COMPLIANT

AEROSPACE AND DEFENSE MANUFACTURING CENTER

BECAUSE IT’S ALL ABOUT THE MISSION ®

CAPE CANAVERAL, FLORIDA USA

• ECONOMICALLY DISADVANTAGED WOMAN-OWNED SMALL BUSINESS

• SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESS

• MINORITY-OWNED

• Precision Machining

and Fabrication

• Avionics

• Test and Evaluation

• Specialty

Manufacturing

• Reverse Engineering

Quotes@CraigTechInc.com

CRAIG TECHNOLOGIES SUPPORTS YOUR PROJECTS

FROM CONCEPT TO REAL-WORLD APPLICATION

We design, prototype,

manufacture, and

perform final

acceptance testing for

a wide variety of

avionics & electro-

mechanical systems

and components.

We provide

technical

services,

analysis, and

business

support for

projects large and

small.

We repair, over-

haul, refurbish,

and complete

preventive

maintenance to

extend the life of

mission-critical

systems.

We engineer,

validate, and

integrate software

systems to match

the capability of

custom hardware

platforms.

Precision Machining and Fabrication

• CNC Turning and Milling

• CNC Sheet Metal Fabrication

• EDM Wire and Sinker Machining

• Waterjet Cutting

• Welding, Brazing, and Painting

Avionics

• Cable Fabrication

• Digital and Analog Electronics Fabrication

• Environmental Testing

• Satellite Signal Testing

Specialty Manufacturing

• CNC Tube Bending

• Laser Identification and Marking

• Composite Fabrication

• Hydraulic and Pneumatic Pressure Testing

• Mil-Spec Chemical Conversion Coating

• 3-D Printing

Test and Evaluation

• Non-destructive Evaluation (NDE)

• CMM, VCMM Quality Inspection

• Materials and Process Evaluation

• Class 100,000 Clean Room Assembly and

Testing

Craig Technologies delivers award-winning engineering and technical solutions to both

commercial and government clients nationwide. Founded in 1999 by CEO Carol Craig, we

achieve stability through diversity and offer a wide scope of capabilities. Our lean management

team and industry-leading employee benefits help us deliver exceptional customer-driven

solutions at a lower cost. Craig Technologies’ nationally-recognized Aerospace and Defense

Manufacturing Center (ADMC) offers a consolidated design-to-production capability at our

161,000 sq. ft. facility in Cape Canaveral, FL. The ADMC provides a quick and cost-effective

solution to any priority need by supporting multiple product lines under one roof.

COMMERCIAL CUSTOMERS ATK

BOEING

COMTECH SYSTEMS

CONOCO PHILIPS

GE AVIATION

HARRIS

INDUSTRIAL LIGHTING PRODUCTS

LOCKHEED MARTIN

VENCORE

SIEMENS ENERGY

SIERRA NEVADA CORPORATION

SPACE SYSTEMS/LORAL

SPACEX

TOSHIBA

“CRAIG TECHNOLOGIES

BRINGS SERIOUS EXPERTISE

TO THE TABLE AND

CONSTANTLY EXCEEDS

CONTRACT REQUIREMENTS/

SPECS AND WORKMANSHIP …

CONSISTENTLY STANDS UP

AND PROVIDES SUPERIOR

SERVICE AND CONSISTENTLY

SOLVES ALL PROBLEMS WITH

INNOVATIVE LOW COST

(SOMETIMES NO COST)

SOLUTIONS.”

– CUSTOMER FEEDBACK

COMPOSITES EQUIPMENT

Machine Type Mfr. Description Model # X Y Z

All Values in Inches

Oven Cole-Parmer Max Temp - 200⁰C/392⁰F 05015-50 12 10 10

Oven, Precision Quincy Max Temp - 650⁰F 22-650M 37.5 26.5 25.5

Oven, Vacuum Lunair <10ˉ4 TORR Allen Bradley PLC 1000 48 47 48

Oven, Vacuum Fisher Scientific Capacity: 1.5 cu. Ft., Temperature range: Ambient to 280⁰C (536⁰F) 282A 18 12 12

Oven, High Temperature Grieve Max Temp - 1250⁰F AB-1250 36 36 36

Oven, Walk-In Grieve 842 cu ft Modified 34H-1200 72 120 72

Terminal Pull Tester Instron Variable compression up to 45,000 lbs 4502

Terminal Pull Tester Instron Variable compression up to 45,000 lbs 4507-001

Autoclave Baron-Blakeslee MAWP 125 PSIG – 375⁰F BAC510 60 108 60

Paint Booth Devilbliss DF-L-1089-100 120 240 84

Cleaner, Ultrasonic Branson DHA 1000 14 16 10.5

Cleaner, Ultrasonic Delta Sonics, Inc. DT-5H 9 11 10

Electropolisher ESMA, Inc. Tank Volume: 2 gallons E-299 6 12 6

Vacuum Bell, Jar Torr Vac 1x10ˉ6 TORR H26

Chamber, Environmental Test Tenney Engineering Inc. -150⁰C to 200⁰C T16-SPL 48 48 48

Marking System, Laser Telesis Zenith 10F

Cleaning Station Custom

Thermal Sealer Vertrod 24A/CAB

Materials/Processes Milling Turning EDM Structural Bonding

Welding Corrosion Protection

Repair

CRES (Corrosion Resistant Steel)

X X X X X X N/A

Titanium X X X X X X N/A

Inconel X X X X X X N/A

Carbon Steel X X X X X X N/A

Aluminum X X X X X X N/A

Aluminum Honeycomb X N/A X X X X X

Composite Honeycomb X N/A N/A X N/A X X

CRES Honeycomb X N/A X X X X X

MANUFACTURING MATERIALS / PROCESSES

WELDING EQUIPMENT

AVIONICS EQUIPMENT

Equipment Nomenclature Applicable Features/Limits/Specifications

RF- Test Anechoic Chamber, Compact Range 2 Ghz to 50 Ghz

RF & Audio Shielded Room 17.5 ft x 15.5 ft x 8 ft

Vibration Tables – (2) LDS V860 Shakers (2)

UnHoltz-Dickie Controllers

Vibe rated @ 6,000 lbs force

Thermal Testing Chambers (Temp and Humidity) Cincinnati Sub-Zero (48x48x48); Sexton-Espec

(55x55.5x34.5); Thermotron (24x24x24) (-100⁰F to

392⁰F & 10% to 98% RH)

Cold Plate Chillers – Dry Cooler -15⁰C/5⁰F to 70⁰C/158⁰F

Mass Spectrometer Leak-Detection System Adixen ASM.192 T2D+

DITMCO 9503-12B Analyzer – 10,000 Test Points

System

Automated Tester: Continuity, DC Hi-pot, and

Isolation; Resistance testing

OSHA Approved Laboratory vented fume hoods (2) Ventilation velocity of 103 ft/min

Precision high temperature drying ovens 3.75 cu ft

Tenney Thermal-Vacuum Chamber 1.70 cu ft

Uninterruptible Power System (UPS) 20,000 Sq Ft easily reconfigurable

Machine Type Model X Y Z

All Values in Inches

Bender, Metal/Tube, Power Conrac 211 1LH 216 3

Bender, Metal/Tube, Manual Clark and Lewis CL75MU 126 2

Bender, Metal/Tube, CNC Eaton Leonard VB-100-HP 174 1

Flare/Finish, Tube End Phi 609V 2

Flare/Finish, Tube End Clark and Lewis CL2SD3 53 2

Measuring, Vector Eaton Leonard S5-XP-UPG

TUBE BENDING EQUIPMENT

Machine Type Model X Y Z

All Values in Inches

Mill, CNC, Vertical, 3-Axis Mazak VCN-410-A 22.05 30 20

Mill, CNC, Vertical, 3-Axis – Nexus Mazak VCN700D50-II 60.24 27.56 25.59

Mill, CNC, Vertical, 3-Axis Hurco BMC 3017 30 18 20

Mill, CNC, Vertical Mazak FJV-60/80 78.7 55.2 23

Mill, CNC, Vertical, 3-Axis, Graphite Hurco VM10HX 18 12 18

Mill, CNC, Horizontal, 3-Axis Mazak FH7800 41.34 31.5 34.65

Mill, CNC, 3-Axis – My Center Kitamura 4XiF 40 20 20

Mill, CNC, 5 Axis Hurco VMX42UI 12.5 12.5 12.5

Mill, CNC, 5 Axis – Nexus Mazak 510C-II 10 10 10

EDM, Wire 2-Axis Mitsubishi FA10MD 12 10 8

EDM, Wire 6-Axis Makino SP64 25.6 15.74 16.2

EDM, Wire 4-Axis Sodick AG600L 23.6 14.96 13.78

EDM, Drill Current MT30S

EDM, Plunge 3-Axis Sodick AG60L 24 24 18

Waterjet, 2-Axis – Tilt +/- 9.0 OMAX 80X 180 89

Turning Center, CNC Mazak QTN-100 13.2 17

Turning Center, CNC – Nexus Mazak QTN-300 8.85 49

Turning Center, CNC, 4-Axis – Nexus, C

360 degrees

Mazak QTN-350MY-

11

59 6 17.75

Lathe, CNC, 6-Axis, Multiturn Okuma LB3000EX +2.76/-1.97 39.76

Lathe, Manual Hardinge HLV-H 20 11

Lathe, Manual – Can Swing 24” through

13” Gap

Clausing Corp.

Mascot VS2000

72 18

Mill, Manual, Vertical, 3-Axis Bridgeport EZ TRAK 48 12 12

Mill, Manual, Vertical, 3-Axis Bridgeport Series II w/

PROTO-TRAK

35-56 18 12

Mill, Manual, Vertical, 3-Axis Wells-Index 847 33 16 6

Media Blast, Cabinet Uni-Home 503 24 24

Manual Grinding Harig 618 Auto Step 18 6 3

Saw, Band, Vertical Marvel 8-Mark II 96 24 28

Grinder, Cylindrical Victor JMC-600H

Hone, Horizontal Sunnen MBB-1660 24 18

Crane, Overhead – 5-Ton Kranco

MACHINE SHOP EQUIPMENT

INSPECTION EQUIPMENT

Machine Type Model X Y Z

All Values in Inches

CMM Zeiss Contura G2 623534-9803-200 27 39 23

CMM Brown & Sharpe Tesa MicroHite 3D Reflex 454 18 19 15

CMM Brown & Sharpe Global Activ 122210 86 46 36

VCMM Micro Vu Vertex 420 12 12 12

Machine Type Model X Y Z

All Values in Inches

Brake, Press, Foot Baileigh SF-5216

Brake, Press, Hydraulic – Tonnage 17 Pacific 17-4 48

CNC Brake Press Haco SRM 120-10-8 120

Brake, Pan & Box, Manual – Bend Length

– 3” to the full Length of the Machine

Chicago BPU612-6 117 53 16

Brake, Pan & Box, Manual Baileigh V 612-6

Drill Press, Vertical IBARMIA AV 32 4.5 32

Press, Arbor Dake 4M2

Press, Arbor Greenerd 789-000619

Punch, Turret DI-ACRO 0.18 1.375 0.25

Punch, Square DI-ACRO 2HP

Riveter, Power US Industrial Tool 1.50-36 36

Roller Newline 53-04-500 24

Roller Morgan Rushworth PBR1250 50 0.236

Roller, Electric Baileigh SF 50-16

Saw, Band, Vertical Delta/Rockwell 28-350 19 12

Saw, Band, Horizontal Dake SE 912 55.2

Shear, Hand DI-ACRO 24HS

Shear, Corner, Manual DI-ACRO 2P 6

Shear, Corner, Manual TennSMITH SN 6

Shear, Power National Sheetmetal NH5210 48 0.134

Shear, Power Betenbender 48-120

SHEET METAL EQUIPMENT

FOR MORE INFORMATION, PLEASE CONTACT:

QUOTES@CRAIGTECHINC.COM

8550 ASTRONAUT BLVD. | CAPE CANAVERAL, FL 32920

321.613.5620 | CTADMC.COM

TWITTER @CTADMC

NON-DESTRUCTIVE EVALUATION EQUIPMENT

Machine Type Model Description

Fluorescent Inspection Line Ardrox UWW-100 Water Washable, Level 3

Magnetic Particle Probe Parker Research DA-200

Ultrasound Flaw Detector Krautkramer USN 60

Eddy Current Flaw Detector Zetec MIZ 21A

Iplex Olympus VideoScope Olympus IV7435A 4mm diameter

Computed Radiography Scanner GE CR 50XP 12 in x 14 in

Flash Computed Tomography Hytec FCT-2251 7 in x 9 in

Pantak 225KV X-Ray Tube Pantak HF 225 6 ft x 8 ft

Seifert 100KV X-Ray Tube Seifert ES 2 6 ft x 8 ft

Machine Type Model Description

Weldhead, Orbital Astroarc Polysoude HD-750

Weldhead, Orbital Astroarc SK-1500/2500-2T Tubing Size 1 – 2.5

Weldhead, Orbital Astroarc SK-375-2T Range of Tubing 0.25 – 0.375

Weldhead, Orbital Astroarc SK-500-2T Tubing size 0.5 – 0.675

Welder/Cutter, Oxy Acetylene Victor Journeyman 315C

Welder, Multiprocess Miller 350CC/CV GMAW, TIG, Stick

Welder, GMAW Miller Millermatic 250X

Welder, GTAW Lincoln Precision TIG 375

Welder, GTAW Miller Syncrowave 351

Welder, Spot Resistance Miller SSW 2020 ATT

Weld, Table Delta/Rockwell Keyhole Slotted Table – 144” x 72” x 2”

Cutter, Plasma Dayton 5Z031B

Cutter, Plasma Miller Spectrum 2050