WiFi Camera (NETCAM)

Installation Manual

iPhone IOS

Android

PC Client available on www.netcam360.com

iPhone IOS

Smart Phone

Installation

AP (Access Point) installation (with or without WiFi

Network)

1. Open Apple App Store, search, download, and install

NetCam

2. Connect the power cable to the camera and place the camera

“right next” to your WiFi router.

Camera sound: "Welcome to use"

3. Press and hold the reset button on the back of the camera

until you hear the following sound:.

Camera sound: "Successfully Reset"

Camera sound: "Welcome to use"

4. On your phone, go to Settings -> WLAN and connect to the

WiFi network that starts with XLT. For example

XLT-023107-XNWCM. This is your camera access point.

5. Open the app NetCam and click “Add device”

6. Your phone has to be connected to the camera access point.

On the following screen, click “LAN search.”

7. When your phone successfully connects to the camera, you

will see your camera on the “Search device” list as follow.

Click on the WIFICAM to add the device.

Click “Done” on the following screen:

8. Now your camera is setup to connect directly to your phone

and can only be accessed when your phone is near the

camera access point signal. To configure your camera to your

WiFi network, please place the camera next to your WiFi

router, continue the following steps.

9. On the “Device list,” click on the settings icon:

10. On the Setting screen, click on WI-FI setting

11. On the WI-FI setting screen, click on “Manage WI-FI

network.” Available networks will populate on the screen.

12. Choose your WiFi network and type in your WiFi

password and press return. Then click “Done” at the very top.

The camera will then reset and attempt to connect to your

WiFi when it restarts.

Camera sound: “Welcome to use”

13. Successfully Installed

Android

Smart Phone

Installation

AP (Access Point) installation

(with or without WiFi Network)

1. Open Google Play Store, search, download, and install

NetCam

2. Connect the power cable to the camera and place the camera

“right next” to your WiFi router.

Camera sound: "Welcome to use"

3. Press and hold the reset button on the back of the camera

until you hear the following sound:.

Camera sound: "Successfully Reset"

Camera sound: "Welcome to use"

4. On your phone, go to Settings -> WLAN and connect to the

WiFi network that starts with XLT. For example

XLT-023107-XNWCM. This is your camera access point.

5. Open the app NetCam and click “Add device”

6. Your phone has to be connected to the camera access point.

On the following screen, click “Search device in Lan.”

7. When your phone successfully connects to the camera, you

will see your camera on the “Search Result” list as follow.

Click on the WIFICAM to add the device.

Click “Done” on the following screen:

8. Now your camera is setup to connect directly to your phone

and can only be accessed when your phone is near the

camera access point signal. To configure your camera to your

WiFi network, please place the camera next to your WiFi

router, continue the following steps.

9. On the “Devices” screen, click on the settings icon:

10. On the Setting screen, click on WI-FI setting

11. On the WI-FI setting screen, click on “Local WiFi

Manager.” Available networks will populate on the screen.

12. Choose your WiFi network and type in your WiFi

password and press return. Then click “Done” at the very top.

The camera will then reset and attempt to connect to your

WiFi when it restarts.

Camera sound: “Welcome to use”

13. Successfully Installed