Post on 14-Jun-2015
description
COMPLIANT
AEROSPACE AND DEFENSE MANUFACTURING CENTER
BECAUSE IT’S ALL ABOUT THE MISSION ®
CAPE CANAVERAL, FLORIDA USA
• ECONOMICALLY DISADVANTAGED WOMAN-OWNED SMALL BUSINESS
• SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESS
• MINORITY-OWNED
• Precision Machining
and Fabrication
• Avionics
• Test and Evaluation
• Specialty
Manufacturing
• Reverse Engineering
Quotes@CraigTechInc.com
CRAIG TECHNOLOGIES SUPPORTS YOUR PROJECTS
FROM CONCEPT TO REAL-WORLD APPLICATION
We design, prototype,
manufacture, and
perform final
acceptance testing for
a wide variety of
avionics & electro-
mechanical systems
and components.
We provide
technical
services,
analysis, and
business
support for
projects large and
small.
We repair, over-
haul, refurbish,
and complete
preventive
maintenance to
extend the life of
mission-critical
systems.
We engineer,
validate, and
integrate software
systems to match
the capability of
custom hardware
platforms.
Precision Machining and Fabrication
• CNC Turning and Milling
• CNC Sheet Metal Fabrication
• EDM Wire and Sinker Machining
• Waterjet Cutting
• Welding, Brazing, and Painting
Avionics
• Cable Fabrication
• Digital and Analog Electronics Fabrication
• Environmental Testing
• Satellite Signal Testing
Specialty Manufacturing
• CNC Tube Bending
• Laser Identification and Marking
• Composite Fabrication
• Hydraulic and Pneumatic Pressure Testing
• Mil-Spec Chemical Conversion Coating
• 3-D Printing
Test and Evaluation
• Non-destructive Evaluation (NDE)
• CMM, VCMM Quality Inspection
• Materials and Process Evaluation
• Class 100,000 Clean Room Assembly and
Testing
Craig Technologies delivers award-winning engineering and technical solutions to both
commercial and government clients nationwide. Founded in 1999 by CEO Carol Craig, we
achieve stability through diversity and offer a wide scope of capabilities. Our lean management
team and industry-leading employee benefits help us deliver exceptional customer-driven
solutions at a lower cost. Craig Technologies’ nationally-recognized Aerospace and Defense
Manufacturing Center (ADMC) offers a consolidated design-to-production capability at our
161,000 sq. ft. facility in Cape Canaveral, FL. The ADMC provides a quick and cost-effective
solution to any priority need by supporting multiple product lines under one roof.
COMMERCIAL CUSTOMERS ATK
BOEING
COMTECH SYSTEMS
CONOCO PHILIPS
GE AVIATION
HARRIS
INDUSTRIAL LIGHTING PRODUCTS
LOCKHEED MARTIN
VENCORE
SIEMENS ENERGY
SIERRA NEVADA CORPORATION
SPACE SYSTEMS/LORAL
SPACEX
TOSHIBA
“CRAIG TECHNOLOGIES
BRINGS SERIOUS EXPERTISE
TO THE TABLE AND
CONSTANTLY EXCEEDS
CONTRACT REQUIREMENTS/
SPECS AND WORKMANSHIP …
CONSISTENTLY STANDS UP
AND PROVIDES SUPERIOR
SERVICE AND CONSISTENTLY
SOLVES ALL PROBLEMS WITH
INNOVATIVE LOW COST
(SOMETIMES NO COST)
SOLUTIONS.”
– CUSTOMER FEEDBACK
COMPOSITES EQUIPMENT
Machine Type Mfr. Description Model # X Y Z
All Values in Inches
Oven Cole-Parmer Max Temp - 200⁰C/392⁰F 05015-50 12 10 10
Oven, Precision Quincy Max Temp - 650⁰F 22-650M 37.5 26.5 25.5
Oven, Vacuum Lunair <10ˉ4 TORR Allen Bradley PLC 1000 48 47 48
Oven, Vacuum Fisher Scientific Capacity: 1.5 cu. Ft., Temperature range: Ambient to 280⁰C (536⁰F) 282A 18 12 12
Oven, High Temperature Grieve Max Temp - 1250⁰F AB-1250 36 36 36
Oven, Walk-In Grieve 842 cu ft Modified 34H-1200 72 120 72
Terminal Pull Tester Instron Variable compression up to 45,000 lbs 4502
Terminal Pull Tester Instron Variable compression up to 45,000 lbs 4507-001
Autoclave Baron-Blakeslee MAWP 125 PSIG – 375⁰F BAC510 60 108 60
Paint Booth Devilbliss DF-L-1089-100 120 240 84
Cleaner, Ultrasonic Branson DHA 1000 14 16 10.5
Cleaner, Ultrasonic Delta Sonics, Inc. DT-5H 9 11 10
Electropolisher ESMA, Inc. Tank Volume: 2 gallons E-299 6 12 6
Vacuum Bell, Jar Torr Vac 1x10ˉ6 TORR H26
Chamber, Environmental Test Tenney Engineering Inc. -150⁰C to 200⁰C T16-SPL 48 48 48
Marking System, Laser Telesis Zenith 10F
Cleaning Station Custom
Thermal Sealer Vertrod 24A/CAB
Materials/Processes Milling Turning EDM Structural Bonding
Welding Corrosion Protection
Repair
CRES (Corrosion Resistant Steel)
X X X X X X N/A
Titanium X X X X X X N/A
Inconel X X X X X X N/A
Carbon Steel X X X X X X N/A
Aluminum X X X X X X N/A
Aluminum Honeycomb X N/A X X X X X
Composite Honeycomb X N/A N/A X N/A X X
CRES Honeycomb X N/A X X X X X
MANUFACTURING MATERIALS / PROCESSES
WELDING EQUIPMENT
AVIONICS EQUIPMENT
Equipment Nomenclature Applicable Features/Limits/Specifications
RF- Test Anechoic Chamber, Compact Range 2 Ghz to 50 Ghz
RF & Audio Shielded Room 17.5 ft x 15.5 ft x 8 ft
Vibration Tables – (2) LDS V860 Shakers (2)
UnHoltz-Dickie Controllers
Vibe rated @ 6,000 lbs force
Thermal Testing Chambers (Temp and Humidity) Cincinnati Sub-Zero (48x48x48); Sexton-Espec
(55x55.5x34.5); Thermotron (24x24x24) (-100⁰F to
392⁰F & 10% to 98% RH)
Cold Plate Chillers – Dry Cooler -15⁰C/5⁰F to 70⁰C/158⁰F
Mass Spectrometer Leak-Detection System Adixen ASM.192 T2D+
DITMCO 9503-12B Analyzer – 10,000 Test Points
System
Automated Tester: Continuity, DC Hi-pot, and
Isolation; Resistance testing
OSHA Approved Laboratory vented fume hoods (2) Ventilation velocity of 103 ft/min
Precision high temperature drying ovens 3.75 cu ft
Tenney Thermal-Vacuum Chamber 1.70 cu ft
Uninterruptible Power System (UPS) 20,000 Sq Ft easily reconfigurable
Machine Type Model X Y Z
All Values in Inches
Bender, Metal/Tube, Power Conrac 211 1LH 216 3
Bender, Metal/Tube, Manual Clark and Lewis CL75MU 126 2
Bender, Metal/Tube, CNC Eaton Leonard VB-100-HP 174 1
Flare/Finish, Tube End Phi 609V 2
Flare/Finish, Tube End Clark and Lewis CL2SD3 53 2
Measuring, Vector Eaton Leonard S5-XP-UPG
TUBE BENDING EQUIPMENT
Machine Type Model X Y Z
All Values in Inches
Mill, CNC, Vertical, 3-Axis Mazak VCN-410-A 22.05 30 20
Mill, CNC, Vertical, 3-Axis – Nexus Mazak VCN700D50-II 60.24 27.56 25.59
Mill, CNC, Vertical, 3-Axis Hurco BMC 3017 30 18 20
Mill, CNC, Vertical Mazak FJV-60/80 78.7 55.2 23
Mill, CNC, Vertical, 3-Axis, Graphite Hurco VM10HX 18 12 18
Mill, CNC, Horizontal, 3-Axis Mazak FH7800 41.34 31.5 34.65
Mill, CNC, 3-Axis – My Center Kitamura 4XiF 40 20 20
Mill, CNC, 5 Axis Hurco VMX42UI 12.5 12.5 12.5
Mill, CNC, 5 Axis – Nexus Mazak 510C-II 10 10 10
EDM, Wire 2-Axis Mitsubishi FA10MD 12 10 8
EDM, Wire 6-Axis Makino SP64 25.6 15.74 16.2
EDM, Wire 4-Axis Sodick AG600L 23.6 14.96 13.78
EDM, Drill Current MT30S
EDM, Plunge 3-Axis Sodick AG60L 24 24 18
Waterjet, 2-Axis – Tilt +/- 9.0 OMAX 80X 180 89
Turning Center, CNC Mazak QTN-100 13.2 17
Turning Center, CNC – Nexus Mazak QTN-300 8.85 49
Turning Center, CNC, 4-Axis – Nexus, C
360 degrees
Mazak QTN-350MY-
11
59 6 17.75
Lathe, CNC, 6-Axis, Multiturn Okuma LB3000EX +2.76/-1.97 39.76
Lathe, Manual Hardinge HLV-H 20 11
Lathe, Manual – Can Swing 24” through
13” Gap
Clausing Corp.
Mascot VS2000
72 18
Mill, Manual, Vertical, 3-Axis Bridgeport EZ TRAK 48 12 12
Mill, Manual, Vertical, 3-Axis Bridgeport Series II w/
PROTO-TRAK
35-56 18 12
Mill, Manual, Vertical, 3-Axis Wells-Index 847 33 16 6
Media Blast, Cabinet Uni-Home 503 24 24
Manual Grinding Harig 618 Auto Step 18 6 3
Saw, Band, Vertical Marvel 8-Mark II 96 24 28
Grinder, Cylindrical Victor JMC-600H
Hone, Horizontal Sunnen MBB-1660 24 18
Crane, Overhead – 5-Ton Kranco
MACHINE SHOP EQUIPMENT
INSPECTION EQUIPMENT
Machine Type Model X Y Z
All Values in Inches
CMM Zeiss Contura G2 623534-9803-200 27 39 23
CMM Brown & Sharpe Tesa MicroHite 3D Reflex 454 18 19 15
CMM Brown & Sharpe Global Activ 122210 86 46 36
VCMM Micro Vu Vertex 420 12 12 12
Machine Type Model X Y Z
All Values in Inches
Brake, Press, Foot Baileigh SF-5216
Brake, Press, Hydraulic – Tonnage 17 Pacific 17-4 48
CNC Brake Press Haco SRM 120-10-8 120
Brake, Pan & Box, Manual – Bend Length
– 3” to the full Length of the Machine
Chicago BPU612-6 117 53 16
Brake, Pan & Box, Manual Baileigh V 612-6
Drill Press, Vertical IBARMIA AV 32 4.5 32
Press, Arbor Dake 4M2
Press, Arbor Greenerd 789-000619
Punch, Turret DI-ACRO 0.18 1.375 0.25
Punch, Square DI-ACRO 2HP
Riveter, Power US Industrial Tool 1.50-36 36
Roller Newline 53-04-500 24
Roller Morgan Rushworth PBR1250 50 0.236
Roller, Electric Baileigh SF 50-16
Saw, Band, Vertical Delta/Rockwell 28-350 19 12
Saw, Band, Horizontal Dake SE 912 55.2
Shear, Hand DI-ACRO 24HS
Shear, Corner, Manual DI-ACRO 2P 6
Shear, Corner, Manual TennSMITH SN 6
Shear, Power National Sheetmetal NH5210 48 0.134
Shear, Power Betenbender 48-120
SHEET METAL EQUIPMENT
FOR MORE INFORMATION, PLEASE CONTACT:
QUOTES@CRAIGTECHINC.COM
8550 ASTRONAUT BLVD. | CAPE CANAVERAL, FL 32920
321.613.5620 | CTADMC.COM
TWITTER @CTADMC
NON-DESTRUCTIVE EVALUATION EQUIPMENT
Machine Type Model Description
Fluorescent Inspection Line Ardrox UWW-100 Water Washable, Level 3
Magnetic Particle Probe Parker Research DA-200
Ultrasound Flaw Detector Krautkramer USN 60
Eddy Current Flaw Detector Zetec MIZ 21A
Iplex Olympus VideoScope Olympus IV7435A 4mm diameter
Computed Radiography Scanner GE CR 50XP 12 in x 14 in
Flash Computed Tomography Hytec FCT-2251 7 in x 9 in
Pantak 225KV X-Ray Tube Pantak HF 225 6 ft x 8 ft
Seifert 100KV X-Ray Tube Seifert ES 2 6 ft x 8 ft
Machine Type Model Description
Weldhead, Orbital Astroarc Polysoude HD-750
Weldhead, Orbital Astroarc SK-1500/2500-2T Tubing Size 1 – 2.5
Weldhead, Orbital Astroarc SK-375-2T Range of Tubing 0.25 – 0.375
Weldhead, Orbital Astroarc SK-500-2T Tubing size 0.5 – 0.675
Welder/Cutter, Oxy Acetylene Victor Journeyman 315C
Welder, Multiprocess Miller 350CC/CV GMAW, TIG, Stick
Welder, GMAW Miller Millermatic 250X
Welder, GTAW Lincoln Precision TIG 375
Welder, GTAW Miller Syncrowave 351
Welder, Spot Resistance Miller SSW 2020 ATT
Weld, Table Delta/Rockwell Keyhole Slotted Table – 144” x 72” x 2”
Cutter, Plasma Dayton 5Z031B
Cutter, Plasma Miller Spectrum 2050