UTTAR PRADESH RAJYA VIDYUT UTPADAN … PRADESH RAJYA VIDYUT UTPADAN NIGAM LTD. (A UP Government...

28
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LTD. (A UP Government Undertaking) TENDER AND CONTRACT DOCUMENT FOR Name of Work: SIGNALLING AND TELECOMMUNICATION WORKS INCLUDING SUPPLY & INSTALLATION IN CONNECTION WITH AUGMENTATAION OF RAIL INFRASTRUCTURE FACILITIES FOR HARDUAGANJ THERMAL POWER STATION AT KASIMPUR, DISTT: ALIGARH, UTTAR PRADESH. IFB No.: 16/PPMM/CE(C)/H/11-12 PART 2- FINANCIAL BID Name of Tenderer: Address of Tenderer: Tender Document issued to: Signature of officer issuing the document with Designation and date of issue: Consultants for the Work: RITES LIMITED (A Government of India Enterprise) REGIONAL PROJECT OFFICE, 13 KM, NH24, Sitapur Road, Lucknow227208 Phone : 05222734894, 2734895 Fax No.: 05222734893 Email: [email protected]

Transcript of UTTAR PRADESH RAJYA VIDYUT UTPADAN … PRADESH RAJYA VIDYUT UTPADAN NIGAM LTD. (A UP Government...

 

 

UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LTD. 

(A UP Government Undertaking) 

TENDER AND CONTRACT DOCUMENT

FOR Name of Work: SIGNALLING AND TELECOMMUNICATION WORKS INCLUDING SUPPLY & INSTALLATION IN

CONNECTION WITH AUGMENTATAION OF RAIL INFRASTRUCTURE FACILITIES FOR HARDUAGANJ THERMAL POWER STATION AT KASIMPUR, DISTT: ALIGARH, UTTAR PRADESH.

      IFB No.: 16/PPMM/CE(C)/H/11-12

PART 2- FINANCIAL BID

Name of Tenderer:

Address of Tenderer:

Tender Document issued to:

Signature of officer issuing the document with Designation and date of issue:

Consultants for the Work: RITES LIMITED (A Government of India Enterprise) REGIONAL PROJECT OFFICE,  13 KM, NH‐24, Sitapur Road,  

Lucknow‐227208 Phone  : 0522‐2734894, 2734895 Fax No.: 0522‐2734893 

      E‐mail: [email protected]

PART-2 FINANCIAL BID

NAME OF WORK: SIGNALLING AND TELECOMMUNICATION WORKS INCLUDING SUPPLY & INSTALLATION IN

CONNECTION WITH AUGMENTATAION OF RAIL INFRASTRUCTURE FACILITIES FOR HARDUAGANJ THERMAL POWER STATION AT KASIMPUR, DISTT: ALIGARH, UTTAR PRADESH.

POINTS TO BE NOTED WHILE QUOTING RATES:    

1. The work to be carried out under this contract shall, except as otherwise provided in these conditions, include all labour, materials, tools, plants, equipment and transport which may be required in the full and entire execution and completion of works. The description given in the schedule of Quantities shall, unless otherwise stated, be held to include wastage of materials, carriage and cartage, carrying  in return of empties, hoisting, setting, fitting  and fixing in position and all other labour necessary in and for the full and entire execution and completion as aforesaid in accordance with good practice and recognised principles.

2. Sales‐tax/VAT (expect Service Tax), purchase tax, turnover tax or any other tax/ Cess on material, labour, construction and Works in respect of this Contract shall be payable by the Contractor and the Employer / Owner will not entertain any claim whatsoever in respect of the same. However, in respect of Service Tax, same shall be paid by  the contractor  to  the concerned department on demand and  it will be  reimbursed  to him by  the Engineer‐in‐Charge after satisfying it has been actually and genuinely paid by the Contractor.

3. Only percentage rates are to be quoted (above or below) for all the schedules in this financial Bid.

TENDER No.16/PPMM/CE(C)/H/11-12

(+) or (-) in Figures Plus or minus (in Words)

1 SIGNALLING AND TELECOM WORKS(SUPPLY) 46936821

2 SIGNALLING AND TELECOM WORKS(EXECUTION) 4655791

3 TELECOMMUNICATION WORK 1704803

(ii) In Words

(i) Signature of Authorized signatory of Tenderer

(ii) Name of Signatory

(iii) Name and Seal of Tenderer

(iv) Date

(v) Place

TOTAL OF ALL SCHEDULES (1) TO (3)

UNCONDITIONAL REBATE

TOTAL OF ALL SCHEDULES (1) TO (3) AFTER APPLYING REBATE (RUPEES)

(i) In Figures

PART-2

PERCENTAGE RATE TENDERSCHEDULE (BILL) OF QUANTITIES

PERCENTAGE ABOVE(+) OR BELOW(-) THE ESTIMATED COST AS QUOTEDSCHEDULE DESCRIPTION ESTIMATED COST

(RUPEES)TOTAL QUOTED

AMOUNT IN FIGURES (Rs)

ABSTRACT OF COST

TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

1.1. CABLES1 PVC insulated armoured, unscreened, underground Railway signalling

cable conforming to IRS-S-63/2007.

(a) 2 core x 2.5 sq.mm. KM 17 92823 Rupees Ninety-Two Thousand,Eight Hundred Twenty-

Three Only

1577991

(b) 9 core x 1.5 sq.mm. KM 5 121657 Rupees One Lacs Twenty One Thousnad Six Hundred

Fifty Seven Only

608285

(c) 12 core x 1.5 sq.mm. KM 82 207585 Rupees Two Lacs Seven Thousand Five Hundred Eighty

Five Only

17021970

(d) 24 core x 1.5 sq.mm. KM 13.5 383103 Rupees Three Lacs Eighty Three Thousand One Hundred

Three Only

5171891

2 Cable Power Stranded Aluminium conductor PVC insulated as per IRS-S:63/2007 & IS 1554 (Part 1). 2 core x 25 sq.mm.

KM 5 130412 Rupees One Lacs Thirty Thousand Four Hundred

Twelve Only

652060

3 PVC Insulated Railway signalling Indoor Single Core Cable as per IRS:S-76/89 (Amendment-2)

i) 3x0.75mm. (Red/Black) 100 m coil 10 1745 Rupees One Thousand, Seven Hundred Forty-Five Only

17450

ii) 16 x 0.2 mm. 100 m coil 450 930 Rupees Nine Hundred And Thirty

Only

418500

iii) 1 x 10 mm. for battery 100 m coil 8 6106 Rupees Six Thousand One Hundred And Six Only

48848

SCHEDULE-1: SIGNALLING AND TELECOMMUNICATION WORK (SUPPLY)

DESCRIPTION OF ITEM

NAME OF WORK: Signalling and Telecommunication Works including Supply & Installation in connection with Augmentation of Rail Infrastructure Facilities for Harduaganj Thermal Power Station at Kasimpur, District: Aligarh, Uttar Pradesh.

S.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

Page 1 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

4 PVC Insulated RailwaySignalling indoor multicore cable 1.0 mm dia 60 coreto Spec. No. IRS-S-76/89.

KM 2.5 489426 Rupees Four Lacs Eighty Nine Thousand Four Hundred

Twenty Six Only

1223565

5 Underground Railway jelly filled 06 quad cable for signalling & telecominstallations conforming to TC-30/2005 (Ver-1) for RE area having 0.9 mmdia.

KM 4.00 339224 Rupees Three Lacs Thirty NineThousand Two Hundred

Twenty Four Only

1356896

6 Polytheneinsulated jelly filled telephonecable with poly aluminium moisturebarrier conforming to TC-41/97 - 0.5 mm dia 10 pair

KM 0.5 131050 Rupees One Lacs Thirty One Thousand Fifty Only

65525

7 RCC pipe 150 mm dia & 2 meter long with collar to specn. No. IS-458/1971. Nos. 100 466 Rupees Four Hunderd Sixty SixOnly

46600

8 Galvanised Iron pipe 100 mm dia 6m length 'B' class with end clamps asper specn. No. IS-1239, part 1/1990.

Nos. 100 1013 Rupees One Thousand Thirteen Only

101300

9 FRP cable route marker as per drawing no. RITES/SIG/Gen/48/08. Nos. 200 297 Rupees Two Hundred Ninty Seven Only

59400

1.2 COLOUR LIGHT SIGNALS10 Colour light signal unit (2 aspect) complete as per RDSO drg no. SA-23003

A/M (adv.) and IRS S-26/64 without transformer, three pin holder and bulbwith Tubular steel signal post 140 mm dia, 4.5mtr. long conforming toRDSO Drg. No. IRS-S- 6/81, signal base Cast Iron 140 mm dia conformingto RDSO Drg. No.2011/M, CLS Ladder complete with platform and baseconforming to RDSO Drg. No. SA-23153 (Adv.).

Nos. 7 23628 Rupees Twenty Three Thousand Six Hundred Twenty

Eight Only

165396

11 Position light shunt signal unit as per RDSO Drg. No. SA-23840 (adv.)without holder, lamps and lenses with Shunt signal post with base 90mmdia 1m long to RDSO Drg. No. SA23840 (Adv.) & IRS S-6/81 with OffsetBracket for large & small signal with U bolts and nuts for 140mm CLS postsas per RDSO Drg. No. SA23080 (Adv).

Nos. 40 5907 Rupees Five Thousand Nine Hundred Seven Only

236280

Page 2 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

12 Shunt signal dependent type with OFF set bracket and mountingarrangement as per RDSO Drg. No. SA23080 (advance) and IRS-S-10/78.

Nos. 6 2910 Rupees Two Thousand Nine Hundred Ten Only

17460

13 Free to shunt indicator with off set bracket with mounting arrangement Nos. 2 2910 Rupees Two Thousand Nine Hundred Ten Only

5820

14 Supply of 6-way junction type route indicator complete, with out lamp holderand with out lenses and lamps to IRS-S-66/84, IRS-S-23/8 with RDSOdrawing No. SA-23401(suitable for LED)

Nos. 1 31441 Rupees Thirty One Thousand, Four Hundred Forty-One Only

31441

15 Signal No. Plates as per Drg. RITES No. RITES/SIG/Gen/46/08 Nos. 42 481 Rupees Four Hundred Eighty One Only

20202

16 A/AG/C/P/G Board as per RDSO Drg. No. SA-23455-56 RST-11445 & SA-23476-77 as applicable.

Nos. 4 527 Rupees Five Hundred Twenty Seven Only

2108

17 Stop Board/BSLB/Goods Warning Board/ Legend Board with completefitting as per SEM.

Nos. 4 9225 Rupees Nine Thousand, Two Hundred Twenty Five Only

36900

18 Calling On signal Unit with fixing arrangement without lenses and lamp asper RDSO Drg. No. 24351(Adv.) Alt-I & S-23463.

Nos. 1 2870 Rupees Two Thousand, Eight Hundred Seventy Only

2870

19 Hand Cuff Locks Nos. 50 265 Rupees Two Hundred Sixty Five Only

13250

20 Hylam sheet, resin bonded 10 mm thick, grade P3 in standard size of 1.22 x1.22 Mtr. As per Specn. No. IS 2036 of 1974.

Nos. 30 4894 Rupees Four Thousand, Eight Hundred Ninety Four Only

146820

21 ARA Terminal Block made of PBT 6-way as per Drg. No. SA 23741 alt. 3and Specn. No. IRS-S-75/2006 disconnecting links as per Drg. No.RST/11336.

Nos. 350 43 Rupees Fourty Three Only 15050

22 Eight-wayTerminal strips, made of PBT, Isolating barrier type as per RDSOSPN No. IRS-S-79/92 & Drg. No. 24811 Alt.-1.

Nos. 220 262 Rupees Two Hundred Sixty Two Only

57640

Page 3 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

1.3 LENSE AND LED UNITS23 LED signal lighting unit for main signals (110V AC LED Signal) conforming

to RDSO Specs. RDSO/SPN/153/2004 (Rev. 3.0). This shall also includecurrent regulator and health monitoring unit, fuses and other accessoriesrequired for fixing.

(a) For Red aspect Nos. 7 8776 Rupees Eight Thousand, Seven Hundred Seventy

Six Only

61432

(b) For Yellow aspect Nos. 9 8776 Rupees Eight Thousand, Seven Hundred Seventy

Six Only

78984

24 LED signal lighting unit for shunt signal (110V AC/LED Signal) as perRDSO/ SPN/153/2004 including fuses & other accessories required forfixing.

Nos. 142 7966 Rupees Seven Thousand, NineHundred Sixty Six Only

1131172

25 LED signal lighting unit for calling on signal (110V AC LED Signal)conforming to RDSO/SPN/153/2004 (latest). This shall also include fusesand other accessories required for fixing.

Nos. 2 10260 Rupees Ten Thousand Two Hundred Sixty Only

20520

1.4 DC TRACK CIRCUITS 26 Track feed battery charger 110 V AC/2-6 V DC, amp charging rate suitable

to charge 1, 2 or 3 cells of 80 AH 2 Volts to IRS-S-89/93.Nos. 37 2110 Rupees Two Thousand One

Hundred Ten Only78070

27 B' type choke as per specification No. IRS-S-65/83. Nos. 68 2693 Rupees Two Thousand Six Hundred Ninty Three Only

183124

28 Track feed resistance 30 ohms as per RDSO Drg. No. SA 20166 M/Adv. Nos. 34 422 Rupees Four Hundred Twenty Two Only

14348

29 Lead acid secondary cells duly charged (low maintenance)of 80 AH 2 Voltas per RDSO specn. No. IRS:S 88/2004.

Nos. 68 1804 Rupees One Thousand Eight Hundred Four Only

122672

30 Fibre glass track lead junction boxes as per RITES Drg. No. RITES/SIG/GEN/42/08 alongwith 02 Nos. of 450mm long 38 mm dia HDPE pipe.

Nos. 105 954 Rupees Nine Hundred Fifty Four Only

100170

31 Channel bond pin single groove, tinned or zinc coated 7mm dia as perRDSO Specn. No. IRS:S-17/75 for bonding of track circuit wires.

Nos. 1700 1 Rupee One Only 1700

Page 4 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

32 G.I. Bond Wire soft 8 SWG for bonding. Kg. 300 1283 Rupees One Thousand Two Hundered Eighty Three Only

384900

33 Hydrometer (Graded), Exide make or similar for measuring specific gravityof Battery with mounting stand in location Boxes. Consignee inspectionunder manufacturer certificate shall apply.

Nos. 15 263 Rupees Two Hundred Sixty Three Only

3945

34 Track Relay-Plug in type, 9 ohms, style QTA 2, complete with plug boardretainingclip and connectors conforming to BRS-938 A, 939A, BRS-938 A,939A, 966,(Appendix F-2) IRS:S34 & IRS:S23.

Nos. 40 4937 Rupees Four Thousand Nine Hundred Thirty Seven Only

197480

1.5 POINT MACHINE35 Electrical Point Machine IRS heavy duty rotary locking type 143mm throw

conforming to RDSO Specn. No. IRS-S-24/ 2002 & IRS-S-37/82 & Drg.No. S-10910 for motor & assembly Drg. No. S- 10800.

Nos. 46 60757 Rupees Sixty Thousand Seven Hundred Fifty Seven Only

2794822

36 Ground fittings as per RDSO Drg. No. S-3361-62-63 suitable for pointmachine IRS:24/2002. The ground connection shall be procured only afterconfirmation from site engineer as per site condition and type of turnout.

Nos. 46 5401 Rupees Five Thousand Four Hundred One Only

248446

37 Supply of Pre wired Crank Handle cum key lock relay box along with LED'sTEKNIC make push buttons, 8 way terminal strips, string rods etc.

Nos. 1 10651 Rupees Ten Thousand Six Hundred Fifty One Only

10651

38 Fibre glass junction box with terminals as per IRS drawing no. SA-2010/ Mfor terminationof signalling cables for the use of point machines having size225 mm x 225mm with 02 nos. of 50 mm dia GI Pipes 500 mm long fixedon 900 mm long MS angle of size 50 mm x 50 mm x 5 mm.

Nos. 46 1773 Rupees One Thousand Seven Hundred Seventy Three Only

81558

39 Gauge Tie plate insulation as per RDSO Drg. No. T-10372 Alt. 2, T-10368,T-10371 Alt. 2 T-15083/88/Alt.2 and T-11690/ Alt.2 and to the Spec. IRS S23 & 40.

Sets 10 177 Rupees One Hundred Seventy Seven Only

1770

40 William stretcher insulation set (complete set). Sets 10 254 Rupees Two Hundred Fifty Four Only

2540

Page 5 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

41 Nylon insulation for D bracket for point machines as per Railway design a) Side Plate LH - 01 No.b) Side Plate RH -01 No.c) Bushes - 4 Nos.d) Washers (Nylon & Steel) - 04 Nos. each

Sets 60 635 Rupees Six Hundred Thirty Five Only

38100

1.6 LOCATION BOX42 Apparatus cases with miniature E-Type Locks both sides (One key and one

handle with four Apparatus cases or part thereof to be supplied).

(a) Single case as per RITES Drg. No. RITES/ SIG/GEN/43/08 with latestalterations.

Nos. 51 11742 Rupees Eleven Thousand Seven Hundred Forty Two Only

598842

(b) Half case as per RITES Drg. No. RITES/ SIG/GEN/44/08. with latestalteration.

Nos. 45 9789 Rupees Nine Thousand Seven Hundred Eighty Nine Only

440505

1.7 Level Crossing Gate43 Lifting Barrier Gate complete including pedestal, winch machine, stop post

& boom of 8.00 m length including boom locking as per RDSO design &drawing no. SA-8843-46, SA-8843A-46A(ADV), SA-8839-42, SA - 8839A-42A (ADV), SA - 8157A (ADV) , SA-8158/M/ADV.

Nos. 3 110500 Rupees One Lac Ten Thousand Five Hundred Only

331500

44 Boom locking arrangementcomplete as per practice of N.C. Railway ( Drg.No. SI-06678) for lifting barrier including plunger, crank adjustable,insulated rod joint, lug joint, point adjusting screw, CB etc. The transmissionof boom locking will be done by ROD run as per instruction of site engineer.

Nos. 3 17000 Rupees Seventeen Thousand Only

51000

Page 6 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

45 Materials required for lifting barrier:

i) ROD compensator (253x406 MW) complete with base, nuts & bolts as perRDSO drg. No. SA-3504/M/ADV/ALT-2(LATEST). Specn. No. IRS-S-10/78.

Nos. 3 1530 Rupees One Thousand Five Hundred Thirty Only

4590

ii) Solid joint 32 mm as per SA-6050/M(IRS) Nos. 45 187 Rupees One Hundred Eighty Seven Only

8415

iii) Accommodating crank 14" x 14" complete with base, nuts & bolts-'Medium'as per drg. No. SA-5857/M(Adv.)

Nos. 15 680 Rupees Six Hundred Eighty Only

10200

iv) Vertical Wheel one way AS PER Drg. No. SA-3008 (IRS) Nos. 9 170 Rupees One Hundred Seventy Only

1530

v) Vertical Wheel two way AS PER Spec. No. IRS-S-10 Nos. 3 337 Rupees Three Hundred Thirty Seven Only

1011

vi) Ground lever frame one way IRS Drg. No. SA-922/M Nos. 3 6800 Rupees Six Thousand Eight Hundred Only

20400

vii) Horizontal wheel (2 way) as per Drg. No. SA-3001/M/IRS Nos. 18 340 Rupees Three Hundred Forty Only

6120

viii) Wire adjuster, 12 mm as per Drg. No. SA-3100 (IRS) Nos. 7 136 Rupees One Hundred Thirty Six Only

952

ix) Rope wire 7/22 as per IRS - S-3 Mtr. 600 34 Rupees Thirty Four Only 20400

x) C.I. foundation 'A'/ 'B' type with holes Spec. IRS-S-10/78 (Latest) Nos. 35 1700 Rupees One Thousand Seven Hundred Only

59500

xi) ROD Insulator to Drg. No. SA-3637/M/ADV/ALT-2. Nos. 18 510 Rupees Five Hundred Ten Only

9180

46 Electric Lever Lock with Circuit Controller combined, 200mm stroke toRDSO Drg. No. SA-22701/M(ADV) with forced Drop Lock and EconomiserContact and slide notch. Drg. No. S-20258/14 M, Spec. no. IRS-S-23

Nos. 2 9257 Rupees Nine Thousand Two Hundred Fifty Seven Only

18514

47 E Type Lock with key Ward No. As per site requirement and as per Spec.no. IRS-S-30/64 & IRS-S-10 (Latest), Drg. No. SA-3473/M (ADV) (Latest)

Nos. 9 673 Rupees Six Hundred Seventy Three Only

6057

Page 7 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

1.8 ELECTRICAL (INDOOR)48 SMPS Integrated Power supply (IPS) system as per RDSO Drg. No.

SDO/IPS/SMPS/PI/ RE/004 & RDSO Specn. No. RDSO/SPN/ 165/2004with latest amendment. This shall be suitable for RE area. The contractorshall give the detailed configuration of various modules of IPS and get theapproval of RITES before supply. The configuration of different suppliesand their capacity shall be finalised by RITES. Essential Spare Modules ofIPS, Staff Training Programme and Earthing Work as per prescribedstandards will be a part of Supply.

Nos. 1 1861843 Rupees Eighteen Lacs Sixty One Thousand Eight Hundred

Forty Three Only

1861843

49 Single phase 10 KVA silent DG set of Mahindra/ Kirloskar/ Cummins make(CPCB approved) with sound proof enclosure (enclosure fabricated out ofbest quality steel sheet and insulated with highly sound absorbent material)complete with all accessories and one 40 Ltrs.Tank

Nos. 1 395871 Rupees Three Lacs Ninety FiveThousand Eight Hundred

Seventy One Only

395871

50 Relay AC immune, Plug in type, Style QNA1 DC neutral line relay 24 VDC(QNA1), 12F/4B contacts, metal to carbon complete with plug board,retaining clip & connectors conforming to BRS-931-A, IRS-S-34/ IRS-S-23/IRS-S-60.

Nos. 740 3883 Rupees Three Thousand Eight Hundred Eighty Three Only

2873420

51 Relay AC immune, Plug in type, Style QSPA1, 24 VDC, Slow to pickup8F/4B along with plug board, retaining clip and connectors conforming toBRS:933-A, IRS:S-34, IRS:S-23, IRS: S-60.

Nos. 50 3860 Rupees Three Thousand Eight Hundred Sixty Only

193000

52 Relay AC immune plug in type ,style QSRA1, 24VDC ,slow to release,8F/4B along with plug board, retaining clip & connectors conforming toBRS 934-A, IRS-S-60, IRS-S34 , IRS-S-23

Nos. 60 3860 Rupees Three Thousand Eight Hundred Sixty Only

231600

53 Relay AC immune, Plug in type, Style QNA1 DC neutral line relay 24 VDC(QNA1), 8F/8B contacts, metal to carbon complete with plug board retainingclip & connectors conforming to BRS-931-A. IRS-S-34/ IRS-S-23/ IRS-S-60.

Nos. 300 3883 Rupees Three Thousand Eight Hundred Eighty Three Only

1164900

54 Universal plug-in type AC lamp proving relay 4F/4B contacts (Metal tocarbon) for LED signal lamp Relay conforming to RDSO specificationSTS/E/Relays/AC lit LED signal/09 - 2002, BRS: 940, 941-A IRS:S-34 &IRS:S-23.

Nos. 100 4983 Rupees Four Thousand Nine Hundred Eighty Three Only

498300

Page 8 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

55 Electronic flasher relay 60 flashes per minute (workable on 24 V DC/110 VAC) or flasher relay for giving 60 flashes per minutes for the use in pointflashing circuit.

Nos. 8 1772 Rupees One Thousand Seven Hundred Seventy Two Only

14176

56 Relay DC, miniature based plug-in neutral line tractive armature pointcontactor AC immune 24VDC, 2F(HD)/ 4B contacts front and back metal tocarbon complete with plug board retaining clip and removable connectors.Style QBCA1 as per BRS 943, IRS-S-34, IRS: S-23, IRS: S-60.

Nos. 94 7596 Rupees Seven Thousand Five Hundred Ninety Six Only

714024

57 Relay rack assembly complete with fixtures and all accessories likescaffolding including ladder, runway for Indoor cable wires and 96 way tagblocks (6 nos. per rack) alongwith mounting arrangement etc.

Nos. 16 32784 Rupees Thirty Two Thousand Seven Hundred Eighty Four

Only

524544

58 Main cable termination rack complete with hylam sheet, scaffolding fixturesincluding ladder run way, rods, ladder frame base assembly, insulators, Jbolts nut & bolts with 96 way tag block (06 nos. per rack) alongwithmounting arrangements etc. as per RITES Drg. No. RITES/PO-LKO/SIG/73.

Nos. 5 33754 Rupees Thirty Three ThousandSeven Hundred Fifty Four Only

168770

59 Relay fail safe electronic time delay device mounted on Q series relay baseand covered with timing of 120 seconds conforming to IRS : S61 - 2000IRS: S-34 IRS : S-23

Nos. 11 5171 Rupees Five Thousand One Hundred Seventy One Only

56881

59 A Key Lock relay KLCR metal to carbon contacts Nos. 15 7796 Rupees Seven Thousand Seven Hundred Ninety Six Only

116940

60 Earth Leakagedetector with 8 channel for monitoring 4 AC channels and 4DC channels, 110 V AC and four channel card monitoring DC voltages(24V, 60V, 110V) of Reliance Electric or similar make.

Nos. 1 135014 Rupees One Lac Thirty Five Thousand Fourteen Only

135014

Page 9 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

61 LED type indication cum operating panel route setting (Entrance–Exit) typewith tag blocks, wires, angle iron etc. depicting the yard layout with signals,point, track circuit, operating/ emergency push buttons, counters withsealing arrangements and SM's key housed in steel metal made ofexchangeabledomino units each of size typically 54mmx34mm. Panel shallbe supplied completelywired & soldered alongwithpanel tag block analysis.Control panel diagram shall also be supplied by the contractor. All fusedLED's shall be replaced by contractor during testing period and the panelshould be covered with perspex sheet on the top to avoid damage to thepanel while in service. (One row each of dummy dominos to be providedontop & Bottom of the panel, one perspex sheet of 3mm thick and size1200mmx2400 mm to be supplied as spare. This also includes fabrication,screen printing of SWR board on white Formica of requisite size and itsfixing) NOTE:( a) 10% (minimum one no.) button of each colour, 20 LED'sof each colour and one counter shall be handed over as spare oncommissioning. (b) Also, 10 working Dominos with cover plates as perdescription approved by the Engineer-in charge should be supplied asspares. (c) Two Magnets, one buzzer and four bulb extractor should besupplied as spares. Tag block shall conform to RDSO specn. LED shouldwork on 24V.

Nos. 1 421919 Rupees Four Lac Twenty One Thousand Nine Hundred

Nineteen Only

421919

62 Data Logger with Power Supply arrangements complete as per RDSOSpec. No. IRS-S-99/2001. (1) Data logger shall have the following modules: (i) Processor module, (ii)Input module (Digital/Analog),(iii) Signal conditioning module, (iv) Printer 80Col. Dot Matrix.(2) The equipment shall cater for minimum 512 digital inputs (in the form ofvoltage free contacts) and 32 analog inputs. The system shall beexpandableup to 4096 digital and 96 analog inputs by expansion/cascadingthe similar equipment.

Nos. 1 548625 Rupees Five Lacs Fourty Eight Thousand Six Hundred Twenty

Five Only

548625

1.9 ACCESSORIES OF DATA LOGGER:63 Personale Computer, Spec - HP Business Desktop, 32-bit operating

system, Intel Core(TM) i5 650@ 3.2GHz 3.33Ghz, 500 GB SATA HDD2GB DDR II RAM COMBO DRIVE, 19" TFT Monitor 10/100/1000 LANCARD win XPP, Quickheal Anti Virus, Key Board, Optical Mouse, USB,Serial, Parallel Port with JBL Speakers, 56 KBPS Internal Modem,Windows7 professional with recovery CD along with 500 VA UPS with HPLaser Jet A4 Printer Model No. 1007 or Similar.

Nos. 2 39742 Rupees Thirty Nine Thousand Seven Hundred Forty Two

79484

Page 10 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

64 Ink Jet Printer Nos. 1 5330 Rupees Five Thousand Three Hundred Thirty Only

5330

65 Modem Card for networking Front and Processor (FEP with power supply) Nos. 1 25080 Rupees Twenty Five ThousandEighty Only

25080

1.10 MISCELLANEOUS

66 Fuse block made of PBT as per Drg. No. SA-23748. Nos. 300 136 Rupees One Hundred Thirty Six Only

40800

67 Non deteriorating type cartridge fuses as per IRS: S-78/92 of various ratingas per requirement.

Nos. 350 49 Rupees Forty Nine Only 17150

68 Office chair of continuous arms having plastic cane cover TW arm rest size36"x 21" x 22" approx, steel tubular frame gauge of pipes 25 mm dia x 18gauge with olive green colours, green stove annealed Godrej make.

Nos. 4 8101 Rupees Eight Thousand One Hundred One Only

32404

69 Office tables of size of table top 1224 mm x 610 mm height 750 mm with 3drawers on left side and one locker on right hand side. Olive brown withduplicate keys, olive green colour. Godrej make.

Nos. 2 27340 Rupees Twenty Seven Thousand Three Hundred Forty

Only

54680

70 Airy revolving and tilting working cane chair with arm rests of teakwood,polished black, the chair has plastic caned seat back on 25 mm roundtubular frame. The base is of pressed sheet metal. Godrej make width - 700mm , depth - 700 mm, height - 870 mm, adjustable seat height 410 mm to520 mm, colour - grey.

Nos. 2 12678 Rupees Twelve Thousand Six Hundred Seventy Eight Only

25356

71 Steel almirah medium size 66" x 33" x 18" with 4 adjustableshelves making5 compartments without locker having door of 20 SWG and body & shelvesof 22 SWG.

Nos. 2 27332 Rupees Twenty Seven Thousand Three Hundred

Thirty Two Only

54664

72 4 door book case of size 1675 x 840 x 308 mm to suit Godrej product No.0800.

Nos. 2 27332 Rupees Twenty Seven Thousand Three Hundred

Thirty Two Only

54664

Page 11 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

73 Design and preparationof detailed signalling circuits (route setting type) onthe basis of approved signalling plan, selection table and supply of sixcopies each of documents mentioned below alongwith original tracing on astandard 7.5 micron polyester film in AUTO CAD format with CD.(i) Cable route plan and cable core chart.(ii) Location box details plan.(iii) Cable termination details.(iv) Double Track Diagram for Track Circuit(v) Contact analysis(vi) Fuse analysis of the relay rack(vii) Tag block analysis for the relay rack(viii) C.T. Rack details(ix) Control Panel Diagram(x) Power Panel Diagram(xi) Relay rack arrangement(xii) Bus bar arrangement(xiii) Track bonding plan(xiv) Junction box details(xv) Insulated joint plan(xvi) Completion Drawings for the above in six sets

Per Station 1 126576 Rupees One Lac Twenty Six Thousand Five Hundred

Seventy Six Only

126576

74 Desk type Electronic MagnetoTelephonewith 2 Nos. Dry Cell as per RDSOSpec. No. RDSO/ SPN/TL/28/99 and IRS/TC/ 79/2000.

Nos. 10 4388 Rupees Four Thousand Three Hundred Eighty Eight Only

43880

75 Distilled water plant (De-mineraliser type) with stainless steel containercapable of delivering 3.5 to 4.5 ltrs. Per hour pure distilled water, including10 ltrs. Polythenejar (10 nos.) of good quality to be inspected by consigneebefore supply of distilled water plant. Note:- This includes installation also.

Nos. 1 23628 Rupees Twenty Three Thousand Six Hundred Twenty

Eight Only

23628

Page 12 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

76 Maintenance tool kit complete with following items:(i) Cutting Pliers (Taparia make) 200 mm insulated= 01 No.(ii) Nose Pliers Round insulated, 150 mm (Taparia make) = 01 No.(iii) Screw Driver adjustable with common handle for different screwdriver (Taparia make) = 01 No. (iv) Hammer Ball Pins, 1.5 lbs = 01 No.(v) Socket Spanner sets S-15 mm 19 Socket Plus 5 accessories (Tapariamake) = 01 set.(vi) Spanner double ended, 33 mm = 01 No.(vii) Electric Soldering Iron (Philips/ Soldron or similar make), 230V, 50/60WATT. = 01 No.(viii) Wire cutter insulated (Taparia make) = 01 No.(ix) Spanner Set Double End (Taparia make) = 01 No.(x) Wrench adjustable SF 305 mm (xi) Spanner Double Ended, 25 mm = 01 No.(xii) Megger, 0-500 Volt (Motwani make) = 01 No.(xiii) Megger, 0-100 Volt (Motwani make) = 01 No(xiv) Tool Box made of sheet iron as per Drg..(xv) Digital Multimeter with following range = 01 No. a) 0-750/1000 V AC/DC, b) 0-10 AMP, c) 0-1000 OHMS d) 3 1/2 digits. The meter shall be supplied with test probes, leather cover battery and is of reputed make like Philips/ Meco/ Rishabh/ Motwane.(xvi) Grease Gun = 01 No

Nos. 1 81510 Rupees Eighty One Thousand Five Hundred Ten Only

81510

77 Supply of Earth electrode assembly as per drawing no. RITES/SIG/GEN/013-98

Nos. 50 1703 Rupees One Thousand Seven Hundred Three Only

85150

SUB TOTAL OF SCHEDULE-1 46936821

In Figures

In Words

In Figures

In Words

Total Quoted amount (Rs.)

Percentage above(+) or below(-) on total estimated cost as quoted

Page 13 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

2.1 CABLING WORK1 Excavationof cable trench as per cable route plan, 1 mtr. deep and 300 mm

wide along side of the track in all types of soil, conforming to distances asper cable route plan & refilling after cable laying as per Extant Practice onRailway and instruction of Site Engineer. This work includes covering ofcable in trenches by loose soil for a layer of 50 mm thickness approximatelybefore covering by bricks and then refilling by loose soil.

Metre 5100 57 Rupees Fifty Seven Only 290700

2 Excavationof trenches 300 mm wide 300 mm deep on concrete/ metalled/stone paved road or on platform, laying of 2 wires in the GI pipe for pullingthe cable and refilling the trench, repairing the excavatedarea to its originalcondition and disposal of extra soil.

Metre 70 156 Rupees One Hundred Fifty Six Only

10920

3 Preparation of cable duct 150mm wide x 200mm deep in rocky area andrefilling the duct (after cable laying) with concrete mixture of proportion1:3:6and grouting the ends of the either side of the rocky portion using concretemixture with contractor's own cement & other required materials as per thestandard practice and instructions of site engineer.

Metre 60 368 Rupees Three Hundred Sixty Eight Only

22080

4 Cement concreting in 1:3:6 with contractor's own material including Cementon specific instructions of site Engineer.

Cum. 30 3440 Rupees Three Thousand Four Hundred Forty Only

103200

5 Fixing of GI pipes for crossing the culverts, bridges etc. and concreting ofends with brick masonry at both ends as per RITES's Drg. No. RITES/SIG/GEN/38-98 and as per the instruction of Engineer.

Metre 100.00 189 Rupees One Hundred Eighty Nine Only

18900

6 Excavationof cable trench 1 m deep and 300 mm wide across the track, fortrack crossing and refilling after laying of RCC pipes. In case of depth oftrench being less than 1 mtr due to site conditions, only proportionatepayment will be made. The work shall be done as per extant practice onRailway and as per the instructions of Engineer.

Metre 100 77 Rupees Seventy Seven Only 7700

7 Supply & placing of second-class bricks of standard size 225 mm x 100mm x 75 mm, 9 bricks per meter horizontallywidth wise, in the trench aftercovering the laid cable with soft soil of 50mm thickness.

100 Nos. 450 325 Rupees Three Hundred TwentyFive Only

146250

SCHEDULE-2: SIGNALLING AND TELECOMMUNICATION WORK (EXECUTION)

Page 14 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

8 Laying of signalling/Telecom/Power/Quad Cable in the trench/GI/RCC pipe/chase rock cutting etc. coming in the route of cable route plan (Note: beforeissuing of cable to the contractor, the cable will be meggered jointly by thecontractor and RITES Engineer at site and meggering certificate will besubmitted in the office of the Engineer In Charge. The same procedure willbe adopted after the cable is laid at site without which no payment will bemade to the contractor. If the insulation resistance after laying of cable isless than the reading of previous meggering report, the contractor will haveto repair or replace the defective cable at his own cost for which no chargeswill be paid by RITES/UPRVUNL). This also includes making of suitabletelecom and signalling cable joints as per standard practice and as perinstructions of Engineer.

KM 118 1225 Rupees One Thousand Two Hundred Twenty Five Only

144550

9 Fixing/ laying of RCC pipes for laying of cables (including under-neath thetrack, Road crossing or other platform cutting etc. as per drg.No. RITES/SIG/GEN/028-98 & RITES/SIG/GEN/031-98

Metre 100.00 34 Rupees Thirty Four Only 3400

10 Placing and securing of cable route markers in trenches at the specifiedintervaland at diversions, joints etc. along the cable route. The work shall bedone as per extant practice on Railways and the instruction of Engineer.

Nos. 200 11 Rupees Eleven only 2200

2.2 COLOUR LIGHT SIGNALS11 Excavation of pit, casting and plastering of concrete foundation for C.L.

Signal and Ladder as per RITES Drg. No.SIG/GEN/001-98 withcontractor's own materials including cement, sand & ballast (1:3:6) andanchor bolts of standard size. The required scaffolding & formwork etc. forcasting of foundation will have to be brought by the contractor at his owncost.

Nos. 7 10063 Rupees Ten Thousand Sixty Three Only

70441

12 Erection of surface base, signal post, signal unit on top or offset bracket.Fixing of ladder with platform and guards, signal name plates/ boards if anywith contractor's own brackets and fixing materials. This also includeserection of auxiliary signals like calling on, shunt signal & route indicator ifany. The work shall be done as per instructions of Engineer.

Nos. 7 3055 Rupees Three Thousand Fifty Five Only

21385

Page 15 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

13 Fixing of Jn. Route Indicator 1-Way/2-Way/3-Way/5-Way on the top of thesignal post.

Nos. 1 458 Rupees Four Hundred Fifty Eight Only

458

14 Fixing of Stop Board, Block section limit Board, Goods Warning Board withcontractor's own material. The work shall be done as per instruction ofEngineer.

Nos. 4 509 Rupees Five Hundred Nine Only

2036

2.3 SHUNT SIGNAL15 Excavationand casting of Shunt Signal foundation as per RITES Drg. No.

RITES/ SIG/GEN/002-98 with Contractor's own materials including cement,sand & stone chips in the ratio of 1:3:6 and Anchor Bolts of Standard size.The required scaffolding, formwork etc. for casting of foundationwill have tobe brought by the Contractort at his own cost.

Nos. 39 2837 Rupees Two Thousand Eight Hundred Thirty Seven Only

110643

16 Erection of shunt signal along with Surface Base, Post, Signal unit andfixing of No. Plates. The work shall be done as per instructions of Engineer.

Nos. 46 448 Rupees Four Hundred Forty Eight Only

20608

17 Termination of tail cable on Main signal units and wiring with contractor'sown material, fixing of LED etc. including auxiliary signals. The work shall bdone as per instruction of Engineer.

Nos. 200 962 Rupees Nine Hundred Sixty Two Only

192400

18 Termination of tail cable on shunt/ calling on signal units and wiring withcontractor's own material, fixing of LED etc. including auxiliarysignals. Thework shall be done as per instruction of Engineer.

Nos. 1700 332 Rupees Three Hundred Thirty Two Only

564400

2.4 LOCATION BOX19 Excavationof pit, casting of foundation and Erection of Apparatus case with

contractor's own Cement, Sand and Ballast 1:3:6 and other materials forfoundation, anchor bolts & nuts. This includes filling of location foundationswith river bed sand and plastering on top.

(a) Single case as per RITES Drg. No. RITES/SIG/ GEN/003/98 Nos. 51 5125 Rupees Five Thousand One Hundred Twenty Five Only

261375

(b) Half case as per RITES Drg. No. RITES/SIG/ GEN/004/98 Nos. 45 4233 Rupees Four Thousand Two Hundred Thirty Three Only

190485

Page 16 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

20 Supply, fabrication and fixing of hylam board in location box by providing allfixtures as per drawing including fixing of PVC coated string rods at theback side for cable support with contractor's own materials. The work shallbe done as per drawing and as per instruction of Engineer.

(a) Single case Nos. 52 2010 Rupees Two Thousand Ten Only

104520

(b) Half Case Nos. 45 1205 Rupees One Thousand Two Hundred Five Only

54225

21 Fixing of ARA Terminals / Eight-Way Terminal Strips and Fuse Blocks withprovision of holes on hylam sheets and fixing by galvanisednuts and bolts(to be supplied by contractor). This includes provision of two additionalholes on the hylam board on either side for cable conductor entry. The workshall be done as per the instruction of Engineer.

Nos. 650 16 Rupees Sixteen Only 10400

22 Termination of cable cores on ARA terminal/fuse blocks, 8 way terminalsblock in the apparatus cases/ cable termination rack. This includes allassociated works of pulling out the cable from ground. The work shall bedone as per location plans and instructions of Engineer at site will be majoras per work.

per Conductor

65000 10 Rupees Ten Only 650000

23 Installation of Equipments (Relays, resistance, chargers, choke & batteriesetc.) and wiring of the same in apparatus case etc. and wiring of the sameas per location and circuit diagrams with contractor's own wiring materialand Relay fixing frame and clamping of cables. The work shall be done asper instruction of Engineer and as per Drgs.

(a) Single case Nos. 52 1406 Rupees One Thousand Four Hundred Six Only

73112

(b) Half Case Nos. 45 1206 Rupees One Thousand Two Hundred Six Only

54270

2.5 DC TRACK CIRCUIT24 Erection, fixing & fitting of Track Lead Junction Box and lead wire rail

connections with contractor's fixing material including supply & fixing ofangle of size 75x75x6, 750 mm long. This will include drilling of holes in therail & soldering of Cable 2C x 2.5sqmm as per technical specifications &instructions of Engineer at site. This includes commissioning of trackcircuit.

Nos. 100 772 Rupees Seven Hundred Seventy Two Only

77200

Page 17 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

25 Provision of bonding with GI wires for track jumper & fishplated joints. Thiswill include drilling of 7.1 mm dia holes in rails (4 nos) and provision of twojumpers for each bond, clipping of bonds etc. with contractor's ownmaterials and tools as per instruction of Engineer.

Nos. 700 80 Rupees Eighty Only 56000

2.6 POINT MACHINE26 Fixing of Point Machine on newly laid / existing turnout on Wooden/PSC

sleepers and fixing of ground connections with junction box. This willinclude supply and fixing of bent pipe with welded frame for cable entry inthe point machine and termination of tail cable. Adjustment and testing withcrank handle / electrical operations, servicing of point machine & supply &filling of SAE 30 lubricating oil (500 ml approx). This will also includenecessary adjustment and smithy work, drilling of holes to tongue rails,fitting of insulation for tongue attachment, gauge plate and Williamstretcher. The work shall be done as per extant practice on Railways andthe instruction of Engineer.

Per T/O 43 10311 Rupees One Thousand Three Hundred Eleven Only

443373

2.7 L-XING GATES27 Installation of Lifting Barrier, one way ground Lever, Winch Machine,

Pedestal, Stop Post for level crossing gate. This includes excavationof pit,casting of foundations for fixing of pedestal, GF Lever, stop posts, cranks,compensators, winch machine, provision of positive boom lockingarrangement, wiring and adjustment for operation of winch machine. Thisincludes casting of foundation (A/B type), ROD run transmission withprovision of ROD/WIRE insulators, E-Type lock as per standard practice ofRailway. Nuts & Bolts, cement, sand, stone chips etc. shall be supplied bythe contractor.

Nos. 3 68000 Rupees Sixty Eight Thousand Only

204000

Page 18 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

28 Fixing of Lever Lock with Circuit controller 200mm. All fixing materials shallbe supplied by the contractor. This includes preparationof down rod and itsconnection, notch cutting of lever lock and adjustment.

Nos. 2 2525 Rupees Two Thousand Five Hundred Twenty Five Only

5050

29 Installation and commissioning of magneto telephones between stationmaster and any other locations like level crossing gates, siding points etc.The necessary stand for keeping the magneto/optical telephone shall alsobe provided. In this connection all materials shall be supplied by thecontractor at his own cost except magneto telephone.

Nos. 10 877 Rupees Eight Hundred SeventySeven Only

8770

2.8 ELECTRICAL ERECTION (INDOOR)30 Installation, wiring, testing and commissioning of integrated power supply

arrangements by Manufacturer's Engineer and as per instruction ofEngineer. (All Installation and Wiring Materials to be supplied by Contractor)

Nos. 1 65459 Rupees Sixty Five Thousand Four Hundred Fifty Nine Only

65459

31 Installation of relay rack assembly including IDF pillars complete with wallsupports, scaffolding, ladders, run way for cables, relay base plates, tagblocks as per extant practice on Railway and as per instruction of engineerwith contractor's own materialsviz shock absorber, nut, bolts, masonryworketc.

Nos. 16 2455 Rupees Two Thousand Four Hundred Fifty Five Only

39280

32 Installation of main cable termination rack assembly including IDF pillarscomplete with wall supports, scaffolding, ladders, run way for cables , tagbolcks as per extant practice on railwayand as per instruction of engineeratsite with contractor's own materials viz shock absorber, nut, bolts, masonrywork etc.

Nos. 5 2455 Rupees Two Thousand Four Hundred Fifty Five Only

12275

33 Complete wiring of relay base plate to other base plate/tag block as perapproved wiring diagram. This includes fixing of relay plug boards, fuseblock providing of PVC sleeve on wire supports and dressing, lacing etc.This include supply of condenser, resistance etc. as per approved wiringdiagram and its testing and commissioning.

per station 1 262654 Rupees Two Lacs Sixty Two Thousand Six Hundred Fifty

Four Only

262654

34 Installation, wiring, testing & commissioning of LED based operating panel.This includes termination of cable duly fixed with clamps and othermiscellaneous activities to complete the job and its commissioning.

per station 1 45004 Rupees Fourty Five Thousand Four Only

45004

Page 19 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

35 Installationwiring , testing and commissioning of KLCR relay . This includesfixing of KLCR relayon Hylam sheet , terminationof cables , wiring of KLCRrelay , supply of Hylam sheet wiring materials nuts & bolts & fabrication ofKLCR box etc

Nos. 15 3437 Rupees Three Thousand Four Hundred Thirty Seven Only

51555

36 Installation of DG set, testing and commissioning. This includes casting ofvibration free foundation, installation of control panel, outlet for exhaust,laying of power cable from DG room to ASM room for remote operation ofDG set and wiring of DG set to control panel. Laying of cables/wires shouldbe carried out in HD PVC channel/ conduit pipe. This includes cost of allmaterials required for installation except DG set control panel, wires/cablesas extant practice on Railways and instruction of Engineer.

Per KVA 10 833 Rupees Eight Hundred Thirty Three Only

8330

37 Painting two coats of enamel paint over one coat of Red oxideprimer on thefollowing items after scrapping and cleaning of the surface wherevernecessary. Primer & paints both Asian paints make are to be supplied bycontractor. Location boxes inside & outside surfaces shall be painted withaluminium paint as per extant practice on Railways.

i) Location Box Single Nos. 52 738 Rupees Seven Hundred EightyEight Only

38376

ii) Location Box Half Nos. 45 574 Rupees Five Hundred Seventy Four Only

25830

iii) Track Lead Junction Box Nos. 100 56 Rupees Fifty Six Only 560038 Painting of Main signal post with signal unit, shunt signal, Jn.indicator,

Surfaces base completewith fittings as per Rlys. Standard practice & SEM.This includes painting of calling on signal also.

Nos. 7 1146 Rupees One Thousand One Hundred Fourty Six Only

8022

39 Painting of Shunt signal post with signal unit and surface base. Nos. 46 491 Rupees Four Hundred Ninty One Only

22586

40 Painting Level Crossing gate and associated equipment & accessories. Nos. 3.00 3912 Rupees Three Thousand Nine Hundred Twelve Only

11736

41 Painting of Point machine with ground connections complete (point machinewith black enamel & ground connection with Red oxide).

Nos. 43 491 Rupees Four Hundred Ninty One

21113

Page 20 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

42 Lettering, numbering of signal, point machine, track lead junction box, blockjoint, apparatus case etc(Individual text shall be taken as one item).

Nos. 190 10 Rupees Ten Only 1900

43 Lettering,numbering, terminationparticulars equipmentnames etc. legibly&neatly in side location box.

(i) Single Nos. 52 135 Rupees One Hundred Thirty Five Only

7020

(ii) Half Nos. 45 130 Rupees One Hundred Thirty Only

5850

44 Installation of Earth Electrode and connecting to location box, signal unit,block instruments, power equipments, cables etc. through GI wire 8SWGsuitably on MS Plate size 40mmx5mm as per RITES Drg. No.RITES/SIG/GEN/013-98 OR RITES/SIG/GEN/015-98 ORRITES/SIG/GEN/016-98 OR RITES/SIG/GEN/017-98. This includesdigging of pit in earth 3m deep, casting of cement concrete enclosure as perRITES Drg. No. RITES/SIG/GEN/014-98, soil treatment as per standardpractice involving supply and pouring of salt & charcoal, connecting theequipment through earth lead wire & soldering including supply of cement,wiring material and soldering materials etc.

Nos. 50 1963 Rupees One Thousand Nine Hundred Sixty Threee Only

98150

SUB TOTAL OF SCHEDULE-2 4655791

In Figures

In Words

In Figures

In Words

Percentage above(+) or below(-) on total estimated cost as quoted

Total Quoted amount (Rs.)

Page 21 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

3.1 SUPPLY1 Supply of VF tapping transformers as per IRS/TC-22-76 of impedance ratio

1120:470.Nos. 5 726 Rupees Seven Hundred

Twenty Six Only3630

2 Supply of VF tapping transformers as per IRS/TC-22-76 of impedance ratio622:470.

Nos. 5 726 Rupees Seven Hundred Twenty Six Only

3630

3 Supply of one quad VF 2-T transformers joint assembly of VF transformers1120:470 as per IRS/TC-76-2000

Nos. 4 726 Rupees Seven Hundred Twenty Six Only

2904

4 Supply of 4 wire 4 way cable repeater equipments as per RDSO Spec. NoRDSO/SPN/34/2002 with prewired rack, suitable for 4/6 quad cable withwall mounting arrangement consisting of:Cable termination panel having Krone connectors suitable for terminating4/6 quad cable, distribution and interconnection etc.Link Panel complete with U links suitable for terminating 16 pairs -2 NosAmplifier Equalizer Equipment suitable for for Quads -DTMF Train TrafficControl System.Isolation transformer suitable for 4 Quad cable.Remote monitoring system - 1 No.PCB containing 2 Nos. of 4 wire way station Equipment in single PCB withDTMF Decoder and Telephones -2 Nos. Power supply chargers (230V AC - 12 VDC 2Amp) -2NosAutomatic electronic power supply management system -1 No.12V-40 AH maintenance free battery set - 2Nos.Local Monitoring System -1No.

Nos. 2 227288 Rupees Two Lacs Twenty Seven Thousand Two Hundred

Eighty Eight Only

454576

5 Digital Earth Resistance Tester (3.5 digit Liquid Crystal Display) 0-10/1000Ohms.

Nos. 1 8334 Rupees Eight Thousand Threee Hundred Thirty Four

Only

8334

6 Cable Fault Locator Nos. 1 45458 Rupees Fourty Five Thousand Four Hundred Fifty Eight Only

45458

7 TMS Kit as per RDSO Spec. No IRS TC:43-87. Nos. 1 43185 Rupees Fourty Three Thousand One Hundred Eighty

Five Only

43185

SCHEDULE-3: TELECOMMUNICATION WORK

Page 22 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

8 Electronic Magneto Telephone Desk Type as per RDSO SPEC No IRSTC:79/2000

Nos. 3 4092 Rupees Four Thousand Ninty Two Only

12276

9 VHF Mobile, Synthesized Trans Receiver GM-338 Radio, 128 channelswith channel wise programming 1-25W, 12.5/25KHZ channel spacing 14digital at phenomic LED display, Palmtop, microphone, programmableemergency SOS code, transmission, internal speaker & power cable 30meter with each set along with following. 3dB ground plane VHF antenna with VHF female connector for GM-338Radio.12 Volt DC power supply unit 10 ampere with battery revert. BNC male to UHF Female Adapter for GM-338

Nos. 2 45458 Rupees Fourty Five Thousand Four Hundred Fifty Eight Only

90916

10 Motorola VHF hand held synthesized transreceiver model GP328, withemergency feature, internal box, 16 programmable channels 12.5/25 KHZchannel spacing, switchable RF power level, Ten tagging Heliflex antennaand 1450 MAH (averagecapacity) NI - MH battery with one set (two no foreach set) spare NI-Mh battery, 1450 MAH pack for GP-328 along withsingle unit Rapid rate Tri-chemistry battery charger with adapter for GP-328Radio should also be supplied (frequency band will be intimated)

Nos. 10 33336 Rupees Thirty Three ThousandThree Hundred Thirty Six Only

333360

11 Supply of a through line VHF Watt meter to measure the out put power. Themeasuring range of the meter shall be 0 to 25 watt in frequency range 146MHz to 174 MHz along with the accessories like power supply cable,measuring cable, connectors, sensor elements and dummy load etc. - oneset each for 5 watt and 25 watt VHF set.

Set 1 40155 Rupees Fourty Thousand One Hundred Fifty Five Only

40155

12 Supply of 4W DTMF control telephone suitable for cable repeater as perRDSO specification IRS/TC- 38-97.

Nos. 3 1568 One Thousand Five Hundred Sixty Eight Only

4704

13 Universal way side control telephone as per specification no. IRS/TC-82-05.Nos. 3 4973 Four Thousand Nine Hundred seventy Three Only

14919

3.2 SERVICES14 Earthing arrangement in Panel room as per applicable Drawing Nos. 3 5910 Rupees Five Thousand Nine

Hundred Ten Only17730

Page 23 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

15 Supply of 5 pair switch board telephone cable as per IRS :TC 24-91 forindoor wiring inside ASM's room and in control office. Contractor will also dothe wiring work using their own wiring material viz. PVC channel, PVCflexible pipe, screws & other dressing material required.

Metre 100 144 Rupees One Hundred Fourty Four Only

14400

16 Installation & commissioning of 4 wire repeater equipment. This includeserection of rack, termination of cable on repeater rack as per directive ofEngineer. Installation of battery & battery charger along with their wiring.This also includes connecting of 230 V AC supply from selected supplycoming to ASM office. All wiring will be done in PVC channel of suitablesizes. All materials in this connection shall be supplied by the contractor.

per JOB 2 28336 Rupees Twenty Eight Thousand Three Hundred

Thirty Six Only

56672

17 Supply & fixing of GI pipe 50mm, dia 8m long at the top of the building(Panel Room) with U clamp, nut & bolts guyeded with three wires anderection of antenna. All materials required to complete the activity will besupplied by the contractor.

Nos. 2 212893 Rupees Two Lacs Twelve Thousand Eight hundred Ninty

Three Only

425786

18 Fixing of Omni directional antenna on the top of the above mast as well aslaying and fixing of RF cable from the antenna to ASM office. The materialrequired for fixing of antenna and RF cable shall be supplied by thecontractor. RF cable shall be laid inside PVC channel/PVC pipe inside theASM room.

Nos. 2 4546 Rupees Four Thousand Five Hundred Fourty Six Only

9092

19 Installation, testing and commissioning of battery charger, maintenancefreebattery and 25 Watt VHF transreceiver with accessories at each station.Necessary wiring between various equipments for the installation andcommissioning shall be done by the contractor. Material for the variouswirings and fixing shall also be supplied by the contractor. All the wiringshall be done in PVC channel/ pipe inside the ASM room.

Nos. 2 4546 Rupees Four Thousand Five Hundred Fourty Six Only

9092

3.3 CABLING SURVEY20 Location survey of cable route, preparation of cable route plan, termination

plan, jointing schedules and tapping charts etc. for installation andcommissioning of control 6 Quad cable and 10 pair U/G PIJF cablecommunication system. Approved drawings and documents shall besupplied in 6 hard copies alongwith 2 soft copies in Auto-cad of Latestversion.

KM 4 7576 Rupees Seven Thousand Five Hundred Seventy Six Only

30304

21 Supply & provision of derivation joint in 6 quad to 10 pair PIJF cable atstation, LC Gate etc. using thermo shrink jointing kit as per RDSOSpecification No. IRS TC -77-2000. This includes all material required forcompleting the joints.

Nos. 8 8788 Rupees Eight Thousand SevenHundred Eighty Eight Only

70304

Page 24 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)

TENDER No.16/PPMM/CE(C)/H/11-12

AMOUNTIn Figures

(Rs)In Words

(Rs)In Figures

(Rs)(1) (2) (3) (4) (5a) (5b) (5c)

DESCRIPTION OF ITEMS.N. QUANTITY

ESTIMATED COST (RUPEES)UNIT RATEUNIT

22 Supply & installationof GI pipe 50mm dia and fixing on the wall with clamps,grouting, nut/bolts in Panel room etc.

Metre 8 592 Rupees Five Hundred Ninty Two Only

4736

23 Supply & Installation of 20 pair Krone DP boxes including Krone connectorfor 20 pairs and termination of cable. This includes all materials for fixingincluding wall board, nut-bolt, Screws & dressing material etc.

Nos. 6 1440 Rupees One Thousand Four Hundred Forty Only

8640

SUB TOTAL OF SCHEDULE-3 1704803

In Figures

In Words

In Figures

In Words

Total Quoted amount (Rs.)

Percentage above(+) or below(-) on total estimated cost as quoted

Page 25 of 25 TENDER FOR SIGNALLING AND TELECOMMUNICATION WORKS (PART-2 FINANCIAL BID)