WaterCAD V8 XM EditionWaterCAD V8 XM Edition

Water• WaterGEMS

• WaterCAD

• HAMMER

• SCADAConnect

Sewer• SewerGEMS

• SewerCAD

Storm• CivilStorm

• PondPack

• StormCAD

• CulvertMaster

• FlowMaster

Haestad Methods Solutions

Bentley Product Portfolio

Water Modeling Firsts

• 1983: KYPIPE – 1st IBM-PC fully capable implementation of the mainframe solution for water distribution modeling

• 1991: Cybernet – 1st AutoCAD-based water distribution modeling solution

• 1996: WaterCAD – 1st commercial Windows stand-alone water distribution modeling solution

• 2002: WaterGEMS – 1st ArcGIS 8x water distribution modeling solution

• 2006: WaterGEMS V8 XM Edition – 1st MicroStation water distribution modeling solution

• And: WaterGEMS V8 XM Edition – 1st fully unified cross-platform water distribution modeling solution

WaterGEMS V8XM Edition

WindowsStand-alone

LoadBuilder

Terrain Extraction (TRex)

ModelBuilder

AutoCADplatform

Darwin Calibrator

Darwin Designer

Skelebrator

MicroStationplatform

ArcGIS platform

WaterCAD & WaterGEMS

WaterCAD V8XM Edition

Available

Add-ons

Included

HAMMER and SCADAConnect – Available Add-on

WaterCADWater distribution design and modelingAutomated fire flow analysis

Source trace and water age analysis

Easy-to-use native layout tools

Active topology alternatives

Variable speed pumping

Constituent water quality analysis

Drawing review tools

System head & hydrant curves

Tank mixing models

Rule-based & logical controls

Elevation Extraction (AutoCAD version)

Leakage and sprinkler modeling

Capital cost & energy analysis

Comprehensive demand management

Unidirectional flushing modeling

Shapefile synchronized connections

CAD to model automated conversion

Statistical result analysis

Persistent database connections

Scaled and schematic layout

Sub model management

Multi layer backgrounds for model layout

Integration with HAMMER for transient analysis

Animated pump and head loss curves

• Stand-Alone, Microstation and AutoCAD environments

• Quick model building from any data source

• Easy-to-use layout and editing tools

• Unrivaled hydraulic analysis features

• Stunning result presentation tools

WaterCAD Features

• Steady-State Analysis• Extended-Period Simulation (EPS)• Constituent-Concentration Analysis• Source Tracing• Criticality Analysis• Tank-Mixing Analysis• Water-Age Analysis• Fire-Flow Analysis• Variable-Speed Pumping• Pressure-Dependent Demands• Scenario Modeling-Based Unidirectional Flushing

Easy-to-use Interface

WaterCAD V8 XM Edition

WaterGEMS V8 XM EditionArcGIS interface shown

• Stand-alone interface• MicroStation interface• AutoCAD interface (add on)• Multi background-layer support• CAD, GIS & Database• Unlimited undo and redo• Scaled, schematic & hybrid

environments• Element morphing, splitting &

reconnection• Element prototypes• Aerial view and dynamic zooming• Named views

Model Building

• Model Builder – Build your model from any external data source

• TRex – Extract Elevations from multiple digital formats• LoadBuilder – Add demands to your system using one of

several demand allocation features

Scenarios Management

• Calculate multiple “What if” situations• Alternatives• Parent child relationship

Reporting Results

• Reports• Tabular Reports w/ Flex Tables• Profiles• Contouring• Thematic Mapping• Property-Based Annotation• Property-Based Color Coding and Symbology

WaterCAD Modules

0.0

20.0

40.0

60.0

80.0

100.0

120.0

140.0

160.0

180.0

0.0 40.0 80.0 120.0 160.0

1:1 CorrelationFlow Test 1Flow Test 2Flow Test 3

Darwin CalibratorAutomated model calibration

Darwin DesignerOptimized and automated network design.

SkelebratorHydraulic-smart network reduction

HAMMERWater Surge and Transient An

Available for WaterCAD

Included with WaterGEMS

0.0

20.0

40.0

60.0

80.0

100.0

120.0

140.0

160.0

180.0

0.0 40.0 80.0 120.0 160.0

1:1 CorrelationFlow Test 1Flow Test 2Flow Test 3

Darwin CalibratorAutomated calibration

Streamline the time-consuming model calibration

process and make sure your decisions are based

on a model that truly reflects the real world.

1. Enter multiple field measurements for calibration

2. Let Darwin generate millions of possible solutions

3. Create a calibrated model using optimum values for

pipe roughness, junction demands and element status

Darwin DesignerAutomated design

Evaluate thousands of design and rehabilitation

alternatives that meet your hydraulic constraints,

maximizing hydraulic performance and savings

to your Capital Investment Program (CIP).

1. Enter design requirements (Max./Min. pressures & velocities)

2. Assign cost tables or functions

3. Determine optimization objective (Cost, benefit or trade-of)

4. Let Darwin find thousands of valid design solutions

5. Choose an optimum solution for implementation

HAMMERTransient analysis and water hammer modeling

Prevent system damage

Develop cost-effective surge control strategies

Trim construction and O&M budgets

Model any surge protection device

Minimize wear and tear on pipes

Simulate any transient condition

Design and operate with greater reliability

Eliminate costly over design

Ensure the longevity of your water system

Prepare for power failures

Protect your operators

Improve water quality

Minimize service interruptions

• Avoid catastrophic failure of pipes & equipment

• Use the rigorous Method of Characteristics

• Model any transient event

• Simulate any surge protection device

• Complete integration with WaterGEMS/CAD

References• There are currently over 40,000 seats of Haestad Methods

water distribution modeling products in use today. • The largest municipalities in the US and the world use

Haestad Methods water distribution software including:

New York City, NY Phoenix, AZ St Louis, MO

Baltimore, MD Washington, DC Gwinnett County, GA

Anne Arundel County, MD

Tacoma, WA Tucson, AZ

Tampa, FL American Water, US Brisbane, Australia

United Water, US Athens, Greece Beijing, China

SELECT Benefits

• Network License • 24 x 7 Technical Support

− Live Meeting Assistance

• New versions! Plus updates• Access to knowledgebase• Home-use license

ConclusionWhy Choose Bentley’s Haestad Solutions?

• 27 Years Experience

• Large R&D Staff

• Offer Full Suite of Software:

−Water - Sewer - Stormwater

• Common Interfaces

• CAD, GIS, or Stand Alone

• More new versions & features

• Many Users = Higher Quality Software

• New Releases = Higher Productivity

Client Feedback Here’s what they say about Haestad methods….

“Haestad Methods is a first class organization, and they really took an interest in ensuring

that we were getting the most out of using our WaterGEMS software.”

Texarkana Water Utilities

“The software helped the students bridge the gap between the principles they learned in

earlier courses and real projects they can see every day driving to school.”

Mississippi State University

“Our WaterCAD model gave us an excellent understanding of our system, so we were able

to make good decisions and have a fast reaction time.”

Los Alamos County Utilities

“Using scenarios and reporting tools, SewerCAD was able to thematically display the

hotspots in the system. Then, the automated design tools let us develop augmentations to

resolve the bottlenecks. It was a real time saver for us.”

Brisbane Water (Australia)

“Haestad Methods should be commended for putting together a workshop of this quality.

This course should be mandatory for anyone modeling water systems.”

Advanced Engineering

“Using your product has helped us to quickly and accurately review various alternatives, so

we may provide our customers with a quality yet economical design.”

RDK Engineering Inc

“Technical software is only as good as its technical support-Haestad excels at both.”

Elliot & GarverBentley Systems serves hundreds-of-thousands of clients worldwide. This presentation represented only a small portion of client feedback.

WaterCAD V8 XM EditionWaterCAD V8 XM Edition