Hilti Anchor Selector

8/9/2019 Hilti Anchor Selector

1/12

Anchor selector

10 / 20128

Anchor selector

Anchor type Base material Approvals Appl ication

Crackedconcrete

Uncrackedconcrete

Lightweightconcrete

Aeratedconcrete

Solidbrickmasonry

Hollow

brickmasonry

Pre-stressedconcretehollowdeck

EuropeanTechnicalApproval

Seismicapproval

Fatigueapprovalortestreport

Shockapproval

Firetested

Mechanical anchor systemsHeavy duty anchors

HDA-T/ -TR/TF/-P/-PR/-PFundercut anchor

Anchor fastening for highloads e.g. in steelconstruction and plantconstruction

HSL-3 heavy duty anchor Fastening heavy loads e.g.from columns, high racks,machines

HSL-GR heavy duty anchor Fastening heavy loads

Medium and light dutyanchors

HSC-A(R) /-I(R) safety anchor Safety relevant fastening atfacades and ceilings whereshort embedment depth isrequired

HST/-R/-HCR stud anchor Fastening through in placeparts e.g. angles, tracks,channels, wooden beams,

etc.

HSA/-R/-R2/-F stud anchor Fastening through in placeparts like wooden beams,metal sections, columns,brackets, etc.

HSV stud anchor Fastening through in placeparts

HLC sleeve anchor Temporary fastenings inconcrete (e.g. formwork),fastening in base material of

low density

= technical report 1) redundant fastening


2/12

Anchor selector

10 / 2012 9

Advantages Dri ll bi t

diameter resp.anchor size

Specification Setting Page

Steel,galvanised

Steel,sheradised,

hotdippedgalv.

StainlesssteelA2(1.4303)


HCR

steel(1.4529)

Externalthread

Internalthread

Pre-setting

Through-fastening

Automatic undercutting High load capacity Approved for all dynamic loads

Drill bit dia.:20 37 mmAnchor size:M10 M20

72

Integrated plastic section totelescope and pull down tightly

The bolt can be retorqued


88

Integrated plastic section totelescope and pull down tightly The bolt can be retorqued


100

Automatic undercutting Small edge distances and

spacings Small setting depth


110

Quick and simple settingoperation

Setting mark

Safety wedge for certain followup expansion

Drill bit dia.:8 24 mmAnchor size:

M8 M24

130

Three setting depths Setting mark Extremely ductile steel for high

bending capacity


140

Quick and simple settingoperation

Drill bit dia.:8 1 6 m mAnchor size:M8 M16

160

Short setting and removingoperation

Good loads in green concrete

Bridging of gaps

Drill bit dia.:6,5 20 mmAnchor size:

M5 M16

170


3/12

Anchor selector

10 / 201210

Anchor type Base material Approval Appl ication

Crackedconcrete

Uncrackedconcrete

Lightweightconcrete

Aeratedconcrete

Solidbrickmasonry

Hollow

brickmasonry


EuropeanTechnicalAp

proval

Seismicapproval

Fatigueapprovalortes

treport

Shockapproval

Firetested


HAM hard sleeve anchor Secure fastenings in variousbase materials

HUS-HR screw anchor, stainlesssteel

Fastening channels,brackets, racks, seating

HUS screw anchor, carbon steel Fastening channels,brackets, racks, seating

HUS- 6 screw anchor, redundantfastening

1)

Fastening channels,brackets, racks, seating

HUS 6 / HUS-S 6 screw anchor 1)

Fastening light channels,brackets, interior panellingor cladding

HKD push-in anchor 1) Fastening with threadedrods for pipe suspensions,air ducts, suspendedceilings

HKV push-in anchor Fastening with threadedrods for pipe suspensions,air ducts, suspendedceilings

HUD-1 universal anchor Various applications

HUD-L universal anchor Various applications



4/12

Anchor selector

10 / 2012 11

Advantages Dri ll bi tdiameter resp.

anchor size


Steel,galvanised

Steel,sheradised,

hotdippe

dgalv.



HCR

steel(1.4529)

Externalthread

Internalthread

Pre-setting

Through-fastening

Wings to prevent spinning in the

bore hole Plastic cap in cone to prevent

dust entrance

Drill bit dia.:12 20 mm

Thread:M6 M12

176

Screw driven straight into basematerial

Forged on washer Matched system of screw

anchor and screw driver


178





194




Drill bit dia.:6 mm

218


Small drill bit diameter Matched system of screw


Drill bit dia.:6 mm

224

Visual verification of fullexpansion Small setting depth


230

Visual verification of fullexpansion

Small setting depth


252

Fast setting Flexibility of screw length An anchor for every base

material


256

Fast setting

Flexibility of screw length An anchor for every base

material

Drill bit dia.:

6 10 mm

262


5/12

Anchor selector

10 / 201212


Crackedconcrete

Uncrackedconcrete

Lightweightconcrete

Aeratedconcrete

Solidbrickmasonry

Hollow

brickmasonry


EuropeanTechnicalAp

proval

Seismicapproval


treport

Shockapproval

Firetested


HLD light duty anchor Fastenings to weak materialwith cavities

HRD-U/-S frame anchor Securing support frames,timber frames, fascadepanels, curtain walling

HRD frame anchor 1)

On most hollow and solidbase material

HPS-1 impact anchor Fastening wood battens,components for electricaland plumbing installations

HHD-S cavity anchor Fastening battens, channelspanels

HCA coil anchor Temporary externalfastenings

HSP/HFPdrywall plug Fastenings in dry walls

HA8 ring/ hook anchor 1)

For suspended ceilings andother items from concreteceilings

DBZ wedge anchor 1)

Suspension from concreteceilings e.g. using steelstraps, punched band,Nonius system hanger

HT metal frame anchor Fastening door and window

frames



6/12

Anchor selector

10 / 2012 13


anchor size


Steel,galvanised

Steel,sheradised,

hotdippe

dgalv.



HCR

steel(1.4529)

Externalthread

Internalthread

Pre-setting

Through-fastening

Flexibility of screw length Resilient toggling action to suit

every base material

Drill bit dia.:10 mm

266

Preassembled with screw Screw of steel strength 5.8 or

stainless steel A4 (1.4401)

Drill bit dia.:10 and 14 mm

270

impact and temperatureresistant

high quality plastic

Drill bit dia.:8 1 0 m m

276

impact and temperatureresistant

high quality plastic

4 8 mm 294

Controlled setting Deliverable with or without

prefitted screw


298

Re-usable Removable

Drill bit dia.:16 mm

300

Self-drilling tip One bit for anchor and screw Removable

- 302

Quick and easy setting Automatic follow up expansion

Drill bit dia.:8 mm

304

Small drill bit diameter Quick setting by impact

extension Automatic follow up expansion

Drill bit dia.:6 mm

308

No risk of distortion or forces of

constraint Expansion cone can not be lost

Drill bit dia.:

8 10 mm

312


7/12

Anchor selector

10 / 201214


Crackedconcrete

Uncrackedconcrete

Lightweightconcrete

Aeratedconcrete

Solidbrickmasonry

Hollow

brickmasonry


EuropeanTechnicalAp

proval

Seismicapproval


treport

Shockapproval

Firetested


HK ceiling anchor 1)

Fastening of suspendedceilings, cable trays, pipes

HPD aerated concrete anchor Various fastenings

HKH hollow deck anchor Suspension from pre-stressed concrete hollowdecks

HTB Ingenious and strong forhollow base materials

Insulation fasteners

IDP insulationfastener

Fastening of hard, selfsupporting insulatingmaterials

IZ expandable insulation fastener Fastening of soft and hard,self supporting insulatingmaterials

IDMS / IDMR insulation fastener Fastening of soft and hard,self supporting insulatingmaterials and non selfsupporting insulationmaterials

e per application = technical report 1) redundant fastening


8/12

Anchor selector

10 / 2012 15


anchor size


Steel,galvanised

Steel,sheradised,

hotdippe

dgalv.



HCR

steel(1.4529)

Externalthread

Internalthread

Pre-setting

Through-fastening

Small bore hole Quick and easy setting

Drill bit dia.:6 mm

M6

316

Approved (DIBt) Fire resistance Immediately loadable

WithoutpredrillingThread:M6 M10

322

Approval for single pointfastenings

Approved for sprinkler systems

Drill bit dia.:10 14 mmThread:M6 M10

328

Load carried by strong metalchannel and screw

Convincing simplicity whensetting


332

One piece element Corrosion resistant No heat bridge

Drill bit dia.:8 mm insulatingmaterialthickness10 150mm

336

Corrosion resistant No heat bridge Reliable bonding of plaster

Drill bit dia.:8 mm insulatingmaterialthickness

up to 180mm

340

One piece element Corrosion resistant Fire resistant

Drill bit dia.:8 mm insulatingmaterialthicknessup to 150mm

344


9/12

Anchor selector

10 / 201216


Crackedconcrete

Uncrackedconcrete

Lightweightconcrete

Aeratedconcrete

Solidbrickmasonry

Hollow

brickmasonry


EuropeanTechnicalAp

proval

Seismicapproval


treport

Shockapproval

Firetested

Adhesive anchor systems

Foil capsule systems

HVZadhesiveanchor

Heavy-duty fastenings withsmall spacing and edgedistances

HVUadhesiveanchor

Heavy duty fastenings withsmall spacing and edgedistances

Injection mortar systems

HIT-RE500SD

Adhesive anchor in crackedconcrete

HIT-RE500

Adhesive anchor

HIT-HY200


table per application = technical report 1) redundant fastening


10/12

Anchor selector

10 / 2012 17


anchor size


Steel,galvanised

Steel,sheradised,

hotdippe

dgalv.



HCR

steel(1.4529)

Externalthread

Internalthread

Pre-setting

Through-fastening

No expansion pressure Small edge distances and

spacing A strong and flexible foil capsule

M10 M20 350

No expansion pressure Small edge distances and

spacing A strong and flexible foil capsule

HAS M8 M39HIS-M8 - M20Rebar dia.8 40 mm

362

No expansion pressure Long working time

HIT-V M8 M30HIS-M8 - M20Rebar dia.8 3 2 m m

382

No expansion pressure Long working time

HIT-V M8 M39HIS-M8 - M20Rebar dia.8 40 mm

424

No expansion pressure Flexibility in terms of working

time No styrene content No plasticizer content Environmental protection due to

the minimized packaging


490


11/12

Anchor selector

10 / 201218


Crackedconcrete

Uncrackedconcrete

Lightweightconcrete

Aeratedconcrete

Solidbrickmasonry

Hollow

brickmasonry


EuropeanTechnicalAp

proval

Seismicapproval


treport

Shockapproval

Firetested

Injection mortar systems

HIT-HY150 MAX


HIT-CT 1 Hilti Clean technologyadhesive anchor

HIT-HY150

Adhesive anchor

HIT ICE Adhesive anchor for lowinstallation temperatures

HIT-HY70

Universal mortar for solidand hollow brick



12/12

Anchor selector

10 / 2012 19


anchor size


Steel,galvanised

Steel,sheradised,

hotdippe

dgalv.



HCR

steel(1.4529)

Externalthread

Internalthread

Pre-setting

Through-fastening

No expansion pressure No styrene content No plasticizer content Environmental protection due to


HIT-V M8 M30HIS-M8 - M20

Rebar dia.8 2 5 m m

560

No expansion pressure Environmentaly and user

friendly: clean of criticalhazardous substances

HIT-V M8 M24 616

No expansion pressure No styrene content No plasticizer content Environmental protection due to



632

No expansion pressure HAS M8 M24HIS-M8 - M20Rebar dia.8 2 5 m m

674

No expansion pressure mortar filling control

with HIT-SC sleeves

Drill bit dia.:10 22 mmThread:M6 M12

708

Hilti Anchor Selector

Documents

Transcript of Hilti Anchor Selector