WinSheet - Summer 2010

WINTER 2007

F.W. WEBB COMPANY

SheetVALVES /

AUTOMATIONHVAC/R EQUIPMENT /

CONTROLS

INDUSTRIAL SPECIALTIES

PUMPS

PLUMBING

FELKERWheatland

PIPE / TUBING / FITTINGS / FABRICATION

ARMSTRONG

Made In The USA

The Webb IndusTrIal neWs Is a QuarTerly CaTalogue of f.W. Webb Company summer 2010

In the News ....................................2-3

Pipe & Tubing ...................................4

Valves ...........................................5-9

Hose ...............................................10

Webb Piping Solutions ......................11

Specialty Process Piping & Hose Solutions ........................12-13

Fire Protection .................................14

Webb Pump ....................................15

Webb Kentrol/Sevco ..................16-18

Webb USCO – Plastics ...............19-20

Webb BioPharm ..............................21

Webb HVAC/R & Controls ...............22

Webb HVAC – Energy Saving Commercial Equipment ...................23

Webb HVAC/R – Source 1 Parts ......24

Refrigeration ...................................25

Institutional/Property Management ...26

Industrial Specialties ...................27-28

Tools .........................................29-30

Safety ........................................30-31

In ThIs Issue:

In the

News. . .

F.W. WEBB COMPANY www.fwwebb.com2

F.W. Webb’s 17th Annual Vermont Expo was held on May 6, 2010 at the Barre Auditorium in Barre Vermont. It was a great turnout, as always, with well over 100 manufacturers showcasing their products. A great time and great deals were had by all.

The Syracuse open house was a smashing success with over 900 customers and 1150 total including vendors and Employees. The new 100,000 sq foot facility was fully opened in February with a 5000 sq ft batch center. The customer and vendor feedback was outstanding and many prizes were given away. Everyone left with something!!

Syracuse Open House May 13, 2010

Pete Dwyer, F.W. Webb LP Gas Product Manager (r) talking with a customer.

1) From left to right: Joe Vanderworken of Woodcrest; Tom McGee of RST Builders; Keith Button and Dennis Button of F.W. Webb; and Mark Robinson of Comfort Systems USA. 2) Emerald City Scottish Pipe band performed live! 3) Steve Perkins, F.W. Webb Sales Representative, Ed Robicheau, General Manager (r) 4) It was a great turnout with the crowd enjoying the food. 5) Many vendor displays throughout the new facility. 1 2

543

Customers walking throughout the many vendor booths at the Expo. Lenox promotes Lenox 301.

Qualifying times won tickets to Loudon NH’s NASCAR June race.

A view of the Expo from above - it was a great turnout!

Milwaukee Tool tent specials.

F.W. Webb’s PurePro booth displaying an array of products.

NHMS booth displays Nick Sweet’s ACT car.

3Summer 2010 F.W. WEBB COMPANY

. . .(continued)

Tim Largay (Bangor General Manager) (l) shaking hands with Nick Pelletier (r).

Nick Pelletier Promoted to Operations Manager of Bangor Branch

Matt Hancur Promoted to Webb BioPharm’s Sanitary Pump Product Manager

Brett Finemore Receives the 2009 Lothar Kartanos Memorial Award

F.W. WEBB GOES GREEN IN BRaNd NEW HYaNNIS LOCaTION

Chip Slattery Promoted to Internet Marketing Manager

Announcing Chip Slattery as the newly creat-ed position of In-ternet Marketing Manager. “This position has been created in

the company so that we can grab more business on the world wide web,” quotes Jeff Pope. Chip’s position will be to market all the web sites that have been, and will be created for the internet. He will also be looking at current stuff like Twitter, Facebook and other sources to see where Webb can make more on-line noise. He will be trying to grab as many e-mail addresses as he can to blast out news and sales promotions also. When our new WebbConnect is ready, Chip will make sure that people know when they surf the internet. I look forward to Chip helping Webb to become a prominent player in this unique market. Congratulations Chip!!

At 65,000 square feet, F.W. Webb Hyannis is one of their largest branches in the area. The new location features a Frank Webb’s Bath Center, a massive warehouse with 20,000 sq. ft. mezzanine, 10,000 sq. ft. self service counter area and a fully networked training and conference area with a capacity for over 80 people. What is unique about this facility is that it heats the ware-house area and domestic hot water needs with a hybrid geothermal heating system. Prior to installing the new system, the “building envelope “ was upgraded as well. This included a thermal image of the building. They added insu-lation, sealed any cracks and improved weather stripping and dock seals to help make the building itself as energy efficient as possible. At the heart of the system are a water furnace distributed water-to-air heat pump system consisting of 15 heat pumps, 3 energy recovery units or heat exchangers, seven wells (3 feed and 4 return) and a 2000 gallon thermal mass tank with two heat exchangers. One unit heats water, the other takes heat from the water. The Cape has relatively stable groundwater temperatures, (45-55 degrees) which makes it ideal for this type of application. The energy recov-ery units keep the warehouse temperature range from 55-75 degrees. The hybrid part of the system is the solar side.On the roof of the building are thirty Buderus SKN3.Ov flat plate solar panels. Twenty-six of these panels provide heat to the warehouse area and four provide domestic hot water. The solar system reduces the load on the geothermal sys-

tem and on a perfect, sunny day will provide up to 750,000 BTUs of energy, equivalent to 5.4 gal of #2 fuel oil. All of the products used in this installation, from pipe, valves, fittings, solar panels, expansion tanks, heat exchang-ers, pumps, controls, variable speed drives, storage tanks, energy recovery units, data loggers, heat pumps, thermo-stats and more are available from Webb. The building will be Energy Star certified and then re-certified after a year of operation. There is no back-up boiler for this installa-tion. They burn no fossil fuels. It is 100% geothermal and thermal solar. Says branch manager Marc Nantel, “I am extremely proud of our new building and of this new instal-lation in particular. Our mechanical contractor did a great job on this installation. We are going to showcase it to all of our customers. It really is state of the art and best of all, we were able to coordinate and supply all of the materials for the job.”

For more information, a facility tour or a quote, please call the Hyannis branch at 508-775-3890. For other information or a branch nearer to you please call the main office at 781-272-6600.

Please join us in congratulating Nick Pelletier on his promotion to Operations Manager in the F.W. Webb Bangor branch. Nick has been with Webb since 2006 as CIP Co-ordinator in the

state of Maine and he is looking forward to this new opportunity.

We are pleased to announce that Matt Hancur has been promoted to Webb Bio-Pharm’s Sanitary Pump Product Manager. As we all know,

Matt has embraced the pump aspect of our business over the last 18 months and has dedicated his time learning how to size pumps and all of the techni-cal aspects that go along with that. We have seen a significant increase in our pump sales along with our pump repairs and a lot of this has to do with Matt’s expertise and willingness to learn. Con-gratulations Matt!

I am happy to an-nounce that Brett Finemore of th Queens-bury branch will re-ceive the 2009 Lothar Kartanos Memorial Award. The previous recipients were Devon

Craig of the Williston branch and Daryl Schoellkopf of Kentrol/Sevco.

This award exemplifies the highest stan-dards of Sales Professionalism, Leader-ship, Teamwork, Dedication and Loyalty that Lothar Kartanos epitomized through his career at F.W. Webb Company.

• Carbon• Stainless

• Aluminum• Copper

• Cast Iron• Brass

• Plastic• Fiberglass/Epoxy

4 F.W. WEBB COMPANY www.fwwebb.com

PVC/CPVC – HARVEL

Webb Has All Different Types of Pipe/Tubing 1/8” to 120” and Larger!

Lengths & CoilsWebb has inventory of over one-half million lbs. of copper tubing from ¼” to 6” in diameter.

304/L & 316/L Stainless, Schedules 5, 10, 40, 80• 1” – 36”• Flange, bell, roll groove

and configurations• Stock sizes in 20’ lengths• Special lengths available

Continuous Production• 2”– 8” in schedules 5, 10, 20,

and 40, Lengths up to 60’

Batch Production• 10”– 60” in schedules

5, 10, 20, 40, and 80, lengths up to 48’

F.W. Webb Company has the largest pipe inventory in the Northeast. Our fabrication shop is capable of cutting, threading, and grooving through 12” pipe. When you call F.W. Webb, a professional inside

sales force will handle your orders and questions. We can fabricate for immediate delivery and have 1/8” – 24” pipe in stock.

Wheatland • US Steel • Sharon Tube Charlotte • Cerro

Copper Tubing/Coils / Carbon Steel Pipe• Domestic A53 CW, ½” – 4” Sch n end, 1/8” – 4” in black T&C, ½” – 4” in Galvanized T&C ½” – 4” in Sch 80 in black plain end, 2½” – 4” in

Sch 40 groove x groove• Domestic A53 ERW, 2½” – 30” Sch 40 & standard sizes• Domestic A53 ERW, 8” – 16” in light weight ranges • Domestic A53 ERW, 6” & 8” XH black plain end• Domestic A106 Seamless, ½” – 2” in Sch 40 & 80• Imported A106 Seamless, ½” – 12” Sch 40 & 80

Stainless Steel• Domestic 2”– 12” Sch 10 304L – A312, 316L – A312, 304L – A778 (3”),

316L – A778 (3”, 10”, 12”)• Victaulic Sch 5 for Pressfit

PVF • Plumbing • Sprinkler • HVAC• 100 customer service persons• 200 delivery trucks• Dedicated account manager• $90,000,000 inventory• Product application specialists• 24-7-365 • Hard to find products• Professional submittals• 65+ branches

• Job usage reports• WebbConnect, On-Line

access (www.fwwebb.com)• Expediting• On time . . . Accurate . . .

Complete Deliveries• More products & services

less hassle• Project pricing

StainleSS Steel PiPe Steel PiPe & Fabrication

Soil PiPe cerro coPPer tubing/coilS

Our Pipe Depot Stocks...

All Sizes and Schedules 1/8” − 24” In Stock

Cast Iron Soil Pipe & Fittings


ValvesMade In The USA

100% American Made

19 SerieS bronze SaFety ValVeSFor Steam, Air and Gas ServiceA dependable cast bronze high capacity safety valve ideal for use on all types of boilers, piping systems and unfired pressure vessels. This rugged design features improved alignment for enhanced performance and reliability. Other features include optional metal seating, stainless steel wetted trim in all sizes, and a new, more descriptive model numbering system. Flow ratings are National Board certified in accordance with ASME sections I and VIII.

ASME Section I and VIIISizes ½” through 2½”Set pressures 5 to 300 psigMaximum temperature is 406°F, 422°F for model 19S

Applications:Overpressure protection of steam boilers, sterilizers, distillers, cookers, and pressure reducing stations. Pneumatic conveying equipment, air compressors, receivers and dryers. Steam, air and gas accumulators, pressure vessels and pressure piping systems.Features:• Wide wrenching hex for easier, faster installations• Stainless steel springs are standard• Choice of Teflon® or metal-to-metal seating• Teflon® PFA seat resists corrosive boiler chemicals and

excessive vibration• High-capacity full nozzle design available in six orifice sizes• Two control rings for maximum performance and adjustability• Short “tuned” blow down minimizes product loss• Tapped body drain allows piping of condensate away

from equipment• Reduced repair costs: soft seat easily replaced• Registered in all Canadian provinces under CSA B51 CRN G8547.5C

119 SerieS caSt iron Flange SaFety ValVeSThese flanged, heavy duty and high capacity safety valves are ideal for use on all types of boilers, pressure vessels and pressure piping systems. These ruggedly built valves offer you a cost-saving alternative to conventional steel bodied valves without compromising quality or performance. These valves feature a top guided design and two control rings to ensure seat tightness, repeatable performance and extended service life. Flow ratings are National Board certified. ASME Sections I & VIII, for steam, air and gas service Set pressures to 250 psig at 450°F max Flanged inlet sizes 1½” through 6” ANSI 250 lb. Threaded inlet sizes 2” through 3” FNPTApplications: Overpressure protection of steam boilers, deaerators, accumulators, pressure reducing stations and pressure piping systems. Pneumatic conveying equipment, air and gas compressors, receivers and dryers. Per the ASME code, cast iron safety relief valves must not be used for lethal or flammable fluid service.Features:• Metal to metal seating, lapped to optical flatness• High-capacity semi-nozzle design available in 8

orifice sizes• Stainless steel wetted trim is standard• Two control rings assure maximum performance

and dependability• Designed for new installations and replacement of

existing valves (high flow rates and face to face dimensions enable direct replacement of most competitive models)

• Designed for ease of service or repair• Ductile iron caps, forks and levers for added durability• Registered in all Canadian provinces under CSA B51, CRN OG8547.5C• Drip pan elbows for discharge piping available

500 SerieS multi PurPoSe SaFety relieVe ValVeSVersatile safety relief valve available in bronze, carbon steel or all stainless steel construction, suitable for a wide range of steam, air, gas and liquid applications. High capacity full nozzle design is available with metal to metal, PCTFE or elastomer O-ring seating. Short tuned blowdown and backpressure tight body minimizes fugitive emissions and product losses in the event of valve operation. ASME Section VIII Air, Steam, and Liquid service Sizes 1/2” through 2” NPT Set pressure range 5-900 psig @ 800°F max. Applications:• Pressure Vessels and Pressure Piping Systems• Pumps, Tanks and Hydraulic Systems• Thermal Relief of Liquid Filled Vessels• Chemical, Process and other Industrial Plants.• Power Plant Auxiliary Systems• Cryogenic and Industrial Gases• Air and Gas Compressors and Dryers• Vacuum Relief

Features:• Wide Range of Materials and Options• One Trim Design is Suitable for Steam, Air/Gas and Liquid Service• High Capacity Full Nozzle Design• Stainless Steel Springs• Integral Lift Stop• Self - Aligning Pivoting Disc• API 527 Seat Tightness, standard for all models• Tuned Blowdown - Short and Adjustable, reduces product losses.• Backpressure Tight Design Minimizes Fugitive Emissions• CSA B51 CRN OG8547.5C

Section iPower BoilerS

Section ViiiPreSSure VeSSelS


Section iPower BoilerS


Delivering high quality, innovative flow control solutions for abrasive wear resistance, corrosion resistance, anD critical/hazarDous containment in a wiDe range of inDustries worlDwiDe.

The mechanical retained seal option is now standard on all sizes of the Fabri-Valve C67’s. This popular option features set screws that are drilled into the bottom portion of the flange. These screws press against the seal that is retained in the valve body by its trapezoidal shape. Since the feature is now standard, there is no additional cost for this popular feature.

If you have any questions, please contact your F.W. Webb Sales Representative.

Fabri-ValVe c67 popular option now standard!

cam-tite® and cam-line® ball ValVes with h-series compact actuators haVe been conVerted to c-series compact ii actuators. the compact ii is one oF the most rugged actuators on the world market. due to its ruggedness, compact oFFers a seVen year warranty on the actuator.

Advantages of the C-Series Compact actuators:• Powerful - Four pistons generate twice the torque of compa-

rably sized two piston designs• Energy saver - Reduces the average air consumption by 50%

due to compact physical size• Fastest - Has faster stroke due to shorter travel distance• Smallest and Lightest - Size is about 50% of a traditional 2

piston actuator with same torque value, due to the 4 piston design

• Minimal easy maintenance• Less wear of moving parts (piston and o-rings) than any tradi-

tional 2 piston actuator due to the concentric pistons design• Safe springs configuration change with cover bolts long

enough to release spring load before removing the cover• Easy spring configuration changes, due to concentric spring structure• Wide options of Fail/Safe combinations, particularly in low air operating pressure

The H-Series actuator has been discontinued and ITT will no longer ship or quote the obsolete H-Series actuator. If you have any questions, please contact your F.W. Webb Sales Representative.


itt engineered Valves

to avoid the after what – switch to flexitallic.

gasket failures can lead to system downtime and

serious environmental impact. as the industry leader,

flexitallic spiral wound gaskets are consistently

manufactured to exacting engineering standards.

they’ll stand up to the toughest temperature and

pressure conditions, they’re resistant to virtually all

corrosive and toxic media, and you get the same

high quality gasket on time, every time.

gasket specifications should be reviewed and up-

dated every 2 years. call f.w. webb today for a

gasket consultation to make sure you are specifying

the most reliable gaskets.


Valves

For more information, please contact your local F.W. Webb sales representative.

Don’t sweat it.

ProPress® it!Viega ProPress fittings...the fast, flameless, reliable way to connect 1/2" – 4" copper and stainless pipe.To win a Press Tool or a Viega stainless cooler, visit www.NoSweatFittings.com for details.For complete rules on how to win, go to www.NoSweatFittings.com/rules.html.

Engineered valve solution to reverse fl ow • problems encountered in all process pipelines.Lighter weight than standard swing check valves.• Independent plate suspension improves dynamic • response and minimizes valve chatter.Retainerless design provides for no fugitive • emission.

High Performance shut off and modulating • service for standard industrial process lines. Classes 150 - 600.• Materials of construction options include •

Carbon and Stainless Steels.Both Wafer and Lugged body styles available. • Sizes up to 48” available from factory inventory.•

Triple offset design provides reliable, zero-leakage, • bi-directional shut-off closure to 1000° F.Classes 150 - 600.• Fire Tested to API 607 Rev. 4.• Low break-away and operating torque.• API 609 Table 2 Lug style as well as Double • Flange Long & Short patterns available.Sizes to 24”.•

Aloyco • Center Line • Compac-Noz • CRANE • Duo-Chek • Flowseal • Jenkins • Krombach • Noz-Chek • Pacific • Stockham • Triangle • Uni-ChekReliability you can count on at every turn.

CRANE & F.W. Webb - the most experienced team in the Northeast.


Valves

ASCO® 8262/8263 SerieS two-way direct acting solenoid valves

The 8262/8263 Series two-way direct acting solenoid valves now have increased AC and DC pressure ratings and real-time online configuration and ordering. The valves are ideal for applications in industrial and agricul-tural machinery, food products machinery, laundry and dishwashing appliances, and medical and analytical in-struments. The 8262/8263 Series valves are available in normally-closed, brass and stainless steel constructions. They can be used to control the flow of air, water, and light oil and are available in 1/8-inch, ¼-inch, and 3/8-inch pipe sizes.

The online configuration tool allows a customer to quick-ly build a valve to meet a set of specific requirements. It then displays the list price, availability, 3D CAD draw-ings, and specifications for the configured product. The configurator generates an order code for the valve that permits an immediate online purchase, plus greatly sim-plifies the reordering process. Most of the 8262/8263 Se-ries valves are available through the ASCO Today same-day shipping program. To download the 8262 catalog, features and benefits sheet, and design a valve, visit ascovalve.com/8262configurator.

Please contact your local F.W. Webb representative for more information.


Valves

WATER HAMMER?

You don’t have to live with it... use the right check valve.

Contact your F.W. Webb representative for more information.

Silent cHecK VAlVeS

f.w. webb’s hose Division can make custom hose assemblies specific to the customers’ neeDs.

Gates is an engineered system of hose and fittings designed to be used together for top performance, and a long, safe, service life.

Pre-Season FUEL OIL DELIVERY Promotion!


The F.W. Webb hose division has the capacity to make hydraulic hose assemblies to your specifications. Whether it is ¼” or 2”, 150psi to 6,000 psi. We can meet your requirements with the highest quality and reliability with Gates Rubber Products.

HoseContact Peter Marshall, Gary Rose or Mike Costa: 800.795.6390

Peter Marshall

Order by September 30, 2010 and SAVE 10% off the regular price!

Completely redesigned from the inside out to incorporate the best materials and construc-tion. Fuel Oil Delivery Hose will stand up to your toughest, roughest service. Whether you’re delivering to homes, businesses, farms or construction sites, Fuel Oil Delivery is the hose you can depend on for long -lasting trouble-free service. To order, please contact Peter Marshall, Mike Costa or Gary Rose at 401.463.4108.

Contact your F.W. Webb Sales Representative for more information.

installation of Parker Legris Transair Push-to-Connect Piping System


Gary RoseGeneral ManagerPiping Products

Contact Gary Rose, Mike Costa or Peter Marshall: 800.795.6390

Pipe Fittings/webb Piping Solutions

Handling corrosive materials in these challenging economic times can be difficult. Our factory trained staff here at Webb Piping Products have the product knowledge, and the capability to assist you in your most difficult applications. Crane Resistoflex and Crane Xomox are the trusted quality brands in the industry. There extensive product offering coupled with the team at Webb Piping Products are ready to assist you in offering the right products for your corrosive handling needs. Call us first for cost effective corrosion handling needs.

tylok is a registered Women Business Enterprise (WBE) with the following companies and resides on their Supplier Diversity Database.

The Transair piping system was Specifically Designed and Engineered for Compressed Air to eliminate the issues that are created by Traditional Pipe Systems. Transair has the lowest overall cost of installation and ownership. It is energy efficient, qualifies as capital equipment, easy to install and modify.

Contact your local F.W. Webb stocking distributor for more information.

• Miller Coors• BP• American Electric Power• Exxon Mobil• Anheuser-Busch• Chevron• Duke-Energy • International Paper• Bristol-Myers Squibb

Company• Nestle USA/Nestle Waters

North America/Purina PetCare/Dreyers

• Xcel Energy

• General Mills• ADM• Kraft Foods• Raytheon Company• Daimler Chrysler Corporation• Sara Lee Corporation• Eaton Corporation• Marathon Petroleum

Company• Sara Lee Corporation• Eaton Corporation• Marathon Petroleum

Company

Brett Finemore (second from right) assists Bob Whittaker (right) in the training of Bob’s Instant Plumbing Group in Plattsburgh, NY.

NADCOR is located at 6 Industrial Blvd. Plattsburgh, NY 12901.

Bob’s installation team will be doing the install.

Seen here are Bob Whittaker and Brett Finemore certifying the installers on the installation process.

NADCOR Door manufacturer’s new facility will be opening this month in this new building (right) and wanted the Parker Legris Transair new technology for its compressed air system.

xomox® tuFline Fully lined Plug ValVeS

• These valves are more versatile, and often out-perform alloy valves.

• More economical than alloy valves.• With FEP and PFA lining, cast, dovetail

recesses and machined grooves lock the lining to the valve body casting. The locked-in lining is virtually impervious to shrinking, stress-cracking, collapse, or blowout.

• Unlike alloy valves, there is no need to inventory different valves for various applications.

• There is less chance of costly and dangerous installation errors.

• Media contamination is prevented.• Positive shutoff.• FEP and PFA locked-in lining.

Full port lined ball valves

2-way fully lined plug valves

3-way fully lined plug valves

xomox® tuFline Fully lined ball ValVeS

• Tufline Lined Ball valves have a metal-to-metal body joint to control compression of the liner for assured sealing.

• The seats are easily and quickly replaced.

xomox® tuFline Fully lined acceSSorieS

Standard port lined ball valves

Saunders IDV with ActuatorSaunders automated packages are available with options including switches, positioner, limit stop and visual open/closed indication.

Xomox® valves are lined with DuPont™ Teflon® fluoropolymer.

F.W. Webb Company uses only Resistoflex–lined pipe and fittings and are the only factory–authorized distributor in the Northeast. Our Conrac Machine allows us to fabricate custom spool pieces for Resistoflex piping systems up to 8” diameter. Our factory–trained personnel located at our Cranston, RI facility are here to serve you with years of experience and are knowledgeable in lined piping systems. Webb is the only exc lus ive author ized stocking distributor with the inventor y and per sonne l dedicated to serve you for all lined product requirements.

The Cost–Effective Way to Fight CorrosionCrane Resistoflex / Crane Xomox now give F.W. Webb the capability of offering the complete Crane package for corrosion–resistant plastic–lined pipe, fittings, and valves. The economical alternative that combines the mechanical strength of steel with the chemical resistance of an engineered plastic. Why live with the constant maintenance and replacement of inexpensive materials or the outrageous price for alloy piping?

crAne reSiStoFlex and crAne xomox: You’re Single Source for Your MoSt difficult corroSion applicationS.

Tufline Fully Lined Accessories are a reliable and economical alternative to costly high-alloy products.• Wafer Swing Check

Valves• Ball Check Valves• Piston Check Valves• Sight Flow Indicators• Strainers• Tank Bottom Valves• Poppet Check Valves• Clamp Valves

Saunders IDVAvailable with various body linings and diaphragms appropriate for a wide range of applications


Contact Gary Rose, Mike Costa or Peter Marshall: 800.795.6390Pipe Fittings/webb Piping Solutions

We’re celebrating our 90th anniversary. Ninety years of providing the Petrochemical, Refinery and Polymer markets, world-wide, with the highest-quality, best-performing and most-reliable valves on the market today. No other company can match our longevity, process knowledge, design engineering capability, extensive product lines, world-wide sales network or customer focus. But, it appears those strengths are a well-kept secret.So, let’s start talking. Over the next 12 weeks we’ll show you why Strahman is the best choice for your process valve needs. Strahman – great before and truly best now.

In 2004, Strahman made a strategic acquisition of the European valve manufacturer formerly known as “MG Fetterolf.” This gave us two fully staffed, state-of-the-art design and manufacturing facilities to serve the world’s needs for engineered valves. One is our world headquarters in Bethlehem, PA, U.S. and the other in Mery, France. This also brought Strahman over 20 years experience in the design and manufacture of engineered process valves.

Strahman designs and manufactures a full line of the world’s highest quality, custom, process and fabricated valves:

You know the name but do you know who we really are?

• Piston Valves

• Severe Service Gate Galves

• Sampling Valves

• Injection Valves

• Line Blinds

• Control Valves

• Diverter Valves

• Severe Service Metal-Seated Ball Valves

• Spray Rinse Valves

• Triple-Offset Butterfly Valves

Piston valves? Yes, but a whole lot more.Sampling valves? Yes, but a whole lot more.


Pipe Fittings/webb Piping SolutionsContact Gary Rose, Mike Costa or Peter Marshall: 800.795.6390

F.W. WEBB COMPANY www.fwwebb.com

Save up to 60% jobsite time and reduce risk of leaks during installation!AquaFlex Series AQB (braided) and Series AQU (unbraided) systems will be available to order with pre-assembled sprinklers.Systems will ship under a single part code in boxes of (10) with each assembled system consisting of:• Threaded branch line nipple• Flexible stainless steel hose• Leak-tested sub-assembly of reducer nipple, sprinkler with bulb

protector and paint shield• Escutcheon rings will ship in the same boxThe complete system will ship along with a box of (10) 24” 1-BEE2 installation-ready brackets.

The fastest, easiest flexible sprinkler drop system available.Experience the new AquaFlex one-piece, open-gate 1-Bee2 bracket system. This revolutionary, easy-to-use system offers:• Installation-ready 1-BEE2 one-piece bracket• Braided and unbraided hoses available from 31 – 72”• 24 and 48” width brackets• Short and long 90º elbows• One bracket design for

pendent, semi-recessed and concealed sprinkler installation

The Potter Never-Trip auxiliary drain replaces the old conventional drum drip. The Never-Trip is a completely assembled and tested compact valve and collection chamber assembly that conforms to NFPA 13 requirements for auxiliary drains for dry pipe and preaction systems.The Never-Trip prevents accidental trips of dry pipe and preaction systems and eliminates the cost associated with resetting these systems.With the handle in the COLLECT position the collection chambers are connected to the system through the valve and any water or condensate will flow directly into the collection chambers. The drain is isolated from the collection chambers when the handle is in the COLLECT position.As the handle is moved from COLLECT to DRAIN, the collection chambers are isolated from the system before they are connected to the drain through the valve.

aquaFlex Flexible SPrinkler FittingS with Pre-aSSembled SPrinkler

neVer triP auxiliary drain

aquaFlex StainleSS Steel SPrinkler FittingS

14

Mac McNulty

Fire ProtectionF.W. Webb’s Fire protection division continues to add the latest innovative products in the market. Some of our recently added items shown on this page continue to lend themselves to faster and easier installation and maintenance.

Feel free to ask us for any help we can offer with any of our products. Thank you for your continued support!

Contact Bob Schuler or Mac McNulty at 800.624.6647

Service Pressure: 175 PSIValve body: Galvanized steelCollection chambers: Galvanized SteelHandle: Chrome plated steelConnection and drain: 1” NPT

Summer 2010 F.W. WEBB COMPANY

Jim BodleGeneral Manager

Cranston, RI: 866-850-7867Winslow, ME: 800-452-1928

Syracuse, NY: 866-850-7867

Webb Pump continues to grow by providing honest service, competitive prices, knowledgeable team members, and world-class products that are delivered on-time, every time. We work hard to satisfy the requirements of our customers each and every day and look forward to earning your business as well!

Grundfos day at Webb PumP

15

Webb Pump was pleased to host the Grundfos Pumps on Tour trailer at our Cranston Rhode Island facility on May 14th from 10AM to 3PM! The event was extremely well-attended with more than 100 of our key customers taking the time out of their busy day to visit our shop and learn about one of our key product lines. The impressive Grundfos trailer featured the latest in pump technology and acted as a 30-person

classroom for the three product seminars that were con-ducted over the course of the day by Grundfos personnel. We anchored the event with a first-class catered barbecue and we added to the fun by raffling off five prizes including the Grand Prize Gas Grill as well as Red Sox tickets and restaurant gift certificates. While the weather was not the most cooperative, the rain held off and we even saw some sun by late afternoon!

Jim Bodle (r) and Dave Buckless (l) prior to the big event!

The trailer offered customers the opportunity to see the latest in energy-saving variable-speed technology as well as insight into the full breadth of the Grundfos family of companies.

Webb Pump was pleased to have over 100 people in attendance for the show; our repair facility doubled as a full-service cafeteria for the day!

B&M Clambake Company did an ex-ceptional job on the day and provided a full-service BBQ and steak-tips lunch for the crowd. The event was so well-attended that more food had to be brought in at the last minute to feed the masses.

The Pumps on Tour truck offered working demos of VFD-based pumping systems. Customers were able to get some hands-on time with the products to learn how process variables can affect their pump’s performance and energy usage.

Grundfos’ Pumps on Tour program is anchored by an impressive 80 foot tractor trailer that expands to provide a product showcase and a teaching classroom that sits 30 people.

Ted Haley took the opportunity to present a seminar on high-purity pump repair and testing to a team of engineers from Genzyme.

In addition to the hands-on pump demos, Andy Sayegh from Grundfos hosted three semi-nars over the course of the day that edu-cated our customers on the Grundfos company, latest products, and their commitment to new product development.

Sid Goode from Rhodes won a set of prime Red Sox tickets for a July game!

Farrell Loughlin from Rhodes was the proud winner of the Grand Prize Gas Grill!

Amazingly enough, we had two winners from Rhodes Technologies!

Pump Sales • Service • repair


mdm300 high-SPeed dew-Point hygrometer

Highlights:• Repeatedly fast measurements in less than

10 minutes for T95 down to -70°C (-94°F) dew point

• Long battery life: more than 48 hours of typical usage between charges

• Best in its class: ±1°C (±1.8°F) dew point accuracy

• External 4-20mA device input for dew-point, temperature or pressure transmitters

• Bluetooth connection for trouble-free download of data• Built in sampling system to 4500psi with external options to

6000psi

xzr500 and xcu500 Stack gaS SenSor and analyzer

Highlights:• Innovative, Metallic Sealed

Reference Sensor provides reliable and repeatable measurements with low maintenance

• Simple air calibration reduces cost of ownership

• Robust design maximizes sensor life• Flexible installation reduces retrofitting and start-up costs• Advanced design is easy to operate and maintain

Webb Kentrol/Sevco-OSI Appointed as Exclusive Representative for Michell Instruments in NEMichell Instruments is pleased to announce the appointment of Webb Kentrol/Sevco-OSI as the exclusive representative for Michell Instruments in the 6 New England States. Good technically competent representatives are difficult to find and keep and Michell is delighted to have Webb Kentrol/Sevco as a member of the Michell Instrument family.

eaSidew imPedance dew Point tranSmitter

Features:• 2-wire loop powered

connection• Dew point or ppm

moisture content• NEMA 4X• Excellent sensor

protection• Measurement range:

-150°F to “70°F• Operating temperature:

-40°F to “140°F• Fast response

Applications• Compressed air dryers. Plastic molding dryers. Ozone generators. Industrial gas

production and distribution

. Medical gases

. Pneumatics

. Welding gases

Pura PluS on-line trace moiSture eVent SenSor

Features:• Rapid response to ppb level moisture

events • Low ppb sensitivity (<1 ppb) • Innovative concept for multiple

measurement point installations • Low maintenance • Traffic light status indicator • Programmable warning and alarm

setpoints • Modbus network compatible • Multi-channel software for remote interface PC • Ultra-high purity (UHP) gas line specification

Webb Kentrol/Sevco along with our additions of O’Connor & Senecal, and Control Equipment offers complete process control instrumentation and control valve solutions to industry. We continually strive to bring you new and emerging technologies. Check out our web site to see more of the latest additions to our product offerings.

Daryl SchoellkopfGeneral Manager

800.452.1928207.873.7741

Process Control / Control Valves /Instrumentation & Overpressure Protection

Call Scott, Chad, Parrish, Nate, Dan, Cynthia, Anisa or Bob with your questions.800.452.1928

Chad Collier [email protected]

Parrish Lovell [email protected]

Nate Grady [email protected]

Scott Varney [email protected]

Cynthia Berkovsky [email protected]

Anisa Meigs [email protected]

Bob Richard [email protected]

Dan Desilits [email protected]


aShcroFtDiaphragm SealsTypes 400/500, All Welded• Recommended for use where clamped

joints are not acceptable• Assists in controlling plant emissions by

helping prevent potential leakage of hazardous chemicals

• All-stainless steel construction is standard. Other materials available

Instrument IsolatorType, 720, 741, 702, 703 High Displacement• For pressure instruments ranging from 30”

H2O to 750 psi• Used in instruments with large displacement

actuators• For applications requiring an impermeable

metallic diaphragm• Available in many material combinations• Diaphragm electron beam welded to isolator

body • Furnished with fill/bleed connection

PreciSion™ gauge ValVeS• Color coded dust caps for identification

• Non-rotating tip

• Oxygen service

• Integral hard & soft seats

• Anti-blow-out shaft

• Bubble tight back-seal

• 6,000 & 10,000 PSI valves

• PTFE and Graphite seals

• Pressure adjusted shaft seals

• Comprehensive mounting brackets

• Bubble tight seal on gas applications

• 100% full pressure test of each unit P3/T

P5/T

Venting Gauge Valve,

VGV

MultiportGauge Valve,

MPGV

Fairchild induStrial controlSPneumatic Pressure RegulatorsFairchild manufactures a complete line of precision pneumatic regulators including positive pressure, back pressure, and vacuum models. Quality engineering and manufacturing excellence assure that our pressure regulators meet all the requirements of a precision device including:

• Pressure accuracy• Sensitivity• Supply pressure immunity

• Drift-free settings• Low output droop

Electro-pneumatic TransducersThe electro-pneumatic transducer was developed as a smaller, lighter, and more cost effective alternative to the M/P. An electro-pneumatic I/P, E/P, D/P, and P/I transducer receives an analog or digital input control signal and converts it to a regulated pneumatic output that is directly or inversely related to the input.

Pneumatic Volume BoostersA pneumatic air volume booster reproduces a low flow control signal with a greater flow regulated output pressure. It uses an unregulated input pressure to maintain a regulated output pressure under flowing and nonflowing conditions.

Apollo® CompacTorque™ actuators are totally manufactured in the USA and feature rack and pinion design. Available in 11 sizes to complement torque requirements of most Conbraco valves. Both spring return and double acting versions are available. Spring return torque ratings at 80 psig are from 50–10,500 lb-in. Patented Universal Shaft Adapters make it easy for direct mount to Apollo butterfly valves.Double acting torque ratings at 80 psig range from 58 lb-in. to 25,000 lb-in. Apollo® CompacTorque™ actuators feature ISO 5211 interface dimensions and NAMUR solenoid and accessory interface dimensions. Conbraco also supplies pre-engineered stainless steel valve/actuator mounting kits for all valves equipped for automation.

Made In The USA

aPollo® Pneumatic actuatorS

800.452.1928207.873.7741

Specialists in Automated Valves, Process Controls,Overpressure Protection, and Engineered Systems.

F.W. WEBB COMPANY www.fwwebb.com18

Announcing the Release of the Tyco PRV2SIZE Pressure Relief Valve and Vent Sizing and Selection SoftwareA unique, comprehensive and easy-to-use program, it provides a thorough and integrated approach for sizing all types of pressure relief devices, including low pressure tank protection products as well as regulators, in a single sizing & selection platform.

The TYCO PRV2SIZE software incorporates over 135 years of experience and engineering expertise for an extensive array of Anderson Greenwood, Crosby and Varec pressure relief devices and related products in one software package. With the TYCO PRV2SIZE software, customers and engineers can address numerous applications in a single sizing and selection platform without the need to use two or more sizing programs. TYCO PRV2SIZE features include:Sizing-and-Selection• Pre-selection of units and sizing calculation methods• Inlet pressure loss input • Addition of 2:1 elliptical head tanks for fire sizing calculations• Multiple valve sizing • Tank blanketing regulator sizing and selection• Immediate flagging of errors against design constraintsRelated Calculations• Noise level calculations• Reaction force calculations• Combination device calculationsReport Generation• Improved tools to export and import device tag numbers, with the

capability to mail files directly from the software program• Ability to generate flow curves for Varec tank protection products• Attractive reports and specification sheets

Catalog Data• Catalog information for Anderson Greenwood pilot-operated,

direct spring-operated pressure relief valves and regulators, Crosby direct spring operated pressure relief valves and Varec tank protection products

• Catalog integration from existing product literature PDFs

Get a free mouse pad when you register to download the software! Go to: www.kentrol.com and click on this icon to get started!

Gary [email protected]

Cord [email protected]

after–hours emergency Service:207.872.4779

sevco.fwwebb.com

Call Cord or Gary with your questions.

Safety relief Valves800.452.1928207.873.7741

Specialists in Automated Valves, Process Controls,Overpressure Protection, and Engineered Systems.


ORDER DIRECTly ON-lINE!

VISIT: WWW.uSCOSuPPly.COM

Ask our Plastics Experts About System Joining Methods

Hand Socket Welder

W3500 Bench Socket 4 Shop 4 Miniplast

W2500 Shop 12 Shop SP 110S

Bench-style butt fusion tool for 1½” – 12” PP and PVDF welding.

Latest IR, non-contact fusion tool for sizes ½” – 4”. The unit has a touch screen and features automatic operation.

Many models of this hydraulic butt fusion tool for field/trench welding are available.

Socket fusion toll welds ½” – 2” pipe. Unit holds 2 sets of heater inserts.

For socket fusion welding of components from ½” – 4”. Selectable socket depth inserts.

Most compact butt fusion tool avilable for ½” – 4” straight or mitred welds.

Asahi/America single wall and double-containment thermoplastic piping systems are joined together using either socket or butt- fusion technology. A local fleet of joining equipment is main-tained, offering the latest in technology for socket, butt, and IR-butt fusion joining methods. We also offer field support and job start-up assistance. To ensure your next project goes smoothly, please call our plastics experts at 800.343.7555.

double-contained PiPeCorrosion-Resistant ThermoplasticDue-ProDue-Pro Leads the Market for Large, Flexible Systems• Any combination of PP, PVDF, Halar, or HDPE• Components joined by reliable thermal butt fusion• To 150 PSI pressure in carrier and containment• Accepts many leak detection and location systems• Field fabrication from components or pre-fabrication• Size ranges for all pressure or drainage systems• Supporting devices

on inner carrier pipe prevent sagging or buckling

• Containment piping can be compartmentalized, creating leak zones, and can be designed for continuous draining

high Purity SyStemS• Polypure™ = Natural Polypropylene• Purad™ = PVDFAsahi/America offers PolyPure and Purad products in sizes to fit your needs. For both large and small systems, Purad is available in a complete offering of ½” – 12”. PolyPure may be obtained in sizes of ½” – 4”. Both PolyPure and Purad fittings and valves are also available in zero dead leg configurations.In addition to piping, fittings and valves, Asahi/America’s Vortex Flow Meter is ideal for sanitary pharmaceutical and bio-chemical operations. The instrument has no moving parts and is crevice-free. It may be steam-sterilized and can be installed in Purified Water, Water for Injection, and Solution Preparation Systems.

Call us for your high purity needs!

19

Utilities Supply Company 98 Lindbergh Ave.

Methuen, MA 01844

Today’s thermoplastic piping systems can provide many different benefits over other materials. Some of these benefits include low total cost of ownership, excellent chemical resistance, improved flow characteristics, great insulating properties, and much more. That’s why it’s important to make sure when you’re considering a plastic piping system for any application, that it is approved for the application. When in doubt, please ask an expert! John Romano

Vice President, USCO

Contact Dave McGlynn or Ian Power at 800.343.7555

F.W. WEBB COMPANY www.fwwebb.com

Harvel announces the launch of EnviroKingUV™, a clear PVC piping that is suitable for exposure to sunlight. Unique UV blocking technology reduces harmful ultraviolet light wavelengths from penetrating the plastic while allowing beneficial wavelengths through. EnviroKingUV™ offers a cost-effective solution for photobioreactor tubing and other outdoor applications exposed to sunlight where transparency is required.

Harvel EnviroKingUV™ piping is produced from a unique, rigid, transparent PolyVinyl Chloride (PVC) compound with a Cell Classification of 11553 per ASTM D1784. This material, which shows a slight blue tint, has been specifically formulated to block damaging UV light. Harvel EnviroKingUV™ is patent pending.

“EnviroKingUV™ was developed to meet the demands of innovative technologies and emerging green industries,” says Bill Weaver, Harvel’s director of technical services. “It’s ideally suited for a wide range of outdoor applications including biofuel processing, carbon recycling, process R&D, filtration, and sight glass.”

Harvel EnviroKingUV™ possesses the well-known benefits of rigid PVC such as exceptional corrosion resistance; smooth interior walls for unimpeded flow and reduced sediment buildup; fast, reliable solvent-welded connections; good pressure-bearing capability; and ease of handling and installation, to name a few. All of these important attributes are now available in a unique transparent product with UV stability.

EnviroKingUV™ offers ideal solution for photobioreactor tubing and other outdoor applications

20

F.W. Webb Syracuse Receives Asahi/America Award for

Outstanding Sales Achievement

Accepting for F.W. Webb (left to right): John Romano, Vice President of Plastics Sales; Jessica Garvey, F.W. Webb Inside Sales; Joe Durning District Manager, Asahi/America; and Steve Perkey, F.W. Webb Outside Sales.

labwaSte™ chemical & corroSion reSiStant cPVc

uV reSiStant clear PVc PiPing

2551 magmeter Flow SenSor

One of the key advantages of LabWaste™ CPVC System is its excellent resistance to a broad range of corrosive environments. CPVC is inert to most mineral acids, bases, salts and aliphatic hydrocarbons, and compares favorably to other non-metals in these chemical environments.• Complete system of pipe, fittings

and adapters• All CPVC construction in full assort-

ment of standard DWV patterns

• Custom fabricated accessories-drains, neu-tralization tanks & pump stations

• Specially formulated one-step solvent ce-ment provides chemical resistance equal to system pipe & fittings – now in special Yellow color

• ULC flame & smoke rated • Non-pressure drainage service

to 220°F

Signet 2551 Magmeters offer many output options of frequency/digital (S3L), 4 to 20 mA or relays which are available on both the blind and display versions. The frequency or digital (S3L) sensor output can be used with Signet’s extensive line of flow instruments while the 4 to 20 mA output can be used for a direct input to PLCs, chart recorders, etc. Both the 4 to 20 mA output and digital (S3L) sensor interface is available for long distance signal transmission of up to 1,000 ft. Features• Bi–directional flow• Empty pipe detection• Installs into pipe sizes DN 15 to DN 300 (0.5 to 12 in.)• Flow rate range 0.05 to 10 m/s (0.15 to 33 ft/s)• Accurate measurement even in dirty liquids• Blind 4 to 20 mA, digital/frequency, relay output• Corrosion resistant materials; PP or

PVDF with SS, Hastelloy C, or Titanium

Utilities Supply Company 98 Lindbergh Ave., Methuen, MA 01844

Contact Dave McGlynn or Ian Power at 800.343.7555

The ALMATEC pump series BIOCOR is especially designed for sterile applications within the pharmaceutical, biotechnical and food industry. The air-operated diaphragm pumps are EHEDG certificated and ATEX conform according to 94/9/EG directive. BIOCOR pumps with a material combination of PTFE (diaphragms, ball valves, O-rings) equipped with a diaphragm monitoring are 3-A approved. The special design with the integrated cleaning-system enables the CIP (clean in place) and SIP (sterilization in place) capability.

Always a demand for sterile applications: all housing parts of the BIOCOR pumps show no horizontal areas. Each pump comes with four ball lifting magnets, which can be attached to the pump housing from the outside at the location of the four ball valves. The ball valves are risen up magnetically out of their seats and the pump is drained entirely without having to be dismounted. There are no mechanical ball lifters with parts and seals in the wetted area.

The two pump sizes B 20 and B 32 achieve max. capacities of 3.5 and 7.5 m³/h resp. a max. discharge pressure up to 7 bar The material for the wetted housing parts is electro polished SS 316 L (1.4435, according to Basel Standard II, ferrite content < 1%) with a surface roughness of < 0.4 µm. The center block is made of polyethylene conductive.

As a result of excessive use, shearing and damage can occur to equipment causing undetectable product contamination. Elasto-tech metal detectable elastomers can eliminate product recall, lower product loss and decrease the risk of elastomers consumed in finished product.

A common problem with component and filler parts is excessive wear and tear. When rubber breaks off a moving part it can migrate through your system and into your product. Searching for the locating fragmented rubber parts is a costly, time consuming and inconclusive process requiring expensive x-ray equipment, manual observation and an extensive maintenance program. Not locating a worn and lost rubber piece can have an even costlier outcome.

By manufacturing a standard elastomer with a metal impregnated compound, displaced rubber material can now be located by an in line detector. This alarm enables your system to instantly reject contaminated product.

Elasto-tech is available in Buna, FKM, Tuf-Steel, EPDM and Silicone.

Meets High Standards:

• Elastomers meet Title 21 CFR 177.2600• Tuf-Steel meets Title 21 CFR 177.1550• Meets USDA Hazard Analysis and Critical Controls Points• Detectable metal additive meets the latest revision of the Food

Chemicals Codex• Animal Derived Ingredient Free

Call Webb Bio-Pharm today for more information on Elasto-Tech Metal Detectable Elastomers or other gasket requirements you may have!

rubberFab elaSto-tech metal detectable elaStomerS

almatec – the biocor SerieS

Help Prevent Product Contamination with Cost Effective Solutions


Did you know Webb Bio-Pharm repairs pumps? We have a state of the art pump repair facility where we can fix a pump and run it on our pump stand to assure it meets original factory specifications. Call us today and try us out!Jim Bodle

General Manager

specialists in bioprocessing

components

877.932.2246 • 401.463.4176 • FAX: 401.463.4160Contact Jim Bodle • www.webbbiopharm.com

We are pleased to announce that Crane Company has made Webb Bio-Pharm the exclusive Crane Saunders Sanitary Diaphragm valve distributor in the New England Region. Webb Bio-Pharm is dedicated to the Sanitary Saunders product line and will continue to grow our partnership with the Crane Family. We are looking forward to our continued success with the Crane Saunders line!

For inquiries regarding this product line please contact our Webb Bio-Pharm team 401-463-4176!

Crane Company Appoints WEBB BIO-PHARM as the Exclusive CRANE SAuNDERS SANITARy DIAPHRAGM VAlVE Distributor in New England

t600 SerieS digital thermoStatThe thermostat replaces many competitive brands.The T600 digital programmable and non-programmable thermostats provide advanced temperature control and easy-to-follow menu-driven programming. All setup and programming is done at the push of a button by following plain text menus.The T600 is available in a 7-day, 2/4 event program-mable model or a non-programmable model. Each one offers at least 20 configurable parameters. They can control single-stage multi-state, and heat pump units. Plus, the programmable model controls uni-tary rooftop equipment with economizers.

Variable air Volume modular aSSemblyVMA1400 is a configurable digital controller with a pressure sensor and an actuator, housed in a pre-wired unit. Continuous loop tuning through algorithms, automated commissioning, position feedback for enhanced damper position accuracy, advanced diagnostics, N2 network communication and Palm Pilot interface.

direct couPled electric linear ValVe actuatorS

ML6421/7421 Non-Spring ReturnML6425/7425 Spring ReturnSuitable for use with on-off controllers/SPDT floating controllers or electronic modulating systems.

remote temPerature controllerS

T775 SeriesOffers the flexibility of up to four stages ON/OFF, modulating or reset control with digital display and wide set point range.

Single/dual tranSmitter inPut receiVer control

RKS1001

two PoSition actuatorMA-5300

SeriesMA-5200

Series

retroStat kitConverts existing pneumatic room thermostats to Powers 192 Series. Competitor retrostat kits have factory calibrated change-over pressure to match the manufacturer they replace.

Powermite 599 SerieSMZ Series:. Close-off up to 25 psi. Electronic actuators only 0 to 10V fail-in

place 24 Vac, 2-position, 3-position control. Low leakage rate (ANSI Class IV)

• World’s smallest footprint

• Standard copy/paste keypad (for copying parameters to other drives)

• external fan is removable with no screws (frames 4 & 5) & fan can be temperature controlled

• eMi/rfi filters & 3 % line reactors Standard local / remote button on keypad (1 – touch)

VSD SerieS

Please contact your F.W. Webb Sales Representative for more information!


At Webb, we recognize the challenges in today’s market and are leading to help our customers navigate through. With stricter regulations, product phase out, higher efficiency requirements, and federal, state and local rebates, look to Webb for our many products to meet all your needs. We thank you for you business and continued support.

HVAc/r & controls

800.253.7838 • 781.933.1804 • Fax: 781.933.3528John ThomasVice PresidentHVAC/R & Controls

York Millennium® Rooftops offer the flexibility to meet the requirements of a wide range of installations. They’re built to last and priced to com-pete. Numerous options can be added to the base unit to satisfy almost any specifications —from the simple to complex. Units are offered in the following combinations: • Cooling Only • Cooling/Gas Heating (Natural Gas or Propane) • Cooling/Electric Heat • Cooling/Hot Water Heat • Cool-ing/Steam Heat In addition, these units are designed with the flexibility to support the industry’s best practices for indoor air quality. All these features are available on 25, 30- and 40-ton single-package units that are easy to install, use, and maintain. Factory-installed options, such as econo-mizers, power exhaust, high-efficiency motors or filtration, barometric damper relief, 0° low ambient, high-capacity evaporator coils, and single-unit disconnect, add to the versatility of these self-contained rooftops.• Double-wall construction with galvanized sheet metal liner to

protect against microbial growth. • Rigid sheet metal inner liner to keep insulation out of the

airstream. • Sloped drain pan protects against pan corrosion

and bacterial growth.

• Pitched roof design for natural drainage. • Scroll compressors for efficiency and durability. Multiple

refrigeration circuits for greater turndown and the best unloading capabilities in the industry. connection for BAS compatibility.

• Extended flue connection on gas units to eliminate the possibility of corrosion in the furnace heat exchanger.

• Constant air volume or Variable air volume by inlet guide vanes or variable frequency drive.

• Full range of airflows and static pressures to meet most every application requirement.

Generac’s broad range of choices in automatic standby power allows you to choose enough protection to back up either a few essential circuits or your whole house or business. For 24/7 protection from power outages, trust the #1 selling automatic standby generator.

business is better with power.the new color of green is blue.

Variable reFrigerant Volume (VrV) SyStem

air-to-water heat PumPS, chillerS and Fan coilS

automatic Standby generatorS

Optimized R410A DesignThis industry benchmark is the world’s first R410A-operated variable refrigerant volume (VRV) system and represents a considerable advance in efficiency over competitive systems.❶➊ Aero Fitting Grille and Aero

Spiral Fan❷➊ DC Fab Motor❸➊ Sine Wave DC Converter

❹➊ E-Pass Heat Exchanger❺➊ Reluctance Brushless DC

CompressorThe motor comprises powerful neodymium magnets that generate the reluctance torque. These magnets are approximately 12 times stronger than ferrite magnets and contribute to its substantial energy-saving performance.

optimized R410a design: daiken sets the industry standard

❶

❷

❸

❹

❺

F.W. Webb is the exclusive distributor of York Heating and Cooling Systems and Source 1 Parts for New England and Upper New York.

F.W. Webb is the exclusive distributor of Aermec Air-to-Water Heating and Cooling Products in New England and New York.

large commercial rooFtoPS (y) 25, 30 and 40 ton

Features:• Less carbon, fossil fuel, LEED

points and operation costs• Fully integrated with pump,

storage tank, expansion tank and water filter

• Quietest fan coils in the world (whisper quiet library 26 decibels vs. 30 decibals)

• Pex, no copper piping• One system: First Stage: Solar

Thermal; Second Stage: Aermec; Third Stage: High Efficiency Boiler

• Easy start-up – purge and run• Application breadth: Heat, A/C,

Radiant, Free Cooling, Ice Melt• Water: No handling of refrigeration, no refrigeration in building, no leaks

For more information, please contact your F.W. Webb Sales Representative.


energy saving commercial equipmentHVAc/r & controls800.253.7838 • 781.933.1804 • Fax: 781.933.3528


york authorizeD factory parts800.253.7838 • 781.933.1804 • Fax: 781.933.3528HVAc/r & controls

Residential and Commercial ThermostatsSource 1 LX-Series Thermostats

Source 1 LX-Series thermostats are suitable for residential or commercial gas/electric, heat pump, multistage, and hydronic systems. They offer an extraordinarily rich set of features. A variety of matching accessories offer extended functionality to the dealer and the home or building owner. Features: • Large (4.7 sq in) digital display with soft white adjustable intensity backlight displays current indoor and outdoor (with optional

remote sensor) temperature, setpoints, day of week, and time • Adjustable scrolling10-character 16-element marquee text guides through setup and programming steps in plain language

and allows customizable service alerts and error messages • Bicolor LED mode indicator and backlit, color-coded soft-touch keys • Programmable models meet Energy Star and California Title 24 specifications • Up to 4 stages heating and 2 stages cooling • Up to 7-day installer selectable programming • Auto changeover (switchable to manual) • Built-in compressor protection (defeatable for zoning applications) • Adjustable timers and deadbands • Auxiliary heat indicator • Auxiliary heat lockout • Fahrenheit/Celsius display • Service filter reminder • UV lamp replacement reminder • Remote temperature sensor ready • Programmer compatible • Wireless accessories • Humidification and dehumidification (some models) • Dual fuel capable (some models) Specifications: Power Method: Hardwired Electrical Ratings: 24 VAC ±15% Frequency: 60Hz; 50Hz Terminal Load: Y1, Y2, G 1.5 A per terminal; all others 0.5 A per terminal Setpoint Temperature Range (heating): 35°– 99°F (1.5°–37°C) Setpoint Temperature Range (cooling): 35°– 99°F (1.5°–37°C) Deadband Differential: 1°–6°F (0.5°–3.0°C) Operating Ambient: 35°–105°F (1.5°–41°C) Operating Humidity: 5–90% RH, non-condensing Dimensions: 4-3/8” H x 5-5/16” W x 1” D Mounting: Horizontal

Residential ModelsSTAGES

SOURCE 1 PART NO. HEAT COOL PROGRAMMINGOPTIONS

CONTROL TERMINALS MLP $

S1-THSU21P1S • 2 1 1-DAY, NONE HEAT PUMP, GAS/ELECTRIC R, C, G, W1/O/B, W2, Y1,OUTDOORSENSOR,DRY CONTACT, FAULT

123.21

S1-THSU32P7S • 3 (4 FOR HEATPUMP) 2 7-DAY, 5+2 DAY,1-DAY,NONE

MULTI-STAGE HEAT PUMP, GAS/ELECTRIC R, C, G, W1/O/B,W2, W3, Y1, Y2,HUM,DEHUM, AUX,OUTDOOR

SENSOR,REMOTE SENSOR,DRYCONTACT, FAULT

185.71

S1-THSU32HP7S • 3 (4 FOR HEATPUMP) 2 7-DAY, 5+2 DAY,1-DAY,NONE

MULTI-STAGE HEATPUMP,GAS/ELECTRIC,HUMIDIFICATION,DEHUMIDIFICATION,REHEAT, AND DUAL

FUEL

R, C, G, W1/O/B,W2, W3, Y1, Y2,HUM,DEHUM, AUX,OUTDOOR


232.14

Note: Also available in York, Luxaire, and Coleman brands.

Commercial ModelsSTAGES

SOURCE 1 PART NO. HEAT COOL PROGRAMMINGOPTIONS

CONTROL TERMINALS MLP $

S1-TBSU22HNS • 2 2 NON-PROGRAMMABLE MULTI-STAGE HEAT PUMP,GAS/ELECTRICHUMIDIFICATION, DEHUMIDIFICATION

R, C, G, W1/O/B, W2,Y1, Y2, HUM,DEHUM,OUTDOOR SENSOR,DRY

CONTACT, FAULT

189.29

S1-TBSU32P7S • 3 (4 FOR HEATPUMP) 2 7-DAY, 5+1+1DAY,1-DAY, NONE

MULTI-STAGE HEAT PUMP,GAS/ELECTRIC R, C, G, W1/O/B,W2, W3, Y1,Y2,OUTDOOR SENSOR,REMOTESENSOR,DRY CONTACT, FAULT

196.43

S1-TBSU32HP7S • 3 (4 FOR HEATPUMP) 2 7-DAY, 5+1+1DAY,1-DAY, NONE

MULTI-STAGE HEATPUMP,GAS/ELECTRIC,HUMIDIFICATION,

DEHUMIDIFICATION,AND REHEAT

R, C, G, W1/O/B, W2,W3, Y1, Y2,AUX,HUM, DEHUM,OUTDOOR


239.29

Note: Also available in York, Luxaire, and Coleman brands.

• STOCKED NON STOCKED

HVAC SERVICE PARTS

24


deeP Vacuum PumP atlaS reFrigerant charging Scale

Standard chiller builder kit

If you need an easy–to–assemble, low side package that utilizes the smallest, most powerful, and most efficient chiller on the market, Standard Refrigeration’s Chiller Builder Kit is what you’re looking for.• Uses super compact TX chiller barrel• Brand name components• Single or dual circuit options• Available in ranges from two to 30 tons• Entire kit can be assembled in less than one

hour• NEW three and four circuit models!• Ideal for achieving up to 20 tons with single

phase compressors.• Chiller Barrel is now included.

DV-22NJB Industries’ Platinum™ Series Vacuum pump is the best pump in the industry. This pump was made and designed for the serious air conditioning and refrigeration technician. American made and subjected to JB’s rigorous performance standards, the Platinum™ Series is the top of the line for both quality and durability. Backed by an unprecedented **24 month over the counter warranty, there is no better pump on the market.

DS-20000JB is proud to introduce the new ATLAS refrigerant charging scale designed for the HVAC/R industry. Every day users will appreciate the advanced solid state load cell for superior sensitivity (.25 oz/10gm) and accuracy. The ATLAS’s 220lb (100kg) weight capacity, all metal scale construction, heavy duty plastic storage case, and hand held remote combine to make the ATLAS the best overall package in the HVAC/R industry today at a 110lb price.

25

781.272.6600 • fax: 781.275.3354Contact Kenan Young

refrigerationWith the phase out of Refrigerant R-22, there are many alternatives in the marketplace today. For help with selecting a long term replacement, please contact your F.W. Webb salesperson. As we move further into the refrigeration field, F.W. Webb has furnished many locations with a Sporlan Q bench to better serve you with your thermostatic expansion valve needs.

Kenan YoungProduct ManagerRefrigeration

Intellidyne, LLC is the market-leading manufacturer of green, energy-saving controls for commercial and

residential buildings. Our proven line of heating, air conditioning and refrigeration controls immediately reduces your heating and cooling energy consumption by at least 10%--guaranteed. We offer a complete line of controls for hydronic, steam and forced air heating systems, refrigeration systems and package/rooftop air conditioning units.

• UL listed U.S. and Canada, “Energy Management Equipment”

• Increased savings without replacing or upgrading costly systems

• State of the art microcomputer controller LED or LCD indicators show operating modes

• Simple installation by qualified installer• No programming or follow up visits required• Maximum efficiency year round• Reduces maintenance and extends equipment life• Fail safe operation• 15 year warranty for breakdowns or defects• 10-20% energy savings guaranteed• Short payback period

Residential Economizers also available.

IntelliCon®-CHS is a microprocessor-controlled, fuel-sav-ing device for commercial steam heating systems. Intelli-Con-CHS reduces: fuel consumption, wear on parts, fuel emissions and electrical usage, when installed on any new or existing gas or oil burner. IntelliCon-CHS saves energy by adjusting the burner run pattern to match the system’s “heat load.” Its action is similar to the industry-accepted method of “outdoor-air tempera-ture reset control,” but does not require an outdoor-air temperature sensor or the need to profile the building in order to adjust the “reset” controller properly. IntelliCon-CHS determines the “heat load” by using an eas-ily installed pressure sensor that monitors the boiler’s steam-pressure and the rate that this pressure is changing.

IntelliCon®-CAC typically reduces Commercial Air Conditioning electric consumption by 10% to 20% or more. The IntelliCon-CAC is a microprocessor-based, UL listed, electronic control that uses intelligent Dy-

namic Cycle Management (DCM) tech-nology to automatically adjust the com-pressor cycles to achieve the greatest efficiency and reduced electrical usage, while assuring consistent temperature levels. IntelliCon-CAC is maintenance free, easy to install by a qualified installer, and is guaranteed to save energy.

IntelliCon®-CHW is a microprocessor-controlled fuel-saving device for commercial hot-water heating systems. IntelliCon-CHW reduces: fuel consumption, wear on parts, flue emissions and electrical usage, when installed on any new or existing gas or oil burner.

IntelliCon®-RU will reduce electric con-sumption—typically 10% to 20%—when installed on commercial refrigeration/ freezer (refrigeration) systems. Intelli-

Con-RU represents a major advancement in refrigeration system energy-saving technology, unsurpassed in today’s commercial refrigeration marketplace. IntelliCon-RU is easily installed by a qualified installer, maintenance free and guaranteed to save energy.

CHS – Commercial Steam Heating System Fuel Economizer

CAC – Commercial Air Conditioning Electrical Consumption Economizer

CHW – Commercial Hot Water Heating System Fuel Economizer

RU – Refrigeration Unit Electrical Consumption

Economizer


Water and energy conservation continue to drive innovation in the development of new products in the plumbing and heating industry. Municipal buildings, hospitals and schools are welcoming “green” products that are consistent with their goals of sustainability.

institutional / Propertymanagement

Dean PlouffeProduct ManagerIndustrial Plumbing

781.272.6600 • fax: 781.275.3354Contact Dean Plouffe

Style BFK-7Sizes: 1½” – 8”Materials: Ductile Iron, Nickel Aluminum Bronze, Carbon Steel, 316 SS

Style KF-7Sizes: 10” – 12”Materials: Ductile Iron, Nickel Aluminum Bronze, Carbon Steel, 316 SS

Style KF-7Sizes: 1/2” – 12”Materials: Cast Iron

Available in threaded and flanged ¾” – 8” in materials of Cast Iron, Bronze, Carbon and Stainless Steel. We can fabricate to any size and material!

TYLOK ExPAnsiOn jOinT & indusTRiAL HOsE TRAininG

Style SSD-KSizes: ¼” – 3”Materials: Nickel Aluminum Bronze, Carbon Steel, 316 SS

Style KT-7Sizes: 3/8” – 3”Materials: Cast Iron

duPlex baSket StrainerS

knob-tyPe baSket StrainerS


industrial Specialties

Eddie Giacchino a salesman at F.W. Webb Company in Woburn who is very involved with community services and volunteering his time with local education wanted to have this platform for the kids in the tech schools.

“We had over 15 manufactures representative’s attended and sponsored the program with F.W. Webb Woburn. Eight schools bussed in students with a total of over 200 kids by the time it was over. They could interact with F.W. Webb employees, customers and manufactures. Learning to understand there roles in the industry, asking questions and even seeing first hand some of the latest in product and opportunities. It was well worth it, and we had a lot of fun.” - Ed Giacchino, Salesman F.W. Webb

There were also group tours of Webb’s Woburn facility with a Q&A forum with Webb’s management. It didn’t stop there! Immediately following was an outdoor barbecue for the kids.

“This is a great industry and these kids are the future of it. Along with install and service, there is also management, sales, manufacturing, purchasing, distribution, etc. They’re getting a lot of good information and seeing first hand the opportunities ahead of them. A trade show for the tech kids. They had a ball and so did we.” – Christopher DiPirro, G.M F.W. Webb

“Thanks for inviting our school, Northeast Metro Tech, to your career day at your Woburn location. My students enjoyed talking to everyone and the tour of the facilities. Again thanks for the invite and the BBQ lunch the kids enjoyed it!!!!” – Michael Zolotas Northeast Voc.school and long time Webb customer.

Chris DiPirro, General Manager of the Woburn branch, speaking to students from area Tech schools.

Tech school students and F.W. Webb staff. at the outdoor barbecue.

Eddie Giacchino, F.W. Webb salesman held this platform for the kids in the tech schools.

F.W. Webb Woburn Holds Trade show/Training day for Tech school students

Phoenix *Capitol domestically manufacturers a full line of forged steel fittings and unions along with branch connections marketed under Trans-O-Con. All Phoenix *Capitol products are produced to the latest ASME, ANSI and ASTM specifications and adhere to existing Approved Manufacturing Lists.

Forged Steel FittingS

FoR moRE inFoRmation, plEasE contact youR local F.W. WEbb salEs REpREsEntativE.

Steam Heat exchange Solutions

Brute 44 gal. Container / GrayCPFG264300

Brute Container Dolly / BlackCPFG264000

Multi-Surface Medium Duty BroomCPFGX40204

Heavy Duty 2-Shelf Utility CartCPFG452088


industrial Specialties

m18 hackzall kit

1¾” SdS max rotary hammer

m12 PVc Shear

clamP gun For hVac/r laSer temPerature gun

m12 no-hub driVer

2470-215426-21

2266-20

2455-22

• Powerful Mechanism – Cuts up to 2” schedule 40 PVC in 3 seconds

• Ultra sharp blade with Pierce Point – No burrs or shavings to remove

• Offset Blade – Cuts PVC / PEX in-wall, in-ground, or close to wall

• Quick Return Blade – Increased productivity during repetitive cuts

• All Metal Planetary Drive – Delivers over 200 cuts per charge

• Stainless Steel Blade and Aluminum Jaw

• Surface Temperature Measurement from -20 to 932°F (-30 to 500°C)

• 12:1 Distance to Spot Ratio • User configurable Hi/Low

alarm settings • K-type thermocouple input

for contact temperature • Hold, Max Value Functions • Slide rail for mounting 2201 Voltage

Detector with Work Light • 0.95 fixed emissivity

• Measures up to 600 amps AC, large 1.30” jaw opening

• Thin Jaw Profile for easier wire measurement in panels or in bundles

• Wide Voltage range to 600 AC/DC volts

• True-RMS for accurate measure-ment in all applications

• Built-In Voltage Detector and LED Work Light

• Specific torque settings for 60 and 80 in-lbs

• Auto shut-off w/LED indicator

• LED calibration indicator• 0-750 RPM drill mode• M12 Lithion Ion battery pack• Compact lightweight design

2625-21

k-45 & k-45aF drain cleaning machineSThe K-45 family of drain guns are the professional’s choice for cleaning small secondary drain lines from ¾” to 2½”. Available in manual and AUTOFEED versions, each provide you with:• Variable Speed Operation – Fully variable from 0-600 RPM to give you

complete control in every situation• Leak Proof – Inner drum prevents leakage to keep job site clean• Other Features: – Quick acting slide chuck to lock cable. – Inner drum design virtually eliminates cable flip-over in the

drum and allows for quick cable change out – Premium quality, compression wound inner core cable combines

strength and flexibility to resist kinkingK-45AF – AUTOFEEDThe Advanced 2-Way AUTOFEED lets you clean drains better and faster than ever before – keeps hands off cable and gives you total control to completely work through blockages and retrieve obstructions.• Reduce Job Time by 15% – Advance and retrieve cable without stopping to

reverse the motor• Better Results – Quickly work back and forth through the blockage to

completely clear the line.SpecificationsMotor Rating...............120V, single phase, AC, 3.2 amp, 50/60 Hz.Operating Speed……………0-600 RPMDrain Line Capacity………..¾” – 2½”Drum Capacity………..50’ of 5/16” 35’ of 3/8”Weight w/C-1IC Cable…………12.6 LBS (K-45) 13.8 LBS (K-45AF)

• 14 Amp, 1.300 MWO motor that provides optimal power for the toughest concrete drilling and demolition applications

• 8.8 ft/lbs of impact energy combined with 450 RPM and 2,840 BPM, this hammer delivers fast drilling and hard hitting performance

• AVS Anti-Vibration System, mechanical clutch, and advanced electronics provide ease of use and overall long-term durability for the user

• One-handed design provides superior control and versatility over a standard reciprocating saw

• Compact size allows for cutting in tight spaces, and light weight makes overhead work easier

• QUIK-LOK® Blade Clamp offers fast, easy tool free blade changes for SAWZALL® Blades & HACKZALL® Blades

• Built-In LED light illuminates the work surface while cutting

2236-20


tools

Features:• snap and turn for quick, easy cuts on

copper tubing• spring-loaded cutter wheel self-feeds with

consistent pressure as the tool is turned around the tubing

• great for low clearance areas since the compact c-shape requires no handle swing space

• replaceable cutter wheel

Pipe Capacity: Nominal in 1", 1/2" and 3/4"

SPring-loADeD tuBing cutterSeveryone needs a handy cutter (or two) like reed’s spring-loaded tubing cutters. this easy-to-grip cutter easily snaps on to copper tubing for a quick, clean cut.


tools/Safety


Safety

Place Orders • Get Pricing • Check Inventory Evaluate Heat Loss/Gain • E-mail

Through www.fwwebb.com to WebbConnect, you can:

MAINEAugusta 800-322-4700Bangor 800-432-7371Biddeford 800-443-0505Caribou 800-339-3029Ellsworth 888-882-9322Lewiston 800-252-2000S. Portland 800-482-0791Rockland 800-287-0015West Bath 800-427-7990Winslow F. W. Webb 800-640-9322 Kennebec Supply Kentrol/Sevco 800-533-1172

RHODE ISLANDCranston 800-795-6390Webb Pump 866-850-7867Webb Bio-Pharm 877-932-2246Warwick 888-225-6850

New Bedford Babbitt 888-354-0048Northampton 800-282-7721 Pittsfield 800-578-9322Plymouth 508-830-0125Salem 800-345-5025Springfield 800-660-3141Sturbridge - Pipe Depot 508-347-3342Woburn 800-253-7838

NEW HAMPSHIREConcord 888.508.0050Dover 800-582-7196Exeter 888-993-9322Gilford 800-345-1771Keene 800-235-1218Lebanon 800-322-8707Madison 800-852-9203Manchester 800-789-6488Nashua 800-462-1440

MASSACHUSETTSAuburn 800-872-0211Bedford 800-221-9322Bellingham 508-966-4999Boston 617-482-8387Brockton 800-544-9322Canton 781-828-5559Dedham 800-820-9322Fitchburg 800-322-0899Gloucester 978-283-7800Greenfield 800-564-3644Haverhill 800-521-7499Hingham 781-749-9322Hyannis 800-352-3159Lowell 800-642-9322Malden 800-963-7111Methuen 866-548-9322Utilities Supply 800-343-7555

NEW YORKAlbany 800-432-9322Binghamton 888-593-9322Cazenovia 315-655-9700Clyde 800-828-8824Newburgh 877.494.9322Plattsburgh 800-622-9322Queensbury 800-826-0326Syracuse 800-262-9222Utica 315-724-3191

CONNECTICUTFranklin 888-642-9086Hartford 800-252-9322Hartford – Victor 800-243-9360New Haven 800-636-7524Waterbury 800-572-6479

VERMONTBarre 800-244-5044 Bennington 800-821-9506Brattleboro 800-821-9511Rutland 800-622-4365Springfield 800-872-5303St. Albans 800-696-3763St. Johnsbury 800-872-8028Williston 800-696-0340

F.W. WEBB COMPANY160 Middlesex TurnpikeBedford, MA 01730www.fwwebb.com

F. W. Webb is a participant in American Express’s Corporate Procurement Card Program.

We Honor:

F. W. Webb Company is in no way responsible for any printing errors, omissions or typos in the WinSheet.

PresortedStandard

US Postage PaidPermit No. 12Bedford, MA

73 Convenient Locations

F.W. Webb is a member of the following associations: A-D (Affiliated Distributors), ISPE, TAPPI, NECCARAPA, MCAA and MHEC.

For questions or comments, please email Carol Rosinski (Production Manager) at [email protected].

John Pope, CEO • [email protected] Jeff Pope, President • [email protected]

10 Reasons To Do Business With F.W. WEBB1. We Care.2. Our relationship with our customers matters most.3. The profitability of your enterprise is priority one.4. If on occasion our quality products cost more, they will be worth it.5. The manufacturers that we represent share our values and commitments.6. No order is worth more than our or your reputation.7. To insure that when you ask, “What’s new?” we have the answers.8. Product application is prioritized by safety considerations over price.9. Our people are accessible, accountable and trained to respond reliably every time.10. Webb is a privately owned company which means that the buck stops here.

Thank You!

WinSheet - Summer 2010

Documents

Transcript of WinSheet - Summer 2010