EN TRAINING EU REV 1 2020 V1 - DENSO Robotics Europe
Transcript of EN TRAINING EU REV 1 2020 V1 - DENSO Robotics Europe
www.densorobotics-europe.com
EN_TRAINING_EU_REV_1_2020_V1
Headquarters:
DENSO Robotics Europe I DENSO EUROPE B.V.
Waldecker Str. 9, 64546 Moerfelden-Walldorf, Germany
t: +49 (0) 6105 27 35 150 f: +49 (0) 6105 27 35 180
@: [email protected] (commercial information)
@: [email protected] (technical support)
www.facebook.com/DENSORoboticsEurope
www.twitter.com/densoroboticseu
www.youtube.com/DENSORoboticsEurope
www.linkedin.com/company/denso-robotics-europe
Germany (Headquarters) Austria I Benelux I Czech Republic (covers Slovakia & Poland) I Denmark (covers Norway) I Finland I France I Israel I Italy I Lithuania
(covers Latvia) I Romania (covers Hungary) I Russia (covers all Russian speaking countries) I Serbia (covers Slovenia, Croatia, Bosnia &
Herzegovina, Montenegro, Macedonia & Bulgaria) I Spain I Sweden I Switzerland I Turkey I United Kingdom (covers Ireland)
The QR-Code's inventor
Watch our latest videos
TRAINING BROCHURE - ENGLISH
www.densorobotics-europe.com
English
Targeted Personnel: Robot Operators
Seminar Duration: 1 Day at DENSO Training Centre, 9:00 AM - 5:00 PM
Contents: ■ Safety Precautions and safe operating of Robots
■ Fundamentals of Robots
■ Fundamentals of Robot Controller
■ Menu Structure of Teach Pendant
■ Robot Co-ordinate Systems
■ Manual Operation of Robot in different Coordinate Systems
■ Teaching of Positions
■ Starting and Stopping of Robot Programs
■ Handling basic Errors and Error Logs
No. of Participants: 2 - 6 Persons
Contact: Customer Support Team
@: [email protected] t: +49 (0) 6105 2735 150
OPERATOR TRAINING
1
■ Robot System with RC8A Controller
■ Robot / Operating
www.densorobotics-europe.com
TRAI
NING
BRO
CHUR
E
2
BASIC TRAINING
Targeted Personnel: Robot Operator / Programmer
Seminar Duration: 2 Days at DENSO Training Centre, 9:00 AM - 5:00 PM
Contents: ■ Safety Precautions and Safe Operating of Robots ■ Calibration of a Robotsystem (CALSET) ■ Robot Co-ordinate Systems ■ Handling Errors and Error Logs ■ Teaching of Positions ■ Creating New PACscript-Projects ■ Movement Commands (MOVE L, MOVE P, DEPART, APPROACH…) ■ Accuracy / smoothing of movements ■ Teach Check Operating Mode ■ Program Execution in Auto Mode ■ Timer Commands (DELAY, WAIT) ■ Working with Wincaps III (Configuration, Programming, Simulation) ■ Digital I/O’s (SET, RESET, WAIT) ■ Velocity Control Statements (SPEED, ACCEL, DECEL) ■ Working with User-Defined Co-ordinate Systems ■ Collision areas (AREA), Functions Virtual Fence and Exclusive Control
■ Singularity
No. of Participants: 2 - 6 Persons
Contact: Customer Support Team @: [email protected] t: +49 (0) 6105 2735 150
3
■ Robot System with RC8A Controller / Robot Software WINCAPS III
■ Robot / Operating / Programming
www.densorobotics-europe.com
TRAI
NING
BRO
CHUR
E
4
ADVANCED TRAINING
■ Robot System with RC8A Controller / Robot Software WINCAPS III
■ Robot / Programming / Interfaces
Targeted Personnel: Programmer [DENSO Basic Training is a pre-requisite]
Seminar Duration: 2 Days at DENSO Training Centre, 9:00 AM - 5:00 PM
Contents: ■ Structured Programming ■ Loops and Branching (FOR...NEXT, DO...LOOP, IF THEN ELSE, …) ■ Local and Global Variables, Header Files ■ Subprograms and Calling Subprograms (CALL …) ■ Instructions (@a, WAITMOTION, MOTIONSKIP, ...) ■ User-Defined Error Messages ■ Supervisory Tasks (TSR) ■ Usage of Periphery Interfaces (Mini I/O, Ethernet, Profinet…) ■ External Control using various Interfaces ■ Working with System variables (CURRPOS, SYSSTATE…) ■ Force Control (CURLMT, FORCECTRL) ■ Using Predefined Functions (Palletizing, Axis Enable...) ■ Safety Motion ■ Panel Designer
No. of Participants: 2 - 6 Persons
Contact: Customer Support Team @: [email protected] t: +49 (0) 6105 2735 150
5
www.densorobotics-europe.com
TRAI
NING
BRO
CHUR
E
PLC OR SEQUENCER
Pro�Bus
Parallel I/O
Ethernet IP
Device Net
RS232
Conveyor Tracking
TEACHING PENDANT
MINI PENDANT
PCI EXTENSION CARDS OPTIONAL
USB X2
ETHERNET
RS-232C
PARALLEL I/O SIGNAL24/24 standard40/48 optional
6
■ Robot / Robot Software Cobotta World
■ Robot / Controller / Programming
Targeted Personnel: Operator
Seminar Duration: 1 Day at DENSO Training Centre, 9:00 AM - 5:00 PM
Content: ■ Safety Precautions and Safe Operating of Robots
■ Commissioning of COBOTTA
■ Direct teaching of positions
■ Handling the COBOTTA gripper
■ Handling the COBOTTA camera
■ Working with the programming software COBOTTA World
■ Creating COBOTTA World Programs (loop, IOs)
■ Configuration of COBOTTA with the safety parameter tool
No. of Participants: 2 - 6 Persons
Contact: Customer Support Team @: [email protected] t: +49 (0) 6105 2735 150
7
COBOTTA WORLD TRAINING
8www.densorobotics-europe.com/de
TRAI
NING
BRO
CHUR
E
■ Robot / Robot Software WINCAPS III
■ Robot / Controller / Programming
Targeted Personnel: Robot Operator / Programmer
Seminar Duration: 2 Days at DENSO Training Centre, 9:00 AM - 5:00 PM
Contents: ■ Safety Precautions and Safe Operating of Robots ■ Working with COBOTTA ■ Robot Coordinate Systems ■ Handling Errors and Error Logs ■ Teaching of Positions ■ Creating New PACscript-Projects ■ Movement Commands (MOVE L, MOVE P, DEPART, APPROACH…) ■ Accuracy / smoothing of movements ■ Teach Check Operating Mode ■ Program Execution in Auto Mode ■ Timer Commands (DELAY, WAIT) ■ Working with Wincaps III (Configuration, Programming, Simulation) ■ Digital I/O’s (SET, RESET, WAIT) ■ Velocity Control Statements (SPEED, ACCEL, DECEL) ■ Working with User-Defined Coordinate Systems ■ Collision areas (AREA), Functions Virtual Fence and Exclusive Control ■ Singularity
No. of Participants: 2 - 6 Persons
Contact: Customer Support Team @: [email protected] t: +49 (0) 6105 2735 150
9
COBOTTA BASIC TRAINING
10www.densorobotics-europe.com/de
TRAI
NING
BRO
CHUR
E
Targeted Personnel: Programmer[DENSO Basic & Advanced training is a pre-requisite]
Seminar Duration: 1 Day at DENSO Training Centre, 9:00 AM - 5:00 PM
Contents: ■ Hardware Explanation
■ Commissioning of Conveyor tracking system
■ Sensor tracking
■ Vision Guided tracking
■ Conveyor tracking with Master/Slave System
■ Explanation of special conveyor tracking commands
■ Practical Exercises
No. of Participants: max. 2 Persons
Contact: Customer Support Team @: [email protected] t: +49 (0) 6105 2735 150
■ Robot System with RC8A Controller / Robot Software Wincaps III
■ Robot / Operating / Programming
CONVEYOR TRACKING TRAINING
11
www.densorobotics-europe.com
TRAI
NING
BRO
CHUR
E
12
MAINTENANCE TRAINING
■ Robot System with RC8A Controller/ Robot Software WINCAPS III
■ Robot / Controller / Components
Targeted Personnel: Maintenance / Operator
Seminar Duration: 1 Day 4axis and 1 Day 5/6axis DENSO Training Centre, 9:00 AM - 5:00 PM
Contents: ■ Constructional overview of Robots [Mechanical /Electrical]
■ Adjustment and calibration of Robot Components
■ Exchange of mechanical and electrical parts
■ Troubleshooting of real time Mechanical and Electrical problems
No. of Participants: 2 - 4 Persons
Contact: Customer Support Team @: [email protected] t: +49 (0) 6105 2735 150
13
www.densorobotics-europe.com
TRAI
NING
BRO
CHUR
E
14
ORiN2
■ Robot System with RC8A Controller / Robot Software WINCAPS III
■ Robot / Controller / Programming
Targeted Personnel: Programmer
Seminar Duration: 1 Day at DENSO Training Centre, 9:00 AM - 5:00 PM
Contents: ■ Preparing the Robot Controller for working with ORIN
■ Establishing communication with the Controller through ORIN
■ Variable Read and Write
■ Moving the Robot through ORIN
■ Program Start and Stop
No. of Participants: 2 - 6 Persons
Contact: Customer Support Team @: [email protected] t: +49 (0) 6105 2735 150
15
www.densorobotics-europe.com
TRAI
NING
BRO
CHUR
E
16
PLC Sensor Monitor
Development tools
Application interface
Device interface
FA devices
Robot Camera
TRAINING CALENDAR 2020
17
JANUARY FEBRUARY MARCH
1 We New Year 1 Sa 1 Su
2 Th 2 Su 2 Mo Basic Training 10
3 Fr 3 Mo 6 3 Tu Basic Training
4 Sa 4 Tu Basic Training 4 We Advanced Training
5 Su 5 We Basic Training 5 Th Advanced Training
6 Mo 2 6 Th Advanced Training 6 Fr
7 Tu 7 Fr Advanced Training 7 Sa
8 We 8 Sa 8 Su
9 Th 9 Su 9 Mo 11
10 Fr 10 Mo 7 10 Tu
11 Sa 11 Tu 11 We
12 Su 12 We 12 Th
13 Mo Basic Training 3 13 Th 13 Fr
14 Tu Basic Training 14 Fr 14 Sa
15 We Advanced Training 15 Sa 15 Su
16 Th Advanced Training 16 Su 16 Mo 12
17 Fr 17 Mo 8 17 Tu
18 Sa 18 Tu 18 We
19 Su 19 We 19 Th
20 Mo 4 20 Th 20 Fr
21 Tu 21 Fr 21 Sa
22 We 22 Sa 22 Su
23 Th 23 Su 23 Mo 13
24 Fr 24 Mo 9 24 Tu
25 Sa 25 Tu 25 We
26 Su 26 We 26 Th
27 Mo 5 27 Th 27 Fr
28 Tu 28 Fr 28 Sa
29 We 29 Sa 29 Su
30 Th 30 Mo 14
31 Fr 31 Tu
www.densorobotics-europe.com
TRAI
NING
BRO
CHUR
E
18
APRIL MAI JUNE
1 We 1 Fr Labour Day 1 Mo Pentecost Monday 23
2 Th 2 Sa 2 Tu Basic Training
3 Fr 3 Su 3 We Basic Training
4 Sa 4 Mo Basic Training 19 4 Th Advanced Training
5 Su 5 Tu Basic Training 5 Fr Advanced Training
6 Mo Basic Training 15 6 We Advanced Training 6 Sa
7 Tu Basic Training 7 Th Advanced Training 7 Su
8 We Advanced Training 8 Fr 8 Mo 24
9 Th Advanced Training 9 Sa 9 Tu
10 Fr Good Friday 10 Su 10 We
11 Sa 11 Mo 20 20 Th Corpus Christi
12 Su 12 Tu 12 Fr
13 Mo Easter Monday 13 We 13 Sa
14 Tu 16 14 Th 14 Su
15 We 15 Fr 15 Mo 25
16 Th 16 Sa 16 Tu
17 Fr 17 Su 17 We
18 Sa 18 Mo 21 18 Th
19 Su 19 Tu 19 Fr
20 Mo 17 20 We 20 Sa
21 Tu 21 Th Ascension Day 21 Su
22 We 22 Fr 22 Mo 26
23 Th 23 Sa 23 Tu
24 Fr 24 Su 24 We
25 Sa 25 Mo 22 25 Th
26 Su 26 Tu 26 Fr
27 Mo 18 27 We 27 Sa
28 Tu 28 Th 28 Su
39 We 29 Fr 29 Mo 27
30 Th 30 Sa 30 Tu
31 Su Pentecost
indication without guarantee
TRAINING CALENDAR 2020
19
JULY AUGUST SEPTEMBER
1 We 1 Sa 1 Tu
2 Th 2 Su 2 We
3 Fr 3 Mo Basic Training 32 3 Th
4 Sa 4 Tu Basic Training 4 Fr
5 Su 5 We Advanced Training 5 Sa
6 Mo Basic Training 28 6 Th Advanced Training 6 Su
7 Tu Basic Training 7 Fr 7 Mo Basic Training 37
8 We Advanced Training 8 Sa 8 Tu Basic Training
9 Th Advanced Training 9 Su 9 We Advanced Training
10 Fr 10 Mo 33 10 Th Advanced Training
11 Sa 11 Tu 11 Fr
12 Su 12 We 12 Sa
13 Mo 29 13 Th 13 Su
14 Tu 14 Fr 14 Mo 38
15 We 15 Sa 15 Tu
16 Th 16 Su 16 We
17 Fr 17 Mo 34 17 Th
18 Sa 18 Tu 18 Fr
19 Su 19 We 19 Sa
20 Mo 30 20 Th 20 Su
21 Tu 21 Fr 21 Mo 39
22 We 22 Sa 22 Tu
23 Th 23 Su 23 We
24 Fr 24 Mo 35 24 Th
25 Sa 25 Tu 25 Fr
26 Su 26 We 26 Sa
27 Mo 31 27 Th 27 Su
28 Tu 28 Fr 28 Mo 40
29 We 29 Sa 29 Tu
30 Th 30 Su 30 We
31 Fr 31 Mo 36
w
www.densorobotics-europe.com
TRAI
NING
BRO
CHUR
E
20
OCTOBER NOVEMBER DEZEMBER
1 Th 1 Su 1 Tu
2 Fr 2 Mo Basic Training 45 2 We
3 Sa German Unification Day 3 Tu Basic Training 3 Th
4 Su 4 We Advanced Training 4 Fr
5 Mo 41 5 Th Advanced Training 5 Sa
6 Tu 6 Fr 6 Su
7 We 7 Sa 7 Mo Basic Training 50
8 Th 8 Su 8 Tu Basic Training
9 Fr 9 Mo 46 9 We Advanced Training
10 Sa 10 Tu 10 Th Advanced Training
11 Su 11 We 11 Fr
12 Mo Basic Training 42 12 Th 12 Sa
13 Tu Basic Training 13 Fr 13 Su
14 We Advanced Training 14 Sa 14 Mo 51
15 Th Advanced Training 15 Su 15 Tu
16 Fr 16 Mo 47 16 We
17 Sa 17 Tu 17 Th
18 Su 18 We 18 Fr
19 Mo 43 19 Th 19 Sa
20 Tu 20 Fr 20 Su
21 We 21 Sa 21 Mo 52
22 Th 22 Su 22 Tu
23 Fr 23 Mo 48 23 We
24 Sa 24 Tu 24 Th
25 Su 25 We 25 Fr Christmas Day
26 Mo 44 26 Th 26 Sa Day after Christmas
27 Tu 27 Fr 27 So
28 We 28 Sa 28 Mo 53
29 Th 29 Su 29 Tu
30 Fr 30 Mo 49 30 We
31 Sa 31 Th
indication without guarantee
ORIN 2WHERE WE ARE
DENSO ROBOTICS EUROPE I DENSO EUROPE B.V.
Waldecker Str. 9
64546 Moerfelden-Walldorf
Germany
t: +49 (0) 6105 2735 150
f: +49 (0) 6105 2735 180
@: info@densorobotics-europe-com (commercial information)
@: [email protected] (technical support)
w: www.densorobotics-europe.com
21
www.densorobotics-europe.com
TRAI
NING
BRO
CHUR
E
NH HOTELFrankfurt/Moerfelden Hessenring 964546 Moerfelden-WalldorfGERMANY
t: +49 (0) 6105 204-0f: +49 (0) 6105 204-100 @: [email protected] w: www.nh-hotels.de
EXPRESS BY HOLIDAY INNFrankfurt Airport Hessenring 9Langener Strasse 20064546 Moerfelden-WalldorfGERMANY
t: +49 (0) 6105 966-0f: +49 (0) 6105 966-100@: [email protected] w: www.hiexpress.de
HOTELS NEARBY
22