Innovation digitale et design à l’ère de l’open innovation.

1st edition 18-19 JUNE CASABLANCA

Paper’s titleAuthor’s First Name(s) LAST NAMEa, Second Author’s First Name(s) LAST NAME*b and Third Author’s First Name(s) LAST NAME a

a University’s Name for the Authors ‘a’; b University’s Name for the Author ‘b’

Write directly into the template in French or English. Alternatively copy your finished text into it: Copy and paste by choosing ‘match destination formatting’. Do not change the predefined formatting settings in this document (such as paper size, orientation, margins, typeface, size, indents, spacing, headings, etc.). Please use the predefined formatting styles instead of applying your individual settings. These styles are with pre-defined with ‘X’, such as X Abstract or X Paragraph.

Insert your abstract into this section. These guidelines provide instruction to help you to format your full paper for the Conference which is hosted in CASABLANCA

The aim is to produce electronic conference booklet of the abstracts only, including the programme and other important information. In the conference programme booklet each entry will provide the following information: (i) Paper title; (ii) Author name(s); (iii) Author’s affiliation; (iv) Contact information; (v) Abstract (should be no more than 200 words). Please avoid citing references in your abstract. This abstract includes 201 words.

Keywords: Paper format; instructions; use of template

* Corresponding author: Name | e-mail: first.last@esca.ma

Copyright © 2020. Copyright in each paper on this conference proceedings is the property of the author(s). Permission is granted to reproduce copies of these works for purposes relevant to the above conference, provided that the author(s), source and copyright notice are included on each copy. For other uses, including extended quotation, please contact the author(s).

AUTHOR’S NAMEs [X Running head Even]

Introduction [this is formatted as X Heading 1]You have been invited to submit a paper for Innovation digitale et design à l’ère de l’open innovation

conference. All submissions will be double blind peer reviewed by members of the international review panel. Therefore,

for this full paper submission do NOT fill author(s) names! [this paragraph is formatted as X Paragraph]We require you to submit your paper electronically in Word format using this template. The full papers should

be between 4000–6000 words in length plus references.This instruction itself uses the same formatting as required for the Conference. This is a paragraph, formatted

using style named ‘X Paragraph’. They are all indented. Write directly into the template. Alternatively, place your finished text into it: Copy and paste by choosing ‘match destination formatting’. Do not change the predefined formatting settings in this document (such as paper size, orientation, margins, typeface, size, indents, spacing, headings, etc.). Please use the predefined formatting styles instead of applying your individual settings.

Literature references should be placed in parentheses (Author, 2000) within the main text, adhering to the same format specifications as found in the rest of the text. Note that the line spacing is single throughout the document.

Paper Layout and Styles [x Heading 2]The required settings such as paper size, margins and styles are embedded in this template. You do not have to

make any changes to these settings. This paper template is an example of a properly formatted paper. The page size is 160x210mm, the margins are: top 10mm, bottom 10mm, left 15mm, right 15mm, gutter 10mm left.

ReferencingFollow the APA 6 Manual of Style author-date documentation system (http://www.apastyle.org/).Short quotations within the text should be marked with quotation marks: Lawson also has a broad

understanding of design when he mentions ‘Professional designers such as architects, fashion designers and engineers’, at the same time as he points out ‘… yet design is also an everyday activity that we all do… All these everyday domestic jobs can be seen as design tasks or at least design-like tasks’ (Lawson, 2004, p. 5). Do not use quotation marks for long quotations:

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.

. (du garry, fely, jonas, donald, & libera, 1997, p. 24)

If you use reference management software such as EndNote or Word Citation & Bibliography make sure that you submit document without the fields linked to your bibliographical database.

For indirect quotation/paraphrasing – please do not use quotation marks. Page numbers are optional when paraphrasing, although it is useful to include them. For example, Allen (cited in Ulrich & Eppinger, 2004, p. 64) claims that as physical distance of project team members increases, the frequency of communication amongst team members decreases.

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.

This is provides an example format for a book or report by a corporate author Rust, Mottram and Till (2009) produced a report titled ‘Practice-Led Research in Art, Design and Architecture’.

2

Article’s title [X Running head odd]

Conference paper by Terry (2012) titled ‘Managing by design – enacted through situated networks’ was presented.

If DOI is available with a journal article such as with article written by Tovey, M., Porter, S., & Newman, R. (2003) then please include it with the reference.

‘Why Design Education Must Change’ written by Norman (2010) is an example of electronic article/we.If English is not your first language, or you are not fluent in references, we urge you to send your paper to

Scribendi (http://www.scribendi.com) or a similar proof-reader before submission.

Figures and Tables [formatted as X Heading 3]

Figure X Use style ‘X Caption’. Captions are placed under the pictures. If you need to reference the picture/image source, then do so. Preferably place/rearrange figure and caption to the top of the page. Acknowledge your source: Source: Author (XXXX, p. XX).

After you insert a picture into the document, select it and use style named ‘X Picture’. Pictures are followed by a caption. The figures should be numbered Figure 1, Figure 2, etc. Since the proceedings are going to be distributed electronically you are welcome to use colour pictures. However, ensure that these are in good enough resolution so they when these are printed they are legible.

Table 1 Rough suggestion for table layout. Captions for Tables are placed above it. Use style ‘X Table title’.

Table Rows Cell one Cell twoSecond Row Second Column Third ColumnThird Row 2 3Fourth Row

Bullet Lists [this is formatted as X Heading 3]

Bullet list item [this formatted as X Billet list] Bullet list item Bullet list item

Acknowledgements: this section is optional. You can use this section to acknowledge help from you colleges, student’s participation, internal or external partners’ contribution or funding which supported the research outlined in this paper.

References [x Heading 1]Buchanan, R. (2015). Worlds in the Making: Design, Management, and the Reform of Organizational Culture. She Ji:

The Journal of Design, Economics, and Innovation, 1(1), 5-21.Cooper, R., Junginger, S., & Lockwood, T. (Eds.). (2013). The handbook of design management. A&C BlackDiMaggio P. & Powell (1991) Introduction, in W. Powell & DiMaggio (Eds.), The New Institutionalism in

Organizational Analysis, Chicago University Press, 1-38.Dirlik, A. (1994). The postcolonial aura: Third World criticism in the age of global capitalism. Critical inquiry, 20(2),

328-356.Ember, C. R. (2009). Cross-cultural research methods. Rowman Altamira. Bjögvinsson, E., Ehn, P., & Hillgren, P. A.

(2012).Er, H. Alpay. (1994). The emergence and development of patterns of industrial design in Newly Industrialised

Countries with reference to Turkey (Doctoral dissertation, Manchester Metropolitan University).Hasdoğan, G. (2009). The institutionalization of the industrial design profession in Turkey: Case study–the Industrial

Designers Society of Turkey. The Design Journal, 12(3), 311-337.

3

AUTHOR’S NAMEs [X Running head Even]

Itten, J. (1975). Design and form: The basic course at the Bauhaus and later. John Wiley & Sons.Ulrich, K. T., & Eppinger, S. D. (2004). Product Design and Development (3rd ed.). New York, NY: McGraw-Hill/Irwin.

4