www.creativetent.usCreative Tent International, Inc.

Design . Engineering . Manufacturer . Sales . Service

Aviation Hangers, Re-Locatable Engineered Structures

®

Installation World Wide

Our VisionCreative Tent International is committed to the success of your mission.

Our MissionWe uphold the customer and the product.

• ClearSpan20’–300’• EngineeredtoIBC12-InternationalBuildingCode• HighWinds-115mph/185kmperhour• AllWeatherConditions• Portable/Re-locatable• Temporary/Permanent

• LightWeight/SmallShippingCube• QuickInstallation• CompleteAccessories• NoConcreteRequired• RoadBaseFlooring80,000psf/36000kgpsf

CreativeTentInternationalInc.hasproductsin56countriesusedbyMilitary,Industrial&AviationCustomers.

© Copyright 2015, Creative Tent International, Inc.

Shasta Shelter® AV SpecificationsShasta Shelter® AV Specifications: There are no internal posts or supports. The structure is a pre-engineered unit requiring no on-site fabrication or welding to install or relocate. This applies to structural frame components, fabric and accessories. The structure is fully re-locatable, allowing for disassembly and reuse of all components (except anchors) without additional fabrication or welding of structural components or fabric. The structure has center line dimensions: Width: ’ Length: ’ Eave Height: ’ Bay Spacing: ’ Center Height: ’

Frame Specs: Frame consists of a series of identical arches, with connecting purlins and cables. The arches or beams have rounded eaves and apex with snap button connections. Frame components for the beams are a hollow oval-beam design made from extruded corrosion-resistant, anodized, lightweight 6061-T6 structural grade aluminum. The extrusion for the beams has integral inner and outer rope edge channels to accommodate exterior (fabric shell) and interior (liner) tensioned fabric panels. The extrusion is designed to allow rapid attachment or relocation of lighting, rigging and other accessories without drilling or welding. Interchangeability / Modularity: Structural components are such that like components can be exchanged within or between like structures. Purlins and shear cables are located on the inside of the fabric shell. Base Plates are anchored prior to frame installation for safety. Beam assemblies snap together on the ground and are tilted up to position after attachment to base plates utilizing a hinge-pin design. Purlins are also attached prior to lifting beam and are set from ground. All structural fasteners are galvanized steel ASTM A325. Anchor bolts conform to ASTM A325 or ASTM A193, Grade B7. Tech screws and other non-structural attachments are standard commercial quality andfinish.Structureiscapableofbeingequippedwithanoptionalhigh-windkitfor increased wind loading and snow-load kit for increased snow loading in extreme conditions, which does not require welding or drilling into the frame.

Fabric Specs:FabricshellisflameresistantasdefinedunderNFPA701.CoatedPVCmaterial weighing at least 22 oz/yd and strong enough to meet the performance characteristics required of the structure. The fabric shell is White or Tan exterior and White interior. The fabric is opaque/blackout. Fabric panels for the bays of the structure are designed so the installation and removal can be accomplished with all personnel on the ground. The fabric panels become integral with the frame during installation so that unexpected winds during installation cannot sail the fabric away from the frame. Fabric shell panels and optional inner liner fabric panels are capable of being installed, replaced or removed individually with the structure erected and operational.

Engineering Specs: The structure is designed for constant winds of 90/115 mph with a utility load of 8 pounds per square foot (psf) per the International Building Code (IBC12). Wind loading to 120+ mph and 20 psf ground snow available. Bay spacing can vary from 10’ to 20’ on center.

Anchoring Specs: The structure is designed for installation on a dirt, grass or asphalt using stakes, Duckbill type anchors or concrete surfaces using expansion style anchors. The number, size and strength of the anchors are adequate for the wind and roof load requirements. One set of anchors for concrete, and one set for ground/asphalt is included.

© Copyright 2015, Creative Tent International, Inc.

Shasta Shelter® AV

1 Gable End

2 Open Ends

1 Fabric Sliding Door - 1 Gable End

W’ x L’ Meters Configuration Units per 20’ Weight Installation Time Aircraft (approx) Container LBS KG PxHxD

20’ x 45’ 6m x 14m 2 Open Ends 6 units per 20’ 1,350 612 4x10x.5 Robinson 44 20’ x 45’ 6m x 14m 1 Fabric Sliding Door 6 units per 20’ 1,800 815 4x10x1

© Copyright 2015, Creative Tent International, Inc.

Shasta Shelter® AV

2 Open Ends

1 Full Width Door – 1 Gable End 2 Full Width Doors

W’ x L’ Meters Configuration Units per 20’ Weight Installation Time Aircraft (approx) Container LBS KG PxHxD 30’ x 45’ 9m x 14m 2 Open Ends 4 units per 20’ 2,025 917 6x10x.75 Robinson 44 30’ x 65’ 9m x 20m 1 FWD - 1 GE 2 unit per 20’ C 3,900 1,767 6x10x1 30’ x 115’ 9m x 35m 2 FWD 1 - 20’ per unit 6,900 3,126 6x10x2

© Copyright 2015, Creative Tent International, Inc.

Shasta Shelter® AV

2 Full Width Doors

2 Open Ends

1 Full Width Door – 1 Gable End

W’ x L’ Meters Configuration Units per 20’ Weight Installation Time Aircraft (approx) Container LBS KG PxHxD 40’ x 45’ 12m x 14m 2 Open Ends 4 units per 20’ 2,700 1,223 6x10x.75 Enstrom 40’ x 65’ 12m x 20m 1 FWD - 1 GE 2 unit per 20’ C 5,200 2,356 6x10x1 40’ x 120’ 12m x 37m 2 FWD 1 - 20’ per unit 9,600 4,349 6x10x2

© Copyright 2015, Creative Tent International, Inc.

Shasta Shelter® AV W’ x L’ Meters Configuration Units per 20’ Weight Installation Time Aircraft (approx) Container LBS KG PxHxD 50’ x 60’ 15m x 18m 2 Open Ends 1.5 units per 20’ 4,500 2,039 6x10x1 Bell 407 50’ x 75’ 15m x 23m 1 FWD - 1 GE 1 - 20’ per unit 7,500 3,398 6x10x1.5 50’ x 150’ 15m x 46m 2 FWD 2 - 20’ per unit 15,000 6,795 6x10x3

2 Open Ends

1 Full Width Door – 1 Gable End2 Full Width Doors

© Copyright 2015, Creative Tent International, Inc.

Shasta Shelter® AV W’ x L’ Meters Configuration Units per 20’ Weight Installation Time Aircraft (approx) Container LBS KG PxHxD 65’ x 60’ 20m x 18m 2 Open Ends 1.5 units per 20’ 5,850 2,650 6x10x1 Bell 412 65’ x 75’ 20m x 23m 1 FWD - 1 GE 1 - 20’ per unit 9,750 4,417 6x10x1.5 65’ x 150’ 20m x 46m 2 FWD 1- 40’ per unit 19,500 8,834 6x10x3

2 Open Ends

1 Full Width Door – 1 Gable End

2 Full Width Doors

© Copyright 2015, Creative Tent International, Inc.

Shasta Shelter® AV

2 Open Ends

1 Full Width Door – 1 Gable End

2 Full Width Doors

W’ x L’ Meters Configuration Units per 20’ Weight Installation Time Aircraft (approx) Container LBS KG PxHxD 75’ x 75’ 23m x 23m 2 Open Ends 1.25 units per 20’ 8,438 3,822 6x10x1.25 S70 75’ x 94’ 23m x 29m 1 FWD - 1 GE 1 - 20’ per unit 14,100 6,387 6x10x2 King Air 350 75’ x 173’ 23m x 52m 2 FWD 1 - 40’ per unit 25,950 11,755 6x10x4

© Copyright 2015, Creative Tent International, Inc.

Shasta Shelter® AV W’ x L’ Meters Configuration Units per 20’ Weight Installation Time Aircraft (approx) Container LBS KG PxHxD 90’ x 90’ 27m x 27m 2 Open Ends 1.25 units per 20’ 12,150 5,504 8x10x1.5 Mi 8, Mi 17 90’ x 115’ 27m x 35m 1 FWD - 1 GE 1 - 20’ per unit 20,700 9,377 8x10x3 90’ x 220’ 27m x 67m 2 FWD 1 - 40’ per unit 39,600 17,939 8x10x6

2 Open Ends

1 Full Width Door – 1 Gable End

2 Full Width Doors

© Copyright 2015, Creative Tent International, Inc.

Shasta Shelter® AV W’ x L’ Meters Configuration Units per 40’ Weight Installation Time Aircraft (approx) Container LBS KG PxHxD 105’ x 105’ 32m x 32m 2 Open Ends 1 - 40’ per unit 16,538 7,491 8x10x2 CH-53 105’ x 125’ 32m x 38m 1 FWD - 1 GE 2 - 40’ per unit 26,250 11,891 8x10x4 105’ x 250’ 32m x 76m 2 FWD 3 - 40’ per unit 52,500 23,783 8x10x8

2 Open Ends

1 Full Width Door – 1 Gable End

2 Full Width Doors

© Copyright 2015, Creative Tent International, Inc.

Shasta Shelter® AV W’ x L’ Meters Configuration Units per 40’ Weight Installation Time Aircraft (approx) Container LBS KG PxHxD 125’ x 150’ 38m x 38m 2 Open Ends 2 - 40’ per unit 28,125 12,741 8x10x3 Gulfstream 125’ x 170’ 38m x 52m 1 FWD - 1 GE 3 - 40’ per unit 42,500 19,253 8x10x6 125’ x 320’ 38m x 97m 2 FWD 5 - 40’ per unit 80,000 36,240 8x10x10

2 Open Ends

1 Full Width Door – 1 Gable End2 Full Width Doors

© Copyright 2015, Creative Tent International, Inc.

Shasta Shelter® AV W’ x L’ Meters Configuration Units per 40’ Weight Installation Time Aircraft (approx) Container LBS KG PxHxD 160’ x 150’ 49m x 45m 2 Open Ends 2 - 40’ per unit 54,000 24,462 8x10x2 C-130 160’ x 165’ 49m x 50m 1 FHD - 1GE 3 - 40’ per unit 92,400 41,857 8x10x5 160’ x 330’ 49m x 100m 2 FHD 5- 40’ per unit 184,800 83,714 8x10x10

2 Open Ends

1 Flat Hangar Door – 1 Gable End

2 Flat Hangar Doors

18” x 18” x 2” squarePuzzle Piece Design

6.4 lbs.

100% Recycled MaterialPolyolefin Thermoplastic 50-100%Other Thermoplastic 0-50%Non-Thermoplastic 0-50%

Black with colored specks

Good

Corner locks snap in toconnect 4 panels

Edge locks snap in toconnect perimeter panels

Locks made of High Strength Nylon

80,276 pounds persquare foot @ 72° F

61,183 pounds persquare foot @ 150° F

557 pounds persquare inch @ 72° F

424 pounds persquare inch @ 150° F

Dry – 0.63. Wet – 0.42

Excellent

Lock Removal ToolReplacement Fork Set (4 Ct.)

5 year limited

H e a v y D u t y F l o o r i n g • r o a D B a s e • a i r c r a F t s t o r a g e

Dimensions

Weight

Material

MilitAry / industriAl

Color

UV Stability

Connection System

Load Capacity

Point Load Capacity

Dynamic Friction

Chemical Resistance

Optional Accessories

Warranty

Supports over 80,000 psf (557 psi), promotes water drainage and provides chemical resistance, deploys anywhere in all weather conditions.

Light, lean and easy to install. The MAX puzzle pieces quickly fit together and lock securely with MAX locking connectors.

Made from recycled materials and is 100% recyclable. MAX wasdesigned to replace concrete and leave a zero footprint to meet today’s green initiatives.

Single and Double - Personnel DoorsComposite Steel DoorsFull Width DoorsFabric Sliding DoorsRoll-Up Doors 50 Hrz or 60 Hrz - Panel Boards Lights w/ Cords and Electrical Outlets LED or Metal HalideSafety Kits

Fabric Ventilation, Wind Driven VentilationElectric VentilationHVAC – 5 ton, 10 ton, 20 ton Systems with Ducting / Wall Duct Sets / Interior Ducting

Insulating Liners - R6 or R16Decreases HVAC requirements as much as 40%

Mesh Windows with Cover Flaps

Plastic Modular 36,000 psfPlastic Modular 80,000 psfPlywood/Lumber/CarpetFabric Moisture BarrierCertified Helicopter Pad

Skylight Tool Kits Dehumidification Systems Containers Generators Solar Packages

Accessories & options

WOrldWIde

Service and Installation Available

Doors and Access

Electrical & Lighting Packages Plug & Play

Systems

Ventilation

Liners

Window & Wall Options

Flooring Systems

SkylightsTool Kits

Dehumidification SystemsContainersGenerators

Solar Packages

Creative Tent International, Inc. is dynamic and responsive to your mission. Over 50 years of experience in design, manufacturing and service to the fabric structure industry. We stand behind our products - 100%. We are field sensitive to onsite environmental conditions, complexity of installation and logistics.

Made in the USA • Designed, Engineered and Manufactured for Superior Quality

www.creativetent.usCreative Tent International, Inc.

Creative Tent International, Inc.451 Mirror Court, Ste. 101Henderson, NV 89011

+1 702-789-2620 Toll Free 888-848-8368 sales@creativetent.us

re-locatable engineered structures