High temperature pet silicone green tape for safety glass laminating

High Temperature PET Silicone Green Tape for Safety glass laminating

CNC Glass Interlayerwww.cncglass.com [email protected] [email protected] 1]Super Clear EVA Film for safety laminated glassProduct 2]Milky White EVA Film for safety laminated glassProduct 3]Green Tape and Thermal Cleaning Cutter for EVA film safety laminated glass glazing

Green Tape for safety glass laminating

Green Tape is to fix pre-laminated glass with EVA FILM, PVB FILM,SGP FILM.And Green Tape is to perfectly prevent the melt EVA FILM overflowing through laminated glass edges in the oven whenheating. Green Tape is high temperature resistance. CNC Green Tape can stand continuously heating more than 180℃with strong tear resistance.

What is the specifications of Green Tape?25mm*66M/roll

30mm*66M/roll35mm*66M/roll40mm*66M/roll50mm*66M/roll......65mm*66M/roll980mm*66M/roll

If we use the CNC Green Tape to seal the edges of pre-laminated glass to prevent the exit out of the EVA in the glasslaminating oven, will the Green Tape prevent the de-airing vacuuming? do we need to make some holes on the CNCGreen Tape for vacuuming the air out?

It depends. If you don’t make holes on the CNC Green Tape, and you make EVA laminated glass successfully withoutbubbles, then you don’t need to make holes on the CNC Green Tape, so you can get the cleaner result of the edges ofthefinal laminated glass. But if you don’t make holes on the Green Tape, but you face bubbles in the corners or edges ofthe laminated glass, then it’s better you make some holes on the CNC Green Tape to help pre-laminated glassvacuuming.

Does CNC Green Tape leave glues on the glass?NO! No remains left of CNC Green Tape on glass surface after peeling off. CNC Green Tape can stand continuouslyheating more than 180℃ with strong tear resistance.

High temperature pet silicone green tape for safety glass laminating

Science

Transcript of High temperature pet silicone green tape for safety glass laminating