A2 Stainless Steel : ISO 2338, 1998 : 0.8 - 5mm Dia. · Hardened Steel Pin Dia. less 5 µm Pin Dia....
Transcript of A2 Stainless Steel : ISO 2338, 1998 : 0.8 - 5mm Dia. · Hardened Steel Pin Dia. less 5 µm Pin Dia....
M E C H A N I C A L
Product information updated May 2017 and subject to change. Please click the product links for prices and availability.
Dowel PinsA2 Stainless Steel : ISO 2338, 1998 : 0.8 - 5mm Dia.
DP
DP0.8-5DP0.8-8DP0.8-10DP0.8-12DP1.0-4DP1.0-5DP1.0-6DP1.0-8DP1.0-10DP1.0-12DP1.5-4DP1.5-5DP1.5-6DP1.5-8DP1.5-10DP1.5-12DP1.5-14DP1.5-16DP2.0-4DP2.0-5DP2.0-6DP2.0-8DP2.0-10DP2.0-12DP2.0-14DP2.0-16DP2.0-18DP2.0-20DP2.0-24DP2.5-4DP2.5-5DP2.5-6DP2.5-8DP2.5-10DP2.5-12DP2.5-14DP2.5-16DP2.5-18DP2.5-20DP2.5-24
0.80.80.80.81.01.01.01.01.01.01.51.51.51.51.51.51.51.52.02.02.02.02.02.02.02.02.02.02.02.52.52.52.52.52.52.52.52.52.52.5
58
1012
4568
1012
4568
10121416
4568
10121416182024
4568
10121416182024
0.40.40.40.40.70.70.70.70.70.71.71.71.71.71.71.71.71.72.92.92.92.92.92.92.92.92.92.92.94.44.44.44.44.44.44.44.44.44.44.4
PartNumber ØD m6
LengthL
Double Shear Strength*
(kN)DP3.0-4DP3.0-5DP3.0-6DP3.0-8DP3.0-10DP3.0-12DP3.0-14DP3.0-16DP3.0-18DP3.0-20DP3.0-24DP3.0-28DP3.0-30DP4.0-5DP4.0-6DP4.0-8DP4.0-10DP4.0-12DP4.0-14DP4.0-16DP4.0-18DP4.0-20DP4.0-24DP4.0-28DP4.0-30DP4.0-32DP4.0-36DP4.0-40DP4.0-45DP4.0-50DP5.0-6DP5.0-8DP5.0-10DP5.0-12DP5.0-14DP5.0-16DP5.0-18DP5.0-20DP5.0-24DP5.0-28DP5.0-30
33333333333334444444444444444455555555555
4568
101214161820242830
568
1012141618202428303236404550
68
101214161820242830
6.66.66.66.66.66.66.66.66.66.66.66.66.6
11.711.711.711.711.711.711.711.711.711.711.711.711.711.711.711.711.718.118.118.118.118.118.118.118.118.118.118.1
PartNumber ØD m6
LengthL
Double Shear Strength*
(kN)
MaterialA2 Stainless Steel. Also available in A4 Stainless Steel; through hardened Steel 100 Cr6 (1.3505) to HV550-650; unhardened Mild Steel (9SMnPb28, WS 1.0718), P.O.A.Standard Tolerance: Dowels are ground to m6 tolerance as standard.* Double Shear Strengths: Tested to ISO 8749.Also available in h7 and h8 tolerance, P.O.A.16, 20, 25 and 30mm diameter dowel pins available as standard in lengths up to 120mm. Other lengths available, P.O.A.
Chamfered Ends
1.6µ
L
ØDm6
3-10±0.2512-50±0.5055+ ±0.75
Chamfer 15°
https://amironic.co.il/
https://amironic.co.il/
M E C H A N I C A L
Product information updated May 2017 and subject to change. Please click the product links for prices and availability.
Dowel PinsA2 Stainless Steel : ISO 2338, 1998 : 5 - 12mm Dia.
DP
DP5.0-32DP5.0-36DP5.0-40DP5.0-45DP5.0-50DP5.0-55DP5.0-60DP6.0-6DP6.0-8DP6.0-10DP6.0-12DP6.0-14DP6.0-16DP6.0-18DP6.0-20DP6.0-24DP6.0-28DP6.0-30DP6.0-32DP6.0-36DP6.0-40DP6.0-45DP6.0-50DP6.0-55DP6.0-60DP8.0-8DP8.0-10DP8.0-12DP8.0-14DP8.0-16DP8.0-18DP8.0-20DP8.0-24DP8.0-28DP8.0-30DP8.0-32DP8.0-36DP8.0-40DP8.0-45DP8.0-50DP8.0-55
55555556666666666666666668888888888888888
32364045505560
68
10121416182024283032364045505560
8101214161820242830323640455055
18.118.118.118.118.118.118.126.026.026.026.026.026.026.026.026.026.026.026.026.026.026.026.026.026.047.047.047.047.047.047.047.047.047.047.047.047.047.047.047.047.0
PartNumber ØD m6
LengthL
Double Shear Strength*
(kN)DP8.0-60DP8.0-70DP8.0-80DP10.0-10DP10.0-12DP10.0-14DP10.0-16DP10.0-18DP10.0-20DP10.0-24DP10.0-28DP10.0-30DP10.0-32DP10.0-36DP10.0-40DP10.0-45DP10.0-50DP10.0-55DP10.0-60DP10.0-70DP10.0-80DP10.0-90DP10.0-100DP12.0-14DP12.0-16DP12.0-18DP12.0-20DP12.0-24DP12.0-28DP12.0-30DP12.0-32DP12.0-36DP12.0-40DP12.0-45DP12.0-50DP12.0-55DP12.0-60DP12.0-70DP12.0-80DP12.0-90DP12.0-100
8 8 81010101010101010101010101010101010101010121212121212121212121212121212121212
60708010121416182024283032364045505560708090
1001416182024283032364045505560708090
100
47.047.047.064.164.164.164.164.164.164.164.164.164.164.164.164.164.164.164.164.164.164.164.192.092.092.092.092.092.092.092.092.092.092.092.092.092.092.092.092.092.0
PartNumber ØD m6
LengthL
Double Shear Strength*
(kN)
Other Info.General guidance on hole tolerances but there are graduations within each category: Hole Interference Transition Clearance Material Fit Fit Fit Hardened Steel Pin Dia. less 5 µm Pin Dia. less 2 µm Pin Dia. plus 25-60 µm Mild Steel Pin Dia. less 25 µm Pin Dia. less 5 µm Pin Dia. plus 25-60 µm Aluminium/Zinc/Brass Pin Dia. less 35 µm Pin Dia. less 5 µm Pin Dia. plus 25-60 µm
When a dowel is interference-fitted into a blind hole it increases the pressure of the air trapped into the hole. It is strongly advised to specify that the dowel should have an air release flat ground along its full length to prevent the dowel being ejected under the pressure of compressed air, or bursting the component into which it is driven.
Chamfered Ends
1.6µ
L
ØDm6
3-10±0.2512-50±0.5055+ ±0.75
Chamfer 15°
https://amironic.co.il/
https://amironic.co.il/
M E C H A N I C A L
Product information updated May 2017 and subject to change. Please click the product links for prices and availability.
Dowel PinsA4 Stainless Steel : DIN 7, 1.5 : 8mm Dia.
DP-A4
DP1.5-6/A4DP1.5-8/A4DP1.5-10/A4DP1.5-12/A4DP1.5-16/A4DP2.0-6/A4DP2.0-8/A4DP2.0-10/A4DP2.0-12/A4DP2.0-16/A4DP3.0-8/A4DP3.0-10/A4DP3.0-12/A4DP3.0-16/A4DP3.0-20/A4DP3.0-24/A4DP4.0-10/A4DP4.0-12/A4DP4.0-16/A4DP4.0-20/A4DP4.0-24/A4DP4.0-30/A4
1.51.51.51.51.52.02.02.02.02.03.03.03.03.03.03.04.04.04.04.04.04.0
68
101216
68
101216
81012162024101216202430
0.230.230.230.230.230.300.300.300.300.300.450.450.450.450.450.450.600.600.600.600.600.60
PartNumber ØD m6
LengthL C
DP5.0-10/A4DP5.0-12/A4DP5.0-16/A4DP5.0-20/A4DP5.0-24/A4DP5.0-30/A4DP5.0-40/A4DP6.0-12/A4DP6.0-16/A4DP6.0-20/A4DP6.0-24/A4DP6.0-30/A4DP6.0-40/A4DP6.0-50/A4DP8.0-12/A4DP8.0-16/A4DP8.0-20/A4DP8.0-24/A4DP8.0-30/A4DP8.0-40/A4DP8.0-50/A4
555555566666668888888
101216202430401216202430405012162024304050
0.750.750.750.750.750.750.750.900.900.900.900.900.900.901.201.201.201.201.201.201.20
PartNumber ØD m6
LengthL C
MaterialA4 Stainless Steel. Also available in A2 Stainless Steel and Mild Steel (m6 or h8 tolerances), P.O.A.Standard Tolerance: Dowels are ground to m6 tolerance as standard.* Double Shear Strengths: Tested to ISO 8749.Many more diameters (0.8 to 30mm dias.) and lengths up to 120mm - including non-metric equivalent sies - available, P.O.A. Selection kits available, P.O.A.
Other Info.General guidance on hole tolerances but there are graduations within each category: Hole Interference Transition Clearance Material Fit Fit Fit Hardened Steel Pin Dia. less 5 µm Pin Dia. less 2 µm Pin Dia. plus 25-60 µm Mild Steel Pin Dia. less 25 µm Pin Dia. less 5 µm Pin Dia. plus 25-60 µm Aluminium/Zinc/Brass Pin Dia. less 35 µm Pin Dia. less 5 µm Pin Dia. plus 25-60 µm
When a dowel is interference-fitted into a blind hole it increases the pressure of the air trapped into the hole. It is strongly advised to specify that the dowel should have an air release flat ground along its full length to prevent the dowel being ejected under the pressure of compressed air, or bursting the component into which it is driven.
Rounded Ends
L
ØDm6
3-10±0.2512-50±0.5055+ ±0.75
C
https://amironic.co.il/
https://amironic.co.il/
M E C H A N I C A L
Product information updated May 2017 and subject to change. Please click the product links for prices and availability.
Dowel PinsHard Ground Steel : DIN 6325 : 1 - 5mm Dia.
DH
DH1-4DH1-5DH1-6DH1-8DH1-10DH1-12DH1.5-5DH1.5-6DH1.5-8DH1.5-10DH1.5-12DH1.5-14DH1.5-16DH1.5-18DH1.5-20DH1.5-22DH1.5-24DH1.5-26DH1.5-28DH1.5-30DH2-6DH2-8DH2-10DH2-12DH2-14DH2-16DH2-18DH2-20DH2-22DH2-24DH2-26DH2-28DH2-30DH2-32DH2-36DH2-40DH2.5-6DH2.5-8DH2.5-10DH2.5-12DH2.5-14DH2.5-16DH2.5-18DH2.5-20DH2.5-22DH2.5-24DH2.5-26DH2.5-28DH2.5-30DH2.5-32DH2.5-36DH2.5-40DH2.5-45DH2.5-50
1.01.01.01.01.01.01.51.51.51.51.51.51.51.51.51.51.51.51.51.51.52.02.02.02.02.02.02.02.02.02.02.02.02.02.02.02.02.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.5
4568
1012
568
1012141618202224262830
68
1012141618202224262830323640
68
10121416182022242628303236404550
1.51.51.51.51.51.53.43.43.43.43.43.43.43.43.43.43.43.43.43.45.55.55.55.55.55.55.55.55.55.55.55.55.55.55.55.58.08.08.08.08.08.08.08.08.08.08.08.08.08.08.08.08.08.0
PartNumber ØD m6
LengthL js14
Double Shear Strength*
(kN)DH3-6DH3-8DH3-10DH3-12DH3-14DH3-16DH3-18DH3-20DH3-22DH3-24DH3-26DH3-28DH3-30DH3-32DH3-36DH3-40DH3-45DH3-50DH3-55DH3-60DH4-6DH4-8DH4-10DH4-12DH4-14DH4-16DH4-18DH4-20DH4-22DH4-24DH4-26DH4-28DH4-30DH4-32DH4-36DH4-40DH4-45DH4-50DH4-55DH4-60DH5-6DH5-8DH5-10DH5-12DH5-14DH5-16DH5-18DH5-20DH5-22DH5-24DH5-25DH5-26DH5-28DH5-30
333333333333333333334444444444444444444455555555555555
68
101214161820222426283032364045505560
68
101214161820222426283032364045505560
68
101214161820222425262830
131313131313131313131313131313131313131322222222222222222222222222222222222222223131313131313131313131313131
PartNumber ØD m6
LengthL js14
Double Shear Strength*
(kN)
Chamfered End Rounded End
0.8µ
L js14
ØDm6
Chamfer 15°
https://amironic.co.il/
https://amironic.co.il/
M E C H A N I C A L
Product information updated May 2017 and subject to change. Please click the product links for prices and availability.
Dowel PinsHard Ground Steel : DIN 6325 : 5 - 20mm Dia.
DH
DH5-32DH5-36DH5-40DH5-45DH5-50DH5-55DH5-60DH5-70DH6-10DH6-12DH6-14DH6-16DH6-18DH6-20DH6-22DH6-24DH6-26DH6-28DH6-30DH6-32DH6-36DH6-40DH6-45DH6-50DH6-55DH6-60DH6-70DH6-80DH6-90DH6-100DH8-14DH8-16DH8-18DH8-20DH8-22DH8-24DH8-26DH8-28DH8-30DH8-32DH8-36DH8-40DH8-45DH8-50DH8-55DH8-60DH8-80DH8-90DH8-100DH8-110DH8-120DH10-20DH10-22DH10-24DH10-26DH10-28DH10-30DH10-32DH10-36DH10-40DH10-45DH10-50DH10-55DH10-60DH10-70DH10-80DH10-90
555555556666666666666666666666888888888888888888888
10101010101010101010101010101010
3236404550556070101214161820222426283032364045505560708090
100141618202224262830323640455055608090
100110120
20222426283032364045505560708090
313131313131313153535353535353535353535353535353535353535353888888888888888888888888888888888888888888
132132132132132132132132132132132132132132132132
PartNumber ØD m6
LengthL js14
Double Shear Strength*
(kN)DH10-100DH10-110DH10-120DH12-20DH12-22DH12-24DH12-26DH12-28DH12-30DH12-32DH12-36DH12-40DH12-45DH12-50DH12-55DH12-60DH12-70DH12-80DH12-90DH12-100DH12-110DH12-120DH14-24DH14-26DH14-28DH14-30DH14-32DH14-36DH14-40DH14-45DH14-50DH14-55DH14-60DH14-70DH14-80DH14-90DH14-100DH14-110DH14-120DH16-24DH16-26DH16-28DH16-30DH16-32DH16-36DH16-40DH16-45DH16-50DH16-55DH16-60DH16-70DH16-80DH16-90DH16-100DH16-110DH16-120DH20-40DH20-45DH20-50DH20-55DH20-60DH20-70DH20-80DH20-90DH20-100DH20-110DH20-120
10101012121212121212121212121212121212121212141414141414141414141414141414141416161616161616161616161616161616162020202020202020202020
100110120
20222426283032364045505560708090
100110120
2426283032364045505560708090
100110120
2426283032364045505560708090
100110120
4045505560708090
100110120
132132132210210210210210210210210210210210210210210210210210210210260260260260260260260260260260260260260260260260260350350350350350350350350350350350350350350350350350485485485485485485485485485485485
PartNumber ØD m6
LengthL js14
Double Shear Strength*
(kN)
MaterialThrough hardened Steel 100 Cr6 (1.3505) to HV550-650.* Double Shear Strengths: Tested to ISO 8749.
See DP dowels for hole tolerances and fits.Shorter lengths available in some sizes, P.O.A.
https://amironic.co.il/
https://amironic.co.il/
M E C H A N I C A L
Product information updated May 2017 and subject to change. Please click the product links for prices and availability.
15°0.8µ
r
L js15
ØDm6
Extractable Dowel PinsHard Ground Steel : DIN 7979D : 4 - 10mm Dia.
DHX
Chamfered End Threaded End
DHX4-10DHX4-12DHX4-14DHX4-16DHX4-20DHX4-24DHX4-28DHX4-30DHX4-32DHX4-36DHX4-40DHX4-50DHX5-10DHX5-12DHX5-14DHX5-16DHX5-18DHX5-20DHX5-24DHX5-28DHX5-30DHX5-32DHX5-36DHX5-40DHX5-45DHX5-50DHX6-12DHX6-14DHX6-16DHX6-18DHX6-20DHX6-24DHX6-28
444444444444555555555555556666666
101214162024283032364050101214161820242830323640455012141618202428
M2.5M2.5M2.5M2.5M2.5M2.5M2.5M2.5M2.5M2.5M2.5M2.5M3M3M3M3M3M3M3M3M3M3M3M3M3M3M4M4M4M4M4M4M4
PartNumber ØD m6 L js15
ThreadSize
DHX6-30DHX6-32DHX6-36DHX6-40DHX6-45DHX6-50DHX6-55DHX6-60DHX6-70DHX6-80DHX8-16DHX8-18DHX8-20DHX8-24DHX8-28DHX8-30DHX8-32DHX8-36DHX8-40DHX8-45DHX8-50DHX8-55DHX8-60DHX8-70DHX8-80DHX8-90DHX8-100DHX10-16DHX10-20DHX10-24DHX10-28DHX10-30DHX10-32
666666666688888888888888888
101010101010
3032364045505560708016182024283032364045505560708090
100162024283032
M4M4M4M4M4M4M4M4M4M4M5M5M5M5M5M5M5M5M5M5M5M5M5M5M5M5M5M6M6M6M6M6M6
PartNumber ØD m6 L js15
ThreadSize
MaterialThrough hardened and ground Steel 100 Cr6 (1.3505) to HV 550-650.Available in A2 Stainless Steel, P.O.A.These dowel pins have an air release flat ground to the full length of the pin to overcome the problem of reduced retention in blind holes due to trapped air.
https://amironic.co.il/
https://amironic.co.il/
M E C H A N I C A L
Product information updated May 2017 and subject to change. Please click the product links for prices and availability.
15°0.8µ
r
L js15
ØDm6
Extractable Dowel PinsHard Ground Steel : DIN 7979D : 10 - 20mm Dia.
DHX
Chamfered End Threaded End
DHX10-36DHX10-40DHX10-45DHX10-50DHX10-55DHX10-60DHX10-70DHX10-80DHX10-90DHX10-100DHX10-120DHX12-20DHX12-24DHX12-28DHX12-30DHX12-32DHX12-36DHX12-40DHX12-45DHX12-50DHX12-55DHX12-60DHX12-70DHX12-80DHX12-90DHX12-100DHX12-120DHX14-28DHX14-32DHX14-36DHX14-40DHX14-45DHX14-50
101010101010101010101012121212121212121212121212121212141414141414
364045505560708090
100120
2024283032364045505560708090
100120
283236404550
M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M8M8M8M8M8M8
PartNumber ØD m6 L js15
ThreadSize
DHX14-55DHX14-60DHX14-70DHX14-80DHX14-90DHX14-100DHX14-120DHX16-32DHX16-36DHX16-40DHX16-45DHX16-50DHX16-55DHX16-60DHX16-70DHX16-80DHX16-90DHX16-100DHX16-120DHX20-32DHX20-40DHX20-45DHX20-50DHX20-55DHX20-60DHX20-70DHX20-80DHX20-90DHX20-100DHX20-120
141414141414141616161616161616161616162020202020202020202020
5560708090
100120
32364045505560708090
100120
324045505560708090
100120
M8M8M8M8M8M8M8M8M8M8M8M8M8M8M8M8M8M8M8M10M10M10M10M10M10M10M10M10M10M10
PartNumber ØD m6 L js15
ThreadSize
MaterialThrough hardened and ground Steel 100 Cr6 (1.3505) to HV 550-650.Available in A2 Stainless Steel, P.O.A.These dowel pins have an air release flat ground to the full length of the pin to overcome the problem of reduced retention in blind holes due to trapped air.
https://amironic.co.il/
https://amironic.co.il/
M E C H A N I C A L
Product information updated May 2017 and subject to change. Please click the product links for prices and availability.
Taper Dowel PinsMild Steel : DIN 1B : 1.5 - 12mm Dia.
TP
MaterialMild Steel (1.0718). Also available in 303 and 316 Stainless Steel, P.O.A.Other lengths available, P.O.A. 14, 16 and 20mm diameter dowel pins available as standard in lengths up to 150mm, P.O.A. Specials and selection kits available, P.O.A.
1.51.51.51.51.51.51.52.02.02.02.02.02.02.02.02.02.02.52.52.52.52.52.52.52.52.53.03.03.03.03.03.03.03.03.03.03.03.04.04.04.04.04.0
68
1014161820
68
1012141618202224
68
10121416182024
68
10121416182022242830
68
101214
0.230.230.230.230.230.230.230.300.300.300.300.300.300.300.300.300.300.400.400.400.400.400.400.400.400.400.450.450.450.450.450.450.450.450.450.450.450.450.600.600.600.600.60
PartNumber ØD L js15 CTP1.5-6TP1.5-8TP1.5-10TP1.5-14TP1.5-16TP1.5-18TP1.5-20TP2-6TP2-8TP2-10TP2-12TP2-14TP2-16TP2-18TP2-20TP2-22TP2-24TP2.5-6TP2.5-8TP2.5-10TP2.5-12TP2.5-14TP2.5-16TP2.5-18TP2.5-20TP2.5-24TP3-6TP3-8TP3-10TP3-12TP3-14TP3-16TP3-18TP3-20TP3-22TP3-24TP3-28TP3-30TP4-6TP4-8TP4-10TP4-12TP4-14
888888888888888
101010101010101010101010101012121212121212121212121212
20222428303236404550556065708028303236404550556065708090
100303236404550556065708090
100
1.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.21.21.21.21.21.21.21.21.21.21.21.21.21.21.61.61.61.61.61.61.61.61.61.61.61.61.6
PartNumber ØD L js15 CTP8-20TP8-22TP8-24TP8-28TP8-30TP8-32TP8-36TP8-40TP8-45TP8-50TP8-55TP8-60TP8-65TP8-70TP8-80TP10-28TP10-30TP10-32TP10-36TP10-40TP10-45TP10-50TP10-55TP10-60TP10-65TP10-70TP10-80TP10-90TP10-100TP12-30TP12-32TP12-36TP12-40TP12-45TP12-50TP12-55TP12-60TP12-65TP12-70TP12-80TP12-90TP12-100
444444444455555555555555566666666666666666
161820222428303236401012141618202224283032364045501012141618202224283032364045505560
0.600.600.600.600.600.600.600.600.600.600.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.90
PartNumber ØD L js15 CTP4-16TP4-18TP4-20TP4-22TP4-24TP4-28TP4-30TP4-32TP4-36TP4-40TP5-10TP5-12TP5-14TP5-16TP5-18TP5-20TP5-22TP5-24TP5-28TP5-30TP5-32TP5-36TP5-40TP5-45TP5-50TP6-10TP6-12TP6-14TP6-16TP6-18TP6-20TP6-22TP6-24TP6-28TP6-30TP6-32TP6-36TP6-40TP6-45TP6-50TP6-55TP6-60
3.2µ
L js15
r
r
C
ØD
Rounded Ends
https://amironic.co.il/
https://amironic.co.il/
M E C H A N I C A L
Product information updated May 2017 and subject to change. Please click the product links for prices and availability.
1:50ØD
75°
L
Extractable Taper Dowel PinsMild Steel : DIN 7978 (ISO 8736) : 6 - 20mm Dia.
TPX
MaterialMild Steel (1.0718). Also available in 303 and 316 Stainless Steel, P.O.A.Available with male thread to DIN 7977, P.O.A.Specials available, P.O.A.
66666666666666666888888888888888888
1618202426283032364045505560708090202426283032364045505560708090
100110120
M4M4M4M4M4M4M4M4M4M4M4M4M4M4M4M4M4M5M5M5M5M5M5M5M5M5M5M5M5M5M5M5M5M5M5
PartNumber ØD L ThreadTPX6-16TPX6-18TPX6-20TPX6-24TPX6-26TPX6-28TPX6-30TPX6-32TPX6-36TPX6-40TPX6-45TPX6-50TPX6-55TPX6-60TPX6-70TPX6-80TPX6-90TPX8-20TPX8-24TPX8-26TPX8-28TPX8-30TPX8-32TPX8-36TPX8-40TPX8-45TPX8-50TPX8-55TPX8-60TPX8-70TPX8-80TPX8-90TPX8-100TPX8-110TPX8-120
141414141414141414141416161616161616161616162020202020202020202020
4045505560708090
100110120
4045505560708090
100110120
4045505560708090
100110120
M8M8M8M8M8M8M8M8M8M8M8M10M10M10M10M10M10M10M10M10M10M10M12M12M12M12M12M12M12M12M12M12M12
PartNumber ØD L ThreadTPX14-40TPX14-45TPX14-50TPX14-55TPX14-60TPX14-70TPX14-80TPX14-90TPX14-100TPX14-110TPX14-120TPX16-40TPX16-45TPX16-50TPX16-55TPX16-60TPX16-70TPX16-80TPX16-90TPX16-100TPX16-110TPX16-120TPX20-40TPX20-45TPX20-50TPX20-55TPX20-60TPX20-70TPX20-80TPX20-90TPX20-100TPX20-110TPX20-120
101010101010101010101010101010101012121212121212121212121212
2426283032364045505560708090
100110120
32364045505560708090
100110120
M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M8M8M8M8M8M8M8M8M8M8M8M8M8
PartNumber ØD L ThreadTPX10-24TPX10-26TPX10-28TPX10-30TPX10-32TPX10-36TPX10-40TPX10-45TPX10-50TPX10-55TPX10-60TPX10-70TPX10-80TPX10-90TPX10-100TPX10-110TPX10-120TPX12-32TPX12-36TPX12-40TPX12-45TPX12-50TPX12-55TPX12-60TPX12-70TPX12-80TPX12-90TPX12-100TPX12-110TPX12-120
Rounded End Threaded End
https://amironic.co.il/
https://amironic.co.il/
M E C H A N I C A L
Product information updated May 2017 and subject to change. Please click the product links for prices and availability.
Chamfered End Rounded End
Full Length Groove PinsMild Steel : Type GP3 (DIN 1473) : 1 - 4mm Dia.
GRP
GRP2.5-18GRP2.5-20GRP2.5-22GRP2.5-24GRP2.5-26GRP2.5-28GRP2.5-30GRP3-6GRP3-8GRP3-10GRP3-12GRP3-14GRP3-16GRP3-18GRP3-20GRP3-22GRP3-24GRP3-26GRP3-28GRP3-30GRP4-6GRP4-8GRP4-10GRP4-12GRP4-14GRP4-16GRP4-18GRP4-20GRP4-22GRP4-24GRP4-26
2.52.52.52.52.52.52.53.03.03.03.03.03.03.03.03.03.03.03.03.04.04.04.04.04.04.04.04.04.04.04.0
18202224262830 6 81012141618202224262830 6 8101214161820222426
0.30.30.30.30.30.30.30.40.40.40.40.40.40.40.40.40.40.40.40.40.50.50.50.50.50.50.50.50.50.50.5
PartNumber ØD m6 L js15 C
MaterialMild Steel. A2 Stainless Steel available, P.O.A.1mm, 1.2mm (Type GP3 only) plus 10mm & 12mm diameters available, P.O.A.Hardened Steel, A4 Stainless Steel and Brass available to special order.14mm, 16mm & 20mm diameters also available to special order.Note: The groove diameter must be measured using ring gauges. The groove diameter figures are valid for Steel only. Stainless Steel grooved pins have a slightly smaller diameter over the grooves.
FeaturesGrooved pins are solid pins with three swaged grooves at 120° pitch along all or part of their length. When the pin is driven into a drilled hole of suitable diameter, the material displaced by the grooving process is forced back, to partially close up the grooves and lock the pin into place.• They do not need a precision reamed hole.• They can have parallel grooves or tapered grooves. Parallel grooves give the pin
high resistance to vibration, but need more force to insert.• They can be grooved on only part of the length, so that where the pin has to be
firmly fixed in one part of an assembly, but be a clearance fit on the other, both parts can be drilled to the same diameter.
120° ±20°L js15 C
r
C
ØD70°±3°
15°
PartNumber ØD L js15 CGRP1.5-4GRP1.5-5GRP1.5-6GRP1.5-8GRP1.5-10GRP1.5-12GRP1.5-14GRP1.5-16GRP1.5-18GRP1.5-20GRP2-4GRP2-5GRP2-6GRP2-8GRP2-10GRP2-12GRP2-14GRP2-16GRP2-18GRP2-20GRP2-22GRP2-24GRP2-26GRP2-28GRP2-30GRP2.5-6GRP2.5-8GRP2.5-10GRP2.5-12GRP2.5-14GRP2.5-16
1.51.51.51.51.51.51.51.51.51.52.02.02.02.02.02.02.02.02.02.02.02.02.02.02.02.52.52.52.52.52.5
4 5 6 8101214161820 4 5 6 81012141618202224262830 6 810121416
0.200.200.200.200.200.200.200.200.200.200.250.250.250.250.250.250.250.250.250.250.250.250.250.250.250.300.300.300.300.300.30
https://amironic.co.il/
https://amironic.co.il/
M E C H A N I C A L
Product information updated May 2017 and subject to change. Please click the product links for prices and availability.
Chamfered End Rounded End
Other options available:Type GP1 (DIN 1471, similar to ISO 8744)Full length taper grooves used to fix two or more components together, but with less insertion force.
Type GP2 (DIN 1472, similar to ISO 8745)Half length taper grooves used where part of the assembly must be a free fit.
Type GP4 (DIN 1474, similar to ISO 8741)Half length reverse taper grooves used where the ungrooved portion acts as a stop or handle.
Type GP8 (DIN 1475, similar to ISO 8742)Third length centre grooves used on hinges or clevises where the two ends must act as pivots.
L js15
r
CC
ØD
CC L js15½ L
ØDr
CC L js151⁄3 L
ØDr
½ LC CL js15
ØDr
Full Length Groove PinsMild Steel : Type GP3 (DIN 1473) : 4 - 8mm Dia.
GRP
GRP4-28GRP4-30GRP4-32GRP4-40GRP4-45GRP4-50GRP5-8GRP5-10GRP5-12GRP5-14GRP5-16GRP5-18GRP5-20GRP5-22GRP5-24GRP5-26GRP5-28GRP5-30GRP5-32GRP5-36GRP5-40GRP5-45GRP5-50GRP6-8GRP6-10GRP6-12GRP6-14GRP6-16GRP6-18GRP6-20GRP6-22
4444445555555555555555566666666
283032404550 810121416182022242628303236404550 810121416182022
0.50.50.50.50.50.50.60.60.60.60.60.60.60.60.60.60.60.60.60.60.60.60.60.80.80.80.80.80.80.80.8
PartNumber ØD m6 L js15 C
GRP6-24GRP6-26GRP6-28GRP6-30GRP6-32GRP6-36GRP6-40GRP6-45GRP6-50GRP6-55GRP6-60GRP8-10GRP8-12GRP8-14GRP8-16GRP8-18GRP8-20GRP8-22GRP8-24GRP8-26GRP8-28GRP8-30GRP8-32GRP8-36GRP8-40GRP8-45GRP8-50GRP8-55GRP8-60GRP8-65GRP8-70
6666666666688888888888888888888
24262830323640455055601012141618202224262830323640455055606570
0.80.80.80.80.80.80.80.80.80.80.81.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.0
PartNumber ØD m6 L js15 C
120° ±20°L js15 C
r
C
ØD70°±3°
15°
https://amironic.co.il/
https://amironic.co.il/