AM
CO
L C
OR
PO
RA
TIO
N
P R E C I S I O N L U B R I C A T I O N F O R B A N D S A W S
AMCOL pioneered MQL and refined the 6000 Series Applicator for
bandsawing over decades. With our T60A Posi‐pump,
biaxial hose, push‐to connect fittings, and pressure with flow
regulated spray, our system is the most
rugged, reliable, and user friendly
system on the market. The Bandsaw
Spray Assembly equally lubricates
both sides of the blade; it is mounted above the
blade where it is protected from blade breakage
and does not interfere with blade replacement.
344 CANMIST and 305 E CANMIST handle the extreme temperatures and
pressures of high speed band sawing. They are thermally stable and
resist oxidation with no smoke or tacky residue. 344 CANMIST is used for
steel, stainless, Inconel, titanium and other hard to cut metals. 305 E
CANMIST is recommended where ferrous and non‐ferrous metals are
interchanged and is especially effective in cutting aluminum.
Phone: 248-414-5700
Fax: 248-414-7489
E-mail: [email protected]
21435 Dequindre
Hazel Park, MI 48030
Made in the USA
www.amcolcorp.com
A M C O L C O R P O R A T I O N
MQL is Minimum Quantity Lubrication.
MQL matches high performance lubricants
with extremely accurate
spray systems. With MQL,
a minute quantity of
lubricant is dispensed on
the saw blade just prior to
entering the cut. The lubricant is consumed with the cut. The
result: dry parts, dry chips, and a dry machine.
W H Y A M C O L ?W H Y A M C O L ?W H Y A M C O L ?
PS01 AMCOL Precision Lubrication for Bandsaws (R1), 7/2013, AFU, P1
W H A T I S M Q L ?W H A T I S M Q L ?W H A T I S M Q L ?
Benefits of MQL:
Eliminate Coolant Mixing or Maintenance ‐ CANMIST is used
as received. Simply fill the reservoir.
No Coolant Mess ‐ Spray is directed at the side of the blade with no overspray. You’ll have dry parts and a dry floor.
Eliminate Rust and Corrosion ‐ CANMIST is compatible with most metals.
Dry Chips Get Better Value ‐ This is money in your pocket!
MQL is high performance precision lubrication. AMCOL has an MQL system specifically for bandsaws.
U S I N G C A N M I S T A N D T H E A M C O L 6 0 0 0
S E R I E S P R E C I S I O N A P P L I C A T O R
AM
CO
L C
OR
PO
RA
TIO
N
P R E C I S I O N L U B R I C A T I O N F O R B A N D S A W S
How to purchase these AMCOL products:
System Description: AMCOL 6000 Series Applicator for Bandsaws with an Item
ID # 6244‐2B‐10‐BSA‐S. Alternate options for system voltage, reservoir size,
hose length, and others are available.
344 CANMIST and 305 E CANMIST are sold in 6 gallon cases, 5 gallon pails, and
55 gallon drums.
Phone: 248-414-5700
Fax: 248-414-7489
E-mail: [email protected]
21435 Dequindre
Hazel Park, MI 48030
Made in the USA
www.amcolcorp.com
A M C O L C O R P O R A T I O N
System controls include a T60 Posi‐pump with
two manifolded injection meters (one for each side
of the blade) mated to a pressure regulated air
manifold and mounted in a steel enclosure. A
simple pneumatic timer controls the pulse rate of
the injectors. System air is actuated with an electric
air solenoid valve and includes a coalescing filter
with auto‐drain and air pressure regulator.
A half gallon gravity feed liquid reservoir is more than enough to
supply hours of production cutting. A strainer is included to remove fluid
contaminants. A shut‐off valve is also included to
ease maintenance and cleaning.
Biaxial hose carries the liquid and air side by side to the spray block. 10 feet of hose is standard.
A mounted assembly specifically for bandsaws mixes liquid and air to spray both sides of the blade.
Air flow at the mixing block is individually adjustable. The result is an even coating of the blade with no
overspray, mist, or fog.
A S T A N D A R D S Y S T E M J UA S T A N D A R D S Y S T E M J UA S T A N D A R D S Y S T E M J U S T F O R B A N D S A W S S T F O R B A N D S A W S S T F O R B A N D S A W S
PS01 AMCOL Precision Lubrication for Bandsaws (R1), 7/2013, AFU, P2
Top Related