by

Industrial Series

* Turn-Key Solutions

* Global Installations Including remote sites - requires no foundation

Extreme climates such as high humidity, intense heat, freezing tempatures,

and winds 90mph/145kmph

Projects in 60+ countries

Green operations leave zero footprint

Shasta Shelter Industrial Series

Global Focus

Turn-Key Solutions

Drawings & Specs

Accessories

The Shasta Shelter® Industrial

Series offers clear span structures that

range in size from 20’-300’ wide. The

structures are modular by design and

do not need any internal columns or

supports which creates unmatched

and exceptional volume.

Pre-engineered kits require no

on site fabrication or welding of the

frame or fabric to install. The structure

is fully re-locatable, allowing for

disassembly and reuse of all compo-

nents (except anchors) without

additional fabrication or welding. The

shelters are easy to install on

concrete, asphalt, grass or dirt and

have flexibility for any product config-

uration.

Engineering meets current

International Building Code (IBC) and

Berry Amendement. Fabric meets

NFPA 701 fire code for safety.

Certified warranted materials and

rigorous testing are the foundation of

our manufacturing procedures.

Our quality assurance program

follows the product through each phase

of manufacturing to ensure consistent

quality.

WatchVideo

Shasta Shelter® Industrial Series

20, 50, 100, 150, 200

Shasta Shelter® by Creative

Tent International (CTI) is a

solutions-based large volume clear

span fabric structure.

We specialize in a creative

approach to integrate customer

requirements into our standard prod-

uct line. With more than 50 years of

experience in design, manufacturing

and service to the fabric structure

industry, we provide customer

solutions worldwide.

Our technicians are field

sensitive to onsite environmental

conditions, complexity of installation

and logistics. All of our products are

made in the USA and designed,

engineered, and manufactured for

superior quality.

IS200 160’ -225‘ W x 36’E

IS150 125’ Wx x 16’E

IS150 105’ W x 16’E

IS150 90’ W x 16’E

IS100 50’ W x 16’E

IS100 65’ W x 16’E

IS100 75’ W x 16’E IS50 47’W x 14’E

IS20 40’ W x 7’E

IS20 30’ W x 7’E

IS20 20’ W x 7’E

Global Focus We have products in more than 60 countries

that are used by military, industrial, event, recreation,

and resort industries.

We are skilled in dealing with overseas

projects and logistics and pride ourselves on our global

focus, international support, and service throughout the

world.

We offer international support & service in 60+ countries

Aircraft Hangars

Shasta Shelter® accelerates

expeditionary operations and our Shasta

Shelter® Industrial Series is designed for

quick installation in the field with no

foundation required.

Maintenance is a necessary part

of efficiency. When jobsites change, our

Large Area Maintenance Shelters (LAMS)

facilitate moving locations. Take down,

small cube packing, shipping and

redeployment is easy.

The units can be reconfigured

to meet the need of the next area and

specific use.

Vehicle Maintenance

Features Designed for a quick install in field conditions

16’ or 24’ eave height

Gable Ends or Full Width Doors

Engineered for 90 - 110 mph Winds

8 psf Utility Load to 20 psf Snow Load

Patent # 6,502,593

Accessory Kits Single & double personnel door

Electrical & Lighting Package

Anchor Kits for Concrete or Asphalt/Ground

Insulating Liner Kit – Decreases HVAC Requirement by 40%

HVAC - 5, 10, 20, 25 Ton Units with Ducting

Gas or Electric Powered Stake Drivers

Storage & Warehouse The Shasta Shelter® Industrial

Series provides more than enough

storage space whether you are keeping

bedding supplies, mess hall non-perish-

ables, equipment and tools, or a variety

of vehicles and transportation supplies.

Create a portable and re-locat-

able work camp that leaves zero footprint

when you leave. Shasta Shelters are

engineered for 90 mph winds and a snow

load of 20 psf.

Personnel Facilities

Sleeping Quarters

OfficesShasta Shelter® provides adequate office space and dining facilities so that in remote locations your staff has all the necessities to work efficiently.

When workers spend months and sometimes years away from family and the place they call home, they need a place to rest, get cleaned up and take care of business.

While it may not be home, our shelters provide the necessary protection your workers need in order to be rested for work and energized to perform to the best of their abilities.

Dining

Shasta Shelter® Industrial Series

2 Open Ends 2 Gable Ends

2 Open Ends

2 Gable Ends

2 Full Width Doors

Example: IS20E

2 Gable Enndsddddd

ample: IS20Ex

Example: IS50

Example Drawings

2 Gable Ends

2 Full Width Doors

2

1 Gable End 1 Full Width Door

2 Open Ends

Example: IS100

EndsUnits per 20’

Container

Install Time

People x Hours x Days

W’ x L’ x E’ x B’ Meters (approx.) LBS KGS

20 x 32 x 7 x 16 6 x 10 x 2 x 5 2 Gable Ends 18 Units 1550LBS 703KGS 4x.5H

40 x 112 x 7 x 16 12 x 34 x 2 x 5 2 Gable Ends 2 Units 4317LBS 1958KGS 6x7H

Dimensions

IS20

Weight

EndsUnits per 20’

Container

Install Time

People x Hours x Days

W’ x L’ x E’ x B’ Meters (approx.) LBS KGS

47 x 64 x 14 x 16 14 x 20 x 4 x 5 2 Open Ends 2 Units 6400LBS 2902KGS 6x4H

47 x 96 x 14 x 16 14 x 30 x 4 x 5 2 Gable Ends 2 Units 7900LBS 3583KGS 6x8x1

47 x 115 x 14 x 16 14 x 35 x 4 x 5 2 Full Width Doors 1 Unit 10,272LBS 4659KGS 6x8x1

Dimensions Weight

IS50

EndsUnits per 20’

Container

Install Time

People x Hours x Days

W’ x L’ x E’ x B’ Meters (approx.) LBS KGS

65 x 80 x 16 x 16 20 x 24 x 5 x 5 2 Open Ends 2 Units 9675LBS 4388KGS 8x8x1

65 x 80 x 16 x 16 20 x 24 x 5 x 5 2 Gable Ends 1 Unit 11,730LBS 5320KGS 8x16x2

75 x 96 x 16 x 16 23 x 29 x 5 x 51 Gable End, 1 Full

Width Door1 per 2 Containers 15,300LBS 6939KGS 8x24x3

75 x 111 x 16 x 16 23 x 34 x 5 x 5 2 Full Width Doors 1 per 2 Containers 19,870LBS 9012KGS 8x24x3

Dimensions Weight

IS100

Shasta Shelter® Industrial Series

EndsUnits per 20’

Container

Install Time

People x Hours x Days

W’ x L’ x E’ x B’ Meters (approx.) LBS KGS

90 x 153 x 16 x 16 28 x 47 x 5 x 51 Gable End, 1 Full

Width Door1 per 3 Containers 39,000LBS 17,690KGS 10x40x5

105 x 280 x 24 x 16 32 x 85 x 7 x 5 2 Full Width Doors 1 per 6 Containers 66,000LBS 29,937KGS 10x80x10

125 x 304 x 16 x 16 38 x 93 x 5 x 5 2 Gable Ends 1 per 6 Containers 72,250LBS 32,772KGS 10x80x10

Dimensions Weight

IS150

EndsUnits per 20’

Container

Install Time

People x Hours x Days

W’ x L’ x E’ x B’ Meters (approx.) LBS KGS

160 x 180 x 36 x 15 49 x 55 x 11 x 4.51 Gable End, 1

Hangar Door

1 per 6

40’ Containers111,000LBS 50,348KGS 12x80x10

200 x 300 x 36 x 15 61 x 91 x 11 x 4.5 2 Gable Ends1 per 12

40’ Containers240,000LBS 108,862KGS 12x112x14

Weight

IS200

Dimensions

Specification Tables

Dimensions in/cm 18 x 18 x 2 / 45.7 x 45.7 x 5.1 square puzzle design

Weight lbs/ kgs 6.4/ 2 Material 100% recyclable

Polyolefin thermoplas�c 50-100% Other thermoplas�c 0-50% Non-thermoplas�c 0-50%

Color Black w/ colored specs UV Stability Good

Connec�on System Corner locks to snap in to connect 4 panels Edge locks snap in to connect perimeter panels Locks made of high strength nylon

Load Capacity 80,276 psf @ 72˚F/ 392,000psm @22.22˚C 61,183 psf @150˚F / 298,000psm @65.56˚C

Point Load Capacity 557 psi @72˚F/ 39.16 kgf/cm² @22.22˚C 424 psi @150˚F /29.81 kgf/cm² @65.56˚C

Dynamic Func�on Dry – 0.63 Wet – 0.42

Chemical Fric�on Excellent Op�onal

Accessories Lock Removal Tool Replacement Fork Set (4ct.)

Warranty 5 year limited Accessories Replacement Fork Set (4ct.)WWWWWWWWWWWWWWWaaaaaaaarrrrrrrrrrrrrrrrraaaaaaaaannnnntttttttttyyyyyyyyyyy 5555555555555 yyyyyyyyyyyyeeeeeeaaaaaarrrrrr llllllliiiiiiiimmmmmmiiiiiiittttttttteeeeeeedddddddddd

Flooring

80,000 psf

HVAC & Trailer

Model 5 Ton 10 Ton 20 Ton Cooling Capacity

BTU/h 60,000 120,000 240,000

Electrical Heat Op�onal

12kW 36kW 54kW

CFM 2,000 4,000 8,000 Electrical

Requirements 208-230/ 60/ 3 208-230/ 60/ 3 460V, 3ph

Current Consump�on

45 amps 30 amps 50 amps

Dimensions W x L x H

inches/cm

44.25x69.875x36.25/ 112.39x177.48x92.075

63.1875x99.6875x50.875/ 160.50x253.21x129.22

84.1875x121.6875x54/ 213.84x309.09x137.16

Net Weight lbs/kgs

825/374 1388/629 2516/1141

LightingString: (Part NO. EL-31502SK) EMI Protected Fluorescent Light

Fixture, 36 Watt with cord and plug.

Features

-EMI (electromagnetic interference) protected lights will not

compromise peripheral electronics.

-Reduces visible signature

-Low RFI Tolerance

-Low Amp Draw

-No Heat Build Up

-Flicker Free

-Multi Volt

LED Bay Light: Our LEDs are rated at over 100,000 hours of life and

deliver constant, dependable CRI natural daylight emulation, free of

flicker or stroboscopic effects. Instant on/off capability with optional

motion sensor increase energy conservation. MG-MFL series LEDs

are optimally suited for heavy industrial, warehouse, commercial,

interior, exterior, as well as marine settings.

Features

-132W typical power consumption

-Up to 100,000 hours lamp life

-110-227 VAC

-Beam angle – batwing

-5 year full warranty

-Weight 13lbs.

400 Watt High Bay Light: (Part No. EL-01029) 400 Watt Metal Halide

Light fixture w/wiring and plug. Quad Tap Ballast assembly

(120/208/240/277).

Features

-Steel housing provides strength and ease of installation.

-High Power factor Open Air Ballast for cooler operating

temperatures.

-High efficiency refractor designed to provide uniformity and

control.

-Slide on Mounting Box for quick and easy installation. Twist

lock bracket is heavy duty steel, safety chain included.

PowerThe PL Series Load Center product line provides a wide array of variation to

meet any application need.

The following offering is available in the PL Series product line:

- 12-70 Circuits/Spaces

- Indoor and Outdoor enclosures

- 100 to 225 Amp

- Main Lug and Main Breakers

- Un-assembled offering in 3-phase

Whisper Watt 45: (Part No. EL-GEN-WW45) Prime Rating – 36 kW (45 kVA),

Standby Rating – 40 kW (50 kVA), 60 Hz, simultaneous single and three

phase power. Heavy duty, 4cycle, direct injection, diesel engine.

Features

-Reliable power built to withstand tough environments.

-Powder-coated weatherproof steel housing that allows a low

operating noise level of 65 dB (A) at 23 feet.

-Automatic voltage regulator provides precise regulation.

-Analog control panel includes AC circuit breaker, AC volt

meter frequency meter, AC circuit breaker, engine gauges, and more.

-EPA emissions certified.

-Fully lockable enclosure allows for safe unattended operation.

Power Distribution Box: (Part No. EL-DB100MA-P22QS3) Portable Power

Distribution Box. 200 amp, 3 phase, 4 pole, 5 wire, 120/208Y VAC, Military

Style Enclosure. (2) 100 amp Pin & Sleeve inlets to (4) 60 amp Pin & Sleeve

receptacles, (2)30 amp Pin & Sleeve receptacles, (2) 20 amp Pin & Sleeve

receptacles, and (1) NEMA 5-20 20 amp GFCI duplex receptacle.

Features

-Fully insulated heavy-duty molded rubber enclosure with HDPE top

and bottom.

-Weather resistant.

-Passed MIL-STD-810F testing.

-Units can be stacked, saving storage and space.

-Elevated base keeps receptacles above ground level and out of

water.

Bedding

Easily creates single or bunk

bed

Compact steel frame for

strength, quick assembly, and

take-down

Sleep area: 79” (201cm) L x 34.5” (88cm) W

Height of bottom cot: 11.25” (28.5cm)

Height of top cot: 32” (81.5cm)

Pack dimensions: 41” (104.1cm) L x 17” (43.2cm) W x 9”

(22.9cm) H

Weight: Bunk- 66lbs/29kgs,

Shipping in box - 71.5lbs/32kgs

Stain-resistant mat is easy to clean, recyclable

or replaceable at low cost

Pre-incident stock piling due to low cost and

non-deteriorating materials

Easy assembly and disassembly in minutes by a single

person

No tools required - No bolts, screws, or hinges - frame

connects with

patented disc system

Polyester bag for compact storage

Weight tolerance: 400lbs (181kg) – per single cot

SpecsEngineered Framed Tension Structures (Tents)

Product ___ Width x ___ Length x ___ Eave ___Bay Spacing w/____ End Configuration____

CTI Specifications are as follows: The structure is a clear span, frame supported tension fabric structure of modular design with open, gable or

round ends with accessories of: personnel doors, vehicle doors, fabric doors, electrical lighting systems, tool kits, ventilation (HVAC, dehumidifiers,

vents), liners (insulating or decorative), floor systems. See CTI accessories for full choice on each unit.

There are no internal posts or supports. The structure is a pre-engineered unit requiring no on site fabrication or welding to install or relocate.

This applies to structural frame components, fabric and accessories. The structure shall be fully re-locatable, allowing for disassembly and reuse

of all components (except anchors) without additional fabrication or welding of structural components or fabric. Product specific specifications

are detailed in each category.

Dimensions of the structure shall have center line dimensions (within .25 feet):

Width: ____ Length: ____ Eave Height: ____ Bay Spacing: ____ Center Height: ____

Frame Specs: Frame consists of a series of identical arches, with connecting purlins and cables. The arches have rounded eaves and ridge with

snap button connections. Frame components for the arches consist of a hollow oval-beam design made from extruded corrosion-resistant,

anodized, lightweight 6061-T6 structural grade aluminum.

The extrusion for the arches have integral inner and outer rope edge channels. To accommodate exterior (fabric shell) and interior (liner) tension

fabric panels. The extrusion shall be designed to allow rapid attachment or relocation of lighting, rigging and other accessories without drilling

or welding.

Interchangeability / Modularity: Structural components shall be such that like components can be exchanged within or between like structures.

Purlins and shear cables are located on the inside of the fabric shell. Base Plates are anchored prior to frame installation for safety reasons.

Arches shall be assembled on the ground and tilted up to position after attachment to base plates utilizing a hinge-pin design. All structural

fasteners are galvanized steel ASTM A325. Anchor bolts shall conform to ASTM A325 or ASTM A193, Grade B7.

Tech screws and other non-structural attachments are of standard commercial quality and finish. Structure shall be capable of being equipped

with an optional high-wind kit for increased wind loading and snow-load kit for increased snow loading in extreme conditions, which shall not

require welding or drilling into the frame.

Fabric Specs: Fabric shell is flame resistant (as defined under NFPA 701. (Laminate or Coated) PVC material weighing at lease 18/22/24 oz. /Linier

yd2 and strong enough to meet the performance characteristics required of the structure.

The fabric shell standard white (color) exterior and white (color) interior – for commercial.

The fabric shell standard tan (color) exterior and white (color) interior – for military.

The fabric is opaque (translucent or opaque w/ skylight).

Fabric panels for the bays of the structure are designed so the installation and removal can be accomplished with all personnel on the ground.

The fabric panels become integral with the frame during installation so that unexpected winds during installation cannot sail the fabric away

from the frame.

To allow for relocation of the structure after the initial installation fabric or heat-sealing shall not be permitted during installation. Fabric shell

panels and optional inner liner fabric panels shall be capable of being installed, replaced or removed individually with the structure erected and

operational.

Engineering Specs: The structure is designed for constant winds of 90 mph with a utility load of 2 pounds per square foot (psf ) per International

Building Code (IBC). Optional high-wind kit increases wind loading to 120+ mph and snow load kit increases snow loading to 30+ psf ground

snow load.

Anchoring Specs: The structure is designed for installation on a dirt, grass, asphalt using stakes 1” x 40”.

Duckbill (88) type anchors or concrete surfaces using expansion–style anchors. The number, size and strength of the anchors shall be adequate

for the wind and roof load requirements. One set of anchors for concrete is included.

Creative Tent International, Inc.

190 E. Galleria Dr.

Henderson, NV 89011

+1 928.854.3700 Toll Free 888-484-8368

creativetent.us

Creative Tent International, Inc.190 E. Galleria Dr. Henderson, NV 89011

+1 928-854-3700 Toll Free: 888-484-8368 creativetent.us