Cargador de Anfo
-
Upload
juan-diego-laura-flores -
Category
Documents
-
view
279 -
download
6
description
Transcript of Cargador de Anfo
CHARGETEC
Heavy-duty charging vehicle for mining and tunneling operations
2
Telescopic boom with a service platform made of stainless steel
Articulated frame steering. 4-wheel drive
TAKE CHARGE THE CHARGETEC IS ONE OF THE MOST TECHNICALLY ADVANCED CHARGING TRUCKS OF ITS KIND, WITH MORE THAN A DECADE OF TESTING AND DEVELOPMENT BEHIND IT. WITH MULTIPLE BOOM AND CHARGING VESSEL OPTIONS AVAILABLE, IT GETS THE JOB DONE.
Productivity. Three different pressure points allow for an accurate charging density and a precise blast result.
Flexibility. Three boom and basket systems and a remote charging boom to cover all your needs.
Safety. Rear camera with monitor, strobe lights and reverse alarm standard on all vehicles to ensure visibility.
MAIN BENEFITS
3
Convenient and accessible service points
All vital parts of the ANOL CC made of stainless steel
TAKE CHARGE
Camera and monitor in cabin
4
+ PRODUCTIVITYTo keep productivity high, the Chargetec has been equipped with the
latest generation of charging vessels; the ANOL CC. Three pressure points ensure optimized density for efficient and high-speed charging
in all directions. All vital parts of the ANOL CC are made of stainless steel for extended machine life.
+ FLEXIBILITYThe ANOL CC charging vessel is available in volumes of 500, 750 or
1,000 liters, which makes the Chargetec suitable for a wide range of operations. Thanks to four different boom options, the Chargetec can
operate in most types of drifts and handle charging in up to 115 mm hole diameter.
+ SAFETY The Chargetec has been designed to meet the latest safety standards and requirements. Rear camera and cabin monitor allow for full operator overview. A FOPS approved cabin protects the operator and passengers. Additional safety standards on the Chargetec include:
two point safety belts, two portable fire extinguishers, ANSUL fire suppression system and emergency stop button.
CHARGETEC FROM ATLAS COPCOTHE CHARGETEC IS A HEAVY-DUTY CHARGING VEHICLE FOR MINING AND TUNNELING OPERATIONS, BUILT TO MEET THE HIGHEST DEMANDS FOR FUTURE BLASTING TECHNOLOGY.
ATLAS COPCO SERVICEAtlas Copco optimizes delivery of quality spare parts, as well as superior service to all customers in the mining and rock excavation industry. We act as the most competent speaking partner in matters regarding operations of your equipment.
This enhances your productivity, profitability, and peace of mind, ensuring successful sustainable business relationships.
5
STANDARD FEATURES
ANOL CC charging vessels in volumes of 300, 500, 750 or 1000 liters
Charging capacity of up to 130 kg/minute with high density
Crystalined, prilled or of this mixed ANFO can be charged in all directions and different hole sizes
Air supply for charging to be by onboard compressor or by external air supply.
UV heavy duty carrier
Articulated frame steering, 4-wheele driveArticulated frame steer
Low emission, turbo-charged, water cooled 4 cylinder engine
Jacks for stability set-up Jacks for stable set-up
Instruments: fuel gauge, emergency stop, warning lights
Engine display Articulated frame steer
Camera and monitor
Brake lights
Service brakes with inboard wet disc
Emergency/parking brakes: SAHR (Spring Applied Hydraulic Released)
High speed
Easy to service and maintenance
Hill climbing ratio: 1:4
Articulated steering
Accurate, rapid and simple positioning of the service boom and basket
FOPS II-Approved canopy
Operators seat for trammingArticulated frame steer
Driver’s seat is supplied with adjustable armrests and a two point safety belt
Fire Extinguisher 1 portable 2 kgJacks for stable set-up
Dana/Clark, full powershift transmission with torque converter and gear box with 3 stages forward and reverse gear box through hydraulic wet disc clutches
RSP10, RSP 20, RSP 25
Boom can be operated from both seat and basket
Start/stop from basket
Detonator box in basket
CHARGING SYSTEM
CARRIER OPERATING SYSTEM
BRAKE SYSTEM
GENERAL
CANOPY
TRANSMISSION
BOOM AND BASKET SYSTEM
6
TECHNICAL SPECIFICATIONS
Engine Engine Deutz TCD 2013 L42V
Torque at 1,500 rpm 600 Nm
Hydraulic jacks, boom end 2Jacks for stable set-up
Joy stick controlled boom PVG32 valves
Fire extinguisher 1 x 2 kg
Hydrostatic power steering system
Stairs for platform
Manual central lubrication nipple
Spirit levels, one for longitudinal and one for sideway
Ground clearance 322 mm
Height from ground to first step in canopyAd f~ 400 mm
Drive 4 x 4
Hill climbing ability 1:4 / 14° / 25%Ja
Rims 8.00 x 20
Tyres 12.00 x 20
Steering angle +/- 40°
Oscillation +/- 12°
Service brakes 2 separate circuits
Emergency and parking brakes SAHR
Manufacturer Deutz
TypeAd TCD 2013 L42V
Stage IIIA
Design 4 cylinder in line water cooled and silencerJa
Torque at 1,400 rpm
Max Power 120 kW (161 hp) @ 2300 rpm
Piston displacement 4.76 liters
Compression ratio 17.6:1
Aspiration Turbocharger
Generator capacity Standard 28V, 80Amp
Air filter Standard air filter
Cyclonic Air filter. Option
Fuel consumption @ 100% efficiency 209 g/kWh = 0.17 L/kWh
Recommended fuel (Warranty cover) ASTM D 975:1D-2D 2
Gear 1 6.1 km/h
Gear 2 Ad 12.7 km/h
Gear 3 26.8 km/h
Electrical GAR37, 4,3 m3/min @ 7 bar Electric Motor, 30 kW
Diesel hydraulic GAR37, 4,3 m3/min @ 7 bar Hydraulic Motor 30 cm3 – 130 l/min @180 bar
Hydrodynamic transmission DANA Clark 24000
Axles DANA Spicer 112/138
Fuel tank 170 liters
Hydraulic tank Approx. 228 l
Engine with oil filter 15.5 liters
Transmission 30 liters
Axles including planetary gear 20 dm3
CARRIER
FUNCTIONAL DATA
ENGINE
SPEED, FORWARD AND REVERSE
COMPRESSOR
TRANSMISSION
VOLUME DATA
Voltage 24 V
Battery capacityArtic 2 x 12 V, 70 Ah
Headlight front 4 x 70 W, Halogen
Headlight rear 4 x 70 W, Halogen Jacks for stable set-up
Working light 4 x 70 W, Halogen
Loud-tone horn 335 Hz, 116 dBA, 1 x 60 W
Cable Flame retardant
ELECTRIC SYSTEM
Main motor 11 kW
VoltageArtic 400 – 1000 V
Frequency 50 – 60 Hz
Cable See below tableJacks for stable set-up
ELECTRIC POWER PACK SYSTEM
Cable
Voltage Type Dimension, mm2 Diameter, mm
400-690 V Buflex 3x35+3G6 24.0/26.5
1000 V Buflex 3x35+3G6 20.5/23.0
Engine Cummins
Head lights 40W Led Articulated frame steer
Working lights 40W Led
Diesel hydraulic (these options exclude El. Hydraulic)Jacks for stable set-up
Cabin FOPS II-Approved cabin including: Air conditioner, Rubber damped for comfort during tramming
CARRIER
Optional equipment
2819
2590(With
canopy)
2749 3700 1371
4149 3671
32212° 13°
2660(With cabin)
Side view
7
For blast holes with diameters 25 to 150 mm
Charging in all directions. In up-holes, up to 100 mm diameter, with the jet function activated
Charging density between 0,9 and 1,1 kg/cc
Charging capacity up to 130 kg per minute
Remote controlled operation
Compact design
All vital parts of the Anol CC are made of stainless steel
The ANOL CC unit is manufactured according to regulations for pressure vessels
Approved for use by the Swedish National Board of Occupational Safety and Health
Charging capacity <130 kg/min
Air consumption 2,5 – 4,5 m3/min
Maximum air pressure 8 bar
Maximum charging hose length 50-60 m
Minimum charging hose resistance 1 kOhm/m
Maximum charging hose resistance 30 kOhm/m
TECHNICAL FEATURES
ANOL CC300 ANOL CC500 ANOL CC750 ANOL CC1000
Volume 300 liters 500 liters 750 liters 1000 liters
ANFO Capacity 240 kg 400 kg 600 kg 800 kg
Weights 200 kg 215 kg 230 kg 315 kg Ja
Diameter 900 mm 900 mm 900 mm 1000 mm
Heights 1110 mm 1430 mm 1730 mm 1730 mm
VESSEL
ANOL CC
ANOL CC/DA – Double material discharge for simultaneous charging of two blastholes
ANOL CC/Radio – Radio remote controlled operationJacks for stable set-up
Bottom Anfo outlet
ANOL CC/Anol up – Ejector feeding device for ANOL CC
Water adding system, to make blasting agents more sticky
Hose pusher, for charging up holes
Charging hose meter & speed counter
Charging hose centralizer
Optional equipment
Number of vessels 1 vessel incl. on board compressor
Lifting in basket 400 kg
Lifting height 9000 mm
Rotation +/- 45°Jacks for stable set-up
Basket size (WxL) 1439 x 1680 mm
Jacks at boom end Fixed
Options
FOPS roof on service boom basket
Stainless service boom basket
Number of vessels 1 vessel incl. on board compressor
Lifting in basket 900 kg
Lifting height 6800 mm
Rotation +/- 45°Jacks for stable set-up
Basket floor (WxL) 2194 x 2405 mm
Jacks at boom end Fixed
Options
FOPS roof on service boom basket
Stainless service boom basket
RSP20
RSP25
BOOM OPTIONS
Number of vessels 1 or 2 incl. on board compressor
Lifting in basket 300 kg
Lifting height 7000 mm
Rotation +/- 45°Jacks for stable set-up
Basket size (WxL) 1437 x 1414 mm
Jacks at boom end Fixed
Options
FOPS roof on service boom basket
Stainless service boom basket
RSP10
R3700
R67002365
±40°
Turning radius Front wiew
COMMITTED TO SUSTAINABLE PRODUCTIVITY
www.atlascopco.com
98
51 34
84 01 2015
-06 Ö
rebro, Sw
eden. Legal Notice ©
Copyright 2015, A
tlas Copco R
ock Drills A
B, Ö
rebro, Sw
eden. All product nam
es in this publication are trademarks of A
tlas Copco. A
ny unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos m
ay show equipm
ent with optional extras. N
o warranty is m
ade regarding specifications or otherwise. S
pecifications and equipment are
subject to change without notice. C
onsult your Atlas C
opco Custom
er Center for specific inform
ation.
We stand by our responsibilties towards our customers, towards the environment and the people around us. We make performance stand the test of time.This is what we call – Sustainable Productivity.