How to use green tape(heat resistance) in eva film glass laminating
12
www.cncglass.com [email protected] GD, CHINA HOW TO USE CNC GREEN TAPE(HEAT RESISTANCE) IN EVA FILM GLASS LAMINATING BY PETER LIN Do you have a video or photograph on how to use this CNC GREEN TAPE in EVA FILM glass laminating? What is the function of the CNC GREEN TAPE for EVA FILM glass laminating? High temperature CNC GREEN TAPE is to fix the pre-laminated glass with EVA FILM, and perfectly prevent the melt EVA FILM overflowing through laminated glass edges in the oven when heating.
description
High temperature CNC GREEN TAPE is to fix the pre-laminated glass with EVA FILM, and perfectly prevent the melt EVA FILM overflowing through laminated glass edges in the oven when heating.
Transcript of How to use green tape(heat resistance) in eva film glass laminating
GD, CHINA
HOW TO USE CNC GREEN TAPE(HEAT RESISTANCE) IN EVA FILM GLASS LAMINATINGBY PETER LIN
Do you have a video or photograph on how to use this CNC GREEN TAPE in EVA FILM glass laminating? What isthe function of the CNC GREEN TAPE for EVA FILM glass laminating?
High temperature CNC GREEN TAPE is to fix the pre-laminated glass with EVA FILM, and perfectly prevent the meltEVA FILM overflowing through laminated glass edges in the oven when heating.
GD, CHINA
If we use the CNC GREEN TAPE to seal the edges of pre-laminated glass to prevent the exit out of the EVA in theglass laminating oven, do we need to make some holes on the CNC GREEN TAPE for vacuuming?
It depends. If you don’t make holes on the CNC GREEN TAPE, and you make EVA laminated glass successfullywithout bubbles, then you don’t need to make holes on the CNC GREEN TAPE, so you can get the cleaner result ofthe edges of the final laminated glass. But if you don’t make holes on the GREEN TPAE, but you face bubbles in thecorners or edges of the laminated glass, then it’s better you make some holes on the CNC GREEN TAPE to helppre-laminated glass vacuuming.
GD, CHINA
What is the specifications of CNC GREEN TAPE?
25mm*66M/roll30mm*66M/roll40mm*66M/roll50mm*66M/roll
Does CNC GREEN TPAE leave glues on the glass?
NO! No left remains of CNC GREEN TAPE on glass surface after peeling off. CNC GREEN TPAE can standcontinuously heating more than 180℃with strong tear resistance.
GD, CHINA
May i have the CNC GREEN TAPE technical datasheet?
TECHNICAL DATASHEET OF CNC GREEN TAPE:
TESTED Item GREEN THERMAL TAPE
Color Green
Sealant Materials Silicone
Sealant Materials Thickness 0.035±0.005mm
Thickness of Tape Sheet 0.06±0.005mm
Temperature Resistance180℃ Continuously heating
200℃ Discontinuously heating
Tear Strength 120 N/25mm
Adhesive Strength 7.5 N/25mm
Elongation 55%
Volage Resistance 5 KV
Insulation Resistance 1,000,000 MΩ
Insulation Grade F
