Weicco India Hangers

download Weicco India Hangers

of 4

Embed Size (px)

Transcript of Weicco India Hangers

  • 7/24/2019 Weicco India Hangers

    1/4

    Recommended for suspension of plain

    or

    insulated

    stationary

    piping. Design provides key benefit of

    substantial

    level

    adjustability

    after installation. WEICCO offers special intermediate s izes to sui t any

    insulated

    pipe 00

    Selection Ordering

    For insulated pipe, please specify effective or pipe

    size plus insulation thickness. Standard (as below) or

    intermediate models will

    be

    selected as appropriate.

    Where WEICCO Rubber Support Inserts (RSI) are

    used, specifying matching WCH hangers will suffice.

    Product

    Features

    WCH hangers allow vertical level

    adjustment

    of 20 to

    150mm (based on hanger size) after pipe installation.

    This helps

    in

    effective leveling of piping systems.

    Besides the table below, we offer intermediate sizes

    designed to closely fit the effective pipe for any

    insulation thickness. This enhances installation quality

    by avoiding usage of oversize hangers.

    Available EPDM

    lined

    - to prevent contact between

    dissimilar materials (if used with non-ferrous pipe),

    minimise condensation and provide noise attenuation.

    Lining has a temperature range of -20C to 110C.

    o

    (BDLT STUD)

    - U-STRAP

    :

    -e-

  • 7/24/2019 Weicco India Hangers

    2/4

    Adjustable swivel ring type steel

    band

    hangers suitable fo r

    suspension

    of all types

    of

    stationary pipes.

    Most

    commonly used for sprinkler system pipelines. Supplied complete

    with

    swivel nut.

    Product

    Features

    Knurled

    swivel

    nu t

    facilitates easy installation

    and vertical adjustment of pipe level post

    installation.

    Lips are dimpled at bends for models WPCS 48

    and above, for added strength.

    Swivel nuts are

    countersunk

    to prevent burring

    or damage to threads.

    Also available with EPDM

    Lining

    which:

    - eliminates contact between dissimilar materials

    when clamps are used with non-ferrous pipe

    - provides acoustic attenuation by minimizing

    transmission of high frequencies from piping to

    building structure

    - acts as a thermal barrier

    - has a temperature range of -20C to

    11 DoC

    Threaded Rod (by others)

    Material:

    Finish:

    Options:

    Steel

    Electrogalvanised post manufacture

    EPOM Lined (suffix R )

    Epoxy Powder Coated finish (suffix P )

    Hot Dip Galvanised finish (suffix HOG )

    Stainless Steel construction (suffix SS )

    Standard Sprinkler

    Pipe Hanger (WPCS)

    us

    EPDM

    lined Sprinkler

    Pipe Hanger (WPCS.R)

    Underwriters Laboratories listed fo r sizes to 8 .

    Compliance - US Standards MSS-SP58 (Type 10),

    MSS-SP69; EG

    to

    ASTM 8633 SC3, 8S1706 FE/ZN12

    SELECTION TABLE

    FOR

    SPRINKLER

    PIPE

    HANGERS

    Model Steel Pipe

    Swivel Nut

    Max.

    Nominal Size (mm)

    Load (Kg)

    WPCS 28

    M10

    61

    150

    WPCS 35

    1

    M10 68

    150

    WPCS42

    1 1.

    M10 75

    150

    WPCS48

    1y,

    M10 81 150

    WPCS60

    2

    M10 100

    150

    WPCS 76 Y

    M10

    120 225

    WPCS90 3

    M10 135

    225

    WPCS 115

    4 M10 165 225

    WPCS 140

    5 M12 195 300

    WPCS 165 6

    M12

    230 300

    WPCS 220

    8

    M12 290

    450

    www.weicco.com

    rodu t speoficarions are subject to changeWIthout pnor notice

    WPCS 1A3013

    MOODY

    < N_TERNA_TIO_NAL ISO 9001 :2008

  • 7/24/2019 Weicco India Hangers

    3/4

    Heavy

    duty

    U Bolts

    designed

    to grip, guide or

    support

    plain and insulated pipes.

    Selection I

    Ordering

    Intermediate U-Bolt models are available, suitable

    for any insulated pipe 00 Please specify effective

    pipe

    00

    or pipe size plus insulation thickness.

    Where WEICCO Rubber Support Inserts (RSI) are

    used, specifying 'matching U-Bolts' will suffice.

    If EPOM sleeved U-Bolts are required, specify pipe

    ODs to enable selection of suitable models.

    Application as guide for

    vertical insulated pipe

    Application for suspension

    of

    horizontal insulated pipe

    D

    Compliance - US Standards MSS-SP58 (Type 24),

    MSS-SP69; EG to ASTM

    8633

    SC3,

    8S1706

    FE/ZN12

    Application as grip for

    horizontal insulated pipe

    H

    A : r

    Steel

    Electrogalvanised post manufacture

    U-Bolt with EPOM sleeve (suffix 'R')

    Epoxy Powder Coated finish (suffix 'P')

    Hot Dip Galvanised finish (suffix 'HOG')

    Stainless Steel construction (suffix 'SS')

    Brass construction (suffix 'BR')

    Product Features

    Supplied complete with four nuts

    Besides models listed

    in

    the table below, a full range

    of intermediate sizes is available to match the ODs

    of WEICCO RSI, providing a simple and effective

    support solution for insulated pipe.

    WEICCO U-Bolts are available with EPDM sleeve,

    to prevent contact between dissimilar materials when

    used with copper, plastic, aluminum or glass pipe.

    Material:

    Finish:

    Options:

    SELECTION TABLE

    FOR U BOLTS

    Model

    Steel Pipe

    Dimensions (mm)

    Max Suspended

    Nominal

    A H D

    TL (Thread Length) Load (Kg)

    us

    22

    29 42 6 25

    2

    US 28

    35 48 6 25

    2

    US

    35

    1

    42 54

    6

    25

    2

    US

    42 1

    y.

    49 62

    6

    25 2 Q

    US

    48

    1Y

    58

    75

    8 35

    45

    US

    6

    2

    7 87 8 35

    45

    US 75 2Y

    86 1 3

    8

    35

    45

    US9

    3

    1 2 122 1 45 7

    US 115

    4

    127 148 1 45

    7

    US

    142

    5

    156

    18 12 5

    1 5

    US 167 6

    182 2 5 12 5 1 5

    US219

    8

    234

    26

    12

    5

    1 5

    US 273

    1

    291

    324

    16 7

    2

    US

    323

    12

    342

    375 16 7

    2

    US

    356 14

    374

    4 7 16

    7

    2

    US

    4 6

    16

    425 458

    16 7

    2

    US

    456

    18

    479 522 2 85 3

    US 5 8

    2

    532 573

    2

    85

    3

    US

    559 22

    583 624 2 85 3

    US

    61

    24

    634 675

    2

    85 3

    US

    66

    26

    688 738

    24

    1 45

    US 71 28

    74 789

    24

    1 45

    US

    762

    3

    791 84 24

    1

    45

    US 915 36

    995

    24

    1 45

    Stockist:

    US 1C6512

    I

    MOODY

    Producr specifications are subJect to change \\ithout

    pnor

    notice

    INT RN TION L

    l

    ISO 9 1 :2 8

  • 7/24/2019 Weicco India Hangers

    4/4

    Ductile iron C-c1amp designed for providing attachment of threaded rod to steel

    beams

    or purlins,

    without

    the

    need for drilling or welding. WEICCO WBC is suitable for installation at both upper and lower flanges of beams.

    Model Max. Rod

    Standard

    Size

    Lengths (mm)

    BCRS 1 M12

    25 35 45

    BCRS2 M20

    25 35 45

    BCRS3 M24

    25 35 45

    Compliance - US Standard MSSSP127;

    EG

    to ASTM 8633 SC3, 8S1706 FE/ZN12

    Material: Steel

    Finish: Electrogalvanised post manufacture

    Retaining Strap

    BCRS Retaining Strap, available as an optional

    extra, provides additional installation safety by

    preventing horizontal slippage of the clamp.

    May

    be

    ordered by specifying strap model and

    length required. The length selected should

    be

    appx. 120mm more than width of beam flange.

    Retaining Strap

    (optional)

    Retaining Strap

    (optional)

    Set screw

    Compliance

    US

    Standards MSS-SP58 (Type 19 23),

    MSS-SP69; EG to ASTM 8633 SC3, 8S1706 FE/ZN12

    Material: Ductile Iron

    Finish: Electrogalvanised

    Product

    Features

    Suitable for use with I-beams, channels, angles or

    steel roof purlins with up to 22mm flange thickness.

    Suitable for threaded

    rod

    sizes from 1Omm to 24mm.

    Convenient means

    of

    suspending pipelines, ducting,

    false ceilings or equipment from structural members,

    without the need for drilling or welding.

    Permit vertical level adjustment post installation.

    WBC clamps are denoted as universal on account of

    their versatile design, which provides a single product

    solution for various application situations.

    a) They can

    be

    attached to either the upper or lower

    horizontal flanges

    of

    beams.

    b The threaded suspension rod may either be fixed

    offset from the edge of the flange or directly under

    and inline with the set screw.

    The deep throat design ofWBC clamps helps ensure

    an

    effective grip on the beam flange.

    Supplied complete with hardened set screw, lock-nut.

    WBC are suitable for applications requiring seismic

    restraint when used along with BCRS retaining straps.

    Typical Application

    SELECTION TABLE FOR UNIVERSAL C-TVPE BEAM CLAMPS

    Model

    Dimensions (mm)

    Torque*

    Max.

    1

    A

    8

    C E

    (kgcm)

    Load (Kg)

    WBC 10

    M10

    41

    54

    16

    19

    69

    35

    WBC 12

    13

    M12

    41 54 16 19

    69

    35

    WBC

    16

    17

    M16

    51

    73 19

    20 288

    510

    WBC2

    21 M20 51

    73 19

    20

    288

    510

    WBC22 23

    M22

    57 87

    21

    22

    288

    68

    WBC24

    25

    M24

    57 87 21

    22 288

    68

    * Maximum recommended set screw torque

    Stockist:

    rodu t

    specifications are subject change without paOt notice

    WBC 1J0509

    MOODY

    L NTERNA

    ClNAL

    ISO 9 1 :2