Cold-Plus™ Refrigerant Enhancer .

Cold-Plus™Refrigerant Enhancer

www.TrifectaDistributors.com

Consistent BENEFITS for our customers

SAVINGS of 15% - 25% on Air Conditioning & Refrigeration

Energy Costs

EXTENDING Air Conditioning Compressor Life


Cold-Plus™ is added to the Air Conditioner/Refrigeration system…

• INSTALLS the same manner as adding Freon

• INCREASES the heat transfer of system• REMOVES more moisture from the air• Providing you with COLDER Supply Air• Cooling the conditioned space FASTER• Using LESS Electricity• REDUCES friction in moving parts


How does Cold-Plus™ work?

• ELIMINATES and PREVENTS “Oil Fouling” from within the system

• IMPROVES the refrigerant Evaporation cycle• CLEANS and COATS the friction bearing parts

of the compressor, enabling more EFFICIENT operation and EXTENDING Service Life

• LOWERS the amperage draw• LOWERS the decibel/noise level


THE PROBLEM:“OIL FOULING”

• Refrigeration systems with mechanical compressors circulate 1% of their compressor lubricating oil with the refrigerant as it circulates throughout the system

• 1% of 1 quart (128 oz) is 1.28% of oil (in the form of sticky/lacquer-like substance) which fills the pores of the copper tubing carrying the refrigerant throughout the evaporator and condenser units, continually during the refrigeration cycle → THIS IS OIL FOULING

• This condition is significant, as the oil enters the tubes at superheated temperatures, and reduces the efficiency of the system.


“OIL FOULING”…..

•Due to the insulating properties of oil, the oil insulates the heat transfer from the cooling refrigerant to metal (copper) tubing walls•Oil fouling degrades system performance by

up to 30%* and higher.•All compressor oils available today cause Oil

Fouling, impeding heat exchange

• *ASHRAE (American Society of Heating, Refrigeration, and Air Conditioning Experts)


“OIL FOULING” SOLUTION….• Cold-Plus™ technology removes and eliminates the Oil Fouling on

refrigeration tubing inner surfaces; acting as a catalyst without chemically changing itself, the refrigerant, or the lubricating oil.

• Allowing the Cold-Plus™ solution to adhere to the metal tubing walls

• The refrigerant flow increases when the insulating oil barrier is removed


What happens when Oil Fouling is removed?

The refrigerant flow rate INCREASES 10%-15% RESULTING BENEFITS:

– Supply Air Vent temperature drops of 2 to 4+ degrees– Reduces the refrigeration cycle (running less)– Improves the refrigerant evaporation cycle (lower

temperature)– Extracting more moisture from the air– Increases system capacity– Providing more cooling (larger space)


ELIMINATION of “Oil Fouling” RESULTS IN:

• 10% to 20% Less Electricity Consumed – Equipment Operates Less, Due to Better Cooling

• More COOLING → FASTER cooling!

• The Compressor Operates LESS• The Compressor operates at a lower

temperature → Extending Life Cycle


What is the Cost, Payback, and ROI ?

• The COST of installation is dependent upon Compressor Size and Number of Compressors in the system

•PAYBACK is usually under one (1) year


What are Typical BENEFITS ?

• Typical SAVINGS of 10% - 25% on the Air Conditioning / Refrigeration portion of utility bill.

• REDUCTION in Maintenance Costs• EXTENDING life cycle of equipment• Bishop Dairy in Okeechobee, Florida experienced

23.5% Energy Reduction in milk chillers• El Presidente Supermarket in Lake Worth, Florida

experienced an average 18% reduction in overall electric bill (A/C units as well as refrigeration units)


What are the RISKS ?

• The amount of savings is dependent upon the age of the compressor

• The amount of savings is dependent upon the level of maintenance performed to the system

• Cold-Plus™ will save you at least 10% on your Air Conditioning operation expense


Cold-Plus™

What it is…..• A one-time only injection• Lasts the lifetime of the system• Lowers amperage draw• Increases refrigerant flow• Increases heat transfer• Coats the metal/copper tubing with

unique, inert substance, which…• Lowers the evaporating point• Eliminates “Oil Fouling” forever• Lowers the decibel/noise level• Unique, synthetic oil compatible

with all old and new compressor oils and refrigerants

What it is NOT…..• Not just a lubricant• Does not damage the

ozone layer• Does not contain any

chlorinated compounds, nor does it break down into an chlorine acids

• Is not toxic• Does not have EPA

disposal issues


Cold-Plus™ Installation

•Performed by locally licensed HVAC technician•Prior to installation, system should be inspected for proper

operation & repaired as necessary (particularly no slow or undetected leaks)•Thermostat needs to be operational when injection is

administered•Decibel level and amperage draw are reduced within minutes•Cold-Plus™ improvements continue for two weeks after

installation, unless system has extensive “Oil-Fouling” requiring more time


Cold-Plus™ Refrigerant Enhancer .

Documents

Transcript of Cold-Plus™ Refrigerant Enhancer .