarm will sound.


Duration:

• Turn the SCROLL/SELECT dial to set the duration that the alarm will sound. Choose a time of 15, 30, 45, 60 or 90 minutes.


Source:

• Turn the SCROLL/SELECT dial to set the source that will play when the alarm sounds.


Preset:

This option is available if you choose DAB or FM source for the alarm. • Turn the SCROLL/SELECT dial to select

a preset number to play when the alarm sounds or choose ‘Last Listened’ to tune to the last station you were playing.


SDABXRW13_IB_V2.indd 15 29/04/2013 08:56

16

Alarm repeat:

• Turn the SCROLL/SELECT dial to choose how often the alarm will sound - Daily, Once, Weekdays, Weekends etc.


Date:

This option is available to set the date if you choose ‘Once’ when setting alarm repeat. • Turn the SCROLL/SELECT dial to

choose the day.• Press the SCROLL/SELECT dial to save

the day setting.• Turn the SCROLL/SELECT dial to

choose the month.• Press the SCROLL/SELECT dial to save

the month setting.• Turn the SCROLL/SELECT dial to

choose the year.• Press the SCROLL/SELECT dial to save

the year setting.

AlarmsVolume:

• Turn the SCROLL/SELECT dial to set the volume level when the alarm sounds on the bargraph.

• Press the SCROLL/SELECT dial to save and exit alarm setting.

‘Alarm saved’ will be displayed.

SDABXRW13_IB_V2.indd 16 29/04/2013 08:56

17

Setting the Alarm to Wake You• Check that the alarm(s) is enabled.• Set the radio to Standby.

Changing the Alarm Status:To switch the alarms on or off when set to Standby -• Press ALARM repeatedly.The alarm status will change. There are four options available to enable either or both alarms or to disable both.

To briefly switch on the display backlight to full brightness when set to Standby, press one of the buttons.

Alarm 1Alarm 2

Alarm Status Checking the Alarm Status:The Alarm indicators on the display show when an alarm is enabled to wake you.

If you are unable to read the display at night, set the ‘Standby’ backlight brightness to a higher setting. See page 23 for more details.Make sure that you set the alarm

volume level high enough to wake you!

Alarms

Alarm 1 status

Alarm 2 status

When the Alarm SoundsTo stop the alarm sounding:• Press ALARM or (Standby) to stop

the alarm sounding.

To set Snooze mode:• Press the SCROLL/SELECT dial

repeatedly to set a snooze time of 5, 10, 15 or 30 minutes.

When Snooze mode is set the alarm will stop sounding for the snooze period.The alarm indicator will flash on the display and the snooze time will count down.

When the snooze time expires the alarm will sound again.• You can now set Snooze mode again

or press (Standby) to cancel Snooze mode and switch the alarm off.

SDABXRW13_IB_V2.indd 17 29/04/2013 08:56

18

Function MenuYour radio includes additional functions that you can access via the Function Menu.

Opening the Function Menu• Press MENU.The display will switch to show the Function menu options on the bottom line of the display.

Browsing the functions available• Turn the SCROLL/SELECT dial.The function options will scroll across the display.The functions available will depend on the mode selected. A full list of the options available for each mode is shown on the opposite page.• Press the SCROLL/SELECT dial to select

the function displayed.More details of each of the functions available in each mode can be found in the following pages.

Function menu option

SDABXRW13_IB_V2.indd 18 29/04/2013 08:56

19

Full scan

DRC

Prune

Sleep

Time

Backlight

Language

Factory reset

Software version

Scan setting

Audio setting

DA

B m

od

e o

nly

FM

mo

de

on

ly

All

mo

de

s

Function Menu Map

SDABXRW13_IB_V2.indd 19 29/04/2013 08:56

20

DAB Mode Menu FunctionsThese menu functions are only available when the radio is set to DAB mode.

Full scanYou can perform a full scan at any time to scan for new DAB stations. The stations will be added to your station list.• Select the ‘Full Scan’ option from the

menu.The scan will take a few minutes. While the scan is running, the scan progress will be shown on a bargraph and the number of stations found will be displayed.

Number of stations found

Scan progress

When the scan finishes, the radio will play the first station in the sequence.

DRC (Dynamic Range Control)DRC will compress the sound, making quiet sounds slightly louder. Enable DRC when listening at very low levels or when listening in a noisy room.• Select the ‘DRC’ option from the menu.• Choose from ‘Off’, ‘High’ or ‘Low’.

PruneThe Prune function enables you to delete all unavailable stations from the Station List. This may be necessary if you move to another location/area and some of the stations in you Station List are no longer available.• Select the ‘Prune’ option from the menu.• Select ‘Yes’ to go ahead.All unavailable stations will be deleted.• Select ‘No’ to exit and leave the Station

List unchanged.

SDABXRW13_IB_V2.indd 20 29/04/2013 08:56

21

FM Mode Menu FunctionsThese menu functions are only available when the radio is set to FM mode.

Scan settingYou can set the FM scan setting to stop scanning on ‘All Stations’ found or ‘Strong Stations’ only.• Select this option to change the scan

setting.

Audio settingThe audio setting enables you to switch FM reception between ‘Stereo Allowed’ or ‘Forced Mono’.Setting to ‘Forced Mono’ will reduce the level of background noise of a weak station when listening in stereo through headphones.• Select this option to change the audio

setting.

SDABXRW13_IB_V2.indd 21 29/04/2013 08:56

22

All Modes Menu FunctionsThese menu functions are available in all modes.

SleepThis function allows you to programme the unit to switch to standby mode by itself after a set time.• Select the ‘Sleep’ option from the menu.• Turn the SCROLL/SELECT dial to select

the Sleep time you want. Choose from 15, 30, 45, 50 or 90 minutes.

• Press the SCROLL/SELECT dial to confirm the setting.The sleep indicator will be displayed and the sleep time will start.

Sleep indicator

The radio will continue to play until the sleep time expires, then set to Standby. If you can receive DAB radio signals,

enabling the auto-update setting is strongly recommended.

Set 12/24 hour:• Select this sub-option to change the

format of the time display.

Set date format:• Select this sub-option to change the

format of the date display.

TimeThe Time function enables you to change the time and date settings for your radio.• Select the ‘Time’ option from the menu.• Select one of the four sub-options -

• Set 12/24 hour.• Set Time/Date.• Auto Update.• Set date format.

Set Time/Date:• Select this sub-option to set the time

and date manually.You can now set in turn the hour, minute, day, month and year.When the year setting is completed, the Time menu will be displayed.

Auto update:• Select this sub-option to enable or

disable time and date updates from DAB radio.

SDABXRW13_IB_V2.indd 22 29/04/2013 08:56

23

BacklightThe backlight setting enables you to change the display brightness.• Select the ‘Backlight’ option from the

menu.• Select one of the two sub-options -

• Power On.• Standby.

• Set the backlight setting to your preference of ‘High’, ‘Medium’ or ‘Low’.

All Modes Menu Functions

Setting to ‘Low’ will reduce power consumption.

LanguageThe language setting changes the language used for the display menus.• Select the ‘Language’ option from the

menu.• Choose one of the languages available.The display menu language will change.

This setting will not change the language of broadcast information.

Factory resetThe Factory Reset function will delete all station lists, radio presets and alarm settings. It may be necessary to reset your radio when you move to another area. This will enable the radio to erase and re-acquire the new station list.• Select the ‘Factory Reset’ option from

the menu.• Select ‘Yes’ if you want to continue.After a short delay, the radio will re-start, set to Standby.

Software versionThis function will display the software version used in your radio. The information may be useful to a service engineer.

After Factory Reset, the DAB Station List will be erased, stored presets and alarm settings will be deleted.When the radio is switched on a scan will take place to re-fresh the Station List.

SDABXRW13_IB_V2.indd 23 29/04/2013 08:56

24

Cleaning the radio

Maintenance

Ensure the unit is fully unplugged from the mains socket before cleaning.

• To clean the unit, wipe the case with a slightly moist, lint-free cloth.

• Do not use any cleaning fluids containing alcohol, ammonia or abrasives.

• Do not spray an aerosol at or near the unit.

TroubleshootingIf a problem does occur, it may often be due to something very minor. The following table contains various tips.

Symptom Suggestion

No power. • Check that the AC adapter is connected and plugged into a power socket.

Poor radio reception. • The signal may be weak. Try re-positioning the aerial. If this doesn’t work check the radio in a different location. Avoid placing the radio near computers and other electronic equipment.

No radio information text. • The signal may be too weak to receive information text.

• Not all stations broadcast information text.

Insufficient volume when playing an Aux source.

• The volume may be turned down on the source. Try a higher setting.

No response to the controls • Disconnect AC power. Wait 10 seconds. Re-connect AC power.

Specifications

Model SDABXRW13

Power supply 100-240 V~ 50/60 Hz

DC Power in 9 V, 1 A

Radio frequency range DAB 174-240 MHzFM 87.5-108 MHz

Weight 1.3 kg

Dimensions 112 mm (L) x 213 mm (W) x 129 mm (H)

SDABXRW13_IB_V2.indd 24 29/04/2013 08:56

This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU.For more information, please contact the local authority or your retailer where you purchased the product.

All trademarks are the property of their respective owners and all rights are acknowledged.

Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day.

Visit www.partmaster.co.uk or call 0844 800 3456 (UK customers only) Calls charged at National Rate.

For general information about this appliance and handy hints and tips, please visit

www.knowhow.com/knowledgebank or call 0844 5611234.

SDABXRW13_IB_V2.indd 25 29/04/2013 08:56

IB-SDABXRW13-130429V2

DSG Retail Limited (Registered in England No. 504877)Maylands Avenue, Hemel Hempstead, Hertfordshire, HP2 7TG, UK

SDABXRW13_IB_V2.indd 26 29/04/2013 08:56

Instruction Manual DAB Radio - teamknowhow.com DAB DIGITAL... · Location of Unit • The unit must...

Documents

Transcript of Instruction Manual DAB Radio - teamknowhow.com DAB DIGITAL... · Location of Unit • The unit must...