Case study why silicone vacuum blanket cannot vacuuming(eva pvb glass laminating furnace)

Case Study: Why Silicone Vacuum Blanket Cannot Vacuuming(EVA PVB Glass Laminating Furnace)


One customer bought two silicone blanket, but cannot vacuuming, here is his quote:

"Vacuum pump is connected in parallel to 3 blankets. Your old blanket & 2 New once from you.The old blanket is vacuuming perfectly ( The pump is common for all three). But the new blankets wont vacuum at all.The pump is fine."


Reasons and solutions Because the customer don't put anything inside the silicone

blanket, so the silicone blanket is empty. And the smooth face is inside,if you don't put some mesh on the vacuum hole, it may cause the vacuum hole is sealed by the down silicone sheet itself.

We ask our cusomters to put thermal mesh)insdie the silicone blanket and on the vacuum hole. And the problem is solved.


When you order silicone blanket, you can decide if you want "the smooth face inside silicone blanket, and cloth face outside silicone blanket." Or you want "the cloth face inside silicone blanket, and smooth face outside silicone blankets."

Usually, We produce the silicone blankets with smooth face inside silicone blankets, and cloth face outside silicone blankets.


UOLIN GLASS SUPPORTGUANGDONG, CHINA [email protected]@GMAIL.COMSKYPE: WECAN360MOB: 0086 13612573215Products: 1)-Silicone Vacuum Blanket/Bag, Silicone rubber sheet, 2)-Edging wheels,Polishing Wheels, 3)-Cerium Oxide CeO2 Polishing powder

Case study why silicone vacuum blanket cannot vacuuming(eva pvb glass laminating furnace)

Business

Transcript of Case study why silicone vacuum blanket cannot vacuuming(eva pvb glass laminating furnace)