Wt5912 unit0 week1

WT5912TECHNOLOGY EDUCATION & WORKSHOP PRACTICE 2: MATERIALS AND CONSTRUCTIONUnit 0 – Week 1: Construction Studies and Health & SafetyDepartment of Design & Manufacturing TechnologyLecturer/Teacher: Mr. Joseph Lyster Academic Year 2011: Spring SemesterTechnical Support: Mr. Joe Murray & Mr. Richie Hennessy Lecture Notes: www.slideshare.net/WT4603 P1004 – 28/01/2011 12-1pm

http://www.slideshare.net/WT4603

Students will be introduced to the Construction related syllabi at senior cycle level and develop strategies to teach their concepts and content. Students will draw on their knowledge base from their primary degree and content of this module to formulate a coherent approach to teaching construction based subjects at second level.

In addition to the Construction syllabi students will be involved in extensive laboratory work to ensure the competent and effective implementation of wood processing safety and practice in second level technology education settings. This is a core issue regarding the management of the classroom environment for health and safety of all and the nature of work being conducted.

Introduction:

Department of Design & Manufacturing Technology

WT5912

Lecturer: Joseph Lyster Teaching Assistant: Joseph Lyster Senior Technicians: Joseph Murray, Richard Hennessy & Louise Madden Lab Groups: 2A Courses Involved: Grad. Dip. In Technology Education Lecture Times: Friday 12-1pm in P1004 (PESS Building)....Be on time!!! Lab Times: Monday 4-6pm/Tuesday 3-6pm Lecture Notes: Available @ www.slideshare.net/WT4603

Introduction:


WT5912

http://www.slideshare.net/WT4603

Introduction:Aim & Objectives…The overall aim of this module is to prepare you for the role of teaching, learning and assessment of second level leaving certificate Construction Studies.

Affective Domain: To motivate and foster your moral development as a teacher of Construction Studies with emphasis on critical pedagogy and practice, i.e. health & safety, through the integration of previous knowledge and methods of reflective inquiryCognitive Domain: To draw on the learning obtained from your pervious qualifications to support the development of your knowledge, comprehension and application of both theoretical and practical elements of Constructions StudiesPsychomotor Domain:To foster your ability to plan, develop and demonstrate practical processes and techniques through organised teaching and learning activities in the Construction Studies setting


WT5912

60% Laboratory Work (LW) 20% Written Exam (WE) 20% Term Assignments (TA) Machines Practical Exam (Pass / Fail Basis) Lab Book (Pass / Fail Basis) Note:

Students must pass all assessment elements to obtain a pass in the module. Students that fail the practical machines exam and repeat exam will

automatically fail the entire module.

Nature of Project work: Refer to outline, as given, for specific project details.

Introduction:Assessment…


WT5912

Construction Studies


WT5912

Construction Studies:Details: Construction Studies (C.S.) was established in 1984 and was first

introduced to vocational schools It is a second level senior cycle subject and a follow on subject from

junior certificate Materials Technology Wood (MTW) It is part of the ‘established leaving certificate’ programme The subject is optional, meaning students can choose to study it if they

wish. It is offered in most schools but not all. It offers a broad range of learning involving both theory and practical. In terms of its assessment, it is offered at both ordinary and higher level The uptake in C.S. has continued despite the collapse of the Irish

Construction sector/Industry. This can be largely attributed to the learning experience on offer and the

respect for teachers of C.S.


WT5912

Construction Studies:The aims & Objectives…


WT5912

Construction Studies:The Assessment…


WT5912

Construction Studies:The Theory…

Theory/Drawings: General – Planning, sustainable development, health and safety etc… Substructure – Foundation types, rising walls, floors, radon, DPC, provision etc… Superstructure – External Walls, windows, doors, roofs, dormers, chimneys, etc… Internal Construction – Internal walls, floors, partitions, second fixings, doors, etc… Services and External Works – Mechanical services, electricity, wastewater treatment,

sewage, etc… Heat and Thermal Effects In Buildings – Construction type, Insulation, material

conductivity, air tightness etc… Illumination In Buildings – Natural Light, glazing, LUX, heat transfer, dwelling orientation

etc… Sound In Buildings – Insulation etc…


WT5912

Construction Studies:The Practical…

Practical: Tools

Maintenance and care of tools Uses, construction and mechanical principles Health & Safety

Processes Construction of joint types used in partitions, floors, stairs, roof,

structural timbers, doors, window frames, box and carcase construction.

Laminating board material Correct use of manufactured board Storage of materials, knowing properties of wood. Ability to effectively plan a cutting list, use of jigs clamps etc…


WT5912

Construction Studies:Coursework & Projects…

Coursework

Projects


WT5912

Construction Studies:Coursework & Projects…


WT5912

Construction Studies:Current Trends…Current Trends: Though the theoretical areas/principles of the subject remain the same there has been a

significant change in the process of building. This is currently being assessed in the leaving certificate exam, which is set by the State

Examinations Commission (SEC). The subject has engendered a strong theme for economic, social and environmental

building performance, i.e. sustainability. These features are being integrated into the examination phase through elements such

as updated building regulations, building energy rating (BER), passive housing, sustainable planning and development.

A few years ago the subject was to receive a formal update including a revised syllabus and new name –Architectural Technology.

However, the current economic climate and the issue of funds to support the broader range of development in the technologies has resulted in this plan being shelved until a future date.


WT5912

HEALTH & SAFETY


WT5912

• Section 8(2)e of the 2005 Act states that it is the duty of every employer“to provide systems of work that are planned, organised, performed and maintained so as to be, so far as is reasonably practicable, safe and without risk to health.”

• Health and safety management is a practical and systematic approach to identifying hazards and evaluating the extent of associated risk

Health & Safety Management


WT5912


WT5912

Can be identified by:▫High accident/injury rates.▫Poor machinery guarding.▫Poor cleaning and housekeeping arrangements.▫Limited interest of OHS by employers/management.▫Lack of care/respect for safety rules.▫Poor safety culture.

Unsafe Workplaces


WT5912

Can be identified by:

•Regular inspection of workplace•Consultation between employer and employees.•Clearly defined structure of responsibilities….•Employees are trained…•Exceeds the specific requirements of the law –

manages safety not for fear of being reprimanded but for the employees.

Safe Workplaces


WT5912

The Key steps of any Health & Safety Management scheme are:

1. Policy2. Hazard identification3. Risk Assessment4. Control Measures.5. Recording Findings (Safety Statement)6. Monitoring, Review and Auditing

Safety Management


WT5912

Required Reading


WT5912

The Safety Management Process


WT5912

Health & Safety Policy


WT5912

More information can be found byconsulting manufacturer’s manual


WT5912

Health & Safety at Work Act 2005

Pg. 30 of Health & Safety at Work Act

2005


WT5912

Identify Hazards (Hazard Identification)


WT5912


WT5912

Common Machinery/Mechanical Hazards


WT5912

Wrap Point: (Entanglement)


WT5912

Shear Point and Cutting Hazards


WT5912

Crush Points


WT5912

Ejection Hazards


WT5912

Other Hazards


WT5912

Hazards


WT5912

• You will need to develop a template for your lesson risk assessment.• Strategies will need to be developed to:

Reduce or eliminate risk Demonstrate safe use of machine(s) Teach key learning points relating to machine or process Assess and record pupil learning and competence Ensure adequate supervision of activities

Classroom Risk Assessment:


WT5912

Room Layout


WT5912

Assess Risk (Risk Assessment)


WT5912


WT5912

Risk Magnitude


WT5912

Risk Assessment


WT5912

• Hazard • means anything that can cause harm (eg

chemicals, electricity, working from ladders, etc)

• Risk • is the chance, high or low, that

somebody will be harmed by the hazard.

Difference Between A Hazard & Risk


WT5912

A. Eliminate the Hazard Completely.B. Substitute Hazard with a safer alternative.C. Isolate the Hazard.D. Use engineering controls to reduce risk at the source

(Guarding).E. Provide training on how to avoid risks.& if all that fails…F. Use PPE.

Hierarchy of Risk Control


WT5912

Importance of being able to Assess Risk


WT5912

•Exposure to hazard

▫Very Infrequent (< once per annum or less)▫Quite Infrequent (annually/biannually)▫Frequent (quarterly/monthly)▫Quite Frequent (weekly/daily)▫Highly Frequent (continuous daily)

Risk Assessment Considerations


WT5912

•Likelihood▫Highly Unlikely (practically impossible)▫Quite Unlikely (conceivable but very unlikely)▫Likely (conceivable and could possibly happen)▫Quite Likely (almost certain to happen)▫Highly Likely (certain to happen)



WT5912

• Consequences

▫Minor Injury/Ill Health ( minor cuts, abrasions etc.)▫ Injury/Ill Health (burns, sprains, minor fractures etc.)▫Serious Injury/Ill Health (breaks, deafness etc.)▫Major Injury/Ill Health (amputations, cancer, multiple breaks

etc.)▫Fatality (one or more fatalities)



WT5912

▫Knowledge▫Skills▫Training▫Experience▫Attitude

▫Motivation▫Risk perception▫Mental condition▫Physical condition▫Accident proneness

Factors Effecting Likelihood & OccurrenceIndividual Factors


WT5912

▫Condition of equipment/tools

▫Maintenance regime▫Guarding/hazard

controls▫Workload▫Patterns of work

▫Emergency arrangements

▫Training/ information/ instruction

▫Supervision▫Communications▫PPE

Task factorsFactors Effecting Likelihood & Occurrence


WT5912


WT5912

Factors Effecting Likelihood of Occurrence


WT5912


WT5912


WT5912

Risk Magnitude Matrix


WT5912


WT5912


WT5912

Which Poses the Greatest Risk?


WT5912


WT5912

Risk Magnitude Matrix


WT5912


WT5912

RISK ASSESSMENTLocation: SR2-047 Date: 24-09-2010 Assessment Carried out by: Mr. Joe Lyster

Assessment of: PILLAR DRILL CE Marking (Machines): Yes □ No □

Page 1 of 1 Assessment Review Date: 24-09-2010

HAZARD RISK MAGNITUDE PERSONS AT RISK EXISTING CONTROLS REQUIRED CONTROLS PERSONS RESPONSIBLE TARGET DATE


WT5912


Assessment of: PILLAR DRILL CE Marking (Machines): Yes □ No □



1. Entanglement

2. Violent Ejection

3. Piece Spinning

4. Electric Shock Hazards

5. Cuts

6. Inadvertent Starting

7. Space around Machine

8. Tripping/Slipping

9. Pinch Point

10. Falling Table

11. Noise Levels

12. Crushing


WT5912

1. ENTANGLEMENTSEVERITY

Slightly Harmful

Moderately Harmful

Quite Harmful

Very Harmful

Extremely Harmful

LIKELIHOO

D

Highly Unlikely Trivial Tolerable Tolerable Moderate Moderate

Quiet Unlikely Tolerable Tolerable Moderate Moderate Substantial

Likely Tolerable Moderate Moderate Substantial Substantial

Quite Likely Moderate Moderate Substantial Substantial Intolerable

Highly Likely Moderate Substantial Substantial Intolerable Intolerable


WT5912

2. VIOLENT EJECTIONSEVERITY

Slightly Harmful

Moderately Harmful

Quite Harmful

Very Harmful

Extremely Harmful

LIKELIHOO

D







WT5912

3. PIECE SPINNINGSEVERITY

Slightly Harmful

Moderately Harmful

Quite Harmful

Very Harmful

Extremely Harmful

LIKELIHOO

D







WT5912

4. ELECTRIC SHOCKSEVERITY

Slightly Harmful

Moderately Harmful

Quite Harmful

Very Harmful

Extremely Harmful

LIKELIHOO

D







WT5912

5. CUTSSEVERITY

Slightly Harmful

Moderately Harmful

Quite Harmful

Very Harmful

Extremely Harmful

LIKELIHOO

D







WT5912

6. INADVERTENT STARTING

SEVERITYSlightly Harmful

Moderately Harmful

Quite Harmful

Very Harmful

Extremely Harmful

LIKELIHOO

D







WT5912

7. SPACE AROUND MACHINE

SEVERITYSlightly Harmful

Moderately Harmful

Quite Harmful

Very Harmful

Extremely Harmful

LIKELIHOO

D







WT5912

8. TRIPPING/SLIPPINGSEVERITY

Slightly Harmful

Moderately Harmful

Quite Harmful

Very Harmful

Extremely Harmful

LIKELIHOO

D







WT5912

9. PINCH POINTSEVERITY

Slightly Harmful

Moderately Harmful

Quite Harmful

Very Harmful

Extremely Harmful

LIKELIHOO

D







WT5912

10. FALLING TABLESEVERITY

Slightly Harmful

Moderately Harmful

Quite Harmful

Very Harmful

Extremely Harmful

LIKELIHOO

D







WT5912

11. NOISE LEVELSSEVERITY

Slightly Harmful

Moderately Harmful

Quite Harmful

Very Harmful

Extremely Harmful

LIKELIHOO

D







WT5912

12. CrushingSEVERITY

Slightly Harmful

Moderately Harmful

Quite Harmful

Very Harmful

Extremely Harmful

LIKELIHOO

D







WT5912


WT5912


Assessment of: PILLAR DRILL CE Marking (Machines): Yes No □□̷�



1. Entanglement Intolerable User of Machine Securing Clothes/Hair Chuck Guard Teacher/Students 24-09-2010

2. Violent Ejection Moderate All in Class Spring Loaded Chuck Chuck Guard Teacher/Students 24-09-2010

3. Piece Spinning Moderate All in Vicinity Clamp Correct Clamping Teacher/Students 24-09-2010

4. Electric Shock Hazards Moderate User of Machine Inspection of

EquipmentRegular Inspection of electrical components

Teacher/Students 24-09-2010

5. CutsModerate User of Machine Training

Exclusion zones marked clearly in

relation to work areaTeacher/Students 24-09-2010

6. Inadvertent Starting Moderate All in Vicinity Lockable Isolator

SwitchLock isolator in the off position when not in

useTeacher/Students 24-09-2010

7. Space around Machine Substantial User of Machine Nothing

Safe work area exclusion zone marked

around machineTeacher/Students 24-09-2010

8. Tripping/Slipping Moderate User of Machine Nothing Sign posts Teacher/Students 24-09-2010

9. Pinch Point Substantial User of Machine Nothing Chuck Guard Teacher/Students 24-09-2010

10. Falling Table Moderate User of Machine Pillar Post Lock Handle Correct Locking/Clamp Teacher/Students 24-09-2010

11. Noise Levels Trivial All in Class Nothing PPE & Sign posts Teacher/Students 24-09-2010

12. Crushing Intolerable All in Vicinity Nothing Secure Fixing Teacher/Students 24-09-2010


WT5912

CLASSROOM MANAGEMENT:

Health & Safety…


WT5912

• Students should only work in a high risk area when it is fully under the control of a person competent to work in and supervise that area.

• Close monitoring of students using machinery.• Students must not be permitted to use equipment while

unsupervised.• It is the responsibility of the schools to ensure that the

machines are not accessible to unauthorised persons▫Cleaners▫Visitors▫Unsupervised students.

Supervision & Access


WT5912

Supervision & Access


WT5912

• An assessment of each workshop should be carried out in order to determine the safe operational area around each machine.

• Hard wearing and clearly visible markings should be set down on the floor to indicate these safe operation areas.

• If necessary, machines should be moved to accommodate this safe operational area.

Exclusion Zones


WT5912

Emergency Isolators and Emergency Stops


WT5912

Start/Stop• Are there appropriate start / stop controls ?• Location• Colour• Flush mounted• Mushroom head

▫ Turn release▫ Key release


WT5912

Stop control must have priority over the Start control.

Start Control Flush Recessed

Stop Control Mushroom Head Push Bar

Start/Stop


WT5912

Some machines may have two stopping devices.

Hand Operated

Foot/Knee Operated

Emergency Stop


WT5912

Material Preparation


WT5912

Machine guards must:▫ Be of robust construction.▫ Not give rise to any additional hazard.▫ Not be easily removed or rendered inoperative.

(Removed with the use of a tool)▫ Be situated a sufficient distance from the danger zone.▫ Not restrict more than necessary the view of the operating cycle of the

equipment

Guarding


WT5912

Lighting


WT5912

Push Sticks


WT5912

Maintenance of Machinery


WT5912

Preventative Maintenance


WT5912

Maintenance Records


WT5912

Inspection of Machinery


WT5912

Inadvertent Starting


WT5912

Machinery Rundown Time


WT5912

The CE Marking is not a mark indicating conformity to a standard but rather a mark indicating conformity to the legal requirements of EU Directives.

CE Mark


WT5912

• CE Marking is the symbol as shown on the top of this page. • The letters "CE" are the abbreviation of French phrase

"Conformité Européene" which literally means "European Conformity". • The term initially used was "EC Mark" and it was

officially replaced by "CE Marking" in the Directive 93/68/EEC in 1993.

CE Mark


WT5912

• Machinery must bear the “CE” mark in order to be deemed in compliance with these regulations.

• Must not add to machinery – must be there… criminal offence to try to add it.

• Also an offence to reduce the visibility of the “CE” Marking on a machine.

CE Mark


WT5912

The existence of the “CE” marking on a piece of machinery should indicate that its manufacturer has met all relevant standards and requirements.

CE Mark


WT5912

Never assume that machinery is safe just because it has a “CE” marking

CE Mark


WT5912

Mandatory/Action

Regulatory/Prohibited

Emergency/Permission

Warning/Caution-Danger


WT5912

Surface Planer


WT5912

Surface Planer1 Guide Fence

2 Infeed Table

3 Isolator

4 Infeed Dept Adjustment Wheel

5 Start/Stop Control

6 Infeed Adjustment Lock Handle

7 Blade Guard

8Blade Guard Clamp/Release Mechanism

9 Outfeed Table

10 Guide Fence Adjustment Wheel

11 Guard Guide

12 Guide Fence Lock Handle

2

1

3

4

57

9

8

6

11

12

10


WT5912

Step 1:Isolate machine

Step 2: Squaring guide fence• Set up surface planer guide fence @ 90⁰ to

table surface• Note infeed and outfeed table. • Square to infeed using right angle square.• Use red lock handles to open and adjust fence.• Lock gently when fence is perpendicular to

infeed table.

Infeed Table

Out feed Table


WT5912

Step 3: Setting infeed dept• This machine is calibrated in metric.• Maximum recommended material removal

is 1-2mm/pass• Dept stop to be set at 2mm• Open infeed lock handle• Turn wheel to left to drop table to 2mm• Lower you drop, the more the planer

cutting block is exposed• Close infeed lock handle when required

dept is achieved.• * Do not adjust outfeed table level, this is

for maintenance purposes only*

Infeed Infeed


WT5912

Step 4: Setting the guide fence width• Minimum blade exposure• Width of material + 10mm is recommended• This results in 10mm blade exposure - Safety• Adjust lock handle to wind in or out guide fence• Lock in appropriate position


WT5912

Step 5: Guard adjustment• Guard set for face side = handle up – 10mm

blade exposure• Guard set for face edge = handle flat – no blade

exposure


WT5912

Step 6: Material Inspection• Inspect material for the following defects

• Cupping• Bowing• Twist• Knots• Loose grain

• Example - if material is bowed, set the bowed face to the surface planer table surface and process. Material should never be run through hump side down.


WT5912

Step 7: Determining face side and face edge• Use machine surface to check square• Select appropriate face side and face edge

based on inspection• Preliminary surface marking using an ‘X’ with

no less than a HB pencil• Ensure extraction gate valve is open and

extraction is on• Proceed to plane material – face side and face

edge only! Gate Valve locate on extractor pipe just above surface planer

X X


WT5912

Step 8: Planing face side• Material position • Hand positions

Ensure Guard Guide is in a vertical position to plane face side

Dept of Hand Dept of Hand


WT5912

Note Hand Positions in relation to material


WT5912

Step 9: Planing face edge• Material position• Hand position

Ensure Guard Guide is in a horizontal position to plane face edge

Dept of Hand Dept of Hand


WT5912

Note Hand Positions in relation to material

Split second blade ExposureBlade guard flat onto table


WT5912


WT5912

Thicknesser


WT5912

Thicknesser

1

2

4

3

1 Extractor Pipe

2 Control Panel

3 Adjustment Lever

4 Thicknesser Bed


WT5912

Lab sequence – Thicknesser Step 1:

1. Unlock twist release stop mechanism2. Press green button to start3. Allow machine to build up, this can be determined by

noise consistency4. When noise is consistent flip delta switch to on position5. Feed rate, i.e. Speed at which material is passed, is set.6. Adjust table height as required7. Feed material as directed

Delta Switch

Twist Release Stop

Display Panel

Feed Rate Control

Stop/Start

Thicknesser Bed Adjustment

Control


WT5912


WT5912

Step 4: Rip Saw


WT5912

Step 4: Rip Saw

1

2

3

8

6

7

4

5


WT5912

4

5

6

109

8

4 Blade Adjustment Wheel

5 Power Isolator6 Start/Stop8 Crown Guard9 Riving Knife10 Saw Blade

Step 4: Rip Saw


WT5912

OUTFEED

TABLE SLILDING

TABLE

Step 4: Rip Saw


WT5912

Cross Cutting

Ripping

Step 4: Rip Saw


WT5912

#NB: Ensure correct use of PPE and push sticks are practiced.

Mark Line across end grain:1. Horizontal when cutting2. Vertical when planing

Step 4: Rip Saw – Ripping Material


WT5912

Step 4: Rip Saw – Ripping Material


WT5912

Refer back to your cutting list to make sure you cut pieces to the correct length.

After the material has been ripped and surface planned into correct / required sizes, you then have to cross-cut the sections to the required length. For this, you will have to set up the fence on the sliding table to achieve this.


WT5912

#NB: Ensure guards and guides are set-up and used correctly and safely.


WT5912

Wt5912 unit0 week1

Education

Transcript of Wt5912 unit0 week1