WRAPAROUND SLEEVES (CRSM)1000V, COATED, MEDIUM WALL, NON-REINFORCED

• Secure environmental seal

• ANSI C119.1 qualified

• RUS accepted

• Unlimited shelf life

KEY FEATURES TE Connectivity’s (TE) Raychem CRSM sleeves close easily with a permanent locking system that consists of a raised rail profile and a stainless steel channel.

CRSM sleeves are mainly used as insulation for 1/C low-voltage power cables up to 1000V and for rejacket repair up to 35 kV or for general sealing applications. Hot-melt adhesive provides a secure environmental seal.

TE’s CRSM sleeves are qualified to ANSI C119.1 and rated to ICEA electrical withstand test for 1000V. RUS accepted for use as jacked restoration materials on JCN cable.

CRSM sleeves are mainly for use on standard poly or elastomeric insulated or jacketed cables or lead-jacketed cables, including aluminum or steel armored. They also have an unlimited shelf life, when stored under normal conditions.

ENERGY /// CRSM WRAPAROUND SLEEVES

Customers can count on consistent, high quality products, driven by TE’s proven innovation and backed by our extraordinary customer support.

CRSM Wraparound Sleeves

te.com/energy© 2014 TE Connectivity Ltd. family of companies. All Rights Reserved. E561 10/2014

CRSM, Raychem, TE Connectivity and TE connectivity (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.

FOR MORE INFORMATION: TE Technical Support Centers

USA: + 1 800 327 6996France: + 33 380 583 200UK: + 44 0870 870 7500Germany: + 49 896 089 903Spain: + 34 916 630 400Benelux: + 32 16 351 731Canada: + 1 (905) 475-6222Mexico: + 52 (0) 55-1106-0800Latin/S. America: + 54 (0) 11-4733-2200China: + 86 (0) 400-820-6015

ENERGY /// CRSM WRAPAROUND SLEEVES

PRODUCT SELECTION INFORMATION: DIMENSIONS IN INCHES (mm) Description Primary Insulation

Conductor Size (AWG/Kcmil)

1000V Use Range

General Use Range

Length Wall Thickness

(min. - max.)

Standard Pack

(pcs./Box)

CRSM 34/10-200 #8 - 2/0 0.25 - 0.60 (6 - 15)

0.25 - 1.20 (6 - 30)

8 (200) 0.02 - 0.1 (0.3 - 2.4)

3

CRSM 34/10-1200 #8 - 2/0 0.25 - 0.60 (6 - 15)

0.25 - 1.20 (6 - 30)

48 (1219) 0.02 - 0.1 (0.3 - 2.4)

5

CRSM 53/13-200 3/0 - 400 0.60 - 0.95(15 - 24)

0.60 - 1.80 (15 - 46)

8 (200) 0.02 - 0.08 (0.3 - 2)

10

CRSM 53/13-1200 3/0 - 400 0.60 - 0.95(15 - 24)

0.60 - 1.80 (15 - 46)

48 (1219) 0.02 - 0.08 (0.3 - 2)

5

CRSM 84/20-750 500 - 1000 0.95 - 1.40(24 - 36)

0.95 - 2.70(24 - 69)

30 (750) 0.02 - 0.08 (0.3 - 2)

10

CRSM 84/20-1200 500 - 1000 0.95 - 1.40(24 - 36)

0.95 - 2.70(24 - 69)

48 (1219) 0.02 - 0.08 (0.3 - 2)

5

CRSM 107/29-1000 1000 - 2000 1.30 - 2.00 (33 - 51)

1.30 - 3.60 (33 - 91)

40 (1000) 0.02 - 0.08 (0.3 - 2)

10

CRSM 107/29-1200 1000 - 2000 1.30 - 2.00 (33 - 51)

1.30 - 3.60 (33 - 91)

48 (1219) 0.02 - 0.08 (0.3 - 2)

5

CRSM 143/36-1200 - - 1.65 - 4.95(42 - 126)

48 (1219) 0.02 - 0.08 (0.3 - 2)

5

CRSM 198/55-1200 - - 1.65 - 4.95(42 - 126)

48 (1219) 0.02 - 0.09 (0.3 - 2.1)

5

Dimension values provided are typical. Related test reports: EDR-5124, 5192, 5361.

REFERENCE DIMENSIONS FOR FEILD CUTTING OF CRSM: INCHES (mm)Damage Length Total Seal Length

<3 (<76) 3 (76)

3 - 12 (76 - 305) 4 (102)

12 - 24 (305 - 610) 6 (152)

> 24 (>610) 8 (203)Cut Sleeve Length = Damage Length + Total Seal Length

ORDERING INFORMATIONKit includes wraparound sleeve and stainless steel channel closure. Both can be field cut for shorter requirements. Kit does not include connectors

Bulk options are also available. Consult your TE Connectivity representative.

GEL H-FRAME CLOSURE - 1000V (GHFC) FAST AND EASY TO USE AND INSTALL

• PowerGel sealant filled splice for buried, underground, and overhead applications

• Fast and simple to install

• PowerGel sealant easily peels away leaving a clean connection

• Can be used on aluminum or copper cables

• Meets requirements of ANSI C119.1

KEY FEATURES TE Connectivity’s (TE) Raychem GHFC gel H-frame closure provides a fast and simple method for insulating and environmentally sealing l ow-voltage cable taps and splices made with H-frame compression connectors.

Simply place the connection on the closure and press the closure together. It’s that easy—no tapes, mastics, tools, or mixing are required. The closure can be easily installed with one hand, even while wearing high voltage gloves.

The closure utilizes TE’s innovative PowerGel sealing gel to protect the connection from moisture ingress, corrosion, and pollution. TE’s pre-cured polymer gels are blended together and crosslinked to give high elasticity, high cohesiveness, and temperature stability. They have been in use in other applications for over 10 years.

TE’s gels are ideal for sealing electrical connections from moisture, dirt, and other contaminants. There is no need to apply heat or use sealants that would make re-entry difficult or impossible. When compressed, gels will coat and adhere to surfaces; they can be easily removed by pulling or peeling them off.

ENERGY /// GEL H-FRAME CLOSURE - 1000V (GHFC)

Customers can count on consistent, high quality products, driven by TE’s proven innovation and backed by our extraordinary customer support.

The low-voltage H-frame closure is ideal for both

underground and overhead applications and is

especially useful for street lighting applications.

Gel H-Frame Closure - 1000V (GHFC)

te.com/energy© 2005, 2007, 2012 2014 TE Connectivity Ltd. family of companies. All Rights Reserved. 1308929 E142 10/2014

PowerGel, GHFC, Raychem, TE Connectivity and TE connectivity (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a zparticular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.

FOR MORE INFORMATION: TE Technical Support Centers

USA: + 1 800 327 6996France: + 33 380 583 200UK: + 44 0870 870 7500Germany: + 49 896 089 903Spain: + 34 916 630 400Benelux: + 32 16 351 731Canada: + 1 (905) 475-6222Mexico: + 52 (0) 55-1106-0800Latin/S. America: + 54 (0) 11-4733-2200China: + 86 (0) 400-820-6015

ENERGY /// GEL H-FRAME CLOSURE - 1000V (GHFC)

Frangible fingers provide wide cable range.

Silicone gel is high dielectric insulation and provides constant pressure on cable and connector to provide waterseal. PowerGel sealing gel is specially formulated for high temperature environments.

Snap-lock ensures that cover remains closed.

Molded cover of UV stable, impact resistant polypropylene provides rugged protection for underground or overhead applications.

TEST REPORTRelated Product Information: EDR–5264 Test Report

PRODUCT SELECTION INFORMATION Description Conductor Size (AWG/mm2)

Main Tap DieStandard Package

GHFC - 1 - 90 #6 - #2 (16 - 35) #14 - #8 (2.5 - 10) “BG” 10 each

GHFC - 2 - 90 #2 - 2/0 (35 - 70) #14 - #6 (2.5 - 16) “O” 10 each

GHFC - 2.5 - 90 1/0 - 4/0 (50 - 95) #6 - 3/0 (16 - 85) “D” 30 each

GHFC - 3 - 90 350 (185) #4/0 (95) “N” 6 each

TESTINGTE’s GHFC gel H-frame closure has been tested to and meets the following requirements:

Testing Test Conditions

Underground Splicing ANSI C119.1 - 1986

Fungus Resistance ASTM G - 21

ORDERING INFORMATIONSelect the appropriate catalog number. Selections are based on typical dimensions for low-voltage, insulated cable and connectors. Approved connectors include, but are not limited to:

Product Approved Connectors

GHFC - 1 - 90 Homac UB214; T&B 63105; Blackburn WR9; Burndy YPC2A8U

GHFC - 2 - 90 Homac OB22, OB44, OB102, OB103; Burndy YHO - 1, YHO - 2, YHO100, YHO125, YHO150; Blackburn WR139, WR159, WR179, WR199; ILSCO AH1; T&B 63110; UTILCO HT1, HT2

GELWRAP WRAP-AROUND SPLICE COVEREASILY INSTALL CONNECTIONS UP TO 1000V

• Simply wrap and snap the sleeve on any cable in the use range

• Easy and quick to install

• For splice cover, cable rejacketing, underground or overhead applications

• Closure sleeves are compatible with solid dielectric cable insulations

KEY FEATURES TE Connectivity’s (TE) Raychem GelWrap closure sleeves quickly and conveniently, insulate and seal buried electrical connections rated up to 1000 volts. The robust yet compact design is engineered to handle the harsh environments of direct burial and manhole applications. GelWrap sleeves are equally well suited for insulation and jacket repair.

PowerGel sealing material was specifically developed for the electrical power industry. This unique hydrophobic gel material provides an excellent moisture seal over wide operating temperature ranges (-40°C to 95°C). Both the gel and housing are UV resistant and suitable for overhead applications.

Other common uses for GelWrap sleeves include LV cable repair splices, MV cable jacket repair, MV splice rejacketing, and Elbow sealing sleeve.

ENERGY /// GELWRAP WRAP-AROUND SPLICE COVER (1000V)

Customers can count on consistent, high quality products, driven by TE’s proven innovation and backed by our extraordinary customer support.