Dimatix Materials Printer DMP-2850 - Fujifilm · 2019-03-15 · Drop W atc her View Fiducial Camer...

2
System Description Flat substrate, xyz stage, inkjet deposition system Low cost, user-fillable piezo-based inkjet print cartridges Built-in drop jetting observation system Fiducial camera for substrate alignment and measurement Variable jetting resolution and pattern creation PC-controlled with Graphical User Interface (GUI) application software Capable of jetting a wide range of fluids Heated vacuum platen Cartridge cleaning station Includes software Printable area - Substrate < 0.5 mm thickness: 210 mm x 315 mm (8.27 in x 12.4 in) - Substrate 0.5 - 25 mm thickness: 210 mm x 260 mm (8.27 in x 10.2 in) Repeatability: ± 25 μm (± 0.001 in) Substrate holder - Vacuum platen - Temperature adjustable; ambient to 60° C System Footprint: 673 mm x 584 mm x 419 mm (26 in x 23 in x 16 in) Weight approximately 50.7 kg (111.8 lbs) Power 100-120/200-240 VAC 50/60 Hz 375 W maximum Operating range 15-40° C at 5-80% RH non-condensing Altitude up to 2000 m Altitude up to 2000 m Safety and EMC compliance - Safety: NRTL Certified to EN 61010-1, UL 61010-1, CSA 22.2 No. 61010-1 - EMC: EN61326-1 Class A, FCC Part 15 Class A Mechanical System Fiducial Camera Allows substrate alignment using reference marks Allows positioning a print origin or reference point to match substrate placement Provides measurement of features and locations Provides inspection and image capture of printed pattern or drops Provides cartridge alignment when using multiple cartridges Allows matching drop placement to previously patterned substrate Cartridge Type: Piezo-driven jetting device with integrated reservoir and heater Usable Ink Capacity: Up to 1.5 ml (user-fillable) Materials Compatibility: Many water-based, solvent, acidic or basic fluids - Nozzles: 16 nozzles, single row, 100 dpi - Drop Volume: 1 (DMC-11601) and 10 (DMC-11610) picoliter nominal Not Available after August 30, 2019 New Cartridge Products to be available in 2020. Contact FUJIFILM Dimatix for more information Control PC and Application Software Pre-loaded patterned templates Pattern preview Editors: Pattern, piezo drive waveform, cleaning cycle, substrate setting Bitmap (1 bit) files accepted Replaceable Items Print cartridge with one-time user-fillable reservoir Cleaning station nozzle blotting pad Drop watcher fluid absorbing pad Dimatix Materials Printer DMP-2850 Drop Watcher View 0 μm 100 μm 200 μm 300 μm 400 μm Fiducial Camera View www.dimatix.com PDS00085 Rev.05 3/11/19

Transcript of Dimatix Materials Printer DMP-2850 - Fujifilm · 2019-03-15 · Drop W atc her View Fiducial Camer...

Page 1: Dimatix Materials Printer DMP-2850 - Fujifilm · 2019-03-15 · Drop W atc her View Fiducial Camer a View Dimatix Materials Printer DMP-2850 0 µm 100 µm 200 µm 300 µm 400 µm

Drop W atc her View

Fiducial Camer a V iewVV

Dimatix Materials PrinterDMP-2850

0 µm

100 µm

200 µm

300 µm

400 µm

System Description Flat substrate, xyz stage, inkjet deposition system Low cost, user-�llable piezo-based inkjet print cartridges Built-in drop jetting observation system Fiducial camera for substrate alignment and measurement Variable jetting resolution and pattern creation PC-controlled with Graphical User Interface (GUI) application software Capable of jetting a wide range of �uids Heated vacuum platen Cartridge cleaning station Includes software

Mechanical System Printable area - Substrate < 0.5 mm thickness: 210 mm x 315 mm (8.27 in x 12.4 in) - Substrate 0.5 - 25 mm thickness: 210 mm x 260 mm (8.27 in x 10.2 in) Repeatability: ± 25 µm (± 0.001 in) Substrate holder - Vacuum platen - Temperature adjustable; ambient to 60° C System Footprint: 673 mm x 584 mm x 419 mm (26 in x 23 in x 16 in) Weight approximately 50.7 kg (111.8 lbs) Power 100-120/200-240 VAC 50/60 Hz 375 W maximum Operating range 15-40° C at 5-80% RH non-condensing Altitude up to 2000 m Safety and EMC compliance - Safety: NRTL Certi�ed to EN 61010-1, UL 61010-1, CSA 22.2 No. 61010-1 - EMC: EN61326-1 Class A, FCC Part 15 Class A

Fiducial Camera Allows substrate alignment using reference marks Allows positioning a print origin or reference point to match substrate placement Provides measurement of features and locations Provides inspection and image capture of printed pattern or drops Provides cartridge alignment when using multiple cartridges Allows matching drop placement to previously patterned substrate

Cartridge Type: Piezo-driven jetting device with integrated reservoir and heater Usable Ink Capacity: Up to 1.5 ml (user-�llable) Materials Compatibility: Many water-based, solvent, acidic or basic �uids Number of Nozzles: 16 nozzles, 254 µm spacing, single row Drop Volume: 1 (DMC-11601) and 10 (DMC-11610) picoliter nominal Control PC and Application Software Replaceable Items emit-eno htiw egdirtrac tnirP setalpmet denrettap dedaol-erP

riovreser elballfi-resu weiverp nrettaP Editors: Pattern, piezo drive waveform, Cleaning station nozzle blotting pad

dap gnibrosba diufl rehctaw porD gnittes etartsbus ,elcyc gninaelc Bitmap (1 bit) �les accepted Optional software for DXF, Gerber, GDSII and OASIS �le conversion to Bitmap

Altitude up to 2000 m

System DescriptionFlat substrate, xyz stage, inkjet deposition system

Low cost, user-�llable piezo-based inkjet print cartridges Built-in drop jetting observation system Fiducial camera for substrate alignment and measurement Variable jetting resolution and pattern creation PC-controlled with Graphical User Interface (GUI) application software Capable of jetting a wide range of �uids Heated vacuum platen Cartridge cleaning station Includes software

Printable area - Substrate < 0.5 mm thickness: 210 mm x 315 mm (8.27 in x 12.4 in) - Substrate 0.5 - 25 mm thickness: 210 mm x 260 mm (8.27 in x 10.2 in) Repeatability: ± 25 µm (± 0.001 in) Substrate holder - Vacuum platen - Temperature adjustable; ambient to 60° C System Footprint: 673 mm x 584 mm x 419 mm (26 in x 23 in x 16 in) Weight approximately 50.7 kg (111.8 lbs) Power 100-120/200-240 VAC 50/60 Hz 375 W maximum Operating range 15-40° C at 5-80% RH non-condensing Altitude up to 2000 m Altitude up to 2000 m Safety and EMC compliance - Safety: NRTL Certi�ed to EN 61010-1, UL 61010-1, CSA 22.2 No. 61010-1 - EMC: EN61326-1 Class A, FCC Part 15 Class A

Mechanical System

Fiducial CameraAllows substrate alignment using reference marks

Allows positioning a print origin or reference point to match substrate placement Provides measurement of features and locations Provides inspection and image capture of printed pattern or drops Provides cartridge alignment when using multiple cartridges Allows matching drop placement to previously patterned substrate

CartridgeType: Piezo-driven jetting device with integrated reservoir and heaterUsable Ink Capacity: Up to 1.5 ml (user-�llable)

Materials Compatibility: Many water-based, solvent, acidic or basic �uids

- Nozzles: 16 nozzles, single row, 100 dpi - Drop Volume: 1 (DMC-11601) and 10 (DMC-11610) picoliter nominal

Not Available after August 30, 2019

New Cartridge Products to be available in 2020. Contact FUJIFILM Dimatix for more information

Control PC and Application SoftwarePre-loaded patterned templatesPattern previewEditors: Pattern, piezo drive waveform,cleaning cycle, substrate setting

Bitmap (1 bit) �les accepted

Replaceable ItemsPrint cartridge with one-timeuser-�llable reservoirCleaning station nozzle blotting padDrop watcher �uid absorbing pad

Dimatix Materials PrinterDMP-2850

Drop Watcher View

0 µm

100 µm

200 µm

300 µm

400 µm

Fiducial Camera View

www.dimatix.comPDS00085 Rev.05 3/11/19

Page 2: Dimatix Materials Printer DMP-2850 - Fujifilm · 2019-03-15 · Drop W atc her View Fiducial Camer a View Dimatix Materials Printer DMP-2850 0 µm 100 µm 200 µm 300 µm 400 µm

www.dimatix.com

Tel: +44 7739 863 505Fax: +44 870 167 4328Email: [email protected]

FUJIFILM Dimatix, Inc.109 Etna RoadLebanon, NH 03766USA

Tel: (603) 443-5300Fax: (603) 448-9870Email: [email protected]

FUJIFILM Dimatix, Inc.2250 Martin AvenueSanta Clara, CA 95050USA

Tel: (408) 565-9150Fax: (408) 565-9151Email: [email protected]

FUJIFILM Dimatix China Service CenterBuilding 30, 1000 Jinhai RoadPudong New Area, ShanghaiChina 201206Email: [email protected]

Singapore O�ce:Email: [email protected]

Taiwan O�ce:Email: [email protected]

Korea Office:Email: [email protected]

Europe Office:New Hampshire Facility: Japan O�ce:Corporate Office: China O�ce:FUJIFILM Global Graphic Systems Co., Ltd. 2-26-30 NishiazabuMinato-ku, Tokyo 106-0031JapanAdvanced Marking Strategy Division

Phone: +81 3 6419 0530 Fax: +81 3 6419 9840 E-mail: dmp_�gs@�gs.fuji�lm.co.jp

The Dimatix Materials Printer (DMP) is a benchtop materials deposition system designed for micro-precision jetting a variety of functional fluids onto virtually any surface, including plastic, glass, ceramics, and silicon, as well as flexible substrates from membranes, gels, and thin films to paper products. A complete turnkey system, the DMP facilitates developing and testing manufacturing processes and product prototypes. It also can be used for prototyping of products from flexible circuits, RFID tags and displays to DNA arrays, and wearable electronics. By employing inexpensive exchangeable cartridges that researchers can fill with their own fluid materials, the DMP system minimizes waste of expensive fluid materials, thereby eliminating the cost and complexity associated with traditional product development and prototyping.

The Dimatix Materials Cartridge is a cartridge-based inkjet printhead used with the DMP and available in 1 pl and 10 pl drop volumes. Based on FUJIFILM Dimatix’s proprietary Silicon MEMS technology, the 16-jet Dimatix Materials Cartridge is designed for high-resolution, non-contact jetting of functional fluids in a broad range of applications. The industry-first 1 pl cartridge can deposit features as small as 20 μm (20 millionths of a meter) to fabricate products such as organic thin-film transistors (TFTs) and printed circuits. In biotechnology, the Dimatix Materials Cartridge allows researchers to closely pack large numbers of elements in DNA arrays, to permit more accurate and efficient analyses.

PDS00085 R ev. 04 11 /04/16

DMP-2850

The Dimatix Materials Printer (DMP)is a benchtop materials deposition system designed for micro-precision jetting a variety of functional fluids onto virtually any surface, including plastic, glass, ceramics, and silicon, as well as flexible substrates from membranes, gels, and thin films to paper products. A complete turnkey system, the DMP facilitates developing and testing manufacturing processes and product prototypes. It also can be used for prototyping of products from flexible circuits, RFID tags and displays to DNA arrays, and wearable electronics. By employing inexpensive exchangeable cartridges that researchers can fill with their own fluid materials, the DMP system minimizes waste of expensive fluid materials, thereby eliminating the cost and complexity associated with traditional product development and prototyping.

The Dimatix Materials Cartridge is a cartridge-based inkjet printhead used with the DMP. Based on FUJIFILMDimatix’s proprietary Silicon MEMS technology, the Dimatix Materials Cartridge is designed for high- resolution, non-contact jetting of functional �uids in a broad range ofapplications. The cartridge can deposit features to fabricate products such as organic thin-�lm transistors (TFTs) and printed circuits. In biotechnology, theDimatix Materials Cartridge allowsresearchers to closely pack large numbersof elements in DNA arrays, to permitmore accurate and e�cient analyses.

PDS00085 Rev.05 3/11/19www.dimatix.com

Tel: +44 7739 863 505Fax: +44 870 167 4328Email: [email protected]

FUJIFILM Dimatix, Inc.109 Etna RoadLebanon, NH 03766USA

Tel: (603) 443-5300Fax: (603) 448-9870Email: [email protected]

FUJIFILM Dimatix, Inc.2250 Martin AvenueSanta Clara, CA 95050USA

Tel: (408) 565-9150Fax: (408) 565-9151

FUJIFILM Dimatix China Service CenterBuilding 30, 1000 Jinhai RoadPudong New Area, ShanghaiChina 201206Email: [email protected]

Singapore O�ce:Email: [email protected]

Taiwan O�ce:Email: [email protected]

Korea Office:Email: [email protected]

Europe Office:New Hampshire Facility:Corporate Office: China O�ce:FUJIFILM Global Graphic Systems Co., Ltd. 2-26-30 NishiazabuMinato-ku, Tokyo 106-0031JapanAdvanced Marking Strategy Division

Phone: +81 3 6419 0530 Fax: +81 3 6419 9840 E-mail: dmp_�gs@�gs.fuji�lm.co.jp

Email: [email protected]

Japan O�ce: