DAESUNG CATALOGUEdaihaidang.com/wp-content/uploads/2018/09/DAESUNG...HOME ) > KS B DS-107 a-em Welds...

18
DAESUNG CATALOGUE 1. REGULATOR

Transcript of DAESUNG CATALOGUEdaihaidang.com/wp-content/uploads/2018/09/DAESUNG...HOME ) > KS B DS-107 a-em Welds...

  • DAESUNG CATALOGUE

    1. REGULATOR

  • 2. WELDING TORCH

  • 3. CUTTING TORCH

  • 4. HEATING TORCH

  • 5. WELDING CUTTING TIPS

  • 6. FLASHBACK ARRESTOR

  • 7. CUTTING MACHINE


Electro Slag Welds

Electro Slag Welds

Dinen12062 Ndt Welds 1997

Dinen12062 Ndt Welds 1997

Ultrasonics of Welds

Ultrasonics of Welds

ULTRASONIC PROPAGATION IN AUSTENITIC STAINLESS STEEL WELDS ...€¦ · , Transducer 4h-m 32 mm / X /f, - Ultrasonic testing in pulse-echo mode Y - Contact transducer, diam. 13 mm

ULTRASONIC PROPAGATION IN AUSTENITIC STAINLESS STEEL WELDS ...€¦ · , Transducer 4h-m 32 mm / X /f, - Ultrasonic testing in pulse-echo mode Y - Contact transducer, diam. 13 mm

friction stir welds

friction stir welds

Automated Ultrasonic Testing of Pipeline Girth Welds - … for Pipeline Girth Welds... · Automated Ultrasonic Testing of Pipeline Girth Welds Automated Ultrasonic Testing of Pipeline

Automated Ultrasonic Testing of Pipeline Girth Welds - … for Pipeline Girth Welds... · Automated Ultrasonic Testing of Pipeline Girth Welds Automated Ultrasonic Testing of Pipeline

Fatigue Tests of Axially Loaded Butt Welds up to Very High ...axially loaded butt welds (S355J2+N, t = 4 mm) are conducted in three test series up to very high cycles. As a As a reference,

Fatigue Tests of Axially Loaded Butt Welds up to Very High ...axially loaded butt welds (S355J2+N, t = 4 mm) are conducted in three test series up to very high cycles. As a As a reference,

Thermit Welds certificate.pdf

Thermit Welds certificate.pdf

2018 DBSS Section 421 Structural Steelwork · Web viewHave each operator make a weld specimen not less than 1200 mm in length for fillet welds and 150 mm in length for butt welds.

2018 DBSS Section 421 Structural Steelwork · Web viewHave each operator make a weld specimen not less than 1200 mm in length for fillet welds and 150 mm in length for butt welds.

Testing Welds

Testing Welds

Khulmann Longitudinal Welds

Khulmann Longitudinal Welds

Defects Detection in Welds Using Ultrasonic Analysis · Defects Detection in Welds Using Ultrasonic Analysis Sonia DJILI, Faiza BOUKAZOUHA, Rafik HALIMI, ... Presentation of Welds

Defects Detection in Welds Using Ultrasonic Analysis · Defects Detection in Welds Using Ultrasonic Analysis Sonia DJILI, Faiza BOUKAZOUHA, Rafik HALIMI, ... Presentation of Welds

Daesung Bobbin Catalogue

Daesung Bobbin Catalogue

Welds Edited

Welds Edited

Testing and Inspecting Welds - Home - SCCPSSinternet.savannah.chatham.k12.ga.us/schools/wts/staff/Kennedy...ultrasonic inspection ... Welds . Testing and Inspecting Welds . Testing

Testing and Inspecting Welds - Home - SCCPSSinternet.savannah.chatham.k12.ga.us/schools/wts/staff/Kennedy...ultrasonic inspection ... Welds . Testing and Inspecting Welds . Testing

Edge Welds Validation

Edge Welds Validation

Welds Errors

Welds Errors

Visual Inspection of Welds

Visual Inspection of Welds

Info - Butter Welds

Info - Butter Welds

41 Bending of Welds

41 Bending of Welds