YB4400 Product Guide Imperial DINISO

7/31/2019 YB4400 Product Guide Imperial DINISO

1/36

Features

YB4409: 7,7 t (8.5 USt) three-section boomwith 7,6 m (25 t 2 in) tip height

YB4409XL: 7,7 t (8.5 USt) three-section boomwith 10,2 m (33 t 6 in) tip height

YB4409-2: 8,1 t (9 USt) three-section boomwith 11,6 m (38 t 2 in) tip height

YB4411: 9,5 t (10.5 USt) three-section boomwith 11,6 m (38 t 2 in) tip height

1,8 m (6 t) xed extension (YB4409/XL) and3,6 m (12 t) ofsettable swingaway extension(YB4409-2 and YB4411)

63,4 kW (85 bhp) Cummins diesel engine or59,6 kW (80 bhp) GM EFI dual uel engine

Grove YB4400 SeriesProduct Guide


2/36

Features

BoomStandard:6,4 m (21 t) main boom on the YB4409.9,1 m (30 t) main boom on the YB4409XL.

10, 0 m (32 t 10 in) main boom on theYB4409-2 and YB4411.Optional: Manual ourth main boom sectionadds 3,0 m (10 t) additional main boom lengthon YB4409 and YB4409XL only.

SteeringStandard: our-wheel coordinated steerStandard: two-wheel, our-wheel, andcrab steer with sel alignment (YB4411)Optional: two-wheel, our-wheel, andcrab steer (standard on YB4409-2)

CabStandard: Open air cab shell withoverhead saety glass.Optional:Closed cab with splithinged door, heater/deroster, and all

window glass.

Pivoting boom noseStandard on the YB4409-2 and YB4411 theexclusive pivoting boom nose allows operatorsto decrease the overall boom head depth andoperate in more confned areas.

EngineStandard: Cummins QSB 3.3 Lturbo-charged diesel rated at63,4 kW (85 bhp) at 2600 rpm.


3/36

Contents

Specications 4

YB4409 (dimensions/turning radius/range diagram/load chart) 7

YB4409XL (dimensions/turning radius/range diagram/load chart) 11

YB4409-2 (dimensions/turning radius/range diagram/load chart) 17

YB4411 (dimensions/turning radius/range diagram/load chart) 21YB4409 DIN/ISO (range diagram/load chart) 25

YB4409XL DIN/ISO (range diagram/load chart) 27

YB4409-2 DIN/ISO (range diagram/load chart) 29

YB4411 DIN/ISO (range diagram/load chart) 31Symbols glossary 33


4/36

4

Speciications

Superstructure

Boom

YB4409: 2,9 m 6,5 m (9 t 8 in 21 t 2 in) three-section ull power boom.Maximum tip height: 7,6 m (25 t 2 in)

YB4409XL: 3,8 m 9,2 m (12 t 8 in 30 t 2 in)three- section ull power boom.Maximum tip height: 10,2 m (33 t 6 in)

YB4409-2 and YB4411: 4,2 m 10,0 m (13 t 10 in 32 t 10 in) three-section ull power boom.

Maximum tip height: 11,6 m (38 t 2 in)

*Optional boom

*Boom extension

Boom nose

YB4409 and YB4409XL: Manual ourth main boomly section adds 3,0 m (10 t) additional boom length.

YB4409 and YB4409XL: 1,8 m (6 t) ixed pin onextension

YB4409-2 and YB4411: 3,6 m (12 t) osettableextension3,6 m - 5,4 m (12 t- 18 t) telescopicosettable extension

YB4409 / XL: Single sheave non-pivoting

YB4409-2 and YB4411: Single sheave, three-position(0, + 30, + 80) pivoting boom nose or minimizinghead space requirements. Lowers head height. 0,26 m(10.5 in) when nose is pivoted ully orward.

Boom elevation

Single double acting hydraulic cylinder with integralholding valve.Elevation: 0 to 60 or theYB4409 and YB4409XL

0 to 72 or theYB4409-2 and YB4411

Antitwo block device

Standard anti-two block device, when activated,provides an audible warning to the crane operator anddisengages all crane unctions whose movement cancause two-blocking.

Load indicator wireless LSI

A simple, eective, and easy to use load indicatingsystem used in conjunction with the anti-two block

system to assist the operator in eicient operation othe unit within the limits o the load chart. he displaypanel displays the hook load and warns the operator

when a preset load capacity is exceeded. he warning isby a lashing light on the display panel. In conjunction

with the load display panel (receiver), there is a wirelesstransmitter and load sensing pin attached to the boomhead that transmits the hook load to the display panel.

*Load Moment Indicatorhardwired LMI

Digital display o boom angle, boom length, boomradius, capacity, and allows or operator in-put to set

the limits based on load chart. Displays color codedlight bar and audible alarm with unction cutout iload exceeds entered parameters.

(hardwired system)

Swing

Ball bearing swing circle with 360 continuousrotation.Hydraulic driven worm gear and pinion.Maximum speed: 2.05 rpm

Hydraulic system

YB4409 and 4409XL: (2) gear pumps

YB4409-2 andYB4411: Variable displacement pistonpump and piggyback gear pump.

Combined low: 107,9Lpm (28.5 gpm)

Maximum system operating pressure: 3600 psi

YB4409andYB4409XL: Six section valve bankmounted in dash panel with direct mechanical linkageor low eort lever control.

YB4409-2 and YB4411: Six section valve bank chassismounted; operated via dash mounted, pilot pressurehydraulic joysticks.

Return line ilter with ull low by-pass protection andservice indicator.

89 L (23.5 gal) hydraulic reservoir with sight levelgauge and steel side plating to guard against sideimpact damage.

*Denotes optional equipment


5/36

Grove YB4400 Series 5

Speciications

Superstructure continued

Frame


Hoist speciications

YB4409 / XL: Worm drive with counter-balancevalving. Equal speed power up and down.

YB4409-2 andYB4411: Piston motor drive withspring applied/hydraulic released brake.

Drum diameter: YB4409 / XL: 0,24 m (9.69 in) YB4409-2 andYB4411: 0,27 m (10.63 in)

Maximum single line pull:YB4409 / XL: 4854 kg (10,700 lb)

YB4409-2and YB4411: 6350 kg (14,000 lb)

Maximum single line speed:YB4409 / XL: 26,8 m/min (88 pm)

YB4409-2andYB4411: 36,6 m/min (120 pm)

Maximum permissible single line pull: YB4409 / XL: 3855 kg (8500 lb)

(12,7 mm [1/2 inch] Python Ultra XIPS)YB4409-2 and YB4411: 4536 kg (10,000 lb)(14,0 mm [9/16 inch] EEIPS)

Rope length :YB4409 / XL: (three-section boom) 29,6 m (97 t)

(our-section boom) 39,6 m (130 t)YB4409-2andYB4411: 36,6 m (120 t)

Carrier

High strength alloy steel constructed with integraloutrigger housings; ront and rear liting, towing,and tie-down lugs. 38 t2 carrydeck size with6350 kg (14,000 lb) carrying capacity (YB4409/XL /

YB4409-2) and 7711 kg (17,000 lb) carrying capacity(YB4411). Deck coated with anti-skid treatment.

Outriggers

YB4409, YB4409XL and YB4409-2: Front and rearoblique type beams at all our corners with integralholding valves. Outrigger pads orm an integral parto the beam.

YB4411: Hydraulic telescoping beam with obliquetype jack provides extended and down and retractedand down liting capacities. Integral holding valves onboth beam and jack.

Padsize YB4400 Series:

18 cm x 20 cm (7.4 in x 7.8 in)Maximum outrigger pad load: YB4409/XL: 122 psi

YB4411: 387 psi

YB4409-2: 135 psi

Outrigger controls

YB4409-2, YB4409 and YB4409XL: Lever controlslocated on dash panel which operate the beams in

pairs rom side to side.

YB4411: wo switch operation mounted on dashpanel. One -three- position rocker switch to select allbeams/jacks, let beams/jacks only, or right beams/

jacks only. Separate -our- way toggle switch toactivate beams out/in and jacks down/up. Level bubbleindicator located inside operators compartment.

*Independent outrigger controls available as anoption.

Standard engine Tier III

Cummins QSB 3.3 L turbo-charged diesel rated at63,4 kW (85 bhp) at 2600 rpm. Supplied with 110 Vengine block heater and air intake grid heater.

*Optional engine

G.M. 3.0 L EFI dual uel (gasoline / L.P.) rated at59,6 kW (80 bhp) at 2600 rpm.

Operators control station

Frame mounted, open air style control station withcab shell. Includes all crane unctions, driving controls,

and overhead saety glass. Other standard equipmentinclude a durable weather resistant seat with seat belt,hourmeter, sight level bubble, and ire extinguisher.he dash panel includes engine oil pressure gauge,engine water temperature gauge, uel gauge,transmission low oil and high temperature warninglights, low battery warning light, and brake system lowpressure warning light.

*Operators control station enclosed

Includes the standard cab shell with the addition oront, right, and rear glass, a split (two-piece) hingeddoor with sliding glass.

Front windshield wiper and heater and deroster isincluded.

Fuel tank capacity

70 L (18.5 gallon) all steel construction with steel sideplate to guard against side impact.


6/36

6

Speciications

Electrical system

One 12V maintenance ree battery, 820CCA at 0.Jump start connections.

95 amp alternator.

Drive

4 x 2 Front axle drive with planetary hubs and limitedslip dierential.

Steer

YB4409 / XL: two-wheel, our-wheel steerYB4409-2: two-wheel, our-wheel with crab steerYB4411: two-wheel, our-wheel, and crab steer with

electronic sel alignment.

Transmission

YB4409 / XL and YB4409-2: Synchromesh -our-

speeds orward and reverse with stalk mounted

orward/reverse selector.

YB4411: Powershit -our- speeds orward and

reverse. Stalk mounted shiter on let side o steering

column.

Axles

Front: Carraro planetary drive/steer with internalmulti-wet-disc brakes and limited slip dierential.Rear: Fabricated non-drive steer with disc brakes

Tires

10.00 x 15 pneumatic

Brakes

Hydraulic actuated internal wet-disc service brakes

acting on all our wheels. A dash mounted toggle switchactivates the dry disc parking brake on the transmissionoutput yoke with a dash warning light.

Suspension

Front: Rigid mounted to rame.Rear: Rigid mounted to rame.

Lights

Recessed mounted, includes head, tail, rear work,

stop, and turn signals.

Maximum speed

35,6 km/h (22 mph)

Gradeability theoretical

YB4409 / XLand YB4409-2:57%....no load31%.... 5443 kg (12,000 lb) load

YB4411: 68%....no load

40%.... 9072 kg (20,000 lb) load

Gross vehicle weight G.V.W

YB4409: 6849 kg (15,100 lb)YB4409XL: 7512 kg (16,560 lb)YB4409-2: 7734 kg (17,050 lb)YB4411: 7947 kg (17,520 lb)*All weights with enclosed cab

Miscellaneous standard equipment

Single sheave, Quick Reeve style hook block.;YB4409 / XL: 8,0 t (8.5 USt)YB4409-2: 8,1 t (9 USt)YB4411: 10 t (10.5 USt)Back-up alarm



7/36


Dimensions

, m' "

, m' ."

, m' ."

, m' "

, m' ."

, m' ."

, m."

, m

' ."

, m' "

, m' ."

, m' "

, m' ."

, m' ."

, m' ."

, m' ."

, m' "

, m' "

, m' ."

On tires, m ."

, m' "

, m' "

, m' "

, m' ."

, m' "

, m' "

, m' ."

, m' ."

, m' "

YB4409


8/36

8

Turning radius

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

B

Radius

C Radius

A

Radius

D

Radius

E

Radius

YB4409

A B C D E

Twowheel steer 4496 mm

(14 t 9 in)

4737 mm

(15 t 6.5 in)

4636 mm

(15 t 2.5 in)

2718 mm

(8 t 11 in)

5525 mm

(18 t 1.5 in)Fourwheel steer 3048 mm

(10 t 0 in)3645 mm

(11 t 9.5 in)3188 mm

(10 t 5.5 in)1473 mm

(4 t 10 in)3569 mm

(11 t 8.5 in)


9/36


Range diagram


YB4409

SECTION

SECTION

'jib

Booma

ndextensionlengthinfeet

Operating radius in eet rom axis o rotation

Heightfromt

hegroundinfeet


10/36

10

Load chart


YB4409

1) The rated loads are the maximumlit capacities as determined byoperating radius, boom extensionand boom angle. The operatingradius is the horizontal distancerom a projection o the axis orotation to the supporting surace,beore loading, to the center overtical hoist line or tackle with loadapplied.

2) The rated loads shown on outrig-gers do not exceed 85% o actual

tipping. The rated loads shown onrubber do not exceed 75% o actualtipping. These ratings are basedon reely suspended loads with thecrane leveled, standing on a rm,uniorm supporting surace.Practical working loads depend onsupporting surace, operating radiusand other actors aecting stability.Hazardous surroundings, climaticconditions, experience o person-nel and proper training must all betaken into account by the operator.

3) The weights o all load handlingdevices such as hooks, hook blocks,slings, etc., except the hoist rope,shall be considered part o the load.See reduction chart.

NOTES:JIB CAPACITY IS LIMITED BY BOTH STRUCTURALCAPACITY CHART AND MAIN CAPACITY CHART.

SHADED AREAS ARE GOVERNED BY STRUCTURALSTRENGTH, DO NOT RELY ON TIPPING.

OPERATION OF THIS EQUIPMENT IN EXCESS OFRATING CHARTS AND DISREGARD OFINSTRUCTIONS IS DANGEROUS AND VOIDSWARRANTY.

,

ON RUBBER lbON OUTRIGGERS lb

MAINBOOM

JIB

,.

RADIUS

ft

. ,. ,

. ,.

. .

..

..

..

..

,,

,

,,

,

F/R F/R

SECTION BOOM ORSECTION BOOM WITH TH RETRACTED

ON RUBBER lbON OUTRIGGERS lb

.

RADIUS

ft

.

.

.

.

.

.

.

.

.

.

.

.

.

.

F/R F/R

SECTION BOOM WITH TH EXTENDED

*

*

*

*

*

SECTION BOOM

SECTION BOOM

SECTION BOOM OR

WITH TH RETRACTED WITH TH EXTENDED

BOOM

degANGLE

MAIN

JIB STRUCTURAL CAPACITIES lb

* LIMIT RATINGS TO , LB WHEN RD SECTION IS EXTENDED ANY AMOUNT.

4) Ratings on outriggers are oreither outriggers ully extended anddown or ully retracted and down.Ratings or outriggers ullyretracted and down will apply orany intermediate outrigger setting.

5) Ratings on rubber depend ontire capacity, condition o tires andproper infation pressure (100 psi).Loads on rubber may be transportedat a maximum seed o 2.5 mph ona smooth, hard, level surace with

boom retracted to the shortestlength possible and centered overront.

6) For operating radius not shown,use load rating o next larger radius.

7) The maximum combined totalboom and deck load is 12,000 lb. Themaximum deck load only is 14,000lb.

8) Do not induce any external sideloads to boom or jib.

1301286YB

, lbPART

lbPART

RIGGING CHART

FRONT REAR

SIDE

WIRE ROPE: / inch diameter

Min. breaking strength , lb

SIDE

REDUCTION CHART

MAIN BOOMFROM

RATINGSJIB

FROM

RATINGS

MAIN BLOCK

HOOK & BALL

JIB, STOWED

JIB, DEPLOYED

lb

lb

lb

lb

N/A

lb

N/A

lb

*

*

*

*

*


11/36


Dimensions


YB4409XL

, m' "

, m ' " Retracted, m ' ." Extended

, m' ."

, m' "

, cm."

, m' ."

, m."

, m

' ."

, m' "

, m' "

, m' "

, m' ."

, m' "

, m' ."

, m' ."

, m' ."

, m' ."

, m' ."

, m' ."

, m' " On tires

, m' "

, m' "

, m' ."

, m' " , m

' ", m

' ."

, m' ."

, m' "

, m' "


12/36

12

Turning radius


A B C D E

Twowheel steer 5131 mm(16 t 10 in)

4737 mm(15 t 6.5 in)

4636 mm(15 t 2.5 in)

2718 mm(8 t 11 in)

5525 mm(18 t 1.5 in)

Fourwheel steer 3683 mm(12 t 1 in)

3645 mm(11 t 9.5 in)

3188 mm(10 t 5.5 in)

1473 mm(4 t 10 in)

3569 mm(11 t 8.5 in)

C

Radius

A Radius

B Radius

E

RadiusD

Radius

YB4409XL


13/36


Range diagram


Booma

ndextensionlengthin

feet

YB4409XL(Three-section boom)

'JIB

'

"BOOM

'

."

BOOM

'

."B

OOM

'

."B

OOM

WITH

'"JIB


Heightfromt

hegroundinfeet


14/36

14

Range diagram


YB4409XL(Four-section boom)

'JIB

'

"BOOM

'

"BOOM

'"B

OOM

'

"BOOM

'

"BOOM

WITH

'"JIB

Booma



Heightfromt

hegroundinfeet


15/36


Load chart


YB4409XL(Three-section boom)

1) The rated loads are the maximumliting capacities as determinedby operating radius only. Anycombination o boom lengthsand angles may be used to obtainoperating radius. The operatingradius is the horizontal distancerom a projection o the axis orotation to the supporting surace,beore loading, to the center overtical hoist line or tackle with loadapplied.

2) The rated loads shown on

outriggers do not exceed 85% oactual tipping. The rated loadsshown on rubber do not exceed 75%o actual tipping. These ratings arebased on reely suspended loadswith the crane leveled, standing on arm, uniorm, supporting surace.Practical working loads dependon supporting surace., operatingradius, and other actors aectingstability. Hazardous surroundings,climatic conditions, experience opersonnel, and proper training mustall be taken into account by theoperator.

3) The weights o all load handlingdevices such as hooks, hook blocks,slings, etc., except the hoist rope,shall be considered as part o theload. See reduction chart.

NOTES:OPERATE WITH JIB BY RADIUS WHEN MAINBOOM IS FULLY EXTENDED AND BY BOOM ANGLEWHEN MAIN BOOM IS PARTIALLY EXTENDED. DONOT EXCEED JIB CAPACITIES AT ANY PARTIALLYEXTENDED BOOM LENGTH.

SHADED AREAS ARE GOVERNED BY STRUCTURALSTRENGTH. DO NOT RELY ON TIPPING.


Radiusft

SECTION MAIN BOOMON OUTRIGGERS lb

F/R

,,,,

,,,

Radiusft

SECTION MAIN BOOMON RUBBER lb

F/R

,

,

Radiusft

SECTION MAIN BOOM W/ FT JIB DEPLOYED

ON OUTRIGGERS lb

F/R

.

.

..

..

.

ON RUBBER lb

F/R

LOADEDBOOMANGLEdeg

4) Ratings on outriggers are withoutriggers ully extended.

5) Ratings on rubber depend on tirecapacity, condition o tires and properinfation pressure (100 psi). Loads onrubber may be transported at amaximum speed o 2.5 mph on asmooth, hard, level surace with boomretracted to the shortest lengthpossible and centered over ront.

6) For operating radius not shown, useload rating o next larger radius.

7) The maximum combined total boomand deck load is 12,000 lb. Themaximum deck load only is 14,000 lb.


80017680

SIDE

SIDE

REARFRONT

REDUCTION CHART

MAIN BLOCK

HOOK & BALL

JIB, ST OWED

JIB, DEPLOYE D

FROMMAIN BOOM

RATINGS

FROMJIB

RATINGS

lb N/A

lb lb

lb N/A

lb lb

RIGGING CHART

PART lb

PART , lb

WIRE ROPE: / inch diameterMinimum breaking strength , lb


16/36

16

Load chart


,

Radiusft

SECTION MAIN BOOMW/ TH RETRACTED

ON OUTRIGGERS lb

F/R

ON RUBBER lb

F/R

Radiusft

SECTION MAIN BOOMW/ TH EXTENDED

ON OUTRIGGERS lb

F/R

.

ON RUBBER lb

F/R

Radiusft

SECTION MAIN BOOM W/ THRETRACTED W/ FT JIB DEPLOYED

ON OUTRIGGERS lb

F/R

.

.

..

..

.

ON RUBBER lb

F/R

LOADEDBOOMANGLEdeg

Radiusft

SECTION MAIN BOOM W/ THEXTENDED W/ FT JIB DEPLOYED

ON OUTRIGGERS lb

F/R

.

.

.

..

ON RUBBER lb

F/R

LOADEDBOOMANGLEdeg

YB4409XL(Four-section boom)

1) The rated loads are the maximumliting capacities as determined byoperating radius only. Any combinationo boom lengths and angles may beused to obtain operating radius. Theoperating radius is the horizontaldistance rom a projection o the axiso rotation to the supporting surace,beore loading, to the center o verticalhoist line or tackle with load applied.

2) The rated loads shown on outriggersdo not exceed 85% o actual tipping.

The rated loads shown on rubber donot exceed 75% o actual tipping. Theseratings are based on reely suspendedloads with the crane leveled, standingon a rm, uniorm, supporting surace.Practical working loads depend onsupporting surace, operating radius,and other actors aecting stability.Hazardous surroundings, climaticconditions, experience o personnel, andproper training must all be taken intoaccount by the operator.

NOTES:OPERATE WITH JIB BY RADIUS WHEN MAINBOOM IS FULLY EXTENDED (WITH 4TH SECTIONEXTENDED OR RETRACTED) AND BY BOOMANGLE WHEN MAIN BOOM IS PARTIALLYEXTENDED. DO NOT EXCEED JIB CAPACITIES ATANY PARTIALLY EXTENDED BOOM LENGTH.

SHADED AREAS ARE GOVERNED BY STRUCTURALSTRENGTH. DO NOT RELY ON TIPPING.

OPERATION OF THIS EQUIPMENT INEXCESS OF RATING CHARTS ANDDISREGARD OF INSTRUCTIONS ISDANGEROUS AND VOIDS WARRANTY.

3) The weights o all load handling devicessuch as hooks, hook blocks, slings, etc.,except the hoist rope, shall be consideredas part o the load. See reduction chart.


5) Ratings on rubber depend on tirecapacity, condition o tires and properinfation pressure (100 psi). Loads onrubber may be transported at a maximumspeed o

2.5 mph on a smooth, hard, level suracewith boom retracted to the shortestlength possible and centered over ront.


7) The maximum combined total boom anddeck load is 12,000 lb. The maximum deckload only is 14,000 lb.

8) Do not induce any external side loads toboom or jib.

80017732

SIDE

SIDE

REARFRONT

REDUCTION CHART

MAIN BLOCK

HOOK & BALL

JIB, S TOWED

JIB, DEPL OYED

FROMMAIN BOOM

RATINGS

FROMJIB

RATINGS

lb N/A

lb lb

lb N/A

lb lb

RIGGING CHART

PART lb

PART lb

WIRE ROPE: / inch diameterMinimum breaking strength , lb


17/36


Dimensions


Retracted , m & Extended , mRetracted & Extended

m.

, m

, m , m

, m

, cm.

*, m.

, m.

, m.

* boom headposition can onlybe used with adown haul block

Dimensions are with boom horizontaland the antitwo block bottomed.

See Insert

Dimensions are withboom horizontaland the antitwoblock bottomed.

, m .

, m .

. m .

, m

, m .

, m .

, m .

, m .

, m .

, m .

, m

, m .

, m .

, m

, m

, m .

, m

, m

YB4409-2


18/36

18

Turning radius


A B C D E

Twowheel steer 4674 mm(14 t 4 in)

4737 mm(15 t 6.5 in)

4636 mm(15 t 2.5 in)

2718 mm(8 t 11 in)

5525 mm(18 t 1.5 in)

Fourwheel steer 4267 mm(14 t 0 in)

3645 mm(11 t 9.5 in)

3188 mm(10 t 5.5 in)

1473 mm(4 t 10 in)

3569 mm(11 t 8.5 in)

B

Radius

C

Radius

A

Radius

D

Radius

E

Radius

YB4409-2


19/36


Range diagram


YB4409-2

' Jib ' Jib

boom, m ' "

boom, m ' "

boom, m ' "

with , m ', m ' " boom

osettable boom extension

with , m ' to , m ', m ' " boom

telescopic osettableboom extension

Booma



Heightfromt

hegroundinfe

et


20/36

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.20

Load chart

YB4409-2

1) The rated loads are the maximumliting capacities as determinedby operating radius only. Anycombination o boom lengthsand angles may be used to obtainoperating radius. The operatingradius is the horizontal distancerom a projection o the axis orotation to the supporting surace,

beore loading, to the center overtical hoist line or tackle with loadapplied.

2) The rated loads shown onoutriggers do not exceed 85% oactual tipping. The rated loadsshown on rubber do not exceed 75%o actual tipping. These ratings arebased on reely suspended loadswith the crane leveled, standing on arm, uniorm, supporting surace.Practical working loads dependon supporting surace., operatingradius, and other actors aecting

stability. Hazardous surroundings,climatic conditions, experience opersonnel, and proper training mustall be taken into account by theoperator.



5) Ratings on rubber depend on tirecapacity, condition o tires and properinfation pressure (100 psi). Loads onrubber may be transported at amaximum speed o 2.5 mph on asmooth, hard, level surace with boom

retracted to the shortest lengthpossible and centered over ront.




1303154YB



OPERATION OF THIS EQUIPMENT IN EXCESS OFRATING CHARTS AND DISREGARD OF

INSTRUCTIONS IS DANGEROUS AND VOIDSWARRANTY.

F/R

ON OUTRIGGERS lb ON RUBBERlb

F/R RADIUSft

BOOMRETRACTED

BOOMEXTENDED

ANYBOOM

BOOMRETRACTED

BOOMEXTENDED

ANYBOOM

MAINBOOM

JIB

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,


ft JIB ft JIB

OFFSET

OFFSET

OFFSET

MAINBOOMANGLEdeg

OFFSET

OFFSET

OFFSET

SIDE

REAR

SIDE

FRONT

REDUCTION CHART

MAIN BLOCK

HOOK & BALL

JIB, STOWED

JIB, DEPLOYED

FROMMAIN BOOM

RATINGS

FROMMAIN JIBRATINGS

lb

lb

lb

lb lb

lb

N/A

N/A

RIGGING CHART

PART , lb

PART , lb

WIRE ROPE: / in diameterMin. breaking strength , lb


21/36


Dimensions


YB4411

, m' ." , m

' ."

Retracted , m '" and Extended , m ' "

See Inset

, m' ."

mm"

mm."

Main blocktwopart line

Hook and ballonepart line

mm."

mm"

mm"

mm"

, m' ."

, m' .", m

' .", m

' ." , m' "

, m' ."

, m' ."

, m' "

, m' ."

, m' ."

, m' ."

, m' ."

, m ' ."Track Width

, m ' ."Frame Width

, m ' ."Max. Machine Width

, m ' ."C.L.O.R. Ret. and Down

, m ' ."C.L.O.R. Ext. and Down

*, m.

, m.

, m.

* boom headposition can onlybe used with adown haul block

Dimensions are with boom horizontaland the antitwo block bottomed.

Dimensions are withboom horizontaland the antitwoblock bottomed.


22/36


Turning radius

A B C D E

Twowheel steer 4759 mm(15 t 7.4 in)

4482 mm(14 t 8.4 in)

4080 mm(13 t 4.6 in)

2556 mm(8 t 4.6 in)

4522 mm(14 t 10.0 in)

Fourwheel steer 3990 mm(13 t 1.1 in)

3346 mm(10 t 11.7 in)

2853 mm(9 t 4.3 in)

1470 mm(4 t 9.9 in)

3416 mm(11 t 2.5 in)

YB4411

COutside turning radius

DInside turning radius

E

B

A


23/36

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.Grove YB4400 Series 23

Range diagram

'

"B

OOM

'

"BOOM

'

"BO

OM

'

"B

OOM

'

"B

OOM

WITH

'

"JIB

WITH

'

"JIB

&'

"S

TINGER

YB4411

Booma



Heightfromt

hegroundinfeet


24/36


Load chart

24

YB4411

1) The rated loads are the maximumliting capacities as determined byoperating radius, boom extensionand boom angle. The operatingradius is the horizontal distancerom a projection o the axis orotation to the supporting surace,

beore loading to the center overtical hoist line or tackle with loadapplied.

2) The rated loads shown on outrig-gers do not exceed 85% o actualtipping. The rated loads shown onrubber do not exceed 75% o actualtipping. Retracted outrigger ratedloads meet ASME B30.5-2004. Theseratings are based on reelysuspended loads with the craneleveled, standing on a rm, uniorm,supporting surace. Practicalworking loads depend on supporting

surace, operating radius, and otheractors aecting stability. Hazardoussurroundings, climatic conditions,experience o personnel, and propertraining must all be taken intoaccount by the operator.


4) Ratings on outriggers are or eitheroutriggers ully extended and down orully retracted and down. Ratings oroutriggers ully retracted and downwill apply or any intermediateoutrigger setting.

5) Ratings on rubber depend on tirecapacity, condition o tires and properinfation pressure (125 psi). Loads onrubber may be transported at amaximum speed o 2.5 mph on asmooth, hard level surace with boomretracted to the shortest lengthpossible and centered over ront.




80016879




.

BOOM

ON OUTRIGGERS lb

MAINBOOM

JIB

BOOM

degANGLE

MAINRADIUS

ft

RETRACTED

..............

....

....

ON RUBBER lb

F/R

RETRACTED F/REXTENDED

EXTENDEDBOOM

RETRACTED ft JIB

OFFSET

OFFSET

OFFSET

OFFSET

OFFSET

OFFSET

ft JIB


EXTENDEDBOOM

RETRACTED

BOOM ANYBOOM

ANYBOOM

,,,,,

,,,,,

,

,

, ,,,

,,,,

FRONT REAR

SIDE

SIDE

, lbPART

, lbPART

RIGGING CHART

WIRE ROPE: / inch diameterMin. breaking strength , lb

REDUCTION CHART

MAIN BOOMFROM

RATINGSJIB

FROM

RATINGS

MAIN BLOCK

HOOK & BALL

JIB, STOWED

JIB,DEPLOYED

lb

lb

lb

lb

N/A

lbs

N/A

lb


25/36


DIN/ISO range diagram

,

,

,

,

,

SECTION

SECTION

,

,

,

, , , , , , , , ,

,mJ

IB

, , , , , , , , ,

,

,

,

,

,

,

,

,

YB4409

Operating radius in meters rom axis o rotation

Booma

ndextensionlengthinmeters

Heightfromt

hegroundinmeters


26/36


DIN/ISO load chart

YB4409

1) The rated loads are the maximumliting capacities as determinedby operating radius only. Anycombination o boom lengthsand angles may be used to obtainoperating radius. The operatingradius is the horizontal distancerom a projection o the axis orotation to the supporting surace,beore loading, to the center overtical hoist line or tackle with loadapplied.

2) The rated loads shown on outrig-gers do not exceed 80% o actual

tipping. The rated loads shown onrubber do not exceed 75% o actualtipping. These ratings are basedon reely suspended loads with thecrane leveled, standing on a rm,uniorm, supporting surace.Practical working loads dependon supporting surace, operatingradius, and other actors aectingstability. Hazardous surroundings,climaticconditions, experience ooperator, and proper training mustall be taken into account by theoperator.



5) Ratings on rubber depend on tirecapacity, condition o tires and properinfation pressure (6,9 bar). Loads onrubber may be transported at amaximum speed o 4 km/h on asmooth, hard, level surace with boomretracted to the shortest lengthpossible and centered over ront.


7) The maximum combined total boomand deck load is 5440 kg. Themaximum deck load only is 6350 kg.


1302492YB




*LIMIT RATINGS TO kg WHEN RD SECTION IS EXTENDED ANY AMOUNT.

ON RUBBER kgON OUTRIGGERS kg

MAINBOOM

JIB

,

RADIUSm

,

,

,

,

,

,

,

,

,

,

,

,

,

,

F/R F/R



RADIUSm

F/R F/R


BOOM

degANGLE

MAIN

SECTION BOOM

SECTION BOOM

JIB STRUCTURAL CAPACITIES kg

SECTION BOOM OR

WITH TH RETRACTEDWITH TH EXTENDED

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

:

. ,

,

,

radi us.

rotati on

vertical

on

exceed

kgPART

kgPART

RIGGING CHART

WIRE ROPE: mm diameter

Min. breaking strength , kN

REDUCTION CHART

MAIN BOOMFROM

RATINGSJIB

FROM

RATINGS

MAIN BLOCK

HOOK & BALL

JIB, STOWED

JIB, DEPLOYED

kg

kg

kg

kg

N/A

kg

N/A

kg

FRONT REAR

SIDE

SIDE

radius.

rotati on

ver tical

on

exceed


27/36



YB4409XL

,

,

,

,

,

,

,

,

SECTION

SECTION

, ,, ,, ,

,

,

,

,

,

,

,mJ

IB

,

,, , , ,, ,, , , ,

,

,

,

,

,

,

,

,

,

,


Booma


Heightfromt

hegroundinmeters


28/36


DIN/ISO load chart

YB4409XL

1) The rated loads are the maximumliting capacities as determinedby operating radius only. Anycombination o boom lengthsand angles may be used to obtainoperating radius. The operatingradius is the horizontal distancerom a projection o the axis orotation to the supporting surace,beore loading, to the center overtical hoist line or tackle with load

applied.

2) The rated loads shown onoutriggers do not exceed 80% oactual tipping. The rated loadsshown on rubber do not exceed 75%o actual tipping. These ratings arebased on reely suspended loadswith the crane leveled, standing ona rm, uniorm, supporting surace.Practical working loads dependon supporting surace, operatingradius, and other actors aectingstability. Hazardous surroundings,climatic conditions, experience o

operator, and proper training mustall be taken into account by theoperator.



5) Ratings on rubber depend on tirecapacity, condition o tires and properinfation pressure (6,9 bar). Loads onrubber may be transported at amaximum speed o 4 km/h on asmooth, hard, level surace with boomretracted to the shortest lengthpossible and centered over ront.




1302119YB




MAINBOOM

JIB

F/R F/R



,

RADIUSm

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

F/R F/R

,


BOOM

degANGLE

MAIN

SECTION BOOM

SECTION BOOM


SECTION BOOM OR

WITH TH RETRACTED WITH TH EXTENDED


,

RADIUSm

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

kgPART

kgPART

RIGGING CHART



REDUCTION CHART

MAIN BOOMFROM

RATINGSJIB

FROM

RATINGS

MAIN BLOCK

HOOK & BALL

JIB, STOWED

JIB, DEPLOYED

kg

kg

kg

kg

N/A

kg

N/A

kg

FRONT REAR

SIDE

SIDE


29/36



YB4409-2

, , , , , , , , , , , , , , , , , , , , , , , , , , , ,

, , , , , , , , , , , , , , , , , , . , , , , , , , , ,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

, m JIB , m JIB


Booma


Heightfromt

hegroundinme

ters



30/36

30

DIN/ISO load chart

YB4409-2



OPERATION OF THIS EQUIPMENT IN EXCESS OF

RATING CHARTS AND DISREGARD OFINSTRUCTIONS IS DANGEROUS AND VOIDSWARRANTY.

1) The rated loads are the maximumliting capacities as determined byoperating radius, boom extensionand boom angle. The operatingradius is the horizontal distancerom a projection o the axis orotation to the supporting surace,beore loading to the center o

vertical hoist line or tackle with loadapplied.

2) The rated loads shown on outrig-gers do not exceed 80% o actualtipping. The rated loads shown onrubber do not exceed 75% o actualtipping. These ratings are basedon reely suspended loads with thecrane leveled, standing on a rm,uniorm, supporting surace.Practical working loads dependon supporting surace, operatingradius, and other actors aectingstability. Hazardous surroundings,climatic conditions, experience o

personnel, and proper training mustall be taken into account by theoperator.


4) Ratings on outriggers are oroutriggers ully extended.

5) Ratings on rubber depend on tirecapacity, condition o tires and properinfation pressure (700 kPA). Loads onrubber may be transported at amaximum speed o 1,4 km/h on a

smooth, hard level surace with boomretracted to the shortest lengthpossible and centered over ront.




80019958

BOOM

degANGLE

MAIN, m JIB

OFFSET

OFFSET

OFFSET

OFFSET

OFFSET

OFFSET

, m JIB


BOOM

ON OUTRIGGERS kg

MAINBOOM

JIB

RADIUSm

RETRACTED

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,,

,

,

,

,

,

ON RUBBER kg

F/R

EXTENDEDBOOM

EXTENDEDBOOM

RETRACTEDBOOM ANY

BOOMANY

BOOM

F/R

kgPART

kgPART

RIGGING CHART



REDUCTION CHART

MAIN BOOMFROM

RATINGSJIB

FROM

RATINGS

MAIN BLOCK

HOOK & BALL

JIB, STOWED

JIB, DEPLOYED

kg

kg

kg

kg

N/A

kg

N/A

kg

FRONT REAR

SIDE

SIDE



31/36



YB4411

,mBO

OM

,mBO

OM

,

mBO

OM

,mBO

OM

,mBO

OM

WITH

,mJIB

WITH

,mJIB

&,

mSTIN

GER


Booma


Heightfromt

hegroundinmeters



32/36

32

DIN/ISO load chart

YB4411

1) The rated loads are the maximumliting capacities as determinedby operating radius only. Anycombination o boom lengthsand angles may be used to obtainoperating radius. The operatingradius is the horizontal distance

rom a projection o the axis orotation to the supporting surace,beore loading, to the center overtical hoist line or tackle with loadapplied.

2) The rated loads shown on outrig-gers do not exceed 80% o actualtipping. The rated loads shown onrubber do not exceed 75% o actualtipping. These ratings are basedon reely suspended loads with thecrane leveled, standing on a rm,uniorm, supporting surace. Practi-cal working loads depend on sup-

porting surace, operating radius,and other actors aecting stability.Hazardous surroundings, climaticconditions, experience ooperator, and proper training mustall be taken into account by theoperator.



5) Ratings on rubber depend on tirecapacity, condition o tires and properinfation pressure (6,9 bar). Loads onrubber may be transported at a

maximum speed o 4 km/h on asmooth, hard level surace with boomretracted to the shortest lengthpossible and centered over ront.




1302120YB




:

. ,

,

,

,

BOOM

ON OUTRIGGERS kg

MAINBOOM

JIB

BOOM

deg

ANGLE

MAINRADIUS

m

RETRACTED

,

,

,

,

,

,

,

,

,

,

,

,

,

,,,

,

,

,

,

,

,

ON RUBBER kg

F/R

RETRACTED F/R

EXTENDED

EXTENDEDBOOM

RETRACTED , m JIB

OFFSET

OFFSET

OFFSET

OFFSET

OFFSET

OFFSET

, m JIB


EXTENDEDBOOM

RETRACTEDBOOM ANY

BOOMANY

BOOM

kgPART

kgPART

RIGGING CHART



REDUCTION CHART

MAIN BOOMFROM

RATINGSJIB

FROM

RATINGS

MAIN BLOCK

HOOK & BALL

JIB, STOWED

JIB, DEPLOYED

kg

kg

kg

kg

N/A

kg

N/A

kg

FRONT REAR

SIDE

SIDE



33/36


Symbols glossary

Drive

RotationElectrical system

Suspension

Fuel tank capacity

Tires

Engine

Brakes

Outrigger controls

Axles Outriggers

Transmission

Frame

Steering

Lights

Boom elevation

Cab

Swing

Hydraulic system

Hoist

Boom nose

Radius

Boom extension

Boom length

Grade

Gear

Boom

Counterweight

Speed

Oil

Extension

HookblockH

Heavy duty jib


34/36

34

Notes


35/36


Notes


36/36

Tis document is non-contractual. Constant improvement and engineering progress

make it necessary that we reserve the right to make specifcation, equipment, and price

changes without notice. Illustrations shown may include optional equipment and

accessories and may not include all standard equipment.

Regional oces

ChinaShanghai, ChinaTel: +86 21 6457 0066Fax: +86 21 6457 4955

Greater Asia-PacifcSingaporeTel: +65 6264 1188Fax: +65 6862 4040

Europe, Middle East, AricaEcully, FranceTel: +33 (0)4 72 18 20 20Fax: +33 (0)4 72 18 20 00

AmericasManitowoc, Wisconsin, USATel: +1 920 684 6621Fax: +1 920 683 6277

Shady Grove, Pennsylvania, USATel: +1 717 597 8121Fax: +1 717 597 4062

Regional headquarters

Manitowoc Cranes

ChinaBeijingChengduGuangzhouXian

Greater Asia-PacifcAustraliaAdelaideBrisbaneMelbourne

SydneyIndiaCalcuttaChennaiDelhiHyderabadPuneKoreaSeoulPhilippinesMakati CitySingapore

FactoriesBrazilAlphavilleChinaTaiAnZhangjiagangFranceCharlieuMoulinsGermanyWilhelmshavenIndiaPuneItalyNiella TanaroPortugalBaltarFnzeresSlovakiaSarisUSAManitowocPort WashingtonShady Grove

AmericasBrazilAlphavilleMexicoMonterreyChileSantiago

Europe, Middle East,AricaCzech Republic

NetvoriceFranceBaudemontCergyDecinesGermanyLangeneldHungaryBudapestItalyLainateNetherlandsBredaPolandWarsawPortugal

BaltarRussiaMoscowU.A.E.DubaiU.K.Buckingham

YB4400 Product Guide Imperial DINISO

Documents

Transcript of YB4400 Product Guide Imperial DINISO